Events limit can only be dates between 1 and 9 on the day field

Im an student, and im trying to put my timetable into ical as did last year
it goes ok, i set it up to repit every week mondays lessons for example
but when i am trying to set up a limit for this event to repit itself ical only allows me to
put a date between 1 and 9 on the day field.
Does anyone know why is that?
sorry is my english is not so good im from spain and i might not explained very well
thank you

The x86 architecture has a standard formatting for disks that uses up to four primary partitions on a disk. On DOS or UNIX, you can view the partitions with 'fdisk'.
This is layer that Windows and Linux tends to use for filesystems.
Solaris though uses only one of those partitions for its own use (marking it a Solaris partition) and places a label similar to that on a SPARC disk (VTOC). So within the single x86 partition are several further subdivisions (slices).
On solaris, the disk might be /dev/dsk/c0t0d0. You could access one of the Solaris (VTOC) slices as /dev/dsk/c0t0d0s0. As far as I know, Linux does not understand how to address the Solaris VTOC slices (If this isn't true, I'd love to know what the syntax for doing so is).
You'd access the (non-Solaris) x86 parititions like /dev/dsk/c0t0d0p1 or so. While Linux can address extended x86 partitions, Solaris can only address primary partitions.
Darren

Similar Messages

Why can't I translate between Swedish and Polish in the same Word document. This means I want to switch between two keyboards.

Why can't I get a Polish keyboard easily accessible from within my Word program? I have to choose it in Finder and then I can't switch back and forth between English/Swedish and Polish in the same Word document. Surely there must be a simple way of doing this by means of keyboard commands while I write, or do I have to go back to my old PC for that?
Ulf Magnusson

(1) You are talking about switching keyboard layouts, not about translating from Swedish to Polish or viceversa.
(2) The keyboard layout choice is not a function of the application (MS Word) in either Mac OS X or Windows; it is a system choice.
(3) Read
<http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2214.html>
specifically "Input source list" and "Input source shortcuts".
In short, you choose the three keylayouts you wish to use for English, Polish, and Swedish, respectively, and then you set the shortcuts you prefer to use to switch between them.
And it's all there, in the Help files, on your very own computer…

Can only print with manual feed and NOT from the paper tray from websites

When I try to print something from a website, I must manually feed the paper in the manual feed slot. It will not print from the tray. This problem does not happen when I print something from an email with no downloads or something from MSword or Excel. So, it's most likely a browser printer setting issue. Any ideas?
Thanks

Probably related to printer preferences and how they relate to Firefox. If you did the complete reset all the printer setting that Firefox would saved would have been cleared and gone back to the default settings. Without familiarity with that specific printer ''(or even knowing which printer you are using)'' the best advice I can offer is to seek help from a support forum for that brand printer, or for you to reinstall the printer software to get back to the defaults.

How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.

How can I synchronize my iPhoto events? my iTunes doesn't read them and with the app Images in the iPad I can only find Photos, Albums, Faces and Places, not Events.

I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update!

Lower limit can only be changed during initial entry, Message no. NR651

Hi Experts,
As per the number ranges limit values defined in the system for the planned orders, there is a need to increase the number ranges.
System is not allowing us to change the limit values of the Planned orders in MD91 and showing the Message no. NR651.
We have also searched for the available threads in SCN and other sites, but didn't find the root cuase link for this error.
System message:
Lower limit can only be changed during initial entry
Message no. NR651
Diagnosis
You have tried to change the lower limit of an interval which has a non-initial number status.
System Response
The change was not executed.
Please guide us how can we increase the number ranges for planned orders.
Thanks in advance.

Hi,
You can create a new number range or change in transaction OMi2 or in MD91.
Assign the 02 by clicking number range in OMi2
or in transaction OPPQ click on number range & select the 02.
Do the changes as described and analyse the results. Ensure that while testing no body is creating the planned orders.
Regards,
Narresh

When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed.

When I open an event I can only see one photo. The view option for dispaying thumbnails is greyed. Iphoto '08 has worked perfectly for years. Suddenly it's balky~

Have you tried moving the thumbnail size slider at the botton on the screen?
LN

How can I share data between WinXP Pro and Mac OS 10.8.3 via wifi

How can I share data between WinXP Pro and Mac OS 10.8.3 via home wifi.

MartyP wrote:
Or is there a problem with both OS's writing stuff to the
~/Home/Library folder that may be incompatible?
Yes, big time. Mail, for sure, has a different file/folder structure, and would not be happy.
Plus, a number of apps (Apple and 3rd-party) are "Sandboxed." That's a security feature, to prevent malware or bad coding from affecting things it shouldn't. Some of their files, including the preferences files, aren't even stored in the same places!
Or to other places I'm not aware of?
Probably. If you have two versions of the same app, they may or may not expect the same data setup.
To have one User folder for both OS's would save a lot of drive space
Not if you use some or all of woodmeister50's suggestions.
But I'm also not sure how I'd use Time machine with such a set up.
Just as you do now. By default, Time Machine backs-up everything (except things like system work files, most caches and logs, trash) for all users and all internal drives & partitions. By default, it excludes external drives.
You can change those defaults, of course, via TM Preferences > Options.
See Time Machine - Frequently Asked Question #32 for details and considerations of multiple drives.
Presently I backup with . . . clones to other HD's
Good. Yes, clones are different. You need multiple "tasks" to back up multiple drives/partitions. But once set up, that shouldn't be a big deal.

How to pass series of dates (between startdate and enddate) to subreport, which takes only one date as parameter

Relatively new to Microsoft report services. I have created a report which takes a single parameter named 'SelectedDate'. This report runs fine (uses complex query of hours of the selected date and complex joins & aggregate calculations between SQL
database tables). I created a new report with two parameters, namely, StartDate and EndDate. Also created a sql stored procedure which gives all dates between StartDate and EndDate. Added subreport to this report which calls my first report and defined 'SelectedDate'
parameter to get the value as "=First(Fields!dt.Value, "DataSet1") - where dt is the resultset of procedure called in DataSet1. When I run this report, in the subreport, all I see is the report for 'StartDate' which is the passed
value of the first parameter. I can't find a way to pass entire array of dates as parameter, to which user can browse forwards and backwards. Any idea? Thanks in advance for your help!

HI Visakh16..Never mind my comment..I tried it again. This time I went to the completion of previewing..and noticed that the table with DataSet1 does display dates and first report underneath but once I click any other date, it displays the subreport on
full page and navigation back arrow (with hint 'back to Parent Report) solution is not bad..so unless you a way to achieve my desired layout mentioned above - I am good for now! Thanks for your pointer in right direction!
One small observation for thread readers: When I published the report to the report server, the back button (back to Parent Report) which was available to me at design time, is not displayed at client's browser. Upon checking pertinent threads, concluded
that this is known issue for years and recommendation I concluded from various threads is: Use back button of browser and it should (& did) keep the parent report page, with table with selected dates intact. A few have noticed different behaviour
for older browser versions.

Using EPMA to transfer data between HFM and Essbase on 11.1.1.3

Can we use EPMA to transfer data between HFM application and Essbase cubes on Hyperion version 11.1.1.3?
As far my understanding we can only link HFM and Essbase through EAL.
I would be very keen to know from the audience if we can use EPMA to transfer data between HFM and Essbase
Hyperion version 11.1.1.3
Windows 2003 64-bit
Regards
Yogananda Bharadwaj

Hi Yogananda,
Check epma admin.pdf, page 439. Chapter 19 describes how to synchronize and map data between Hyperion applications, interface tables, and external files via EPMA Data Synchronization.
Regards,
Thanos

How can i delete data in psa and how can i partation psa?

hi friends,
can i delete data from psa and how can i partation psa?
Thanking u
suneel.

hi Suneel,
http://help.sap.com/saphelp_nw70/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
Using partitioning, you can separate the dataset of a PSA table into several smaller, physically independent, and redundancy-free units. This separation can mean improved performance when you update data from the PSA. In the <b>Implementation Guide with SAP NetWeaver > Business Intelligence > Connections to Other Systems > Maintain Control Parameters for Data Transfer</b> you define the number of data records needed to create a new partition. Only data records from a complete request are stored in a partition. The specified value is a threshold value.
transaction SPRO to go implementation guide
at database level
http://help.sap.com/saphelp_nw70/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/frameset.htm
If you are using this database you can also partition PSA tables. You first have to activate this function using RSADMIN parameter DB4_PSA_PARTITIONING = 'X'. SAP Note 815186 includes more comprehensive information on this.
hope this helps.

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930

I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?

Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!

You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.

How can I use FaceTime between 2 I-Pads sharing the same email account

How can I use FaceTime between 2 I-Pads sharing the same email address

Cstearns-
I only have one iPad, but was able to add myself to the list of Favorites. When I tried to call, I was not available!
You should also take a look at the Skype App for iPhone. It works on the iPad, where you can choose 2X to expand the display. I haven't tried to add myself to Skype, but have been able to have it connected on both my computer and the iPad at the same time.
You might also consider getting a second address from G-Mail, just for use with FaceTime.
Fred

I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/

Events limit can only be dates between 1 and 9 on the day field

Similar Messages

Maybe you are looking for