Events list on Source

Can anyone hlep me to show the list of events on the Source list on the left?

Thanks for that
Sorry to be thick but how does someone else open my library please?
Do you know someone with Aperture 3.6, who could do that for you?
Then drag your iPhoto library to an external drive or memory stick, large enough to hold your library plus some working space.
The drive needs to be formatted MacOS Extended (Journaled), with the "Ignore Ownership" flag enabled, like described in this document.
Your friend would connect this drive with the library to her/his mac and launch Aperture. Then use the command "File >Switch to library" and select your library. Now import one new photo to the library, to force Aperture to update the events.
Then quit Aperture and eject the drive.
Connect the drive to your mac and test the copied library in iPhoto (use "File > Switch to Library"), if it still works well, before you replace your regular library by it.

Similar Messages

No Source List, No Events List - no way to view stored photos

Hi, When I open iphoto, I see a gray screen and the only photos visible are the ones I downloaded in the last session. There is no tab for "events," no source list, no libraries tab, no way to access any previous events and photos. They are in there somewhere, because when I download again, photos that were stored on the cameras after they were previously download are listed as "duplicates."
First, why is this happening, and second, if anyone knows how I can gain access to my thousands of previous photos, how can I ensure that the "Events" tabs and Source lists are always visible? Help!
Thank you for your assistance, Mac geniuses!

I have just spent the last 4 days trying to figure out where the menu went. I have rebuilt my libraries several times. Gone back in the time machine, etc.. I was blaming my new installation of Snow Leopard and iPhoto 09. Boy do I feel dumb ... and thankful that I finally found your post.
= Bud Jones =

Event ID: 4, Source: Microsoft-Windows-Kernel-EventTracing, maximum file size for session "ReadyBoot" has been reached.

Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          11/10/2009 7:51:03 AM
Event ID:      4
Task Category: Logging
Level:         Warning
Keywords:      Session
User:          SYSTEM
Computer:      herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>4</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>1</Task>
    <Opcode>10</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
    <EventRecordID>28</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="164" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>herbt-PC</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">ReadyBoot</Data>
    <Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
    <Data Name="ErrorCode">3221225864</Data>
    <Data Name="LoggingMode">0</Data>
    <Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!

Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7

Event List view in iCal?

I would love to have an Event List view in iCal like I do on the calendar on my iPhone. Is there such a thing? The particular reason for wanting it (this time) is that one of the calendars in the ON MY MAC list has a number in a oval to the right.
I believe this is trying to tell me that there is a new event that I need to do something about. Problem is, I don't know where to find it.

ecernek,
There is no event list option on iCal like the one on the iPhone.
That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

Event listing shortened in iCal

When I enter some events in iCal they do not appear in their entirety in the calendar. Some events use two or three lines, some cut off in only one line. The only solution I have found is to keep changing the 'name' of the event until I hit on one that does not cut off. Surely there is another solution! Any ideas?

ecernek,
There is no event list option on iCal like the one on the iPhone.
That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

Old   How to find total number of events in an event list?

Hi,
I am developing a j2me application. i Want to find the total number of events in an event list.(ie, If it contains 15 events then it should return length as 15).
Not the length of EVENT LISTS i want to find the Length of EVENTS.
Thanks,
kumar

Hi,
you can find the number of columns and their order using
the <b>'REUSE_ALV_FIELDCATALOG_MERGE'</b>
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = sy-repid
   I_INTERNAL_TABNAME           = 'ITAB'
   I_INCLNAME                   = sy-repid
changing
    ct_fieldcat                  = IT_FIELDCAT
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif
now describe your fieldcat . and find no of columns.
and their order also..
regards
vijay

Open Interface for Approved Supplier Lists and Sourcing Rules

Hi All,
Is there an open interface or an API available for Appeoved Supplier Lists and Sourcing Rules.
Thanks and Regards,
MPH

Hi sandeep,
I prefer to use the API mentioned.
However this is in Oracle Manufactirung and we dont use that module instead I want to define them in Oracle Purchasing.
can I still do it in Purchasing using the same API.
Further as per the document there are 3 entities
01) Sourcing Rule/Bill of Distribution
02) Receiving Organization
03) Shipping Organization
Do I need to define all 3 in order to make it work?
Thanks and Regards,
MPH

Training and event management: Book Attendee List for Business Event List

Dear all,
    I know this:
    PV07: book attendee list for business event
    PV08: book attendee for business event list
   Is there a tcode to book an attendee list for a business event list
Thanks a lot in advance!

Hi Federico,
I think.., no. Below are the tcodes available to book attendee,
PV00 Book attendee for business event
PV01 Rebook attendee for business event
PV02 Prebook
PV03 Replace
PV04 Cancel
PV07 Book attendee for list for Business event
PV08 Book attendee for business event list.
Let me know if you found tcode for your requirement.
Thanks,
Karunakar

Enhancement to bypass "Source not included in list despite source list req"

Dear Experts,
When the indicator source list requirement is maintained in the material master, the system will only allow creation of a purchase order if the source is maintained in the source list (t-code ME01). If its missing we will get an error message when creating or chaging PO with message :"Source not included in list despite source list req".
Is there a enhancement through which we can influence the error message for PO's of type stock transfter order? I tried searching for one but couldn't find a appropriate one.
Had look at ME_PROCESS_PO_CUST & ME_PROCESS_PO also but they were not much useful.
Thank You.
Best Regards,
SP

>
User General wrote:
> Hi thank you very much for your useful reply. My requirement is slightly different though.
>
> I have to avoid the error message not for entire plant but the plant and material number combination.Is there any customizing for achieving this.
>
> In this case if the same plant and material number is used but for different PO type like standard PO(type NB) it should still show an error message as standard.But if the PO type is stock transfer order(Y2UB) then error message to be avoided.
so what you actually want is: source list is obligatory for a combination of plant / purchase order type / material number.
there's no customizing this.
actually, i have difficulties in accepting your search for an exit/enhancement because the configuration of your system does not match your business process = why do you want to avoid an error message in case of a STO scenario where the source list entry is missing?? either you have defined source lists obligatory on plant level - then see to it, that the source lists are maintained in the plant (you can mass generate it using ME05) or it is not ... in which case you will have to train your users accordingly ...
please do not take offense - none is intended - but i wonder why one would make a thing mandatory, only to circumvent the obligation by (intransparent) programming.

Bitlocker enabled drive, recovery key needed during boot, PCS did not match, event id 24635, source bitlocker-driver

Hi
After rebooting one of our test machines, bitlocker wanted the recovery key.
There were no hardware modifications on that machine.
Error message in event log:
Bootmgr failed to obtain the bitlocker volume master key from the TPM because the PCRs did not match
Event id 24635, source bitlocker-driver
Each time the machine starts, the recovery key is needed.
Any idea how to solve that issue and why it happens?
update:
Second partition was created manually on that machine. So that's clear that bitlocker reacts...
But now: how can I confirm those changes so that the recovery key is not needed each time we boot?

Hi,
I would like to confirm if BitLocker accepts the recovery key?
Please update the BIOS to improve the stability for TPM first.
I also would like to suggest you disable and enable BitLocker again to reset the settings.
For more information, please refer to the following link:
http://technet.microsoft.com/en-us/library/dd835565(WS.10).aspx
Regards,
Arthur Li
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

"Supplier list" in PO and "Invitation List" in Sourcing

Hi,
Is it possible to use "Supplier list" in PO as "Invitation List" in Sourcing ?
Regards.

Hi,
Supplier List and Invitation List are entirely different even though they use same suppliers.
Supplier List cannot be used as Invitation List in Oracle Sourcing.
Thanks
-Arif.

HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

How can make the events listed in my chalenda become automatically a reminder in the reminder?:

Welcome to the Apple community.
Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

Event List Window

When I open the event list window in Logic 7 (and 7.1) the arrow on the left,
which is supposed to point to the current event , points to the event BEFORE the current one unless i resize the event list numbers larger! Does this make sense?
It is most frustrating.

Wouldn't it be easier to select a note value rather than typing in what the value is for the note? For example, wouldn't it be nice if there was a set of buttons with pictures of a whole note, 1/4 note, etc. (like in Cubase) or a drop down menu (like Logic's quantize menu) to select from? It's killing me to try and memorize the numerical values for each kind of note. What if I wanted a fixed duration of an 1/8th note tuplet? How would I calculate the value for that? Is there an option somewhere I can turn on to make setting note values easier? This is my only problem with the transform editor...

Flash builder ,Toggle break point ,get error:Error getting list of source files

In Flash builder ,debug a Web Application, when try to toggle a break point , flash builder prompts:
Error getting list of source files
flash.tools.debugger.InProgressException
at flash.tools.debugger.concrete.DSwfInfo.swdLoaded(DSwfInfo.java:156)
at flash.tools.debugger.concrete.DSwfInfo.getSourceList(DSwfInfo.java:131)
at flash.tools.debugger.threadsafe.ThreadSafeSwfInfo.getSourceList(ThreadSafeSwfInfo.java:78 )
at com.adobe.flexbuilder.debug.breakpoints.FlexLineBreakpoint.findSourceFiles(FlexLineBreakp oint.java:512)
at com.adobe.flexbuilder.debug.breakpoints.FlexLineBreakpoint.instantiate(FlexLineBreakpoint .java:577)
at com.adobe.flexbuilder.debug.model.FlexDebugTarget.instantiateBreakpoint(FlexDebugTarget.j ava:525)
at com.adobe.flexbuilder.debug.model.FlexDebugTarget$1.run(FlexDebugTarget.java:568)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)

who can answer this?

Event id 6037 source Lsaserv

hello All .
I have system warning on both DAG Exchange 2010 sp3 servers (Event id 6037 source Lsaserv )
"The program svchost.exe, with the assigned process ID 1728, could not authenticate locally by using the target name HOST/servername\. The target name used is not valid. A target name should refer to one of the local computer names, for example,
the DNS host name.
Try a different target name."
how can fix it .
Thank you

Hello,
Please try the the following suggestions in the similar thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/05cedf19-cd02-4c26-9651-4b5d5f46d58b/event-6037-lsasrv?forum=operationsmanagergeneral
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Events list on Source

Similar Messages

Maybe you are looking for