Events Issues with Description
Morning.
I have to report an issue with the "events" section of iPhoto. The text under the images is both unclear and overlapping the events thumbnails. The desciption isnt log either.
Has anyone else managed to unravel this issue?
Any feedback appreciated?
To edit event titles correctly make sure you have HelveticaNeue installed on your system. HelveticaNeue.dfont is what worked for me. Restart iPhoto after installing the font.
Similar Messages
-
Custom Event - Issues with triggering
Hi Experts,
I've developed one workflow for travel management. The flow is as below.
1. Whenever expense report is created, workflow will get triggered
2. If the expense report requires receipts, workflow will be waiting for the receipts attachment. After attaching the receipts workflow will move further for approval process. For this I've created one custom event, which will be triggered from enhance spot (OA_BADI_LINK) implementation when receipts are attached
3. I'm using the custom event created and wait step to hold the workflow till the event get triggered
4. If receipts are required and not attached for 2 days, workflow will be terminated
It was working fine in development server. After transporting the all related objects to testing server, in testing server the workflow was not moving further even after attaching the receipts. I wanted to check whether the custom event is getting triggered or not, while attaching the receipts. For this, I've requested admin team to switch on the event trace (SWELS) in testing server. After switching on the event trace, my workflow is working fine. I mean, the workflow is moving further whenever receipts are attached.
I'm with no clue, why it was not working before activating the event trace and why it is working after that.
Can any one help me in finding out the cause?
Thanks in Advance,
Siva Sankar.Hi Shital,
Thanks for ur reply.
Standard event that is maintained in SWE2 was getting triggered and workflow was getting started. But, the custom event that is getting triggered from enhancement was not working properly.
What settings admin do using SWEQADM tcode?
Thanks,
Siva Sankar. -
Issue with applying Event Action filters
Dear friends,
A general question on Event Action filters. There is a signature with sig ID 6257.
The following is the event action filter configuration:
service event-action-rules rules0
filters edit DHCP
signature-id-range 6257
subsignature-id-range 0
attacker-address-range 172.20.20.10,172.20.20.11
actions-to-remove produce-alert
filter-item-status Enabled
stop-on-match True
os-relevance not-relevant
exit
Even though a valid DHCP offer is being given by the DHCP server, this alert is getting fired.
We have even excluded the IP's of the DHCP Servers - 172.20.20.10 and 172.20.20.11 from the Attacker Address range parameter in the signature but still this alert gets fired.
evIdsAlert: eventId=1204853641442197329 vendor=Cisco severity=low
originator:
hostId: IDSM2Core1
appName: sensorApp
appInstanceId: 592
time: April 7, 2008 5:46:48 AM UTC offset=180 timeZone=1
signature: description=DHCP Client DoS id=6257 version=S316
subsigId: 0
sigDetails: Server Offered a Malicious IP Address
marsCategory: DoS/Host
interfaceGroup: vs0
vlan: 200
participants:
attacker:
addr: 172.20.20.10 locality=OUT
port: 0
target:
addr: 10.1.1.78 locality=OUT
port: 0
os: idSource=unknown type=unknown relevance=unknown
summary: 4 final=true initialAlert=1204853641442197267 summaryType=Regular
alertDetails: Regular Summary: 4 events this interval ;
riskRatingValue: 25 targetValueRating=medium
threatRatingValue: 25
interface: ge0_7
protocol: udp
Looking forward to your kind help and advise on this.
Thanks a lot
GautamSome things to check:
1) Is the filter in the active list? Filters can be enabled or disabled, but they can also be active ro inactive. You've only show a part of your configuration so I can't tell if the filter is part of the active list.
2) Are there actions other than produce-alert for the signature? Or is an event action override adding other actions?
Produce-alert is not the only action that can cause an alert to be generated. The produce-verbose-alert, request-snmp-trap, log-attacker-packets, log-victim-packet, and log-pair-packets will also cause alerts to be generated. Modify the filter to also remove these actions.
3) The alert you've shown is a Summary Alert. There may be an issue with Summarization and the Filters. Try modifying the signature to set it to FireAll with no summarization.
4) If you have multiple filters then check the order of the filters. If the event is matching an earlier filter where the stop-on-match is set to True, then it will not check the event against this filter. Either move this filter up higher in the filter list, or change earlier filters to be "stop-on-match false".
5) Also check to see if you are running the latest 5.1(7) or 6.0(4) Service pack. If running earlier 5.1 or 6.0 versions you might be hitting a bug that could have already been fixed.
If none of the above help, then contact the TAC. It could be that you may have foung a bug that the sensor development team is unaware of.
To help in identifying the problem take a packet capture of the packets from 172.20.20.10 for several minutes around the time when the sensor is generating these alerts.
This way the team can both check if the signature is firing correctly, and if the filters are working correctly for that signature. -
Issue with the pVal.BeforeAction in Item_Pressed event
Hi all,
I am facing an issue with the <b>pVal.BeforeAction</b> in the <b>Item Pressed event</b>.
In delivery notes, When I press the Add button, i am getting the control, which is passing through both of the if blocks [<b>if (pval.BeforeAction=True)</b>block and <b> if(pVal.BeforeAction=False)</b>].
But
When I try the delivery using <b>Pick and Pack Manager</b> form with in the Inventory Menu, I am getting the same Delivery form in Add Mode. When I click the Add button in the form, the control is passing through the <b>if(pCal.BeforeAction=true)</b> block successfully, but after that, the form closes and it never comes to the <b>if(pVal.BeforeAction=false)</b> block.
I need to run the codes, what i have written in the second if block, in this case also.
Is it possible?
Please help me to solve this issues.Hi,
It's a known bug. As Rasmus said try the SBO2005A SP01 FormDataAdd Event.
Regards,
Ian -
Issue with Event.EXITING in AIR 2.5
I am facing an issue with the Exiting event in AIR when creating my application using Flash builder. The exiting event does not function on windows shutdown... howevere if I click the 'X' button to exit the app it works perfectly fine....is there a bug in the exiting event...
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
creationComplete="init()"
styleName="plain" width="100%" height="100%">
<fx:Script>
<![CDATA[
import flash.events.Event;
import mx.controls.Alert;
protected function init():void
trace("handle exit");
NativeApplication.nativeApplication.addEventListener(Event.EXITING,handleExiting);
public function handleExiting(e:Event):void
Alert.show("Exit!");
trace("Handle Exit!!");
var f:File = File.desktopDirectory;
f = f.resolvePath("air-exit-test.txt");
var stream:FileStream = new FileStream();
stream.open(f,FileMode.WRITE);
stream.writeUTFBytes(ta.text);
stream.close();
]]>
</fx:Script>
<s:Panel width="100%" height="100%" title="Exit Event on Shutdown">
<s:HGroup width="95%" left="10" top="10">
<s:Label text="Enter text to save upon shutdown:"/>
<s:TextArea id="ta" height="200"/>
<s:Label width="95%" verticalAlign="justify" color="#323232" horizontalCenter="0" bottom="20"
text="The Exiting event can now be handled upon the user shutting down the OS giving you a chance to handle any unsaved data in your application upon shutdown. If you run this code in an AIR application and shutdown your OS, it will still save the data that you have entered in Text Area to air-exit-test.txt in your Desktop directory."/>
</s:HGroup>
</s:Panel>
</s:WindowedApplication>This bug has not been fixed as of AIR 2.7, I don't have a date/version I can give you when this will be addressed.
However, I would recommend adding a new bug to bugbase.adobe.com and include the sample project and a reference to our internal bug number. The public bug will then be linked to our internal bug and you'll be able to see updates as the state and status are changed. If you post back with the public bug URL, others effected can cast their votes and add notes as well.
Thanks,
Chris -
Issue with events not propagating when selecting toolbar items
Hey All,
I'm on OS X Lion using CS6 beta and observing events in Photoshop form an outside application using Cocoa's NSEvent#addGlobalMonitorForEventsMatchingMask.
It seems Photoshop is stoping the propogation of some events coming out of selection of toolbar items. Here's the issue:
There are two ways to select the Pencil tool from the toolbar. (Method A) I can click the Paintbrush, holding down for a second and releasing, then mouse move to the Pencil and click, OR (Method B) I can mouse down the on the Paintbrush and drag the mouse to the Pencil.
If I use Method A I get what seems to be every event associated with the interaction, BUT If I use Method B Photoshop seems to stop the propogation of a lot of drag events.
Are there any experts out there that have an knowledge of why this is, or if there are any known work arounds?
Regards,
Ned
ps This is also an isue in Photoshop 5Ned, this is a bit over my head, but FYI (and your troubleshooting research), there are other methods to get alternate tools: ALT+click to cycle them, CMD/right-click to get the flyout, and Shift+Tool shortcut (unless you changed the setting in preferences)
BTW, method B is not the same as A? The only difference is that in A, there is a release, then a move to target area, then another click, while in B, we have a hold, then a move to the target area, then release. -
How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what. When you have several thousand photos it is difficult to determined what is what.
Why does iPhoto have the ability to put photos in events and to give them descriptions if it doesn't transfer this info with the photo. I want to back my photos up to an external drive.The simplest way to achieve what you want is to back up the iPhoto Library. That will get everything.
You sem to be exporting from iPhoto to the Finder. The Finder does not have the same organisation capabilities as iPhoto. If you're going to do that you need to understand some of the differences between the two.
Event Name will become Folder Name.
'Description Name' I guess is the Title you give the Photo
Jpeg Number is the File Name assigned by your camera.
So: File -> Export
Set your Kind to Jpeg
Select your preferred Quality
Check the Boxes at 'Titles and Descriptions' and Location Information
Under FIlename select 'Use Title'
Click on Export. In the Next Window choose a New Folder as your export destination and then Name that as you prefer
Regards
TD -
All
I am attempting to build a simple orchestration that is kicked off via the TaskCreated event. As of now, I don't care about using a filter - I just want the orchestration to run any time the TaskCreated event is fired.
I've created such an orchestration. First I placed a start point TaskCreated event on the canvas. I followed this with a SetValue operation that assigns some random sentence to a String variable. I've saved and activated this service.
Now, when I go into Workspace and launch a workflow, I can see in my log that the TaskCreated event seems to be firing properly but that something is definitely wrong. The following errors can be found in the server.log:
2009-02-20 17:21:55,491 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterLocal.doSupports(c om.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transacti onCallback) throws com.adobe.idp.dsc.DSCException:
com.adobe.workflow.template.document.TemplateNodeNotFoundException: Template object: STRT_ER1235167537085 not found.
I have Recording and Playback set for my orchestration with the event and a new instance of this orchestration is being fired whenever I create a task but it can't seem to actually make it past the event start point because of the above error.
Any ideas?I am also experiencing many errors that are filling up the log file and making it difficult to find what I am looking for in the log. The culprit is:
2010-11-29 11:21:21,151 INFO (STDOUT:206) - 2010-11-29 11:21:21,150 ERROR(org.jboss.ejb.plugins.jms.JMSContainerInvoker:1462) - Exception in JMSCI message listener
javax.ejb.TransactionRolledbackLocalException: RuntimeException
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:262)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:109)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:399)
at org.jboss.ejb.Container.invoke(Container.java:960)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker.invoke(JMSContainerInvoker.java:1139)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker$MessageListenerImpl.onMessage(JMSContainerI nvoker.java:1452)
at org.jboss.jms.asf.StdServerSession.onMessage(StdServerSession.java:266)
at org.jboss.mq.SpyMessageConsumer.sessionConsumerProcessMessage(SpyMessageConsumer.java:891 )
at org.jboss.mq.SpyMessageConsumer.addMessage(SpyMessageConsumer.java:170)
at org.jboss.mq.SpySession.run(SpySession.java:323)
at org.jboss.jms.asf.StdServerSession.run(StdServerSession.java:194)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:761)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.ejb.EJBException: RuntimeException
at com.adobe.workflow.engine.ProcessCommandControllerBean.doOnMessage(ProcessCommandControll erBean.java:206)
at com.adobe.workflow.engine.ProcessCommandControllerBean.onMessage(ProcessCommandController Bean.java:99)
at sun.reflect.GeneratedMethodAccessor352.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.j ava:492)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterc eptor.java:116)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
... 15 more
Caused by: javax.ejb.EJBException: RuntimeException
at org.jboss.ejb.plugins.LogInterceptor.handleException(LogInterceptor.java:417)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:209)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
at $Proxy214.asyncTerminateActionCommand(Unknown Source)
at com.adobe.workflow.engine.ProcessCommandControllerBean.doOnMessage(ProcessCommandControll erBean.java:177)
... 24 more
Caused by: com.adobe.workflow.template.document.TemplateNodeNotFoundException: Template object: A1284756038469 not found.
at com.adobe.workflow.engine.ProcessEngineBMTBean.asyncTerminateActionCommand(ProcessEngineB MTBean.java:1028)
at sun.reflect.GeneratedMethodAccessor354.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 73)
at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
... 31 more
Caused by: com.adobe.workflow.template.document.TemplateNodeNotFoundException: Template object: A1284756038469 not found.
at com.adobe.workflow.template.document.DefaultAbstractTemplateDocument.getTemplateNodeById( DefaultAbstractTemplateDocument.java:84)
at com.adobe.workflow.engine.ProcessEngineBMTBean.asyncTerminateActionCommand(ProcessEngineB MTBean.java:998)
... 44 more
Has anyone found a solution beyond scrapping (I am assuming that is intent of the reference to scraping) the database. We don't have that kind of time now.
For your issue with reporting assignments in the log file, have you tried to read the adobe.tb_assignment joined with the adobe.EDCPRINCIPALENTITY tables for that information? LiveCycle is tracking and storing that information already. -
I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?
adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac -
Issue with xfa.event.change in XFA 3.3
HI all
I've found an issue with the way that XFA 3.3 processes the script below on a change event when a user paste's more than 1 character to a textfield.
var sChange = xfa.event.change;
if((sChange.length>1)){
app.alert("Bad User\nCopy and paste has been disabled for this field");
//discard the change
xfa.event.change = "";
in XFA 3.0 the alert is sent and change is removed, in XFA 3.3 the alert is sent but the change persists.
Any Ideas?Hi Mark,
Unfortunately thats not possible as I'm using Flash Fields with data being passed between the PDF and the Flex app which only works in XFA3.3, let me know when its fixed.
Kind Regards
Kevin Mortimer
Solutions Archtect
Avoka -
I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphoneThis sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.
-
Issue with TextArea resize event
Hi,
In the following
sample there
is a button and a textarea in a VDivideBox. If you move the
divider, the Textarea is resized and in its resize event I change
the fonts size. It works very well except in one case: If the
Textarea is given the focus and then you try to resize it by moving
the divider, then all the text goes blank ! I've debugged it and
everything looks fine, so I can't figure out what's going on...
I'm using Flex 3. To see the code, right click and View
Source.
Thanks for helping.Hello,
You say:
"The event trace shows that INPUTFINISHED got triggered. The technical workflow log also shows a record of the terminating event - but still the task does not get finished - the task still remains INPROCESS and does not get COMPLETED."
I would concentrate on fixing this. If an event is being created wth the proper key (check that) then the workflow should pick it up. You say you can even see it in the workflow log? Are you using a wait step, or have you set the event as a terminating event for the whole workflow? Try generating the event manually (with SWUE) to figure out what the problem is. This should work. Check the workflow log for errors.
regards
Rick Bakker
Hanabi Technology -
Hi-
Looked thru the thread related to my questions and found nothing that applies yet.
Example:
http://social.technet.microsoft.com/Forums/en-US/4e4472b9-8e6f-4fdc-a287-1cc8c0f6de09/windows-2008-r2-backup-fails-with-event-521-error-code-2155348001?forum=windowsbackup
http://social.technet.microsoft.com/Forums/en-US/e8c910f7-f0dd-4613-beae-b98894fb6f23/windows-server-2008-std-backup-fails-constantly-with-error-code-2155348001?forum=windowsbackup
Here are details of the issues....
Backup - OS error - system image:
External disk - USB
Mon - Fri @ 6PM.
Windows SystemState
OS(C:)
Last backup failure...
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
[Critical error WINIMAGE_UNABLE_VSS] Unable to create VSS snapshot
- Additional information: Refer to the log for more details
- Troubleshooting link:
http://kb.backupassist.com/errormap.php?BA2512
The backup operation stopped before completing.
Detailed error: ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-12-08-2014_04-41-00.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-12-08-2014_04-41-00.log
NOTE:
The errors logs are not there?
Windows Backup timed-out before the shared protection point was created.
ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Event Viewer Log:
Sequence of Events...
1.
The Block Level Backup Engine service has successfully started.
2.
Backup operation that started...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 4:51:06 AM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The backup operation that started at '?2014?-?08?-?12T09:41:00.492000000Z' has failed because the
Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed
with following error code '2155348001'.
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
--> Suggestion are to check Virus scanner or consult DPM forum...
3.
OS Job failed with errors...( Backup Assist is 3rd party backup - wrapper round Wbadmin/Win Backup)
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:51:51 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job OS backup failed with errors.
Critical error: Unable to create VSS snapshot
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
4.
Backup Assist reports via Win backup - Snapshot in progress
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:52:20 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job Data backup failed with errors.
Ultra critical error: Volume Shadow Copy Error 0x80042316 - snapshot set in progress
Destination: Local directory
Start time: 8/12/2014 4:52:10 AM
End time: 8/12/2014 4:52:12 AM
Duration: 00:00:02.7300000
5.
The Block Level Backup Engine service has stopped.
6.
Later...we tried manually stopping VSS and SWPRV services - only VSS had the issue.
WBengine was not running...
C:\>sc stop swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query wbengine
SERVICE_NAME: wbengine
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query vss
SERVICE_NAME: vss
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc stop vss
[SC] ControlService FAILED 1061:
The service cannot accept control messages at this time.
Log Name: Application
Source: VSS
Date: 8/12/2014 9:20:33 AM
Event ID: 8225
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The VSS service is shutting down due to shutdown event from the Service Control Manager.
7.
VSS still having issues here...not stopping!
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service information:
The COM Server with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and name IVssCoordinatorEx2 cannot be started.
Most likely the CPU is under heavy load. [0x80080005, Server execution failed]
8.
Not sure why this is started again?
Plus a DCOM timeout...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:31:13 AM
Event ID: 753
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has successfully started.
Event Xml:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 8/12/2014 9:31:43 AM
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The server {E579AB5F-1CC4-44B4-BED9-DE0991FF0623} did not register with DCOM within the required timeout.
9.
Lots more errors about VSS...repeating Event ID's 11 and 8193...
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 8193
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80080005, Server execution failed
. Operation:
Instantiating VSS server
10.
Then, finally stopping again...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:51:13 AM
Event ID: 754
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has stopped.
11.
And still repeating 11 & 8193 at this point...as we write up this post.
12.
This was suggested by the Backup Assist - software vendor....
A.)
...for 0x81080101:
"ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try again this operation."
If you receive the above error in your report, we have recently found a registry key which
contains the timeout value set by Microsoft for VSS and found that you can edit this to extend it.
To get to the registry key, open Regedit (Start > Run > Regedit) and browse to:
"HKLM\Software\\Microsoft\\Windows NT\\CurrentVersion\\SPP\\CreateTimeout".
Change value to 1200000 (2*10*60*1000 = 20 mins).
The default for the timeout period is 10 mins so hopefully doubling this will give enough time to
complete the snapshot.
If this isn't present, you'll need to manually enter the registry key. It's a DWORD 32-bit key.
--> NOTE: HAve not done this yet.
B.)
And for 0x80080005...
http://support.microsoft.com/kb/870655/en-gb
Our server does have high CPU load at times...
13.
Another post from technet mentions system volume size - here is our layout below:
A.)
OS/system Disk...
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 278 GB 0 B (System Vol = C: Drive - OS w/ Programs and batch jobs)
Disk 1 Online 2791 GB 0 B * (Data drive - DFS, rsync,etc. run on D: Drive)
Disk 2 Online 1863 GB 0 B (USB 2/3.0 - Enclosure w/ SATA disk = 2GB formatted w/ NTFS.)
DISKPART> detail disk
DELL PERC H710P SCSI Disk Device
Disk ID: CA0DEEA5
Type : RAID
Status : Online
Path : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0100)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 1 RECOVERY NTFS Partition 3072 MB Healthy System
Volume 2 C OS NTFS Partition 275 GB Healthy Boot
B.)
Backup disk...
ST320006 41AS USB Device
Disk ID: 801AF48C
Type : USB
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 4 F BACKUPS NTFS Partition 1863 GB Healthy
C.)
NOTE:
Also on disk 0(system Disk) - we have a small OEM partition = 39MB and a Recovery Partition = 3GB.
D.)
Issues with WBAdmin now...
C:\>wbadmin get disks
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x80042302)
A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
14.
Ran "Check-Disk" -no errors...
C:\>chkdsk
The type of the file system is NTFS.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume label is OS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
116224 file records processed.
File verification completed.
654 large file records processed.
0 bad file records processed.
0 EA records processed.
76 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
156676 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
116224 file SDs/SIDs processed.
Security descriptor verification completed.
20227 data files processed.
CHKDSK is verifying Usn Journal...
35628352 USN bytes processed.
Usn Journal verification completed.
Windows has checked the file system and found no problems.
289233919 KB total disk space.
100241492 KB in 85477 files.
57380 KB in 20228 indexes.
0 KB in bad sectors.
226627 KB in use by the system.
65536 KB occupied by the log file.
188708420 KB available on disk.
4096 bytes in each allocation unit.
72308479 total allocation units on disk.
47177105 allocation units available on disk.
15.
There are no backup error logs here - only .etl files...
C:\Windows\Logs\WindowsServerBackup\
Wbadmin.1.etl = 9:42AM on 8/12
Wbadmin.2.etl = 4:51AM on 8/12
Per windows Win troubleshooting:
http://technet.microsoft.com/en-us/library/ee692290(WS.10).aspx
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
--> Related to Windows backup and not VSS?
2155348001 - 0x80780021 - Windows Backup timed-out before the shared protection point was created.
Should we run the "FIXVSS08.BAT" script - restarts services and re-registers DLL's - does this ever help?
Will this server need a reboot since VSS is in a state and we can't even test backups?
Is there a tool we can use to debug VSS or troubleshoot or OS backups further?
MSReport/Diag, VSS debugging, or another way of helping fix our OS(SystemState/C: drive) backup issues?
Any help is greatly appreciated - thx.
-SP
Scot PichelmanHi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected] -
I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC
I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC. The issue has been reported in Japanese by Microsoft. The translation is:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be
typographical errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected. In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
of their customers know about the problem instead of just one country. Hopefully the original bulletin will be updated with this known issue.PPoj,
Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future. -
<UPDATE 8/3/09> Nearly all of the issues mentioned below are still present in the MSI installer for 11.5.6.606 - the only one that Adobe have fixed is the one where the MozillaPlugins 'Version' value is left blank by the MSI by default - this is now created correctly, but all of the other issues remain.
Personally I have given up trying to use this MSI package to deploy Shockwave until Adobe get their act together - instead I am using a wrapper to wrap the Shockwave executable inside an MSI file and deploying it that way, although this is not ideal.
I have created an MST file which will fix the MSI installer for version 11.5.6.606, which I will post to another forum shortly, but I am not planning to keep it updated for future versions as I don't really have the time.
Hi,
I've tried submitting the following via the Adobe Customer Support portal and via the Feature Request/Bug Report form, but the first told me that I needed to 'get in touch with Adobe Enterprise Solutions team for getting help' and that 'to get in touch with them you have to purchase a contract', and the second resulted in a bounced email address saying that '[email protected]' 'does not exist at the organization this message was sent to'.
In short, attempting to contact Adobe to report issues with their installers sucks, and I am posting this here in the vain hope that someone at Adobe might read this message and possibly forward it to the relevant people. Some of the issues have already been reported here on this forum, but some of them are new, and I guess others might be interested in them too.
Hi,
I would like to report some issues with most recent version of the Shockwave installer, available in MSI format from the following location:
http://www.adobe.com/cfusion/entitlement/index.cfm?k=4E6102EB-DA7C-2795-C744826EFDE2A098&l oc=en_us
This is the installer for version 11.5.2.602, with a digital signature dated 06 November 2009 10:52:21
When downloading this version of the installer in Windows Installer (MSI) format, the following issues manifest themselves, most of which are not a problem when using the Full EXE installer available from the same page.
First of all, when installing the MSI file using Group Policy Software Deployment, if you log on to the computer after the MSI file has been deployed and view a web page that contains Shockwave content, you receive the following errors in the Windows event log:
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1004
Date: 16/12/2009
Time: 16:51:23
User: CRGS\DefaultUser
Computer: ITO01
Description:
Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_', component '{E89F323D-7BDB-46E1-A0FD-6227821F94EA}' failed. The resource 'C:\WINDOWS\system32\config\systemprofile\Application Data\Adobe\' does not exist.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1001
Date: 16/12/2009
Time: 16:51:23
User: CRGS\DefaultUser
Computer: ITO01
Description:
Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_' failed during request for component '{3D3697FC-DB90-46D8-9ED4-5D54B4901F62}'
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
If you are logged on as an Administrator, then the computer will immediately attempt to 'repair' the Adobe Shockwave Player installation in order to create the missing folder 'C:\WINDOWS\system32\config\systemprofile\Application Data\Adobe\', which leads to a significant delay in the initialization of the Shockwave content on the web page. If you are logged on as a non-Administrator, the errors will still appear, but the 'repair' operation will fail due to insufficient permissions to create the above folder.
I have done some testing and it seems as if this problem can be easily resolved by removing the code from the installer which tells it to create an empty folder in the 'Application Data' folder called 'Adobe\Shockwave Player 11'. This code seems to be entirely unnecessary, as no files are created inside this folder as part of the installation, and I have removed it successfully from my own copy of the MSI without it causing any issues. I have found some other people who are also experiencing this problem in the following forum post:
http://forums.adobe.com/message/2379350 (post number 8)
and since this 'repair' operation causes all customised registry settings to be reset back to defaults as part of the repair, it would be very helpful if this 'feature' could be removed from future versions.
Secondly, there are a number of registry keys which are created incorrectly by the MSI installer when the above 'repair' operation takes place, which need to be corrected to prevent further issues from occurring:
Under '[HKEY_CLASSES_ROOT\CLSID\{1F3CB77D-D339-49e0-B8E4-FECD6D6F8CB8}\LocalServer32]', the 'default' value is set to the following by the MSI:
C:\WINDOWS\system32\Adobe\SHOCKW~1\SWHELP~1.EXE"
(Please note that there is a double quotation mark at the end of the value, but not at the beginning)
Whereas the executable installer creates the value as follows:
"C:\WINDOWS\system32\Adobe\Shockwave 11\SwHelper_1152602.exe"
According to a forum post (http://forums.adobe.com/message/2379350, post 15), this causes DCOM errors when Shockwave is launched, if the MSI 'repair' has taken place as described above.
The above registry value should be set to the following in the installer's Registry table:
"[INSTALLDIR]Shockwave 11\SwHelper_1152602.exe"
so that the MSI installer works the same as the executable one.
Under '[HKEY_CLASSES_ROOT\TypeLib\{6EF568F4-D437-4466-AA63-A3645136D93E}\1.0\0\win32]', the 'default' value is set to the following by the MSI:
Adobe\SHOCKW~1\SWHELP~1.EXE
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Adobe\Shockwave 11\SwHelper_1152602.exe
Also, under '[HKEY_CLASSES_ROOT\TypeLib\{6EF568F4-D437-4466-AA63-A3645136D93E}\1.0\HELPDIR]', the 'default' value is set to the following by the MSI:
Adobe\SHOCKW~1\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Adobe\Shockwave 11\
Once again, the above registry values should be set to the following in the installer's Registry table to fix the issue:
[SystemFolder]Adobe\Shockwave 11\SwHelper_1152602.exe
[SystemFolder]Adobe\Shockwave 11\
Under '[HKEY_CLASSES_ROOT\CLSID\{166B1BCA-3F9C-11CF-8075-444553540000}]', the 'default' value is NOT SET by the MSI by default:
Whereas the executable installer creates the value as follows:
Shockwave ActiveX Control
This value should be set in the installer's Registry table to fix the issue.
Under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\common]', the 'default' value is set to the following by the MSI:
Macromed\common\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Macromed\common\
Also, under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\coreplayer]', the 'default' value is set to the following by the MSI:
Macromed\Shockwave 10\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Macromed\Shockwave 10\
Also, under '[HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\Shockwave 10\location\coreplayerxtras]', the 'default' value is set to the following by the MSI:
Macromed\Shockwave 10\xtras\
Whereas the executable installer creates the value as follows:
C:\WINDOWS\system32\Macromed\Shockwave 10\xtras\
The above registry values should be set to the following in the installer's Registry table to fix the issue:
[SystemFolder]Macromed\common\
[SystemFolder]Macromed\Shockwave 10\
[SystemFolder]Macromed\Shockwave 10\xtras\
The MSI installer does not create '[HKEY_CLASSES_ROOT\.dcr]', '[HKEY_CLASSES_ROOT\.dir]', or '[HKEY_CLASSES_ROOT\.dxr]'
Wherease the executable installer creates all three of these keys and populates them all with the following 'default' value:
"Content Type"="application/x-director"
These keys and values should be set in the installer's Registry table to fix the issue.
The MSI installer creates a value under the following registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponets\SwDi r]
However this registry key is obviously misspelt (missing an 'n' in 'OptionalComponets') and should read as follows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OptionalComponents\SwD ir]
This key name needs to be changed in the installer's Registry table to fix the issue (also pointed out in the following forum post: http://forums.adobe.com/message/2379350 (post number 10)).
Under [HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer], the 'Version' value is left blank by the MSI by default:
Whereas the executable installer creates the value as follows:
1152602
This registry value should be set to the correct version in the installer's Registry table to fix the issue.
Finally, the MSI installer creates a number of registry values under the following path:
[HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer\Mime Types]
These values are *in addition* to the values created under the following path:
[HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins\@adobe.com/ShockwavePlayer\MimeTypes]
(Note there is no space between 'Mime' and 'Types' in the second key path)
The executable installer *only* creates registry keys under the 'MimeTypes' key, and it seems as if this is the correct formatting for the key (also pointed out in the following forum post: http://forums.adobe.com/message/2379350 (post number 11)).
The unnecessary 'Mime Types' registry keys and values should be removed from the installer's Registry table to avoid any potential issues.
I am sorry that this is such a long list, but it seems as if a number of things have been changed in the transition from 11.5.1.601 to 11.5.2.602, and it would be very helpful if these changes could be put back to how they were before, so that the MSI and the executable installers function in the same way as much as possible.
Message was edited by Borgquite - added 11.5.6.606 updateHave posted an updated version of the MST to my webspace here:
http://homepage.ntlworld.com/minkus/shockwave/shockwave115606mst2.zip
This new version fixes the following issues (changes to this version in bold):
MsiInstaller repair & errors on first run as non-admin (removes 'AppData' directory entries)
DCOM errors once Shockwave is installed (adds double quotes to the beginnning of LocalServer32 value)
Incorrect TypeLib paths in the registry (fixed to use built-in [SystemFolder] property)
Default CLSID description value missing (set to 'Shockwave ActiveX Control', as per the executable installer)
Incorrect Shockwave 10 paths in the registry (fixed to use built-in [SystemFolder] property)
Misspelt 'OptionalComponets' registry key (renamed to 'OptionalComponents')
Missing .dcr, .dir, .dxr Content Type registry values (included in the executable installer)
Fixed incorrect AppID registry key (set to use installer's [VERSION] variable)
Removed 'Launch SWDNLD.exe' shortcut created in Programs subfolder (people don't want this - see here)
I have tested this on my network and it all seems to work fine. Unfortunately my original plan to use the executable installer didn't work out as it does not include the Shockwave 10 compatibility components described here and here, so it looks like I'll have to keep this MST file up to date with the latest versions until Adobe fix the problems themselves...
If you want to see the changes that I have made, load up Adobe's 11.5.6.606 MSI file in Orca, then use Transform / Apply Transform to apply the MST, and look for the entries in green.
Please post any feedback to this thread, and I will try to respond if I can help!
Chris Hill
Maybe you are looking for
-
after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks
-
Odd FTP Adapter Behavior?
All - I'm seeing some behavior I don't understand on the BPEL Server. There is a BPEL process that is supposed to pickup files from an FTP server every minute that match the filename pattern *.* except for *.tmp. It will also only pickup files that a
-
i bought my macbook pro on 2013 but last few months its become very slow , is there anyone can help me please ?
-
Hello all, I am one question on OMD0 transaction. I want to secure the access per plant to this transaction. The authority check is only in the object S_TABU_DIS for today. Does everyone can help me ? Thanks !
-
Compiling gettext extension for mod_php
On this thread: http://discussions.apple.com/thread.jspa?messageID=10106396 pterobyte listed some great instructions for downloading and recompiling the gettext extension for PHP. That's exactly what I need, so I followed the instructions and was abl