Eventing between iView on different pages and different models

Hi guys,
Though I read carefully as many related posts as possible,
I haven’t been able to determine a definite answer to the following question.
I am creating an ‘application’ that will show several graphs about a month n in the portal.  Each graph is an iView in a different page, and I want the iViews to be completely independent.  I mean, I can’t go for the option of having all the iViews in the same model.
Therefore, I have to design each iView with an event in,
They would receive as parameter, the month n issued as event out of a first iView.
I have not been able to have those iView communicating with each others up to now.
I saw that maybe Guided Procedure would be an alternative, but fear that I then have to pass in the graphs in the exact same following order each time, which I want to avoid.
Any pointer is welcome.
Ch

Thanks for your trial, Jan.
Using one single model is not an option (and I know how to do it should I decide to go that way).
Think about authorizations, for instance : user1 can see graph a b c and user2 can see graph a d e. 
If the graphs are all in a big iView, I can't segregate graphs b c d e that are not common to the two users.  If each graph is in a different iView/page, I can assign them one by one.
Another application of the concept : if I have a 'summary' page and a 'detailed' page, showing the same graph but at a different size, for instance : going for the 'indenpendancy' solution allows me to re-use exactly the same iView, just the layout properties would be changed at 'portal' level.
Ch

Similar Messages

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • My ipad is jumping from different pages and it looks like someone is typing on the page.

    Hi my ipad has started jumping from different pages and then the keyboard comes up and it looks like someone else is typing on the screen, can anyone help?

    You can try these things first and see if they help at all.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit all apps and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • My Ipad got wet in the rain. Unfortunately it was in my bag it was in sleep mode. Now i am not able to switch it off and it automatically selects different pages and Icons.What should i do. Please help

    My Ipad got wet in the rain. Unfortunately it was in my bag it was in sleep mode. Now i am not able to switch it off and it automatically selects different pages and Icons.What should i do. Please help

    Solutions for wet iPad.
    http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
    http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
     Cheers, Tom

  • Print different pages in different computers

    Hi Gurus,
    I am using BIP standalone 10.1.3.4. My report seems showing different pages in different computers when I try to print in pdf format. Is there any way to solve it
    E.g.
    Computer A ->7 pgs when I press view in pdf
    Computer B -> 9 pgs when I press view in pdf
    Both on the same template
    Rgds,
    Raymond

    Hi Raymond
    Seeing as the document is generated on the server ie the client has nothing to do with it other than requesting the document I can not see how its generating an extra two pages on one of the clients. Whats the difference between the two documents? Same amount of data?
    Regardsa
    Tim

  • HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

    My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

    Update: It seems as though the phone will charge if I plug it in and then turn it off.  It will not charge while the phone is on.  Also iTunes will not recognize it, so I can't sync or anything.  I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

  • HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

    Can I put the same information on two different i-phones with different numbers and different ID's?

    Yes and no it really depends on what information you are putting on the devices.

  • TS2771 My ipod touch will not hare no matter what and I've tried many different cables and different ways to charge it. What should I do? If I complain to the Apple store co. will they replace my ipod for free?

    My ipod touch will not hare no matter what and I've tried many different cables and different ways to charge it. What should I do? If I complain to the Apple store co. will they replace my ipod for free?

    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug

    I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug in holes, I've left it for the night and tired again this morning.

    Error code 9006 is related to the computer's security software settings, 39 is not listed inResolve iOS update and restore errors try turning the security/anti-virus software off if you are using something like that.  Then you may need to restore via the recovery mode since that is what the graphic of a USB wire connecting to iTunes means, it has already entered recovery mode...see http://support.apple.com/kb/HT1808 for instructions on recovery mode restoring.

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • Eventing between iView and nested iView

    I try to make an Event between an iView and an nested iView. I followed the instruction on page 164 in the reference guide and tried some other things, but it doesn´t work. I make an output Port on the one side, there i could select the fields to be displayed. But when I compose the Input Port , there are no field to see.
    So what make I wrong?

    Hello Marcus,
    the main thing about the desired eventing seems to be that when you have placed your data service in the nested iview you have to create a signal-in port<b> by pulling a data connection out of the input port of the data service</b> to create the input-port of your nested iView. Only this way, the port is filled with the input data of the data service.
    Back in your main iView you can connect the data flow to the newly created port of your nested iView the same way as you connect to a data service. You then should see the input fields of the data service that you placed in the nested iView and be able to assign values to the input fields.
    Hope that helps
    cheers
    Gerhard

  • 2 main windows in 2 different pages with different layouts

    Hi Guru's,
    I'm working on Smartforms.
    My problem is, i have 2 different pages with 2 diiferent main windows.
    The First Page lasts after 7 pages of Data Printing.
    It is coming corrctly.
    I've assign the Next Page as Second Page in the First Page and i'm maintaining a condition in the First Page to go to the Second page.
    Everything is working fine, but in the second page i'm not getting the Main Window.
    What could be the Problem??? Why the control is not going to main window of second page???
    Thanks in advance.
    Regards,
    Adi.

    Try like this:
    1. Set the Next page of the FIRST as FIRST
    2. In the MAIN window of the FIRST, after completing the TABLE, create a command which calls the SECOND PAGE.
    3. In SECOND page, create a MAIN window, with differnet name. If you create a same name, system will automatically refer the MAIN window in the FIRST page.
    4. Set the next page of the SECOND as SECOND.
    Regards,
    Naimesh Patel

  • How to navigate to different page with different user name

    Hi,
    I have created a DB application....
    My application consist of 4 pages.......
    But if the first user logs into an application means, he needs to see only 3rd page
    If the second user logs into an application means, he needs to see only 4th page.......
    (i.e) 3rd page couldnot been accessible by the second user........
    and 4th page couldnot been accessible by the first user.......
    How to achieve this, i think i need to set some validation in the login page.....if so how to do that.....
    it is an urgency....help me friends....
    Regards,
    Harry...

    Hi,
    Thanks for your reply, so i need to create a post authentication for redirecting to different page as you said....
    Since these are my two pages(in the application)
    *) issues page.
    *) analyst page.
    Suppose if the User A login to the issues page(via. login page) he needs to see only the issues page
    if the User B login to the analyst page(via. login page) he needs to see only the analyst page...
    Since User A and B have access to the application.....
    But A should login only to issues page in my application and he should not login to the analyst page...
    and B should login only to analyst page in my application and he should not login to the issues page...
    For that where i need to define the post authentication...whether in login page i need to define.....
    if so, whether i need to define sql query for restricting the users to the particular page in the post authentication...
    Regards,
    Harry...

  • A gap between iViews in a page

    Hello all,
    Usually the topLevelNavigation is in the framWorkPage as an iView.
    We created a new page (wide:narrow)
    in the wide column inserted the topLevelNavigation iView, in the narrow column: our company logo.
    The problem: there is a gap around both iViews in the page.
    <b>How can we get rid of this gap?</b>
    Here is a picture of the new page:
    <a href="http://www.badongo.com/pic/290211">a picture</a>
    By the way:
    in the iViews and the page: the property 'Add padding inside tray' is checked as NO.
    In the theme --> Portal body --> we changed all the paddings and margins to 0 px. we think it didn't help cause this page is not a part of the portal inner page and therefore not part of the body (?)
    Thanks for any help, Adi.

    Hi Adi,
    the reason you see the gap is the PageLayout you use. The standard PageLayout "wide:narrow" defines a gap between the two columsn. I think 2px.
    To solve the problem download the par file, which contains the standard "wide:narrow" layout and make a copy. Use your own namespace for the copy of the par file.
    Edit the layout and upload the edited copy.
    In PCD you have to create the new layout in the portal layout folder (cannot remember the path). In the portal layout folder you will find all the standard layouts. Once you have created the new layout in the layout folder open the page object (in PCD), that contains the TopLevelNavigation iView and choose the new layout as the default layout.
    Hope I could help,
    Martin

  • Print in different page for different material type in Sapscript

    Hi all
    How do I do the above matter?
    Currently I have a script that print all material according to some condition.
    My client request to have a different page of material list for different material type.
    Please advise
    az

    Hi,
    1) Sort the internal table by material type.
    call func 'OPEN_FORM'.
    loop at itab.
    at new mattype.
    if mattype = 'A'.
      call fun 'START_FORM'.
       exporting
        page   =    'PAGEA'.
    elseif mattype = 'B'.
      call fun 'START_FORM'.
       exporting
        page   =    'PAGEB'.
    endat.
    call func 'WRITE_FORM'.
    AT end of mattype.
    call function 'END_FORM'.
    endat.
    endloop.
    call function 'CLOSE_FORM'.
    Thanks,
    Nethaji.

Maybe you are looking for