Events in the activities of screen flow

Hi
Please help the following:
I set not to generate events in the activities of screen flow (screen flow properties), but generates events, there is additional configuration?

Hi
In the project, I indicated in advanced properties of each process that generates events in interactive activities and in the advanced properties of each screen flow, that does not generate events, but in Studio is generating events in the screen flow.
Please provide support, whether a procedure or additional configuration.

Similar Messages

7 day view of Calendar Events on the Slide to Unlock Screen???

Does anyone agree that an option to view Calendar of Events on the Slide to Unlock Screen would be a quick and easy way to review your next events and appointments?
Message was edited by: page79
Message was edited by: page79

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Event 123 - The DSM service was delayed by nn seconds for a driver query/download/install on device then screen freezes

The reader's digest version of the saga is I received a Dell Vostro 460 with a wiped disk. The PC emitted beep code indicating PSU or RAM issue when turned on. After resolving the marginal power supply with a new replacement, I installed Windows 7
but as soon as I would launch IE the system would freeze. All of the BIOS & device drivers are current. I tried upgrading to Windows 8 but kept getting the black screen right after the install process finished installing the devices. I had
to resort to a clean install. Having successfully install Windows 8.1 I have been able to a get to the desktop, however every time I launched IE my system freezes in the same way as with Windows 7. I installed a different browser and used that
to research the event log errors. As the system freezes, I see warning log entries with event id 123 entries:
Event 123 - The DSM service was delayed by 125 seconds for a driver query/download/install on device 'ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_________INTEL(R)_CORE(TM)_I7-2600_CPU_@_3.40GHZ\_8'
Event 123 - The DSM service was delayed by 517 seconds for a driver query/download/install on device 'PCI\VEN_8086&DEV_1C3A&SUBSYS_04AB1028&REV_04\3&11583659&0&B0'
Event 123 - The DSM service was delayed by 106 seconds for a driver query/download/install on device 'PCI\VEN_8086&DEV_0100&SUBSYS_04AB1028&REV_09\3&11583659&0&00'
Event 123 - The DSM service was delayed by 155 seconds for a driver query/download/install on device 'PCI\VEN_10DE&DEV_0423&SUBSYS_049410DE&REV_A1\4&2209AF9F&0&0008'
There are more but these warnings are stacked in groups of two or three then the error & critical entries indicating I did a hard reboot.
When I use Firefox browser to open several tabs everything is fine until I stream audio/video then the same freeze screen happens and i have to reboot. Anything you can offer will be very much appreciated.

Hi,
'PCI\VEN_10DE&DEV_0423 is a graphic card driver from the vendor’s official webpage.
Besides as you mentioned in the post, it happened when you launch Internet Explorer, there is an accelerated Graphics item in the Internet Explorer, the settings should be changed, please follow this way:
Go to the control panel, then select the Internet Option, go to advance, just like the screenshot below:
select the checkbox if it is empty, anyhow make it different from the previous settings, then restart your computer to see the result.
Wade Liu

Selection screen flow logic change not taking affect. Please help!

Hi
   When I am trying to change the selection scren flow logic I get the following message:
Selection screen: Report generation makes screen changes ineffective.
Whatever I am changing is not taking affect in runtime.
Even though I have activated the changed code for the screen
What shall I do resolve this?
Thanks
Gopal

You should not be changing the screen flow logic of a standard selection screen 1000. It will always be regenerated. In order to modify the standard selection screen, you can do this in the AT SELECTION-SCREEN output event and loop at screen and change the attributes.
Loop at screen.
if screen-name = 'P_CHECK'.
    screen-input = '0'.
    modify screen.
endif.
endloop.
Regards,
Rich Heilman

Bug? My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future.

My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future even though I can see them on the month, week and day view. Any suggestions on how to fix it? I've tried it all. I called the apple support and they checked on their iPads. They all did the same and they couldn't help me. They suggested trying this way. I'd like to be able to plan a few years ahead and the year view would make thing so easy!
Is this a bug?

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

How do you add an application event to the Applications Panel

How do you add an application event to the Applications Panel.
My previous post referred to .ashx files, and the problem seems that Firefox, by default, does not recognize a .ashx format being read by Adobe Acrobat.
Therefore there needs to be a way to add Applications and Events into the Applications Panel under Preferences

domdp wrote:
...I have Theme L selected and I get 10 icons along the left side and bottom....
...I am thinking I may be limited to 10 icons....
Gotcha... But actually its limited to 9 icons in the L theme as the Profiles icon is always present. From that screen hit the Menu key to display the bigger list of icons. Arange them so the first 9 icons are the ones you want to see on the L theme.

How do I enter a event into the calendar

I just switched from Android to Apple iPhone. When I try to use the calendar, nothing happens. The calendar comes up, it shows the correct dates, I can move from list to day to monthly view. But when I try to enter an event, nothing happens. I have set up the calendar in the set up screen. What gives? Is it defective?

Entering an event is done by tapping on the "+" on the upper right corner of the screen. If that is not there, it may be because you are using iCloud. That has been an issue at times. Generally toggling iCloud off and on will correct that.

Useful Code of the Day: Splash Screen & Busy Application

So you are making an Swing application. So what are two common things to do in it?
1) Display a splash screen.
2) Block user input when busy.
Enter AppFrame! It's a JFrame subclass which has a glass pane overlay option to block input (setBusy()). While "busy", it displays the system wait cursor.
It also supports display of a splash screen. There's a default splash screen if you don't provide a component to be the splash screen, and an initializer runner which takes a Runnable object. The Runnable object can then modify the splash screen component, for example to update a progress bar or text. See the main method for example usage.
It also has a method to center a component on another component (useful for dialogs) or center the component on the screen.
NOTE on setBusy: I do recall issues with the setBusy option to block input. I recall it having a problem on some Unix systems, but I can't remember the details offhand (sorry).
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
* <CODE>AppFrame</CODE> is a <CODE>javax.swing.JFrame</CODE> subclass that
* provides some convenient methods for applications. This class implements
* all the same constructors as <CODE>JFrame</CODE>, plus a few others.
* Methods exist to show the frame centered on the screen, display a splash
* screen, run an initializer thread and set the frame as "busy" to block
* user input.
public class AppFrame extends JFrame implements KeyListener, MouseListener {
 * The splash screen window.
 private JWindow splash = null;
 * The busy state of the frame.
 private boolean busy = false;
 * The glass pane used when busy.
 private Component glassPane = null;
 * The original glass pane, which is reset when not busy.
 private Component defaultGlassPane = null;
 * Creates a new <CODE>AppFrame</CODE>.
 public AppFrame() {
 super();
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified
 * <CODE>GraphicsConfiguration</CODE>.
 * @param gc the GraphicsConfiguration of a screen device
 public AppFrame(GraphicsConfiguration gc) {
 super(gc);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title.
 * @param title the title
 public AppFrame(String title) {
 super(title);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title and
 * <CODE>GraphicsConfiguration</CODE>.
 * @param title the title
 * @param gc the GraphicsConfiguration of a screen device
 public AppFrame(String title, GraphicsConfiguration gc) {
 super(title, gc);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title and
 * icon image.
 * @param title the title
 * @param icon the image icon
 public AppFrame(String title, Image icon) {
 super(title);
 setIconImage(icon);
 init();
 * Creates a new <CODE>AppFrame</CODE> with the specified title and
 * icon image.
 * @param title the title
 * @param icon the image icon
 public AppFrame(String title, ImageIcon icon) {
 this(title, icon.getImage());
 * Initializes internal frame settings.
 protected void init() {
 // set default close operation (which will likely be changed later)
 setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
 // set up the glass pane
 glassPane = new JPanel();
 ((JPanel)glassPane).setOpaque(false);
 glassPane.addKeyListener(this);
 glassPane.addMouseListener(this);
 * Displays a new <CODE>JWindow</CODE> as a splash screen using the
 * specified component as the content. The default size of the
 * component will be used to size the splash screen. See the
 * <CODE>showSplash(Component, int, int)</CODE> method description for
 * more details.
 * @param c the splash screen contents
 * @return the window object
 * @see #showSplash(Component, int, int)
 * @see #hideSplash()
 public JWindow showSplash(Component c) {
 return showSplash(c, -1, -1);
 * Displays a new <CODE>JWindow</CODE> as a splash screen using the
 * specified component as the content. The component should have all
 * the content it needs to display, like borders, images, text, etc.
 * The splash screen is centered on monitor. If width and height are
 * <CODE><= 0</CODE>, the default size of the component will be used
 * to size the splash screen.
 * 
 * The window object is returned to allow the application to manipulate
 * it, (such as move it or resize it, etc.). However, do not
 * dispose the window directly. Instead, use <CODE>hideSplash()</CODE>
 * to allow internal cleanup.
 * 
 * If the component is <CODE>null</CODE>, a default component with the
 * frame title and icon will be created.
 * 
 * The splash screen window will be passed the same
 * <CODE>GraphicsConfiguration</CODE> as this frame uses.
 * @param c the splash screen contents
 * @param w the splash screen width
 * @param h the splash screen height
 * @return the window object
 * @see #showSplash(Component)
 * @see #hideSplash()
 public JWindow showSplash(Component c, int w, int h) {
 // if a splash window was already created...
 if(splash != null) {
 // if it's showing, leave it; else null it
 if(splash.isShowing()) {
 return splash;
 } else {
 splash = null;
 // if the component is null, then create a generic splash screen
 // based on the frame title and icon
 if(c == null) {
 JPanel p = new JPanel();
 p.setBorder(BorderFactory.createCompoundBorder(
 BorderFactory.createRaisedBevelBorder(),
 BorderFactory.createEmptyBorder(10, 10, 10, 10)
 JLabel l = new JLabel("Loading application...");
 if(getTitle() != null) {
 l.setText("Loading " + getTitle() + "...");
 if(getIconImage() != null) {
 l.setIcon(new ImageIcon(getIconImage()));
 p.add(l);
 c = p;
 splash = new JWindow(this, getGraphicsConfiguration());
 splash.getContentPane().add(c);
 splash.pack();
 // set the splash screen size
 if(w > 0 && h > 0) {
 splash.setSize(w, h);
 } else {
 splash.setSize(c.getPreferredSize().width, c.getPreferredSize().height);
 centerComponent(splash);
 splash.show();
 return splash;
 * Disposes the splash window.
 * @see #showSplash(Component, int, int)
 * @see #showSplash(Component)
 public void hideSplash() {
 if(splash != null) {
 splash.dispose();
 splash = null;
 * Runs an initializer <CODE>Runnable</CODE> object in a new thread.
 * The initializer object should handle application initialization
 * steps. A typical use would be:
 * <OL>
 * <LI>Create the frame.
 * <LI>Create the splash screen component.
 * <LI>Call <CODE>showSplash()</CODE> to display splash screen.
 * <LI>Run the initializer, in which:
 * <UL>
 * <LI>Build the UI contents of the frame.
 * <LI>Perform other initialization (load settings, data, etc.).
 * <LI>Pack and show the frame.
 * <LI>Call <CODE>hideSplash()</CODE>.
 * </UL>
 * </OL>
 * 
 * NOTE: Since this will be done in a new thread that is
 * external to the event thread, any updates to the splash screen that
 * might be done should be triggered through with
 * <CODE>SwingUtilities.invokeAndWait(Runnable)</CODE>.
 * @param r the <CODE>Runnable</CODE> initializer
 public void runInitializer(Runnable r) {
 Thread t = new Thread(r);
 t.start();
 * Shows the frame centered on the screen.
 public void showCentered() {
 centerComponent(this);
 this.show();
 * Checks the busy state.
 * @return <CODE>true</CODE> if the frame is disabled;
 * <CODE>false</CODE> if the frame is enabled
 * @see #setBusy(boolean)
 public boolean isBusy() {
 return this.busy;
 * Sets the busy state. When busy, the glasspane is shown which will
 * consume all mouse and keyboard events, and a wait cursor is
 * set for the frame.
 * @param busy if <CODE>true</CODE>, disables frame;
 * if <CODE>false</CODE>, enables frame
 * @see #getBusy()
 public void setBusy(boolean busy) {
 // only set if changing
 if(this.busy != busy) {
 this.busy = busy;
 // If busy, keep current glass pane to put back when not
 // busy. This is done in case the application is using
 // it's own glass pane for something special.
 if(busy) {
 defaultGlassPane = getGlassPane();
 setGlassPane(glassPane);
 } else {
 setGlassPane(defaultGlassPane);
 defaultGlassPane = null;
 glassPane.setVisible(busy);
 glassPane.setCursor(busy ?
 Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR) :
 Cursor.getDefaultCursor()
 setCursor(glassPane.getCursor());
 * Handle key typed events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param ke the key event
 public void keyTyped(KeyEvent ke) {
 ke.consume();
 * Handle key released events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param ke the key event
 public void keyReleased(KeyEvent ke) {
 ke.consume();
 * Handle key pressed events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param ke the key event
 public void keyPressed(KeyEvent ke) {
 ke.consume();
 * Handle mouse clicked events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseClicked(MouseEvent me) {
 me.consume();
 * Handle mouse entered events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseEntered(MouseEvent me) {
 me.consume();
 * Handle mouse exited events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseExited(MouseEvent me) {
 me.consume();
 * Handle mouse pressed events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mousePressed(MouseEvent me) {
 me.consume();
 * Handle mouse released events. Consumes the event for the glasspane
 * when the frame is busy.
 * @param me the mouse event
 public void mouseReleased(MouseEvent me) {
 me.consume();
 * Centers the component <CODE>c</CODE> on the screen.
 * @param c the component to center
 * @see #centerComponent(Component, Component)
 public static void centerComponent(Component c) {
 centerComponent(c, null);
 * Centers the component <CODE>c</CODE> on component <CODE>p</CODE>.
 * If <CODE>p</CODE> is null, the component <CODE>c</CODE> will be
 * centered on the screen.
 * @param c the component to center
 * @param p the parent component to center on or null for screen
 * @see #centerComponent(Component)
 public static void centerComponent(Component c, Component p) {
 if(c != null) {
 Dimension d = (p != null ? p.getSize() :
 Toolkit.getDefaultToolkit().getScreenSize()
 c.setLocation(
 Math.max(0, (d.getSize().width/2) - (c.getSize().width/2)),
 Math.max(0, (d.getSize().height/2) - (c.getSize().height/2))
 * Main method. Used for testing.
 * @param args the arguments
 public static void main(String[] args) {
 final AppFrame f = new AppFrame("Test Application",
 new ImageIcon("center.gif"));
 f.showSplash(null);
 f.runInitializer(new Runnable() {
 public void run() {
 f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 f.getContentPane().add(new JButton("this is a frame"));
 f.pack();
 f.setSize(300, 400);
 try {
 Thread.currentThread().sleep(3000);
 } catch(Exception e) {}
 f.showCentered();
 f.setBusy(true);
 try {
 Thread.currentThread().sleep(100);
 } catch(Exception e) {}
 f.hideSplash();
 try {
 Thread.currentThread().sleep(3000);
 } catch(Exception e) {}
 f.setBusy(false);
"Useful Code of the Day" is supplied by the person who posted this message. This code is not guaranteed by any warranty whatsoever. The code is free to use and modify as you see fit. The code was tested and worked for the author. If anyone else has some useful code, feel free to post it under this heading.

Hi
Thanks fo this piece of code. This one really help me
Deepa

What events change the Created field in, finder, get info

On my laptop, in finder, in the get info screen there are 2 fields the Created Date and Modified Date fields.
I was looking at these fields for an app that I use on my iPhone, it was listed in finder, so I clicked the get info option.
The created date and modified date were 10/16 both the same.
I have not used this app in a long time, my question is this.
What event changes the created field? If the app was downloaded on the Iphone will the created field get updated in finder?
or if it was an update on itunes, would that change the created date in finder?
Does the created date mean that the app was downloaded and installed on that date?

Thank you so much. That works just fine. However, I also just discovered something. Evidently, at least some of the fields in list view are editable. By adding Grouping to the columns shown and clicking on the empty field, I was actually able to type whatever I needed into the field.
I have not yet tried it with other fields, but will do so to see if it works for all fields in the list view.
Laura

Need to collect the Windows logon and logoff events across the Domain in a DC eviornment, for different machines and user accounts.

Hello All,
I am trying to build a Tool to collect the info about all the user's who login and logoff on daily basis in a domain network. I am using a windows 2008 server as a DC and have xp, win 7, win 8 , win 12 server as clients in the network.
There are few questions in my mind which I am not able to answer.
1> When a user tries to login to the DC network, he/ she gets authenticated using the kerberos protocol. does these authentication gets logged on the AD server by default? I have see a way to enable it from registry but even that's not giving me the expected
output in the eventvwr.
2> Do I have to use Audit policies to monitor all the user's log off and log on activities?
3> Is there a way to collect these information from any place on the AD server other than the Eventvwr?
Please help me in finding the solutions to these query's of mine.
Thanks.

1. Open the Group Policy Management console on any domain controller in the target domain: navigate to Start → Administrative Tools → Group Policy Management.
2. In the left pane, navigate to Forest: <domain_name>→ Domains → <domain_name>→ Domain Controllers. Right-click the effective domain controllers policy (by default, it is the Default Domain Controllers Policy), and select Edit from the pop-up
menu. </domain_name></domain_name>
<domain_name><domain_name>3. In the Group Policy Management Editor dialog, expand the Computer Configuration node on the left and navigate to Policies → Windows Settings → Security Settings → Local Policies → Audit Policy. </domain_name></domain_name>
<domain_name><domain_name>4. Set the Audit account management and the Audit directory service access policy to "Success". Set the Audit logon events policy to "Success" and "Failure". </domain_name></domain_name>
5. Navigate to Start → Run and type '"cmd". Input the gpupdate /force command and press Enter. The group policy will be updated.
Number of events could be excessive so you need to adjust size of Security log ( 1gb for example )
Usage of EventCombMT Tool (part of
MS ALtools )
 This tool gathers specific events from several different servers to one central location.
 Run the EventCombMT.exe > Right Click on Select to search field > Choose Get DCs in Domain > Mark your Domain Controllers for search
 Click the Searches menu > replace Event ID field values with
4624 LOGON / 4634 LOGOFF
 Click Search and wait for the process to complete the operation.
 After the search is done the output directory contains the log files for the domain controllers where events with the specified Event ID’s were found.
Alternatively you can try Netwrix Auditor for Active Directory solution with 20 days of free trial to generate such reports.
--- Jeff (Netwrix)

Why can't I get the activities to open in "The Land of Me?"

I have "The Land of Me" loaded and can get as far as trying to opening the activities and the following error message displays on the screen,."There was an internal processing error. Manually retry or check the firmware updates."
I have done these and even sent a questionnaire to the company with no response.
I am using Hp 8600 Premium printer and have had no other problems accessing any other apps.
Thank You for any help you can provide.

I don't know what I did to solve this, but I think it's solved by making a "duplicate of each track, then the tracks are all independent , got that from the LUG too

Screen Flows Not Working Correctly

We are using OPM 10.2.
We decided to extensively use screen flows because we had a requirement wherein the user should be allowed to navigate back and forth on the OPA screens.
If we do not use screen flows the following screnario occurs..
We've a rule which is satisfied if all attributes on Screen1 Screen2 and Screen3 are known.
User enters details on Screen1 and Screen2, but he wants to navigate back from Screen3 to Screen1, he reaches Screen1 by hitting browser Back twice, but when he again hits
Submit on Screen1 he's directly navigated to Screen3 skipping Screen2. This is because all attributes on Screen2 had been collected in first iteration.
We used screen flows expecting that this would force the required screen order, but it is also behaving in similar way.
Does it have any thing to do with the way the rules are written.
Thanks In Advance.

Hi user1002818,
The reason that the screens aren't being displayed again is because then engine has the data which was collected on those screens - from a rules point of view there is no need to display them again. To enforce a particular forward/backwards flow we have Interview Flows, which it sounds like you've already started to use.
One of the reasons that OWD doesn't support an OOTB 'back' button is because navigating backwards in a session has the possibility of invalidating data 'upstream' in the interview. e.g. I fill in some personal details on one screen, on screen 2 I say that I have children, and on screen 3 I create children instances. When I navigate back and change my previous answer to 'I do not have children' what happens to the children instances which I've created? Semantically my session is now invalid. It's a choice left up to the customer/project as to how they want to manage their session validity (delete the data, show the data and ask the customer if it's valid or just do nothing).
One way to achieve what you want to do would be to author rules as normal and manage the screen flows via a simple push/pop stack implementation which keeps track of screen submissions and data entered on those screens. This will give you the flexibility to both delete invalid data or display it to the user again as you wish
Could you tell me which project it is that you're working on at the moment please? I'm working on large UK project at the moment and the OPA team is providing support to achieve something very similar.

How to suppress 'spurious' update events where the entry is identical

We often have clusters with event listeners on reference data caches. These caches are refreshed by calling putAll() to update values efficiently. Although this is efficient, and keeps refresh code simple, many unwanted 'spurious' update events are generated. Spurious in the sense that in most of update events the old and new values are the same.
We considered using a MapTrigger to suppress these uninteresting update events. The problem is how to implement a 'veto' in the MapTrigger.process method. What we'd like to do from a trigger is:
if (old value == new value)
ignore new entry
else
process, enrich, or validate new entry as desired...
end ifWe'd like a clean way to signal from a MapTrigger that an entry should be ignored (rather than rejected). The Javadoc shows two possibilities:
*(1)* undo the pending change by resetting the entry value to the original value obtained from MapTrigger.Entry.getOriginalValue();
*(2)* reject the pending change by throwing a RuntimeException, which will prevent any changes from being committed, and will result in the exception being thrown from the operation that attempted to modify the map
Of these *(2)* Causes a put() failure in the client. That is appropriate for something like a validation failure, but not for simply ignoring an unwanted update. Option *(1)* unfortunately generates an update event!
Our current workaround is a MapEventTransformer to suppress the spurious updates:
public class UpdateSupressionTransformer implements MapEventTransformer {
/** Avoid sending an update event if the value is unchanged */
public MapEvent transform(MapEvent e) {
    if (e.getId() == MapEvent.ENTRY_UPDATED) {
      if (e.getNewValue().equals(e.getOldValue())) {
        return null;
    return e;
}This works well but requires client code to register event listeners correctly. It also means that the unecessary change is still generated in the cache. For example a cache stores will be called needlessly.
Can a feature be considered to allow a clean way for identical updates to be ignored, or to not generate events?
Ideally this would be before the update is made - like a trigger. It seems a pity the MapTrigger design does not allow this.
Such a feature would allow simple cache refresh logic using putAll() - without having to check for deltas - avoiding large numbers of unwanted update events. We think this is likely to be a common requirement.
Cheers,
phil

Hi,
I dont think that this is the problem associated with portal.You are working on BI queries in portal but BI screen that you are working on is of SAP R/3 correct me is i am wrong??And the message you are getting is of R/3 screen,BI screens are shown in an iview and an iview cant show any message..
Regards,
Ameya

How to change the attributes of screen fields dynamically


well i have created a table by name empmaster_data with following fields.
*emp_id.
*emp_fname.
*emp_lname
*dob.
*doj.
*dept.
*desig.
now using a single screen i want to create,change and display the information.even i am using save and exit button.
now i want to change the attributes of screen fields dynamically like active,input,output,invisible.

Hi,
Have Different Radio Buttons for the purposes what you have and use AT Selection Screen Output, Under the event Use loop at screen and with continue with your requirement.
Hope This Info Helps YOU.
Reward Points If It Helps YOU.
Regards,
Raghav

How can I quit my iPhoto screen that as crashed and locked on. The locked screen has no iPhoto file list on the left and the part of the screen that should have uploaded photos is blank except for the rotating download icon in the centre of screen. Help?I

My SD card reader has caused my iPhoto screen to be locked with no list of files on the lefthand side and a blank main photo area apart from the rotating download icon operating in the centre of the photo part of the screen.
I have tried to quit iphoto but when I restart it the same locked screen appears.
I believe I caused this problem when I removed my SD device without first ejecting it when the blank screen appeared without downloading my new photos.
Can anyone help a 66 year old computer illiterate fool ?.
Regards

Use Force Quit (under the Apple menu at the top) to close iPhoto. Then try opening it again. If it locks up again force quit and try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists.
If the problem does not persist try the following: make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If the problem persists in the test library do the following: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Events in the activities of screen flow

Similar Messages

Maybe you are looking for