Events and Projects not opening after Restoring from broken Hard drive.

Hi all!
I have a major problem. After almost 3 months editing 6 projects within the same library the hard drive died. These projects are for a very important client and are worth a lot of time and money. We always backup all the raw material on 3 hard drives so we do have all the raw material, however FCPX for some reason had stopped making backups of the projects after it was updated to 10.1.2. (The loss of these projects could mean the downfall of my production company.) We had a professional data recovery company recover all the data to a new hard drive without any problem, we can see the libraries and open them, HOWEVER the events and projects within the libraries DO NOT OPEN OR SHOW UP.
I have entered into the library in the finder and everything seems to be there, all the events files show up. But FCPX wont recognize them.
Any help would be much appreciated,
Thanks, Tom
You can see here that everything is inside the library folder.
But they don't show up in FCPX.
P.S
Also this file is showing up only after the data was restored.

The journal files are something that've been generated by the data recovery. It's completely hosed the data base.
I don't know if this will work. Try carefully removing all the journal files. Put them somewhere else in folders with the location where they came from. Also move out the currentversion.flexolibrary file. Hopefully without the flexolibrary file the application will generate a new one. Then launch the application.
WHy did you continue to operate when there were no backups, without even a hard drive backup?
Wwhat version of the software are you using? 10.1.2?

Similar Messages

File not found after importing from external hard drive

I have been importing music from an external hard drive into my Itunes account. Some of the songs transfer fine, but some of them show up in Itunes as being imported, but when I go to listen to them I get a file not found message because the original file cannot be found. If I have the hard drive plugged in there is no problem, but without it I get that message.
Any advice? I"d really like to get all music set up in Itunes.

Search Amazon - Davie Pogue I believe has released the missing manual for Leopard - it is a good general reference Liz Castro did a great book on iPhoto 05 but has not done one for '08 as of now
The iPhoto Help section is very helpful
Reading this forum will teach you a lot about iPhoto
If you have not taken the iPhoto tutorials yet you should - http://www.apple.com/support/iphoto/
Make mistakes and fix them - that's the way I do it
LN

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

Leonie,
Fisrt let me thank you for your reply and assistance! So here is the problem with so more detail...I was not sure I was going to get any replies ; )
I restored from a time machine back up.
History of Failure:
I was trying to launch Aperture when the kernal panic occured. My computer had been closed, and asleep and the battery was dead. I plugged in charger and it was restoring/waking up after being asleep/shutting down from dead battery. I launched Aperture from the dock and as soon as it opened the kernal panic occured. After that the computer would not turn on. It would try to boot then it would shut off. I even tried to safe boot to no avail. I went to the Apple store and they told me that the only thing I could do was restore whole computer from back up. So thats what I did.
Since then my previous aperture library: "2011" will not open. I have created a new aperture library "2012", and it runs fine. I have added new photos for about the past month...no problems.
When I launch aperture with 2012 library then try to switch libraries, I get the following prompt: "The selected library is from an older version of Aperture and requires a relaunch to switch." I choose "Relaunch" and I get the following warning prompt: "There was an error opening the database for the library “~/Pictures/Aperture Library 20111.aplibrary”." The only option is "Quit"
Both libraries are version 3.2.3
Computer stats: 3.06 GHz Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, OS X 10.6.8
I have tried to launch aperture troubleshooting by holding option+command from both the aperture icon and from the library file, neither will launch the troubleshooting feature.
I am ok with computers, but not a whiz (mechanical engineer)...to me it seems as though there is a corrupt path or file or some sort of "check" that is failing, becuase the failure occurs so fast after trying to launch aperture. Maybe that doesn't make any sense but just a thought.
I hope that you may be able to provide some insight. Thank you again for you time and I hope that you have a nice day!
Mike

Super drive is not working after Restoring from Time Machine

well its pretty much the Subject actually, my imac giving me BlueScreen problem so i searched and posted question and the only Solution i got was to Re-install Leopard and i did that by using Leopard DVD and Restored my imac from Time Machine backup, But i got into new problem and now the TIME after restoring from the "Time Machine" my DVD ejecting EVERY CD,DVD etc. even the Leopard DVD which he reads happily.
I dont think its a hardware fault at all, but i'm not a "Genious". Any suggestion!

Issue solved with visit to Genius Bar.
As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
Hope this helps someone else.

Aperture crashed and will not open after last update. Anyone else have this problem?

Aperture crashed and will not open after last update. Anyone else have this problem?

Yes. See this very forum for 50 threads on it, that explain the solution.

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

How to full restore from external hard drive backup

I'm a new MAC user and got myself in a mess where i need to perform full backup restore from external hard drive. Last back via time machine to external drive was 2 days ago, so the data is there.
What are the MAC boot commands to get me to system restore options. And there any useful tips you can pass on.

http://www.macworld.com/article/1165784/how_to_restore_data_from_time_machine.ht ml

I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what?

I have stored everything on my Macbook pro in a external hard drive (Time Machine) Now that we have "wiped the machine" I am told I can start it over and load ontent--apps, docs, etc from the hard drive, just plug it in, find the time machine and what? I need to know what to highligh, what to click on.

hirogliffix,
take a look at this Apple page — in particular, the “Restoring data from Time Machine backups” section and its “Restoring your entire system from a backup” subsection.

My laptop is making a clicking noise and I think it's coming from the hard drive. Is this normal?

My laptop is making a clicking noise and I think it's coming from the hard drive. I uploaded audio of the clicking to: http://dl.dropbox.com/u/15528211/Memo.m4a. Is this a normal sound or an indication of a problem? Thanks in adance.
Info:
HP Pavilion G6-1b70us - Purchased 2 days ago from Office Max

That is a hard drive clicking. It sounds kind of intermittent like it might be just the hard drive safety system parking the read head on the drive. Do you get a sustained click when you try to boot up? Have you tried the hard drive health test in the BIOS? Just tap F10 as you power up and go into the setup/bios and look for the hard drive self-test and run the long form version and see what you get.
Here is the Service Manual, which is always a good thing to have:
http://h10032.www1.hp.com/ctg/Manual/c02829479.pdf

Events and project thumbnails missing after moving to new computer

I just helped a friend to move to a new Mac. I have copied all her personal data to her new computer, so iMovie Events and Projects are present in her new Movie folder. However, after opening iMovie '08, all events and project thumbnails are missing. How could this be? Is there perhaps some library file that keeps track of all this that I need to copy as well? Is there a way to re-link iMovie with the events folder?

Try this:
First, make sure you've quit out of iMovie. Then go to your Movies Folder > iMovie Events > and then into the folder of the even that's giving you trouble. Drag the folder "iMovie Thumbnails" to your trash. Then open the folder "iMovie Cache" and drag the file "Cache.plist" to the trash. Restart iMovie. It should rebuild the thumbnails, and by regenerating the .plist file, it should have the data it needs to reed the new thumbnails into iMovie.
It worked for me. Hopefully it will work for you too.

My operating system has just vanished !! The laptop turns on but dose not go past the apple logo and I really need my files from my hard drive ASAP ??

My laptop had lost it's operating system,it turns on and the logo comes up with the spinning wheel And that's as far as it goes, I can not get into safety mode. I can not open my bios and I desperately need by collage files from the hard drive. Please help!!

Try booting in Safe Mode.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Restoring from external hard drive

I just replaced my hard drive on a MacBook Pro 13", and now I am trying to restore from an external hard drive. The drive is mounted, but when I run Migration Assistant, it does not see the disk drive for restoration. FYI: I did not initially use time capsule to create my back-up that I am currently trying to restore. What do I do at this point? The help is greatly appreciated!

What happened to the HDD from the MBP? Is it damaged or unusable?
Last December, my Feb'08 MBP had a catastrophic logic board failure. The HDD survived intact, hardware-wise, with minor damage that Disk Utility was able to repair after putting it in an external Firewire800 enclosure. After purchasing an Oct'11 MBP, at first start uset the Setup Assistant to migrate the entire contents of the old Mac's drive onto the new. As per recommendations from this forum, Setup Assistant does a more thorough job than the Migration Assistant you run later at will.
So, if the old drive is readable, you can try this route. Just wipe out the new drive in the MBP, reinstall the desired OS and restore from the old drive when the Setup Assistant that automatically runs at first start asks if you want to restore from another computer.

How do I restore from old hard drive to a new iMac ?

The logic board in my mid 2008 iMac 24" has failed just 3 months out of AppleCare. To replace this will cost me HK$ 6500. I was going to buy a new mac anyway, just waiting for the next refresh model to come out. So a new 27" i7 with highest spec and SSD and 2TB hard drive with AppleCare will cost me HK$ 24k. No brainer to just buy a new iMac rather than spend 25% of the cost to repair a 3+ year old iMac.
The hard drive is working ok so the repair centre said they will remove the hard drive for me and suggested I buy an enclosure for it , put the old drive in the enclosure and then transfer the program's, settings and files to the new IMac.
What is the best way to do this ? I obviously cannot boot up the old drive. Can I connect this drive to the new iMac and then use setup assistant to move settings and program's to the SSD on the new iMac , then use migration assistant to move the remainder of the files ( documents folder, iPhoto etc) to the hard drive on the new iMac ?
If not then any suggestions ?

Do as the repair center suggests and place the old drive in an enclosure then connect it to the new Mac.
When you first start new Mac run Setup Assistant and tell it to restore from the external drive.
It worked for me and should work for you.
Allan

What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

Csound1 wrote:
Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
The OP said they plan to store movies on the external drive.
Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
At least with exFAT there is no fee to Redmond, at least not yet.

Trying to open Recoverd Files From Old Hard Drive

Sent my iMac 21.5" OSX 10.9.5 Maverick to have the hard drive replaced when it came back I tried using my seagate back up to recover some folders, music - photos etc.but the back up drive was blank. I then took the old hard drive to see if the workshop could recover anything from it, I gave them my back up drive to use. Subsequently I received my backup hard drive with folders they had managed to recover but it looks like they are encrypted plus case sensitive . Have tried following one or two of your tips e.g." TM and disc utility" but have had no success. Really what I am asking is can anything be done to recover these folders? James Lyon
PS this is what they look like on my back up drive!!

The Events and Projects you want to update have to be in a Final Cut Projects folder and a Final Cut Events folder at the root level of the Hard Drive on which they are stored. Then in FCP X under file menu select Update Projects and Events and navigate and select the Hard Drive where they are stored.

Events and Projects not opening after Restoring from broken Hard drive.

Similar Messages

Maybe you are looking for