Events cannot have multiple exceptions for the same date

I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
I didn't find the answer on these forums but did find it on this thread on Google:
http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
Here's the important excerpt:
"I had a client, who just had this same issue, nothing to do with Google cals.
It was apparently, in my best guess, a corruption of the subscribed cal.
*I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

Similar Messages

  • Can we have multiple policies for the same gateway?

    Hi all,
    Is there a way in which we can have multiple policies for the default gateway?
    When I try adding a new gateway (which is not mentioned in the installer.properties file) and have policies, there is a 404 error.
    When I add another service to the same gateway, I get an error - that the service could not be added to default policy.
    Help me please...
    My need is as follows
    Want to have multiple policies, so that each of the web-service can be attached to same. The relation needs to be one-to-many. One policy can have multiple web-services.
    Thanks in advance...

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Can we have multiple transports for the same object.

    Hi guys,
    Can we have multiple transports for same object in dev system. Can anyone tell me how can this be done.
    Thanks

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • How I have multiple KPIs for the same measure?

    Hi there,
    I am finishing up a PowerPivot data model which gathers information from a service desk system, and different customers have different SLA targets.
    I know I can specify a KPI for each measure that I create. However is there a way to specify multiple KPIs the same measure, or any other way/workaround that can meet the requirement outlined above?
    Thanks in advance for the help.
    Regards,
    P.

    Hi pmdci,
    According to your description, you want to specify different target for different customer when creating KPI based on same measure. Right?
    In PowerPivot, when we create a KPI, we can only specify calculated field or absolute value as target. We can't put any expression or function to specify a dynamic value as target value. Based on my knowledge, this requirement can be achieved in Reporting
    Services. We just  need to create a Variable and use Switch() function in expression to set specific values for different users. In this scenario, it seems can't be achieved in PowerPivot currently. I suggest you post this thread on PowerPivot forum:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlkjpowerpivotforexcel
    You may get some more effective advice there.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • When importing my address book from Outlook why do I have multiple entries for the same contact?

    I have an address book and it contains one list in Outlook. I just downloaded Thunderbird and imported my address book. The address book and one list imported very easily but there are anywhere from 3-5 entries for each person in my contacts. If I delete the extras they are removed from my list as well. Why are there multiple listings for each contact and how can I remove the duplicates without losing my list entries?

    as I was looking thru pictures in my finder I noticed there were several copies of the same pictures I had taken yesterday. I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved  them to trash, then I thought I'd look it up when I realized its not just these pics, but very many had een stored in groups of three or four.
    1. Why is that?
    Depends on where you saw them - If they were in the iPhoto library iPHoto has either two or three different versions (no duplicates) or each photos in its library - this is not optional and can not be changed  --  If they were not in the iPhoto library then you can do what you please with them and they have nothing to do with iPhoto - iPhoto is only involved with the photos in its library
    2. Why is it advised to NEVER make changes to the structure or contents of iPhoto in Finder?
    (as quoted Below)
    "I would suggest using one of the proven safe programs - if you are going to manually remove them be sure to remember that you NEVER make any chnages to the structure or contents of the iPhoto library using the finder - only make changes using iPhoto"
    Very simple - if you do you will destroy your iPhoto library and have to start over losing all work you have done in iPhoto - The iPHoto library is a SQLite database and there are NO user servicable parts in the iPhoto library and any changes made using teh finder will corrupt the database and cause dataloss
    Is that a good enopugh reason for you?
    So if these photos were in the iPhoto library when you
    I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved  them to trash,
    You destroyed your iPhoto library and will either have to restore your backup from before you did this. put everything back EXACTLY like it was before or start over
    LN

  • Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

    Hi,
    Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
    I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
    Below are the 2 records the data from the table
    select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
    DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
    12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
    PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
    122:17056     122     17056     802     801
    15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A     
    122:17056     122     17056     802     801
    Thanks in advance,
    -vijay

    It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
    Case -1 : When you delete the existing model and re-import again.
    case 2:
    When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
    You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
    -Murali
    Edited by: 907569 on Jan 8, 2013 10:55 AM

  • Multiple Partners for the same customer in Message tracking of SEEBURGER

    Hi,
    This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
    12345_INVOIC02
    34567_INVOIC02
    45678_INVOIC02

    Hi Satya,
    you can define for a vendor/customer several partner functions with different        
    adresses. You can create certain partner roles several times.               
    If you create a purchase order, than you can choose the wanted              
    address and partnerrole on the header level. In the standard system you     
    can use the patner role 'OA' ordering address and for the finance           
    the 'IP' Invoice presented by.
    I hope I was able to help you.
    Kind regards,
    Zsuzsanna

  • I have multiple devices with the same cerificate, once I have a an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.

    I have multiple devices with the same cerificate, once I have an exception for one, FF denys access to the others. I cannot change the certificates, I need to stop FF blocking them.
    == This happened ==
    Every time Firefox opened
    == I attempt to access a web front end on an IBM SVC device

    You can't use the same certificate more than once.
    See also [[Certificate contains the same serial number as another certificate]]

  • Multiple HighlightPainters for the same JEditorPane

    Hey Everyone,
    I'm having a problem having highligts of multiple colors for the same text component.
    Basically I have a set of results in a separate panel for a search on the text in a JEditorPane. I want the text corresponding to all the search results to be highlighted one color as soon as the search is done, and when one specific search result is clicked on, have the highlight for that result's text change to a different color.
    My current implementation is trying to do this by setting highlights for all the search results, and then when a result is clicked on, setting another highlight with another highlight painter of a different color. Unfortunately, this causes only the second higlight color to be displayed, even though when I look at the editorpane's highlights i can see all of them are being stored.
    Is there something I'm misunderstanding about Highlights?
    Thanks for any help,
    Phil.

    This example shows some ways of playing with attributes and highlights:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.text.*;
    public class TextPaneAttributes extends JFrame
         JTextPane textPane;
         JScrollPane scrollPane;
         Highlighter.HighlightPainter cyanPainter;
         Highlighter.HighlightPainter redPainter;
         public TextPaneAttributes()
              textPane = new JTextPane();
              textPane.setMargin( new Insets(20, 20, 20, 20) );
              StyledDocument doc = textPane.getStyledDocument();
              DefaultHighlighter highlighter = (DefaultHighlighter)textPane.getHighlighter();
              cyanPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.cyan );
              redPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.red );
              //  Set alignment to be centered for all paragraphs
              MutableAttributeSet standard = new SimpleAttributeSet();
              StyleConstants.setAlignment(standard, StyleConstants.ALIGN_CENTER);
              doc.setParagraphAttributes(0, 0, standard, true);
              //  Define a keyword attribute
              MutableAttributeSet keyWord = new SimpleAttributeSet();
              StyleConstants.setForeground(keyWord, Color.red);
              StyleConstants.setFontSize(keyWord, 24);
              StyleConstants.setStrikeThrough(keyWord, true);
              //  Define superscript attribute
              MutableAttributeSet superscript = new SimpleAttributeSet();
              StyleConstants.setSuperscript(superscript, true);
              //  Add initial text
              textPane.setText( "one\ntwo\nthree \nfour\nfive\nsix\nseven\neight\n" );
              //  Change attributes on some keywords
              doc.setCharacterAttributes(0, 3, keyWord, false);
              doc.setCharacterAttributes(20, 4, keyWord, false);
              //  Highlight some text
              try
                   textPane.getHighlighter().addHighlight( 4, 7, cyanPainter );
                   textPane.getHighlighter().addHighlight( 25, 28, cyanPainter );
                   textPane.getHighlighter().addHighlight( 35, 40, cyanPainter );
                   textPane.getHighlighter().addHighlight( 15, 20, redPainter );
              catch(BadLocationException ble) {}
              //  Add some text
              try
                   doc.insertString(0, "Start of text\n", null );
                   doc.insertString(doc.getLength(), "End of text\n", keyWord );
                   doc.insertString(doc.getLength(), "2", null );
                   doc.insertString(doc.getLength(), "1", superscript );
              catch(Exception e) {}
              //  Add text pane to frame
              scrollPane = new JScrollPane( textPane );
              scrollPane.setPreferredSize( new Dimension( 200, 200 ) );
    //          scrollPane.setComponentOrientation(ComponentOrientation.RIGHT_TO_LEFT);
              getContentPane().add( scrollPane );
              //  Create a Button panel
              JPanel buttons = new JPanel();
              getContentPane().add(buttons, BorderLayout.SOUTH);
              //  Add a Bold button
              JButton bold = new JButton( new StyledEditorKit.BoldAction() );
              buttons.add( bold );
              //  Add Right Alignment button
              JButton right = new JButton( new StyledEditorKit.AlignmentAction("Align Right", StyleConstants.ALIGN_RIGHT) );
              buttons.add( right );
              //  Add Remove Highlight button
              JButton remove = new JButton("Remove Highlight");
              buttons.add( remove );
              remove.addActionListener( new ActionListener()
                   public void actionPerformed(ActionEvent e)
                        int offset = textPane.getSelectionStart();
                        Highlighter.Highlight[] highlights = textPane.getHighlighter().getHighlights();
                        for (int i = 0; i < highlights.length; i++)
                             Highlighter.Highlight h = highlights;
                             DefaultHighlighter.DefaultHighlightPainter thePainter =
                                  (DefaultHighlighter.DefaultHighlightPainter)h.getPainter();
                             if (offset >= h.getStartOffset()
                             && offset <= h.getEndOffset())
                                  textPane.getHighlighter().removeHighlight(h);
         public static void main(String[] args)
              TextPaneAttributes frame = new TextPaneAttributes();
              frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
              frame.pack();
              frame.setVisible(true);

  • WDS 2012 R2 - Cannot PXE multiple clients at the same time

    Hello All,
    This is my first post on here so I apologize if this is the wrong place.  I work for a school district and we are implementing WDS 2012 R2.  We've been extremely satisfied with the speeds and ease of use through unattend files.  However, for
    the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
    So here's the problem:
    I have a stand alone WDS server which is not a domain controller and is not our DHCP server.  I have IP helpers and broadcast forwarders setup on the network.  As well as option 66 and 67 in DHCP.  So far so good right!
    Well that's partially right.  When we boot one client at a time to the WDS server.  Everything works as intended.  We can TFTP the necessary files from the WDS server.  Everything boots up and we're off and running.
    However, if we boot up two or more clients at the same time.  The WDS server never responds to the traffic.  The clients get their DHCP information.  They start the referral and download from the WDS server, but get no response.  I'm
    really hoping that someone on here would have some insight of something I can try.  I've about exhausted my list of peers and contacts.  They're all stumped as well and were smart enough to stay with 2008 WDS.
    I would prefer to stick with 2012 R2 since it's setup and working for the most part.  With only this one hiccup.
    Thanks in advance for any guidance!

    Hello Daniel,
    I appreciate the reply and apologize for taking so long to get back to this.   Things have been a little hectic over here.
    I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
    Multicast is enabled on the server, and it works for the clients.  However, as stated in the original post.  I cannot boot multiple machines at the same time.  I can start them from the image selection screen around the same time though.  So,
    that appears to be working fine.

  • HT1311 can you see which device bought something on iTunes where you have multiple devices on the same iTunes account?

    is there any way to find out which device dowloaded apps when you have multiple devices using the same itunes account? 

    The purchase information does not include the device used, but does include the Apple ID used for the purchase.
    Apps downloaded on one device with the same Apple ID can be downloaded on another device with that Apple ID.

  • How do I have multiple accounts on the same computer

    how do I have multiple accounts on the same computer? The idea of ", hold down the option (on a Mac)/ shift (on a PC) key each time you start iTunes" does not seem to work for me. Thanks.

    Create multiple Windows User Profile with each managing his own iTunes account and library.
    To create a user account on Windows 7:
    To open User Accounts, click the Start button , click Control Panel, under 'User Accounts and Family Safety', select Add or Remove User Accounts.
    Click Create a new account.
    Type the name you want to give the user account, click an account type(make sure to give Administrator), and then click Create Account.

  • Can you have multiple databases on the same LUN in Exchange 2010?

    I'm sure you can but is it possible with exchange 2010 to have multiple databases on the same LUN.  We currently have 8 DB's all writing to their own DB drive and separate log drive so 16 drives in total.  I need to spin a new DB up this week and
    wanted to double check this is possible.  I've looked online and cant find anything that I've seen before that says this is possible.
    Thanks.

    Hi,
    Yes, multiple databases could be placed on the same LUN, but it's not recommended.
    If you have 2 drives fail at the same time (it happens more than you think), then losing 100% of your DBs is a lot worse than losing one of them or some of them depending on where the failures are.
    Here is a similar thread for your reference:
    Multiple databases on the same LUN in Exchange 2010
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • TS2972 I have multiple libraries on the "same computer" with two different desktops, can't I share between two libraries on the same computer?

    I'm trying to use home sharing to share content between libraries so some of the combined content in a given library, can be synced to an ipad.   Instad of having mulitple computers, i have multiple libraries on the same computer using two desktops.  How do I share within the same computer?

    iTunes must be running for home sharing to work.  There is no way to have home sharing running simultaniously for two users on the same computer.
    Simply add the media files using File > Add File/Folder option in iTunes.

  • ITunes 11... I have multiple artists with the same album name... how do i have them show up as separate albums?

    I have itunes 11 with iTunes Match on 2 Macs and 2 ios devices... I know it all has bugs... but I have been ok.
    I am wondering how to show my library in the column browser view when I have multiple albums with the same names? I have noticed on my ipod in my car that an album titled "Christmas" plays and includes 2 different albums titled christmas... and in itunes it lists them both when not in the artwork view... (I primarily use the column browser to navigate my library.
    Just wondering if anyone else has experienced this/knows how to fix.
    Thanks!

    Various workarounds I can think of which basically involve playing around with tags.  See which meets your needs or come up with others:
    Give the albums slightly different names.  For example, "Greatest Hits" [ABBA]"
    Do the same but do it in the sort album field.
    Add a bogus disc number to different albums.  It may string them together still but at least they will be slightly grouped.

Maybe you are looking for