Events in iCal doubled after use of iSync and Nokia 6300

Hi,
I’ve got a problem with the sync though iSync of the Nokia 6300 and iCal on my Mac – a problem which might be related to the imported phoneplugin – but I really don’t think so, as other users doesn't seem to have any problems with this phoneplugin:
http://nokia6300.net/3/isync-and-nokia-6300
The story goes like this:
During sync with iSync somehow over 505 of the events are doubled in both iCal on my PowerBook G4 with OS X 10.4. AND in the calender of Nokia 6300. If I sync three times an event is tripled in both iCal and phone etc. It seems like iCal doen’t want to obey the phone during sync – and I always use the phone as my primary source – as far as I know, anyway. iCal is thus used as a backup.
And there is another curious thing going on:
I’ve created my own calender in iCal. Even though I subscribe to Holidays and Weeknumbers in iCal, they are turn of during sync with iSync. But still they emerge in the calender of my Nokia 6300 after sync. As far as I can see, the setup is correct.
If anyone knows how to deal with these issues, I’d be must greatful, as deleting all these extra events in the phone and iCal after each sync is both rather irritating and terrible time consuming.
PowerBook G4 1.25 GHz Mac OS X (10.4.9) 2 GB RAM

OK, I've found the answer. I've used the plugin found here (in my case the one for iSync 2.4):
http://www.s60themes.co.uk/
- and it works wonderful. Nokia 6300, iSync and iCal now plays together like a sweet dream!
PowerBook G4 1.25 GHz Mac OS X (10.4.7) 2 GB RAM

Similar Messages

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Lose airport connection after using boot camp and windows XP

After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

Dynadock U3.0 - after use - "Blue Screen" and System Restore required

Hello,
Everytime after I used my new Dynadock U3.0 and I shut down the computer, a system restore is required when I use the computer again.
I use a Samsung 900X4B. Could it be the Notebook or is something wrong with the Dynadock?
What could be the problem? (I use the latest drivers)
Thank you for helping.

Thank you.
I tried to disconnect the Dynadock using the icon on the right side.
I installed the newest driver, including the displaylink softwarev 6.3.
I also dissabled the virus scanner.
However, evertime I restart the notebook the system needs to be repaired or restored.
I did not matter, if I left the USB-link attached or detached it after using the icon on the right side to shut down the dynadock.
I tried all possible modulations.
Another dockingstation (USB2.0) is working fine. I also can remove or attach during work without problems.
May be I miss something.
Thank you.

Isync and nokia 6102i what are my options?

trying to sync to cell phone. found out can not use my cell and I sync. Now the really funny part......... I already deleted ALL the contacts from my cell phone. hehehehehe.... fact of my life. but i do have backup on pc. just hate to go backwards.
what are my options to get address book to sync to nokia 6102i.
thank you.

Hi there...
Ok, i will try to help. I think you are backed up using the address book and im fairly sure you can use isync to get the contacts back on to your phone. If you go into the address book and go to preferences and tick the synchronize with exchange box and then configure it. Then go to isync and try syncing devices...Im pretty sure this should work. Good Luck!!

Events in iCal disappearing after a month

When I look back in iCal to previous month and beyond, all the events that I added (non-repeating events) are gone. I see the Calender events we subscribe to (jewish holidays), birthdays and repeating events but not the ones I added.
I rely on my calendar to serve as my memory of past events so this is causing some issues. Any ideas how to stop this? My husband, who is much better at this stuff than me, has "tried everything" and has given up. Any ideas?

In the preferences menu for iCal - not System Preferences - there is an "Advanced" tab. Click on that and you'll find a number of options having to do with hiding and deleting both events and ToDos and what you want iCal to do with a couple of other features. Make sure that the "Delete events _ days after they have passed" check box is empty. If it is checked, that's probably the source of your problem.

Cannot enter new events in ical on imac using 10.7.5

Should be able to click and new event appears but this in not happening - nothing appears in ical on the imac but on my ipad and iphone there is an new event which is empty - I think I need to re-install the ical but cannot find the instructions to do this in 10.7.5

Hi!
I'm not really sure what you mean. Could you please elaborate/rephrase that? Thank you!
What are your thoughts about this forum? Let us know by doing this short survey.

ICal in Leopard uses max CPU and must be force-quit

I'm having a problem with iCal 3.0 in Leopard. When left running, eventually it will start to use my entire CPU for no reason. I have tried wiping out all of its preference files, and deleted all my "subscribed" calendars (in case it was maybe stuck trying to update one), but it's still acting up. Interestingly, when it goes into this CPU hogging seizure, if I try to quit it normally at that time, the program will quit, but then immediately relaunches itself as "hidden" -- as if it needed to remain open to finish some kind of indexing or something. I find I need to then force quit it twice before it will stay closed and quit being a nuisance.
Something is definitely broken here.
On the other hand, at least the dock icon for it (appears to) always display the correct date now. Although I apparently can't leave iCal running anymore (unless I want to listen to my fan going full blast all day), I'm glad it no longer needs to actually be launched to realize it isn't July 17 every day of the year.
I've seen a few similar reports from other users. Has anyone found a workaround for this yet?

I did some more testing yesterday. I created a new user, launched iCal, played around with it a bit, and left it open for awhile. It never maxed out the CPU or became unresponsive, and appears to be working perfectly with a fresh set of calendars.
As I mentioned in my first post, I had already deleted all of the preference and .plist files in my regular user account, and that did not fix the problem. I have now concluded that there must be something "corrupt" in one of my calendar files (I don't think they are actually corrupt though; my guess is that iCal 3 just has some kind of bug that only occurs with some certain type of legacy data). If I could, I would simply delete those and start fresh, but I have far too much valuable information in there to do that. Unfortunately, it is not possible to export individual events; all I can do is backup and restore entire calendars. I tried that, and the problem continues, so I am at a loss as to how I can solve this without destroying several years worth of data.
As I am not willing to lose all of my old data, I guess I will just have to wait until this nasty bug in iCal 3 gets fixed.

R12.2.4 Data lost after using Dialog Page and return back to calling page.(Help Please! )

Hi Team,
I am new to OAF and is working on a requirement to add some custom validations when the user clicks on a Button in a standard seeded page.
The approach I took was to Extend the seeded Controller object that handled this button press event and put my custom logic in the extended controller and override the standard controller via personalization.
The standard flow was that upon pressing the Complete Button in Page A ,user was taken to the next seeded page (Page B) to perform certain operations based on the records that were selected in Page A.
Part of the custom validation requirement was that if certain validations were not met then the user needs to be shown a Pop-up asking if they really wanted to proceed and if they selected Yes then continue with the standard seeded flow(move to page B) and if they selected NO then just stay on the current page.
I was able to use OADialogPage and do this partially , the issue I am running into is that once the user selects the one or more records using a check box from a multi-record (table) region and hits the Complete Button on page A and if the validation fails then a modal page is shown and the user makes a selection i.e.either Yes or No from the modal page and when they return to calling page (i.e. Page A) , All the Data (records ) that they selected previously is lost (Page is refreshed). Based on what I see on this forum I suspect that it is because after clicking on Yes on the modal page and while returning to the original page the processRequest fires again and VO data is queried again and all selections on the page A are lost. Since I am trying to alter the flow in seeded pages based on user intervention I am kind of lost as to how this issue can be fixed. i.e. either prevent the page refresh or preserve the selections that were made prior to navigating to the modal page. Any Help is truly appreciated !!
My Code :
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
if (oapagecontext.getParameter("completeOps") != null) {
if (warnCount > 0) {
//OAException message = new OAException("Not in Sequence...", OAException.WARNING);
//oapagecontext.putDialogMessage(message);
OAException message = new OAException("Rule XYZ Violated .Do you want continue ?",OAException.WARNING);
OADialogPage dialogPage = new OADialogPage(OAException.WARNING, message, null, "","");
String yes = oapagecontext.getMessage("AK", "FWK_TBX_T_YES", null);
String no = oapagecontext.getMessage("AK", "FWK_TBX_T_NO", null);
dialogPage.setOkButtonItemName("ConYesButton");
dialogPage.setNoButtonItemName("ConNoButton");
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
oapagecontext.redirectToDialogPage(dialogPage);
if (oapagecontext.getParameter("ConYesButton") != null)   {
          // Write Action code for Yes Button
          oapagecontext.putParameter("completeOps", "Continue");
if (oapagecontext.getParameter("ConNoButton") != null){
            // Write Action code for No Button
            String errormsg = "Rule Violations have occured ";
            throw new OAException(errormsg);
   super.processFormRequest(oapagecontext, oawebbean);

I was able to work around this issue by adding a simple check in the processRequest method of my extended Controller to prevent the call to super.processRequest incase when the control returns to the page after the user has made a selection in the Dialog Page
if((oapagecontext.getParameter("ConYesButton") == null) && (oapagecontext.getParameter("ConNoButton") == null)) {
super.processRequest(oapagecontext, oawebbean);
Thanks !

After using Image Capture and watching a video, the screen resolution changes

Hello,
Normally the colors of my screen are clear; The top ruler of each window is grey.
But after scanning a color document, the color is pale. As if someone changed the screen resolution.
Is this a common problem?
My former Macbook Pro died because of a problem with the video system, a default acknowledged by Apple that they didnt want to repair under warranty anymore.
Does this ring a bell?
Today, the colors quickly became normal again, but I'd like to make sure it ' s not going to become a serious problem.
Maybe this sounds kind of vague, well if anyone has something constructive to say about this, please do.
thanks

dairishcajun
When you decided to not copy the files into the iPhoto Library Folder you took responsibility for File Management. iPhoto does not touch your file structure. Therefore, when you delete a photo from iPhoto you have to delete it from your file structure by hand.
This is not the case if you let iPhoto do the File Management.
There is no way to get iPhoto to find the pics you have deleted from it but which remain in your file structure. In the future, you could Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. You can then delete it from there, and after delete it from iPhoto.
BTW, many people hold on to their own file structure because they feel that they will be unable to find a pic in the Finder, should they need it for uploading or emailing. There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, this produces a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Loss of video quality & shaking on DVD after using premiere pro and encore to process material?

Hi guys,
This is my first post out here on the adobe forums (so be gentle) and i am having a small issue which i hope someone can help with.
I made a small video for a friend of mine of her and her partner over the last 10 years of them being together. There is only one small video piece at the start and the rest of the video is picture based with music in the background. Now, i cut, mixed and edited all this material they gave me in Premiere Pro. I also added menu breaks to be able to eventually create scenes in Encore.This worked fine and the quality was great! I then queued this up and added my time line into Encore and began working on the menu screen, scene buttons and using the orphanage to drag my content from. I also set up some poster frames and so far all looked great.
Before building the DVD, i tested for errors and all came back clear. I changed it burning directly to a dvd disc, and instead built it as a DVD image, which created an ISO file on on my pc. From watching a few tutroials, ImgBurn was suggested as a great tool to burn the ISO onto DVD. So far, this was looking good. I then placed my new DVD into my Blu-Ray/DVD player and on screen came this pixelated image. I wasnt terrible, but it wasnt great either, not the sort of quality i was used to. I proceeded to start the movie and the picture was worse, the screen was shaking up and down constantly (only by about half a centimeter up and half down) and the quality was terrible.
Is there anyway to fix this?
(Happy to run through all my settings with someone on the phone or online. Happy to call overseas in need be, as i am in Australia)
Thanks guys
Rein

erm... ok, you might have to go back a page or two... cause i am not so familiar with all the terms and lingo....lol
Where would i find this field dominance?
I did initially export it as a bluray, but then had to change it to dvd since i dont have a bluray burner. They dont give you any other options in encore besides DVD, Bluray or flash...

No sound after using DVD Decrypter and Videora

Last night I used DVD decrypter to rip Fight Club and then used Videora to covert the .vob file to MPEG-4, following the directions on the Videora website. I loaded into iTunes, and then onto my iPod, but the sound doesn't work at all even though the video looks great. I have converted two .avi files with videora and I've had no problem watching them on my iPod. I did notice that the instructions on the videora site said to only select the top movie in the list that has all the 2 channel and 6 channel files. The movie plays in iTunes with no sound as well. Anyone have any ideas?

OK, I am an idiot. I only selected the video and forgot the 6 channel audio.
Note for future people with this problem:
Don't just select the first file in the list under stream processing like Videora's website says. You also need to select an audio file to rip and from what I'm hearing, to avoid problems, select the 6 CH audio.

I cannot add storage to my icloud even after using settings menu and manage storage, signing in, and pressing BUY button.

help
i sign in to iTunes store from settings menu etc etc ---manage storage---- buy $20.00 plan ( 15 gb )
password, etc
says
INSUFFICIENT FUNDS
I know that ! that is why i want to add funds !!!

Hello FirstTimeUser712,
Thank you for contacting Apple Support Communities.
I would suggest updating your iCloud billing information before you attempt to upgrade your storage plan.
See the following article:
support.apple.com/kb/PH2616
http://support.apple.com/kb/PH2616
Regards,
Jeff D.

Relocating music files after using migration assistant and time machine

Hello
I recently purchased an i7 MBP because my previous 15 in was stolen. Luckily I had a time machine backup of the old machine - my previous MBP was the Intel 2 Core Duo model just before the refresh to the i5/i7s
So far what I did is ran migration assistant to bring my files over
Everything seems to be fine, except when I got to iTunes much of my music is listed but I get the exclamation mark symbol next to most of the music and movies and apps
I am trying to figure out how to fix this and relocate my files
I know I could access my time machine backup by browsing other time machine disks, but I can't browse the music folder in a previous backup because I don't have the permisson to access it
Any suggestions would be greatly appreciated!!

Victor:
If you correctly transferred your music files the problem is with your iTunes Library file.
Open iTunes and quickly press the option key. A window will show to ask you to select the library file. Browse for it and it should fix the problem.

E73 Compatibility with iSync and Nokia Multimedia ...

Just switched from an N95 to a E73 and can't get my Mac to sync with the phone. Are there updates available or planned?

I am having the same problem. My E73 is unlocked (purchased from ebay). The phone works well in every other respect but I cannot get iSync to recognize it, nor can I get the plug-in from Nova Media to recognize it. I'm now wondering if there is something about the unlocking process that is preventing the kind of bluetooth connection iSync needs.
If anyone has info., please reply. I have been investigating and working on this for over a week. If I cannot sync my data, I'll have to get rid of this phone.
I've attached a picture of what Nova Media's application says. As you can see, my Mac won't even provide the right icon for the E73, whereas it does for the E71 and E7. (I've sold the E71 and returned the E7, so I can't use them).
Attachments:
Unsupported Nokia E73 - Nokia's isync plugin.png ‏31 KB
Unsupported Nokia E73-nova media plugin.png ‏104 KB

Events in iCal doubled after use of iSync and Nokia 6300

Similar Messages

Maybe you are looking for