Eventlog 1030 group policy update error on Windows 2012 member server

group policy update is failing with event ID 1030
Computer policy is getting applied but User policy Failes. Other windows 2012 servers are successfully updating.
gpupdate /force
Updating policy...
Computer Policy update has completed successfully.
User Policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to retrieve new Group P
olicy settings for this user or computer. Look in the details tab for error code
and description. Windows will automatically retry this operation at the next re
fresh cycle. Computers joined to the domain must have proper name resolution and
network connectivity to a domain controller for discovery of new Group Policy o
bjects and settings. An event will be logged when Group Policy is successful.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results.

Hi,
Before going further, I assume that the user account we were using is a domain account. As a result, we can use this account to log onto other domain computers to see if its
user policy settings can be updated successfully.
Besides, for troubleshooting this issue, we can try to retrieve Gpsvc.log to check this issue.
Regarding how to enable logging in the Gpsvc.log file, the following blog can be referred to for more information.
How to enable GPO logging on windows 7 /2008 r2 ?
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
Best regards,
Frank Shen

Similar Messages

  • Intermittend DNS resolution, timeserver, group policy updates errors in client logs in Win 2012 R2 single server environement

    We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
    I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
    Errors:
    Error 1043: Timeout during name resolution request
    Error 1129: Group policy updates could not be processed due to DC not available
    Error 5719: Could not establish secure connection to DC, DC not available
    Occasionally but disappears after a while
    Error 134: As a result of a DNS resolution timeout could not reach time server
    Symptoms
    On Win 7 Clients
    Network shares added through Group Policy will not show sometimes
    Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
    When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
    nslookup during the incident returns cannot resolve error
    ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
    Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
    On Win 8.1 Clients
    Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
    drive shares but usually only for the active session. After logoff / logon the shares are gone again.
    The issue does appear to be load related since it occurs even if there are only one or two workstations active.
    Server Configuration
    Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
    Zyxel 1910-48 Port Switch
    VDSL 50Mbps Down / 20Mbps Up
    Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
    Currently only one Network card is active for problem determination reasons.
    There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
    I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
    Best Practice Analyzer Results
    DNS server scavening not enabled
    Root hint server XYZ must respond to NS queries for the root zone
    More than one forwarding server should be configured (although 3 are configured)
    NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
    I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
    set to 3 second.
    Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
    issues. Any help would be appreciated

    Hello Milos thx for your reply.. my comments below
    1. What does it "switched"? You may mean migration or new installation. We do not know...
    >> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
    removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
    2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
    >> Correct, and I am aware of that
    3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
    >> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
    Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
    4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
    >> Will post as soon as available
    5. I do not use forwarders and the system works
    >> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
    required apart from that it does work for you that way?
    6. DHCP should sit on DC (DHCP on router is disabled)
    >> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
    7. NIC settings in DC points to itself (loopback address 127.0.0.1)
    >> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
    8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
    >> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
    9. Test your system with dcdiag.
    >> See result below
    10. Share your findings.
    Regards
    Milos
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
      Home Server = GSERVER2
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\GSERVER2
          Starting test: Connectivity
             ......................... GSERVER2 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\GSERVER2
          Starting test: Advertising
             ......................... GSERVER2 passed test Advertising
          Starting test: FrsEvent
             ......................... GSERVER2 passed test FrsEvent
          Starting test: DFSREvent
             ......................... GSERVER2 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... GSERVER2 passed test SysVolCheck
          Starting test: KccEvent
             ......................... GSERVER2 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... GSERVER2 passed test
             KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... GSERVER2 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... GSERVER2 passed test NCSecDesc
          Starting test: NetLogons
             ......................... GSERVER2 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... GSERVER2 passed test
             ObjectsReplicated
          Starting test: Replications
             ......................... GSERVER2 passed test Replications
          Starting test: RidManager
             ......................... GSERVER2 passed test RidManager
          Starting test: Services
             ......................... GSERVER2 passed test Services
          Starting test: SystemLog
             ......................... GSERVER2 passed test SystemLog
          Starting test: VerifyReferences
             ......................... GSERVER2 passed test VerifyReferences  
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : GS2
          Starting test: CheckSDRefDom
             ......................... GS2 passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... GS2 passed test CrossRefValidation  
       Running enterprise tests on : GS2.intra
          Starting test: LocatorCheck
             ......................... GS2.intra passed test LocatorCheck
          Starting test: Intersite
             ......................... GS2.intra passed test Intersite
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    *** gserver2.g2.intra can't find g2: Non-existent domain
    > gserver2
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    g2.intra
            primary name server = gserver2.g2.intra
            responsible mail addr = hostmaster.g2.intra
            serial  = 443
            refresh = 900 (15 mins)
            retry   = 600 (10 mins)
            expire  = 86400 (1 day)
            default TTL = 3600 (1 hour)
    > wikipedia.org
    Server:  gserver2.g2.intra
    Address:  192.168.240.6
    Non-authoritative answer:
    wikipedia.org   MX preference = 10, mail exchanger = polonium.wikimedia.org
    wikipedia.org   MX preference = 50, mail exchanger = lead.wikimedia.org
    polonium.wikimedia.org  internet address = 208.80.154.90
    polonium.wikimedia.org  AAAA IPv6 address = 2620:0:861:3:208:80:154:90
    lead.wikimedia.org      internet address = 208.80.154.89
    lead.wikimedia.org      AAAA IPv6 address = 2620:0:861:3:208:80:154:89
    Final benchmark results, sorted by nameserver performance:
     (average cached name retrieval speed, fastest to slowest)
      192.168.240.  6 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      + Cached Name   | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
      + Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
      + DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 gserver2.g2.intra
                    Local Network Nameserver
      195.186.  4.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
      - Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
      - DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns8.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
      195.186.  1.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
      - Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
      - DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns7.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
        8.  8.  8.  8 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
      - Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
      - DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 google-public-dns-a.google.com
                     GOOGLE - Google Inc.,US
      UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
    15: 40
    192.168.240.  6 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      + Cached Name   | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
      + Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
      + DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 gserver2.g2.intra
                    Local Network Nameserver
      195.186.  1.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
      - Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
      - DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns7.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
      195.186.  4.162 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
      - Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
      - DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                         cns8.bluewin.ch
               BLUEWIN-AS Swisscom (Schweiz) AG,CH
        8.  8.  8.  8 |  Min  |  Avg  |  Max  |Std.Dev|Reliab%|
      ----------------+-------+-------+-------+-------+-------+
      - Cached Name   | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
      - Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
      - DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
      ---<-------->---+-------+-------+-------+-------+-------+
                 google-public-dns-a.google.com
                     GOOGLE - Google Inc.,US
      UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363

  • Group Policy Results wizard on Windows 8.1

    I am using the Group Policy Management console on Windows 8.1.  When I run the Group Policy Results wizard and target a computer running Windows Server 2003, I get the following error in the Details and Summary tabs: "An error occurred while generating
    report: There are no more endpoints available from the endpoint mapper".
    This only happens if I target a Server 2003 computer.  If I target Windows XP (and up) or Server 2008 (and up), it works fine.
    I tried running the wizard from a Server 2012 and a Server 2012 R2 computer and I receive the same error. If I run the wizard from other versions of Windows/GPMC, I can target those Server 2003 computers just fine.
    Also, the GPRESULT tool works from Windows 8.1 when I target a Server 2003 computer.
    Is Server 2003 no longer supported by the GP Results wizard or is something else messed up?  Web searches for that error just come up with things relating to Active Directory replication, Windows firewall, or the RPC locator service.

    > "An error occurred while generating report: There are no more endpoints
    > available from the endpoint mapper".
    Are server and client in the same network? If not: Double check ALL
    intermediate firewalls... I remember such a problem with a TMG between
    server and client, but I don't know the exact resolution - another
    member of the team reconfigured the TMG.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • ITunes update error 7 (windows error 1114) on Windows Vista Home Premium SP2

    I have been trying to update iTunes for the past month. I admit that I had not been keeping up with the updates for about a year but now that I want to update it, I am getting an error.
    Computer: hp Pavilion dv6700 Notebook PC, Intel Core2 CPU T8100 at 2.10 GHz
    OS: Windows Vista Home Premium, Service Pack 2
    iTunes update error 7 (Windows error 1114)
    error message from Windows:
    Runtime Error!
    Program: C:\Program Files\iTunes\iTunes.exe
    R6034 Application has made an attempt to load the C Runtime Library incorrectly. Please contact applications support (that is Apples iTunes) team for information.
    I am also getting C Runtime Library error message about once a day since I tried to update iTunes.
    What do I do?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Replication error on windows 2012 DC

    Hi,
    I have added Windows 2012 R2 server (cadpdc1) to windows 2003 sp2 DC  (Primary DC) and promoted it as DC. After the promote I have ran dcdiag and it shows errors.
    Each of servers have three NICs connected to different networks.
    Please help me with your expertise since I need to bring this up on monday.
    Thank you
    Kind regards
    Chamara
    here the dcdiag output of new DC
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = CADPDC1
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\CADPDC1
          Starting test: Connectivity
             Error during resolution of hostname CADPDC1.engineer.com through
             IPv6 stack.
             *** Warning: could not confirm the identity of this server in the
             directory versus the names returned by DNS servers. Hostname
             resolution error 0x2af9 "No such host is known."
             ......................... CADPDC1 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\CADPDC1
          Starting test: Advertising
             Warning: DsGetDcName returned information for
             \\cadpdc.engineer.com, when we were trying to reach CADPDC1.
             SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
             ......................... CADPDC1 failed test Advertising
          Starting test: FrsEvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems.
             ......................... CADPDC1 passed test FrsEvent
          Starting test: DFSREvent
             ......................... CADPDC1 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... CADPDC1 passed test SysVolCheck
          Starting test: KccEvent
             ......................... CADPDC1 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             [CADPDC] DsBindWithSpnEx() failed with error -2146893022,
             The target principal name is incorrect..
             Warning: CADPDC is the Schema Owner, but is not responding to DS RPC
             Bind.
             [CADPDC] LDAP bind failed with error 8341,
             A directory service error has occurred..
             Warning: CADPDC is the Schema Owner, but is not responding to LDAP
             Bind.
             Warning: CADPDC is the Domain Owner, but is not responding to DS RPC
             Bind.
             Warning: CADPDC is the Domain Owner, but is not responding to LDAP
             Bind.
             Warning: CADPDC is the PDC Owner, but is not responding to DS RPC
             Bind.
             Warning: CADPDC is the PDC Owner, but is not responding to LDAP Bind.
             Warning: CADPDC is the Rid Owner, but is not responding to DS RPC
             Bind.
             Warning: CADPDC is the Rid Owner, but is not responding to LDAP Bind.
             Warning: CADPDC is the Infrastructure Update Owner, but is not
             responding to DS RPC Bind.
             Warning: CADPDC is the Infrastructure Update Owner, but is not
             responding to LDAP Bind.
             ......................... CADPDC1 failed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... CADPDC1 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... CADPDC1 passed test NCSecDesc
          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\CADPDC1\netlogon)
             [CADPDC1] An net use or LsaPolicy operation failed with error 67,
             The network name cannot be found..
             ......................... CADPDC1 failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... CADPDC1 passed test ObjectsReplicated
          Starting test: Replications
             [Replications Check,CADPDC1] A recent replication attempt failed:
                From CADPDC to CADPDC1
                Naming Context: DC=ForestDnsZones,DC=engineer,DC=com
                The replication generated an error (-2146893022):
                The target principal name is incorrect.
                The failure occurred at 2014-06-27 17:05:59.
                The last success occurred at 2014-06-27 17:01:21.
                1 failures have occurred since the last success.
             [Replications Check,CADPDC1] A recent replication attempt failed:
                From CADPDC to CADPDC1
                Naming Context: DC=DomainDnsZones,DC=engineer,DC=com
                The replication generated an error (-2146893022):
                The target principal name is incorrect.
                The failure occurred at 2014-06-27 17:05:59.
                The last success occurred at 2014-06-27 17:01:21.
                1 failures have occurred since the last success.
             [Replications Check,CADPDC1] A recent replication attempt failed:
                From CADPDC to CADPDC1
                Naming Context: CN=Schema,CN=Configuration,DC=engineer,DC=com
                The replication generated an error (1727):
                The remote procedure call failed and did not execute.
                The failure occurred at 2014-06-27 17:05:59.
                The last success occurred at 2014-06-27 17:01:06.
                1 failures have occurred since the last success.
             [Replications Check,CADPDC1] A recent replication attempt failed:
                From CADPDC to CADPDC1
                Naming Context: CN=Configuration,DC=engineer,DC=com
                The replication generated an error (-2146893022):
                The target principal name is incorrect.
                The failure occurred at 2014-06-27 17:05:59.
                The last success occurred at 2014-06-27 17:01:07.
                1 failures have occurred since the last success.
             [Replications Check,CADPDC1] A recent replication attempt failed:
                From CADPDC to CADPDC1
                Naming Context: DC=engineer,DC=com
                The replication generated an error (-2146893022):
                The target principal name is incorrect.
                The failure occurred at 2014-06-27 17:05:59.
                The last success occurred at 2014-06-27 17:01:21.
                1 failures have occurred since the last success.
             ......................... CADPDC1 failed test Replications
          Starting test: RidManager
             ......................... CADPDC1 failed test RidManager
          Starting test: Services
             ......................... CADPDC1 passed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 06/27/2014   17:01:38
                Event String:
                The WinRM service is not listening for WS-Management requests.
             A warning event occurred.  EventID: 0x80050004
                Time Generated: 06/27/2014   17:05:03
                Event String:
                HP Ethernet 1Gb 2-port 332T Adapter: The network link is down.  Check to make sure the network cable is properly connected.
             A warning event occurred.  EventID: 0xA004001B
                Time Generated: 06/27/2014   17:05:06
                Event String: HP NC112T PCIe Gigabit Server Adapter
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:05:39
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was LDAP/cadpdc.engineer.com/[email protected]. This indicates that the target
    server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account
    used by the server. This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured
    to use the same password. If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified
    name to identify the server.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:05:39
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was ldap/cadpdc.engineer.com/[email protected]. This indicates that the target
    server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account
    used by the server. This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured
    to use the same password. If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified
    name to identify the server.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:05:41
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was cadpdc$. This indicates that the target server failed to decrypt the ticket provided
    by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account used by the server. This error can also happen
    if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured to use the same password. If the server name
    is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:05:43
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was GC/cadpdc.engineer.com/engineer.com. This indicates that the target server failed
    to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account used by the
    server. This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured to use the
    same password. If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to
    identify the server.
             A warning event occurred.  EventID: 0x000727AA
                Time Generated: 06/27/2014   17:05:43
                Event String:
                The WinRM service failed to create the following SPNs: WSMAN/CADPDC1.engineer.com; WSMAN/CADPDC1.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:05:55
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was cifs/cadpdc.engineer.com. This indicates that the target server failed to decrypt
    the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account used by the server. This
    error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured to use the same password.
    If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
             A warning event occurred.  EventID: 0x84350444
                Time Generated: 06/27/2014   17:05:58
                Event String:
                System Information Agent: Health: Post Errors were detected.  One or more Power-On-Self-Test errors were detected during server startup.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:05:59
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was E3514235-4B06-11D1-AB04-00C04FC2DCD2/5122bd13-c8ac-4265-a879-3a6831224994/[email protected].
    This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN
    is only registered on the account used by the server. This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server
    and the KDC are both configured to use the same password. If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two
    domains, or use the fully-qualified name to identify the server.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:05:59
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was ldap/cadpdc.engineer.com. This indicates that the target server failed to decrypt
    the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account used by the server. This
    error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured to use the same password.
    If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
             An error event occurred.  EventID: 0x0000410B
                Time Generated: 06/27/2014   17:05:59
                Event String:
                The request for a new account-identifier pool failed. The operation will be retried until the request succeeds. The error is
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:06:07
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was LDAP/cadpdc.engineer.com. This indicates that the target server failed to decrypt
    the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered on the account used by the server. This
    error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are both configured to use the same password.
    If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
             An error event occurred.  EventID: 0x0000041F
                Time Generated: 06/27/2014   17:06:30
                Event String:
                The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
             An error event occurred.  EventID: 0x0000041D
                Time Generated: 06/27/2014   17:07:07
                Event String:
                The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
             An error event occurred.  EventID: 0x0000041F
                Time Generated: 06/27/2014   17:11:32
                Event String:
                The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
             An error event occurred.  EventID: 0x0000041F
                Time Generated: 06/27/2014   17:16:33
                Event String:
                The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
             An error event occurred.  EventID: 0x40000004
                Time Generated: 06/27/2014   17:16:38
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cadpdc1$. The target name used was LDAP/5122bd13-c8ac-4265-a879-3a6831224994._msdcs.engineer.com. This indicates that
    the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Ensure that the target SPN is only registered
    on the account used by the server. This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service. Ensure that the service on the server and the KDC are
    both configured to use the same password. If the server name is not fully qualified, and the target domain (ENGINEER.COM) is different from the client domain (ENGINEER.COM), check if there are identically named server accounts in these two domains, or use
    the fully-qualified name to identify the server.
             An error event occurred.  EventID: 0x0000041F
                Time Generated: 06/27/2014   17:21:35
                Event String:
                The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
             ......................... CADPDC1 failed test SystemLog
          Starting test: VerifyReferences
             ......................... CADPDC1 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : engineer
          Starting test: CheckSDRefDom
             ......................... engineer passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... engineer passed test CrossRefValidation
       Running enterprise tests on : engineer.com
          Starting test: LocatorCheck
             ......................... engineer.com passed test LocatorCheck
          Starting test: Intersite
             ......................... engineer.com passed test Intersite

    Hi,
    Please check the following : 
    - Confgigure IPv6 in DNS Management
    - Kerberos and LDAP records of dns.
    - Zone transfer from old server to new server.
    Thanks.
    Alper YAZGAN *

  • Installing SharePoint 2013 in a Windows 2012 R2 Server I was getting the following error

    when I install prerequisiteinstaller.exe in sharepoint 2013, got the below error:
    Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
    Any expert please help?

    Hi,
    From your description, I know you get error when you install SharePoint 2013 in Windows Server 2012 R2.
    If you have tried all method above. In your case, you have installed the Web Server(IIS), but the
    Web Server (IIS) role installation may fail. You could try run commande: aspnet_regii -enable –i.
    Here are similar issues:
    https://social.technet.microsoft.com/Forums/office/en-US/37cc20db-6cc7-45e0-928c-9a1ddbdab2ae/the-tool-was-unable-to-install-application-server-role-web-server-iis-role?forum=sharepointadmin.
    http://itrob.be/sharepoint-2013-installation-issue-the-tool-was-unable-to-install-application-server-role-web-server-iis-role/
    As SharePoint 2013 does not support Windows 2012 R2 Server very well what you can find from this blog:
    http://blogs.technet.com/b/wbaer/archive/2013/09/22/sharepoint-2013-support-for-windows-server-2012-r2.aspx.
    Please try to refer to this article:https://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/.
    Best Regards
    Vincent Han
    TechNet Community Support

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • Problem installing Crystal Reports 2013 on a Windows 2012 R2 server

    Sheesh.  One of my users needs crystal reports and still uses it weekly.  It's time to update off of an old 2003 server so I setup a new Windows 2012 R2 server so that she and others can RDP into it and use the application and reports (it's a payroll thing so they want limited access).
    So - totally plain vanilla Windows 2012 R2 install.  Then make sure I have all the .net stuff installed in the windows features.
    But, whenever I run the setup.exe from the downloaded ZIP file from the sap store I get:
    (1) "Assertion failure: A fatal error has occured which has caused the installer to quit.  Please gather any %TEMP% and installer logs to present to your support personnel."
    (2) Then followed by the message:
    Microsoft Visual C++ Runtime Library -- Runtime Error!  Programs: C:\install\CrystalReports\setup.engine\SetupEngine.exe  This application has requested the Runtime to terminate in an unusual way.  Please contact the application's support team for more information.
    (3) Then:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: SetupEngine.exe
      Application Version: 60.0.0.62
      Application Timestamp: 543416b3
      Fault Module Name: SetupEngine.exe
      Fault Module Version: 60.0.0.62
      Fault Module Timestamp: 543416b3
      Exception Code: 40000015
      Exception Offset: 00131ee9
      OS Version: 6.3.9600.2.0.0.272.7
      Locale ID: 1033
      Additional Information 1: ee59
      Additional Information 2: ee59ff165b01a7b873dafe8afa2598dc
      Additional Information 3: f1a8
      Additional Information 4: f1a876ca1cb1cf9f6541ac072dd70f88
    I can't find any information on this!  I have found a similar message that refers to a 2011 install that was fixed with a SP9?  But this machine has no current install.  I did buy the full version two days ago online from the sap store.

    There is an older C++ library that you need that is not available by default on Win 2012.  You can get the install for this here:
    Download Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC Security Update from Official Microsoft Do…
    Also, be sure you're logged in with Administrator rights, the right-click and "Run as Administrator" when you run setup.  You might also have to turn off the Windows Firewall when you run the install (you can turn it back on again after the install is complete.)
    -Dell
    Message was edited by: Dell Stinnett-Christy

  • Running a .cmd file at startup using Task Scheduler on Windows 2012 R2 server

    Hello,
    I've recently tried to get a simple .cmd file running at server startup on my Windows 2012 R2 server.
    The .cmd (test.cmd) file contains the following:
    C:
    cd C:\SomeFolder\
    call Some.exe file "Argument1" "Argument2"
    I've ensured that the local administrator user [someuser01] has full control of the C:\SomeFolder
    I've also ensured that someuser01 is part of Log on as Batch Job
    in Local Security Policy
    To try running it as startup, I tried using Task Scheduler.
    General Tab: I set the user (local administrator account [someuser01] ) and ticked the options
    Run whether logged on or not, Do not Store Password, Run with Highest Privileges
    Triggers: At System Startup, Ticked Enabled
    Actions: Start a Program. Program/Script: test.cmd, Add arguments: [Blank], Start in: C:\SomeFolder
    Conditions: Unticked all conditions
    Settings: Ticked only the following --> Allow task to be run on demand, If the running task does not end...force to stop
    Then I clicked OK and was prompted for someuser01's credentials.
    I then restarted the server.
    Upon logging in as administrator, I checked the task scheduler, and I found that the task did not run (Last Run Time: Never)
    I've been able to run it manually (click Run on the task in Task scheduler) without any problems.
    I just cannot get it to run at startup as I've instructed Task Scheduler to do.
    Any ideas on what might be causing this problem?
    Thanks.

    Hello Dave Patrick,
    I've also tried this approach and I came across this error after I try to enter someuser01's credentials:
    An error has occured for the task sometask01. Error message: The following error was reported: A specified logon session does not exist. It may already have been terminated..
    After doing some research, this new error is caused by a setting in Local Security:
    Local Security Policy --> Security Options --> Network Access: Do not allow storage of passwords and credentials for network authentication --> Enabled
    Unfortunately, I cannot disable this Security Policy due to our company's internal restrictions.
    Just to clarify, the reason that the task does not run at startup is because of a logon failure because the password was not stored for
    someuser01 ?
    However, I cannot allow storage of the password because of our our company's internal restrictions.
    Is there a possible workaround for this..?
    Thanks!

  • Sharepoint 2013 installation in windows 2012 R2 server

    Hi,
    I am unable to install Sharepoint 2013 server on Windows 2012 R2 Server.
    I am getting below error
    The tool was unable to install Application Server Role, Web Server (IIS) Role.
    I checked my IIS it is working fine.
    Please help me out.
    Regards,
    Siva.

    Make sure you have the SharePoint 2013 with Service Pack 1 ISO. Pre-SP1 will not install to SP 2013, and you cannot slipstream it yourself.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Can Crystal Server 2011 run on a Windows 2012, R2 server?

    Hey,
    I purchased Crystal Server 2011 in April 2013.  Unfortunately, due to a heavy workload I'm just now ready to install it in a test environment.  Will Crystal Server 2011 run on a Windows 2012, R2 server?

    If you update your CR Server to SP 5, then yest, it is supported on WIN 2012.
    See the PAM.
    To get SP5 you will have to loin to the SAP Market Service Place.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada

  • Unable to generate Pdf report for crystal 9/10  in Windows 2012 (Standard) server with Times New Roman font. With same font, report getting generated in excel, text, csv format in Windows 2012.

    For Times New Roman font in Windows server 2012 R2 (Standard), crystal 9/10 report in pdf format is not getting generated. When we change the font for specific report like Arial, Calibri , Cambria then pdf report getting created.
    In Windows 2008 R2, same application worked fine to generate pdf report for TimesNewRoman font and there is no change done in the application which is being used in Windows 2012 R2 server.

    Ok, thanks for the reply. You need to contact support or a forum for the Crystal software. Third party products don't usually include Adobe technology, they have their own software. When you contact them, you may want to expand "unable to generate" to give any specific symptoms including any error messages.

  • Windows Server 2012 Member Server Time Sync Issue.

    We are running in a situation where our Windows Server 2012 member Server not syncing the time from Domain Controller
    Time Source is pointing to Local CMOS Clock.
    Trying to Sync forcefully it getting the error as the computer did not resync because no time data available.
    Performed unregistered the time service and registered the service same issue.
    Kindly assist

    Hello,
    This seems not related to SQL Server but more related to IIS.
    Try setting the trust level to full using the following article:
    http://www.iis.net/learn/application-frameworks/scenario-build-an-aspnet-website-on-iis/configuring-step-4-configure-application-security#42
    If the above does not solve the issue, please post your question on the following forum:
    http://forums.iis.net/
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • WINDOWS 2012 STORAGE SERVER R2

    I am a Microsoft Partner that is in search of Windows Storage Server R2. I have multiple buyers for the product already and would like to fill orders of this product. I have been having difficulty finding distribution for the product from Synnex, ASI Corp,
    MA Labs, Tech Data etc.
    Firstly,  Where can I purchase Windows 2012 Storage Server R2?
    Secondly, How can I become an authorized reseller of this product? 
    Any assistance would be appreciated.  Please email me at:
    [email protected] .  Thank you

    I am a Microsoft Partner that is in search of Windows Storage Server R2. I have multiple buyers for the product already and would like to fill orders of this product. I have been having difficulty finding distribution for the product from Synnex, ASI Corp,
    MA Labs, Tech Data etc.
    Firstly,  Where can I purchase Windows 2012 Storage Server R2?
    Secondly, How can I become an authorized reseller of this product? 
    Any assistance would be appreciated.  Please email me at:
    [email protected] .  Thank you
    I would not do it... I mean hunting for Storage Server is pointless. For a reason: built-in restrictions make it unusable for anything else except storage management (what it was initially designed for).
    (there are other important restrictions like being not able to be an Active Directory controller but they are irrelevant in the context of this topic)
    Running more then 2 VMs is not supported. Having full-blown x64 server doing only storage and spending 1% of CPU time for that is... a bit questionable investment. System would be insanely resource over provisioned. Very bad ROI. See: 
    Storage Server Overview
    http://technet.microsoft.com/en-us/library/jj643303.aspx
    Product description
    A computer that runs Windows Storage Server is referred to as a storage appliance. Windows Storage Server is based on the Windows Server operating system,
    and it is specifically optimized for use with network-attached storage devices. Windows Storage Server offers you a platform to build storage appliances that are customized for your hardware.
    Role/Feature
    Windows Storage Server 2012 R2 Workgroup 
    Windows Storage Server 2012 Workgroup
    Windows Storage Server 2012 R2 Standard 
    Windows Storage Server 2012 Standard
    Virtualization (Hyper-V® host or guest support)
    No
    Yes, 2 VMS
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • Windows 2012 storage server and tier with external SSD disks

    Hi
    My query is in case I have one SAN storage with SSD and FC disks connected to Windows 2012 storage server, will Windows be able to manage Tier between two types of disks if the volumes are properly assigned and formated?
    Regards

    Hi
    My query is in case I have one SAN storage with SSD and FC disks connected to Windows 2012 storage server, will Windows be able to manage Tier between two types of disks if the volumes are properly assigned and formated?
    Regards
    Short answer: No, not automatically. Long answer: Yes, it can be done but with some tricks. First you'll have to make your SAN export LUs built from flash and from spindles. At least one of each (see URL below). Then you'll have to build storage spaces (even
    clustered but that's not officially supported for non-SAS disks) from them.
    See:
    Configure Tiering with Windows Server 2012 R2
    http://blogs.technet.com/b/askpfeplat/archive/2013/10/21/storage-spaces-how-to-configure-storage-tiers-with-windows-server-2012-r2.aspx
    Both LUs would have non-SSD type reported so you'll have manually assign types with PowerShell what's flash and what's spindle.
    "Notice that the SSD devices were detected as SSD media.  However, in this case the physical drives show as unknown.  
    If yours are not detected like in this example, they should be set correctly which can be done using PowerShell. "
    Hope this helped :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Maybe you are looking for

  • HP deskjet 3050A scan utility won't open with Mac OS 10.8.2

    I downloaded the new software for the HP deskjet printer. Set it up to print wirelessly, which works fine. But the HPScan utility (I seem to have one that says HP Scan and one that says HPScan 3) neither utility can be opened. Message says "check wit

  • Sad ipod and not seen in windows and iTunes

    I tried to play my ipod mini yesterday and it displayed and exclamation point and a folder. Then I went to the support page and tried the 5 r's. When I reset my ipod teh screens change from the sad face to the folder. I tried to restore, but my ipod

  • F1 Help in ALV

    Hi friends, how to provide F1 help for fields in alv grid

  • TreeByNesting image changes required for Expand,Collapse and Leaf Icons

    Hi I am currently working on webdynpro for Java on NW04s SP15. I have embedded Tree Element inside Table. I need to change the Expand,Collapse and Leaf Arrows inside Table. I dont find those things inside Theme Editor. Could you please suggest how ca

  • About Runtime Environment

    already we know that how can execute one java program from within another java program . but my doubt how to get inputs to one java program from within another java program?i dont need command line arguments