EventInterfaces: Send via PI instead of point-to-point

Is it true that event interfaces only support sending point-to-point (via a logical port configured in SOAMANAGER)? Or can they send via PI, too, like other web service interfaces? If so, how?

Hi Yvonne,
Your question sounds as if you want to utilize a standard mechanism of printing in SAP ME but need to set up the physical printer or print server to send the document as email instead of printing it on a paper. If so, I guess such question should be addressed to a vendor of the printer. If you use a multifunctional copy system rather than a simple printer, I would believe it might be configured in such way.
If you want to change a printing process of SAP ME so that the output is an email instead of a document sent to a physical printer, then you really need a customization. The problem is that the current implementation of email notifications in SAP ME allows a user to send email at triggering a message. Configurable (not hard-coded into a logic of specific features like Production Interface or SPC) messages can be fired from Real-Time Warnings, from NC Log and from Message Board. Once your process is not related to the first 2 features, only manual Create Message (of FREE_FORM messages type) from Message Board ca nbe used. If you happen to embed this manual Create Message in your process, then you can turn on the system rule to enable saving PDF files to the file system and change FREE_FORM message type to mention this location of the files and assign to specific email addressees.
If you cannot afford to use Create Message plugin in manual mode, then you can discuss with SAP ME Consulting a possibility of enhancement to implement a hookable version of Create Message functionality. This looks like a good future enhancement, in fact.
Regards,
Sergiy

Similar Messages

How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

Sending password via sms instead of email

Hello,
when a user gets a new password the user receives an email with his new password.
I want to know if it is possible to send the password via sms instead of email?
We are running on NW04 SPS19 Patch 7.
When i navigate to System Admin - System Config - UM Configuration - Notification E-Mails theres no way to use the sms channel instead.
Is ist possible to change it anywhere in the portal or do i have to do it programatically?
Thanks
Joerg Heyne

Hi,
check the below thread
Re: SMS messages
Raghu

Send picture via 3G instead of MMS

Now I have a Asha 311. In the past when sending pictures via my phone(Nokia X model) was via MMS, extra paid but was included into my subscription at the provider.
Now I see when sending a picture it uses automatically 3G connection, is this the only way to send a picture? Or is there still possibility to send via MMS?

The 3g is the data speed available its still sent via MMS
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to use logger to send any output instead of the console?

How to use logger to send any output instead of the console?

How to use logger to send any output instead of the
console?There are three commonly used logger inferfaces, the log4j, the java.util.loging and the Commons logging (which works with either.)
You create a logger object, generally one for each class. Normally a private static variable points to it and it has a name equal to the FQN of the class.
e.g.
package org.widget;
public class MyClass {
private static Logger log = Logger.getLogger("org.widget.MyClass");That's the java.uitil.Logger formula.
Then there are method on the logger to call for various kinds of output. There' are different logging levels, priorities like SEVERE or DEBUG. When running the logs are configured to ignore messages of less than a set priority.
You can also pass an Exception or Error to the logger which will log the stack trace.

"send via email" STILL not working

Hi community - I have seen this question asked several times but none of the answers given seem to apply to me.
I am working in a Pages document. I want to send this document as a Word file to someone else. I go to the Share menu, click Word under the "send via email" header, and then...nothing happens. No email app opens, no error message appears, nothing.
There are no slashes or unfamiliar characters in the file name. Both Gmail and the OS mail app are set up on my computer. What am I missing? I'm working on a brand new 13-inch MacBook Pro with a version of Pages just purchased from the app store.
And please don't recommend just exporting it as a Word doc and then emailing the file - I know I can do that already, but the point is this very important feature isn't working.
Thanks for the help - much appreciated!

You would get the beep sound if you click on the greyed down "Send via Email". You have to choose which kind of document you want to send. But then again if it worked for you in the new account it can't be that giving you a problem.
I once had a problem using Pages. It worked fine in another user account but not in my original. Deleting the plist file didn't help, maintenace didn't help. Finally I uninstalled Pages/iWork 09 using Yvan's script from here. Then I installed my MacOS system (Snow Leopard) on top of what I had. Since the Snow Leopard system you can install a system again without erazing the hard disk. You might though check that anything important to you is saved on another disk or stick. Remeber to do the updates for the system
I did the system updates and restarted the computer. Installed iWork. I have the iWork DVD. And I did the software updates too. Then Pages worked again!

IPSEC tunnel via hostname instead of IP address

Hi there,
Is it possible on an ASA 5500 device to connect an IPSEC tunnel via hostname instead of the IP address? I have a site without a static IP address that is currently connected via Easy VPN but I want to change one of the sites to a regular IPSEC site to site as one side, the one with the dynamic IP, is being changed to SonicWALL. I will have DDNS setup on the site with the SonicWALL so I want to know if I can point the ASA device to the hostname instead of the IP.
Thanks ahead of time for anybody with the knowledge to help!

Hi
Locally on the firewall you can configure the remote destination ip with a namel-list, is this what you were after?
name 46.46.2.2 site-to-site
tunnel-group site-to-site type ipsec-l2l
tunnel-group site-to-site ipsec-attributes
pre-shared-key cisco
Regards
Nouraj

Problem sending emails from other wifi points

Been away for christmas for few days.
Tried sending emails from various other wifi locations but they wouldn't send. However on coming home it went straight away, any ideas?
When using these other wifi points I could download emails andaccess the internet.
Cheers

After much research and help (on another site forum!) it turns out this is a BTYahoo! mail fault affecting many BT accounts (in the UK at least). Why they are messing accounts around I don't know.
If anyone finds they can't send via a BT account just find another server and enter their details and all will work again - as I've discovered after a day trawling the ether!

Send via email(Outlook) an SAP attached document

I have attached several external documents to a sales order.I also have an output type of this sales order that i send via Ms Outlook to the customers.Is it possible to attach to the same email the previously attached docs?All this functionality i want to execute in SAP ...
Thanks a lot .....

Microsoft Exchange is probably one of the most common corporate email servers. It gives you the ability to have aliases and multiple email domains in Exchange. Many corporations have multiple email domains yet without creating multiple mailboxes for each
user, Exchange and Outlook does not provide the ability to use aliases properly. What is the point in having the ability of multiple domains and aliases? There are only workarounds and a 3rd party solution. Yet again other people are providing solutions to
short-falls in Microsoft Products. I take it this issue has been parked into the "too difficult" Box?

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached. Now the email does not come up. Why?

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached. Now the email does not come up. Why?

It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
If that doesn't help, you may have better luck if you ask in the Pages forum:
Pages
When you repost, be sure to include full details about your versions so that people know what it is you're working with.
Regards.

Can i use WebApps to build a Google map with polygon territories instead of points (pins)?

I built a map with Google Maps Engine Pro - http://www.jmbcompanies.com/Services/Mitigation/map.
It showcases territories using a Google map polygon shape. I wrote custom KML to create it. However, with Google Maps Engine pro you cannot create custom hyperlinks. It will link a URL that you put in the data, but you cannot name it or target the parent window, so therefore it opens a new tab for each click to more details. I really want it to open the WebApp detail page for that item within the same window.
So, is there a way to use the BC integrated Google maps technology and show polygons instead of points on the map? I've used {module_webappsmap,20754,a} to place individual locations on a map, but what about territories or polygon areas?
I'm sure that I can create a WebApp to generate the KML for each placeholder. But how do I turn that into a map?
THANKS!!

You can not create a kml file in BC through webapps. Modules do not work in other file types and you do not have server code access to generate a file type of results.
You need to use the google API and do this yourself or you can just use this:
And embed it into a custom field. My Maps

I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Thanks

I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Ps thanks apple for ur ignorance

I have the same problem with another TeamLava app, Fashion Story.

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??

I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

It has always been very basic to always maintain a backup copy of your computer.
Did you fail to back up your pics?
The photo sync is one way - comptuer to ipod.
You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality.

EventInterfaces: Send via PI instead of point-to-point

Similar Messages

Maybe you are looking for