Events - Incorrect Dates after split

Hi All
Wondering if you are having the same issues as I am, or can help....
I have a coupe of cases where I have split an event which took place over a couple of days (I imported the pictures on a specific day, but iPhoto did not create separate events for each days shooting).
Now that I have separate events, with photos spanning one day in each event, the displayed date as seen in the Events screen when you skim, is incorrect.
The displayed date will show something like 24 Dec 2006 - 12 March 2007, but the pictures in the event were only taken on the 24th December... Hope the above makes sense?
Does anyone know how to correct this? Selecting the 'change date & time' option (with events selected) only changes the date/time of all the pictures within the event but not the date of the event itself.
Thanks and Regards
Scott

Step one is to correct the date on the Photos as you did (You could have used the adjust date & time eature too)
Then open the event an dselect one photo and create a new event. This new event will have the correct date. Then drag the remaining photos (with correct dates) to the new event and you will ahve an event with the correct dates
I'm hoping that APple addresses this in the future but for now this seems to be the only way to get the event's attention to update the date range
Larry Nebel

Similar Messages

Events a mess after splitting and adjusting time.(iphoto '11)

My most recent event is such a mess I don't really know where to start without writing an essay, in the hope that it's been seen before I'll be breif but am willing to expand and provide screenshots etc if it will help.
Basically, I've duplicated the contents of the event twice and ended up with 3 events called 'original', '16:9' and '4:3' (hopefully no explanation needed).
So the first thing I notice is when I click on any of these events, all 3 are shown in list view (with the collapsable arrows) but only one of the events will actually display the photos despite the others saying that they have the correct number of photos.
I'm wondering if this is now how iPhoto 11 works, if it is fair enough, I haven't actually split events like this before in this version) and if it is can I delete the two events that don't show photos without affecting the third event, I haven't tried so far just in case.
But it gets worse, I've collected together photos other people have taken and adjusted the time so they display in order, now instead of all all my photos being listed in one of the events I have a few in each and no matter what I do I don't seem to be able to regroup them except by highlighting all 3 events and opening them together.
My issue is compounded because I have a lot of photos in this event(s) and the more I try to move them around the more complicated it is to keep track of them.

Old Toad wrote:
How did you duplicate the photos in the original event and then create a new separate event with those duplicates?
cmd-D to duplicate, select the second photo (I sort by date, so the second photo is the duplicate of the first), split event, (this moves all but the first photo into a new event), manually select all the originals in the new event and drag them into the first event.
When you open one of the events with no photos do you see any thumbnail windows, although blank?
No. Unfortunately I've been doing a little more fiddling so can't post a proper screenshot but using the one below as an example:
Click to enlarge
You will see the numbers of photos don't add up.
By way of example:
Three events (original, 16:9 & 4:3)
By selecting 'original' from the main event window I get what you see, it's as though I'd selected all three events before double clicking but didn't.
By selecting '16:9' from the main event window, all 3 events will open again in list view, in this view the 'originals' heading has the other 86 photos/thumbs in, the '16:9' heading has the other 86 photos/thumbs in, and the '4:3' heading has 1 photo/thumb in.
By selecting '4:3' from the main event window, all 3 events will open again in list view, in this view the 'originals' heading has no photos/thumbs in, the '16:9' heading has has no photos/thumbs in, and the '4:3' heading has 1 photo/thumb in.
If I do select all 3 events in the main event window and double click, I get all three headings with all the photos/thumbs in.
That was up until a moment or two ago, now if I repeat the action in coloured text, I don't get headings for events that don't show any photos.

Incorrect data after activating the request through Process chain.

Dear SDN chaps.
Today morning. I encountered a strange issue in DSO..
I have DSO which is updating from the AL11(application server) flat file.
While i am loading it to PSA there were no issues and after loading it to the DSO there is no issue and its passing through the routine and the data is populating properly in NEW data Table .But after successful activation of the request through process i am getting the wrong records in active data table.
Then i deleted the request and reran it manually i mean triggered the DTP and ran the manual activation surprisingly accurate records are coming through manual process..
I am just wondering why it is not working through process chain and why it is showing incorrect records through process chain execution and how it is showing accurate records through manual uploading process..'
Could some one please help to come out from this..By the way mine is SAP BI 7 SP20 &SP05 for BW 7.01
Thanks
K M R

Hi Pra
Thanks for your response..
We are doing PSA deletion and then we are uploading the data to PSA as well as DSO.
Now the issue is not in the part of loading we are facing the issue in Actiation of request if i am executing the activation through process chain it is sucess but the values are incorrect. If i am doing the manual activation it sucess with correct data.
Even i tried with a new chain but still i am facing the issue.
Surprise thing is in new data table the data is perfect in both the ways like manual upate and Process chain update only during activation i am getting incorrect record in the active data table..
Appreciate your help on this....
Thanks
K M R
Edited by: K M R on Jul 9, 2010 11:09 AM

Can incorrect dates after library rebuild be changed?

I rebuilt the Iphoto Library, trying to follow instructions on this forum.
"Once your images have been imported, check through the library, and make sure everything looks ok."
There are several rolls that are incorrectly sorted, meaning the dates are wrong. I didn't check them all, but I imported about 1500 images, and there are several rolls placed in 2006 Jan, that are wrong.
From this forum, it seems that images taken with a camera which didn't have the date set, or no date showing for some other reason, is the reason iphoto can't read them.
Since I read that I'm NOT to touch anything in the Library in the Finder, can I change the dates somehow, to correct them?
Its only by going there that I can see them this way. Now is the time to fix things I guess, before I go remaking albums and keywords.
I may run into this a lot, when I import more of my images. They span back several years and several cameras and scans.
What else do I look for wrong? ie. Someone sent me photos with a comma in the name.. can/should I rename them in CS2, then delete the O?
As I'm new to Mac and iphoto, (I have 5.0.4) I've made a lot of newbie errors, and appreciate this forum for help.
Any tips or links to threads on dates, and importing from CD (cds not having iphoto library) thanks.
And THANKS for the tip on looking at slideshow of cd in Tiger.. I found that once you choose the slideshow option, there is an icon that will bring up a *contact sheet*, when you mouse over the thumb you can send it to iphoto.. this was the greatest help to me!!!
/And if anyone here uses Bridge, (I know its not an Adobe forum I'm a newbie at Bridge as well..) Bridge is not showing my new library in the Folders Pane. How to fix this?

I found this thread on wrong dates for ip6, with recommendation to reset manually.. if this is the anwser for me, will I have to check to do this for all my future imports?
http://discussions.apple.com/thread.jspa?messageID=1572780&#1572780

Incorrect dates after upgrading to Elements 12

After converting my Elements 11 catalog to R12, I noticed a large number of photos had the date I had assigned changed to a totally erroneous date. 12/1969 was one group. Prior to the upgrade, I had written the metadata including tags and dates to the actual picture files.
Is there a way to rebuild the catalog using the original picture files and have Elements pick up the metadata info from the actual file? The alternative is to manually reapply the correct dates which is a monumental task.

Hi there,
              There will not be any issue with the uninstallation of Photoshop Elements 10 [ PSE10 ] after you have upgraded [ installed Photoshop Elements 12 ].
              Before you uninstall the PSE10, please make sure that you have the serial number of it. [ Find your serial number at ( Find your serial number quickly ) ].
              If you do not have the installation media, if it's a CD, you can download PSE10 again from [ Other downloads ].

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

My iphone 5s got stolen and the option to erase data after 10 tries was not enabled. What happens after the incorrect password is input after 10 times?

my iphone 5s got stolen and the option to erase data after 10 tries was not enabled. What happens after the incorrect password is input after 10 times?

After the sixth erroneous passcode entry a delay is imposed that increases exponentially and eventually reaches over 40 years before another attempt can be made.
No one yet knows how long the next delay is.

Events show incorrect date

I posted Xmas pictures from this past holiday that were taken on that same day, but iPhoto creates a date of January 2006.
When I edit it to make it 12-25-2009, a range is created "Jan 2006 to Dec 2009". Can this be fixed?

How did you edit the photo's date? Did you try selecting all of the photos in the Event and use the Photos->Adjust Date menu option. That will let you change just the year in the date and leave all of the other elements as they are. The Event will then indicate just the one day as the Event's date.
Click to view full size
OT

Unable to stop incorrect date exports

How do we set up a form in Adobe Acrobat XI that allows dates to be formatted a certain way (mmm/dd/yyyy) and exported in the same way to Excel and always be recognized as a "proper" date in Excel?
Currently the following does not work (Attempt #1):
Set up a field; Set the format category as date; Set up a Custom format of "mmm/dd/yyyy"
Create a distribution file
When users fill out the form if they type in an incorrect date, eg., "August 27 2013", the form automagically shows the date on the PDF as "Aug/27/13" - Great!
When the users submit the form and it's brought into the response file the dates are shown in a default date format of mm/dd/yyyy - Fine, once the form owners understand this
When the form owners export the information the data exported is the same as the original users entered it, not as it was automagically formatted to. For instance, if submitters originally entered "August 27, 2013" then that's what goes across to Excel. And some of these formats Excel doesn't know how to convert. - Understandably frustrating for form owners
Attempt #2: As a workaround we set up special formatting that has a mask of "AAA/99/9999". This at least provides forces the users to use the same formatting, but is confusing the submitters when they need to enter dates from 1-9 and we've also found that the conversion of this format to a date in Excel doesn't work, but at least it's consistent! Javascript was also added to force users to use specific month abbreviations.
d = new Date(event.value.replace(/-/g, " "));
if (!Date.parse(d)){app.alert("Please enter in a proper date.\n\nThe month abbreviations are: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec");}
Attempt #3: The last attempt was to continue to use the set up as Attempt #1, but to also use the javascript from Attempt #2. The theory being that if a user entered in "August 27 2013" the javascript would complain. Alas, the javascript appears to run after Adobe automagically does its date format conversion.
Does anyone know how to get around this or have any other ideas to either enforce a usable date format or have Adobe export the dates as they've been automatically formatted to? We've tried to find a way to turn off the automatic date conversion that Adobe's running, but haven't found a way yet. Another option seemed to be to allow a masking that allowed for optional characters (so that the "0" wouldn't be needed for the dates 1-9) but there doesn't seem to be one.
Thanks in advance!

Since there was no clear way to ensure that the date formatting was correct prior to exporting, we're going to get the respondants to use drop downs to ensure the formatting is correct. Not the most convenient for the users though as they're accustomed to being able to type in the values to select it (e.g., for the date of 23 they would expect to enter 2 then 3 for 23) based on other applications, but the Adobe pull downs don't "group" what's been entered (e.g., 2 then 3 will select 30, not 23) and so it will take them a bit to get used to it. I still can't believe that Adobe wouldn't simply export what it's been formatted to though... after all that's what we set the form up for.

Incorrect data in ODS

Hi All,
we are loading data from one ODS to another with delta processes.The second ODS got some incorrect data Populated.After that I did a full repair load selectively for one record only from first ODS to another and it went fine.But when I am loading by full repair load the records for entire company code,one particular key figure is getting doubled for most of the records.I've checked there is no problem with the start routine.
Please let me know if I am missing anything in full repair load.
Thanks in advance.

Hi,
In sequence to this post,now i am getting a differnt and strange error.
the data gets loaded from ODS1(0FIA_DS11) to ODS2(0FIA_DS12).
But for some asset main nos the CACQ_VL_YR and TACQ_VL_YR does not get populated.
WE have a start routine in between.The start routine poplualtes the CACQ_VL_YR .TACQ_VL_YR is polulated with ACQ_VAL_TR.
the routine is as follows:
DATA: lt_trans LIKE table of DATA_PACKAGE,
         wa_trans LIKE LINE OF lt_trans.
LOOP AT DATA_PACKAGE.
    CLEAR wa_trans.
Nicht-Werfelder 1:1 übernehmen
    MOVE: DATA_PACKAGE-currency   TO wa_trans-currency ,
          DATA_PACKAGE-comp_code TO wa_trans-comp_code ,
          DATA_PACKAGE-/BIC/ZASS_MAIN TO wa_trans-/BIC/ZASS_MAIN ,
          DATA_PACKAGE-/BIC/Zdep_area TO wa_trans-/BIC/Zdep_area ,
          DATA_PACKAGE-fiscyear   TO wa_trans-fiscyear,
          DATA_PACKAGE-fiscvarnt TO wa_trans-fiscvarnt.
Wertfelder mit identischer Übertragungslogik bei PLN und ***
    MOVE:
    DATA_PACKAGE-vaw_odp_tr TO wa_trans-vaw_odp_tr,
    DATA_PACKAGE-vaw_sdp_tr TO wa_trans-vaw_sdp_tr,
    DATA_PACKAGE-vaw_udp_tr TO wa_trans-vaw_udp_tr,
    DATA_PACKAGE-vaw_avr_tr TO wa_trans-vaw_avr_tr,
    DATA_PACKAGE-va_rapc_tr TO wa_trans-va_rapc_tr,
    DATA_PACKAGE-va_rodp_tr TO wa_trans-va_rodp_tr,
    DATA_PACKAGE-va_invs_tr TO wa_trans-va_invs_tr.
    CASE DATA_PACKAGE-transtype.
      WHEN '***'.
    Wertfelder kumuliert
        MOVE:
        DATA_PACKAGE-acq_val_tr TO wa_trans-cacq_vl_yr,
        DATA_PACKAGE-inv_sup_tr TO wa_trans-cinv_gr_yr,
        DATA_PACKAGE-ord_dep_tr TO wa_trans-cor_dep_yr,
        DATA_PACKAGE-spc_dep_tr TO wa_trans-csp_dep_yr,
        DATA_PACKAGE-upl_dep_tr TO wa_trans-cup_dep_yr,
        DATA_PACKAGE-res_trf_tr TO wa_trans-cres_tr_yr,
        DATA_PACKAGE-interst_tr TO wa_trans-cinter_yr,
        DATA_PACKAGE-reval_tr   TO wa_trans-crev_rv_yr,
        DATA_PACKAGE-rev_odp_tr TO wa_trans-crev_od_yr.
        COLLECT wa_trans INTO lt_trans.
    Wertfelder geplant
      WHEN 'PLN'.
        MOVE:
        DATA_PACKAGE-acq_val_tr TO wa_trans-acq_val_tr,
        DATA_PACKAGE-inv_sup_tr TO wa_trans-inv_sup_tr,
        DATA_PACKAGE-ord_dep_tr TO wa_trans-plo_dep_yr,
        DATA_PACKAGE-spc_dep_tr TO wa_trans-pls_dep_yr,
        DATA_PACKAGE-upl_dep_tr TO wa_trans-upl_dep_yr,
        DATA_PACKAGE-res_trf_tr TO wa_trans-pln_avr_yr,
        DATA_PACKAGE-interst_tr TO wa_trans-pln_int_yr,
        DATA_PACKAGE-reval_tr   TO wa_trans-prev_rv_yr,
        DATA_PACKAGE-rev_odp_tr TO wa_trans-prev_aodyr.
        COLLECT wa_trans INTO lt_trans.
   'echte' Bewegungen ignorieren.
      WHEN OTHERS.
    ENDCASE.
ENDLOOP.
DATA_PACKAGE[] = lt_trans[].
if abort is not equal zero, the update process will be canceled
ABORT = 0.
Can anyone throw some light on this?
Regards,
Dhanya.

How to stored data after clicking checkbox save in database table

TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
      mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
      t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
        w_comm    TYPE slis_formname,
        w_status TYPE slis_formname,
        x_layout TYPE slis_layout_alv,
        t_event    TYPE slis_t_event,
        t_fieldcat TYPE slis_t_fieldcat_alv,
        t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
        1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
        4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
        9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
    14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program       = sy-repid
    it_fieldcat              = t_fieldcat
    is_layout                = x_layout
    it_sort                  = t_sort
    i_callback_pf_status_set = w_status
    i_callback_user_command = w_comm
    i_save                   = 'X'
    it_events                = t_event
    i_grid_title             = w_title
TABLES
    t_outtab                 = t_data
EXCEPTIONS
    program_error            = 1
    OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
      t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
        x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
      t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
    wa_fieldcat-ref_tabname = p_ref_tabname.
    IF p_ref_fieldname EQ space.
      wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
    ELSE.
      wa_fieldcat-ref_fieldname =   p_ref_fieldname.
    ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
    wa_fieldcat-INPUT     = 'X'.
    wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
=========================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    i_logo             = 'XXXXX'
    it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
      rs_selfield TYPE slis_selfield.
ENDFORM.                    "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.

hi!,
use MODIFY to update data into the data base table.
regards
anjali

Getting Training and Event Management Data using IT0031

Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Multi Mapping : How to get Message count after splitting

Hi all,
I am following below blog.
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Can any body please tell me how to get the count of messages generated after splitting in the message mapping.. I have created the message data type but not aware what is needed to be done.
Thanks and best regards,
Kulwant Singh

Multi mappings r done in order to split the messages to the number of messages required by the user. So for 1:N mapping, the details about "N" is based on ur requirement. So its not like - when u split, any number of message could get created. The count would be dependent on u.
Regards,
Prateek

How to save data after clicking checkbox stored in databasetable

TYPE-pools: slis.
tables:mkpf,mseg,mard.
TYPES: BEGIN OF tp_data,
      mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
__mark,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
      t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
        w_comm    TYPE slis_formname,
        w_status TYPE slis_formname,
        x_layout TYPE slis_layout_alv,
        t_event    TYPE slis_t_event,
        t_fieldcat TYPE slis_t_fieldcat_alv,
        t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
        1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
        4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
        6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
        7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
        9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
        14 '__MARK' 'XFELD' space space space 'Select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'LIFNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program       = sy-repid
    it_fieldcat              = t_fieldcat
    is_layout                = x_layout
    it_sort                  = t_sort
    i_callback_pf_status_set = w_status
    i_callback_user_command = w_comm
    i_save                   = 'X'
    it_events                = t_event
    i_grid_title             = w_title
TABLES
    t_outtab                 = t_data
EXCEPTIONS
    program_error            = 1
    OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
      t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
        x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
      t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
    wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
    wa_fieldcat-ref_tabname = p_ref_tabname.
    IF p_ref_fieldname EQ space.
      wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
    ELSE.
      wa_fieldcat-ref_fieldname =   p_ref_fieldname.
    ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
    wa_fieldcat-INPUT     = 'X'.
    wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
=========================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    i_logo             = 'XXXXX'
    it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
      rs_selfield TYPE slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
   WHEN '&IC1'.
     Set your "double click action" response here.
     Example code: Create and display a status message.
     DATA: w_msg TYPE string,
           w_row(4) TYPE n.
     w_row = rs_selfield-tabindex.
     CONCATENATE 'You have clicked row' w_row
                 'field' rs_s lfield-fieldname
                 'with value' rs_selfield-value
                 INTO w_msg SEPARATED BY space.
     MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
ENDFORM.                    "user_command
this is mycode,mblnr, matnr and checkbox both field had created in database table
then save data after clicking checkbox data stored in database table,and next clickin checkboxes are no change. this my requirment.
plz send me code .

Try this
In user_command form...
LOOP AT IT_DATA.
IF CHECKBOX __MARK EQ 'X'.
write logic wht u want....
ENDIF.
ENDLOOP.

IPhoto events view broken after import, images missing

I'm running the latest iPhoto on a 10.8.2 Retina MacBook Pro and experience some strange import problems since the end of last month.
My library holds more then 26.000 images right now and whenever I try to import some new images by dragging them from Finder to the iPhoto library the images (and videos) get imported... but when I try to view the event afterwards it doesn't open and the scrolling of the complete events view is broken. The scrollbar moves but thumbnails of events don't! I'm not able to use the events view anymore after a try to open such broken event.
When I use the regular photos view (the 2nd item in the left menu) I can see and use these new images... until I quit and restart iPhoto. Afterwards many images are missing – see http://cl.ly/JrjF for an example. I can delete those broken events... but not empty the trash afterwards. It just hangs while purging all entries.
Has anyone experienced this already?
I'm importing iPhone images uploaded to the DropBox "Camera Uploads" folder. But I can't believe it has to do with anything related to this.
I've also disabled the Photostream feature (not the shared ones) in iPhoto because I got tired of splitted events due to Photostream missing some images now and then. Maybe it has to do with that disabled feature. I'll try to reenable it after restoring my 5 days old backup (120GB) a second time now.
Thanks for your help... let's hope I can solve this.

This sounds like a damaged database.
Try this test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it's not then back to your main Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Events - Incorrect Dates after split

Similar Messages

Maybe you are looking for