Events past midnight, now showing up with start time on BOTH days.

If you have an event on one day that goes past midnight, iCal now puts the event on both days with the same start time on both days. How do I stop this and have it only show the start time on the First day (like it did before Mountain Lion)?

Hi -
Thanks for doing that. I clicked on the annotations, nothing happened, was I supposed to see additional stuff or are they just markers? I just see text balloons now.
MDmacuser wrote:
As far as the filter, I am just using the built in filter to FCE.
OK, so you are basically replicating the clip on V1 on V2 and applying a blur, then using the crop tools to constrain the blur to the area that you wanted blurred - so that the blur is the only visible part of V2, the rest of V2 has been cropped transparent and is just showing through to V1 below?
OK, click on V3 and type Control - B to temporally hide the clip. Does the effect work for masking the first ID, all through the clip?
Now click on V3 again and type Control - B to re-enable the clip so that it is visible.
So on V3 you replicated the clip on V1 to V3, and applying a blur, then using the crop tools to constrain the blur to the area that you wanted blurred - so that the blur is the only visible part of V3, the rest of V3 has been cropped transparent and is just showing through to V1 and V2 below?
If you did it that way - should work.
Let me know if I don't understand what you are doing.
thanks
MtD

Similar Messages

I made several websites in iweb. since upgrading to 10.8.. NONE of them work. they all show up with 'start a new website' upon launching iweb! HELP!!! x

i made several websites in iweb. since upgrading to 10.8. NONE of them work. they all show up with 'start a new website' upon launching iweb! HELP!!! i have copied all domain files along with the folders to new macbook pro... nada!! i'm kinds freaking out... any advise would be greatly appreciated! thank you ...x

See this page for using iWeb with Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

TS2755 I note with IOS8 that when I delete a msg from a thread it still shows up with the time as a recent msg. How do I remove this without deleting the entire thread?

I Note with the iOS8 update when I now delete a msg from a contact thread it still shows up with the time as a recent msg. How do I delete this from recent without deleting the entire thread?

BC
My understanding is that music syncing is a one way process from computer iTunes to your iPhone. I think what you are asking is to have IOS synching back to an OSX or PC system. The software doesn't work that way.
You either have to uncheck the songs to be synced or create a separate playlist for "BC Canada iPhone" and only sync that playlist.
As well any purchases you made on your iPhone need to be transferred to your iTunes so they can come back to your phone when you re-sync.
Hope this helps, even though it's not the answer you might have wanted.
Cheers

Show channels with own time channel and different length in one 3D graph

Hi,
How can i show channels with own time channel and different length in one 3D graph?
My consideration looks like this, but i didn't found a solution with acceptable performance. ( i have many channels to merge and many data in them)
i have 4 Channels 2 with values and 2 with time.
Example:
Pair 1:
1 - 3
2 - 4
3 - 5
4 - 8
5 - 9
Pair 2:
1.5 - 6
2.3 - 7
4.5 - 8
I want than this result:
1 - 3
1.5 - null
2 - 4
2.3 - null
3 - 5
4 - 8
4.5 - null
5 - 9
And
1 - null
1.5 - 6
2 - null
2.3 - 7
3 - null
4 - null
4.5 - 8
5 - null
thanks a lot
by
Stefan

Hi StefanF,
You need to first create the timebase that you want (in this case with a 0.5 increment) using the "Generate Numeric Channel" ANALYSIS function, then use the resulting time channel in the "Linear Mapping" ANALYSIS function for each of the original channel pairs.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

FireFox doesn't appear to shut down completly when I quit, when restart it asked to exit FireFox eventhought it closed. When shut down computor error messeage comes up ' ns AppShell: Event Window end now and computor with shut down using 5.0.1

This happens after first time opened and closed. If I try to open from desk top, hour glass shows for a few seconds then goes away and FireFox doesn't open.
If after opened once and try to use 'url' link for e-mail (outlook express) it doesn't open the link and ties up e-mail.
Shut down computer and error box comes up 'ns AppShell: Event window' end now and computer will shut down.

Is my Firefox problem a result of Malware ?
https://support.mozilla.com/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20malware
Firefox Hang at Exit
https://support.mozilla.com/en-US/kb/Firefox%20hangs
Firefox will not Start
https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start
Check and tell if its working.

Publishing Ical in weekly view with start time I want

I have my Ical set up to start at 11am and end at 9pm. When I publish my calendar it still shows start time at 7am on weekly view. How do I publish my Ical with the start and end times I want?
Thanks

epee91,
What setting do you have in System Preferences...>Language & Region>First day of week:?

Why does GMT show in the starting times for sports

On my Scoreboard game starting times used to be shown as PDT or PST. Now it shows GMT. I know that Pacific time is 3 hours earlier than my area's Eastern time. How much difference is there in GMT and Eastern time and why the change?

hello, please contact the website where you're having this issue - it isn't something that is controlled by your browser.
for GMT conversion relative to your location see www.wolframalpha.com/input/?i=current+time+in+timezone+GMT

When using Firefox today a strange page with the title wonderhowto showing video instruction appears and all other open pages are closed. I have minimalised this stranger to the screen base and it now shows there with a mini firefox attached!

Please bear with me as I am quite new to computers. Early today on start up I was asked to upgrade an Apple app. I declined as I did not have time.
I opened Firefox as usual and went into several sites mail news etc and all seemed fine. Late morning this strange and quite professional looking video instruction page appeared full of photo's and instructions etc, the page took over the whole screen I thought it was strange so I closed it and all my open Firefox sites had gone. This has now happened several times. I have now noticed that when it is up there is a website address at the bottom of the screen. I tried to copy and paste this but it would not let me. There is a name scorecardresearch.com. Does this strike a bell with anyone?

Hello,
My name is Bryan Crow, and I am the CEO of WonderHowTo.com. This problem was brought to my attention this morning by others who have reported the same problem to our contact address: [email protected] I'm very sorry to hear this is happening.
I assure you this is not something our website created or installed on your computer. Most likely it is some form of spyware or virus that is opening our website in order to hide it's true purpose. We are a large and trusted source for how-to articles and videos, so there is no reason we would choose to annoy people with such an obnoxious and intrusive behavior. Frankly it's very upsetting that someone would create malware that directed people to our website.
Naturally, our team would like to do whatever we can to try and find the culprit behind this so we can report them. If any of you can provide me with additional information by emailing [email protected], it could help us get to the bottom of this.
Specifically:
* Have you installed or updated any Firefox Add-Ons recently (go to Firefox -> Add Ons to see the list of add-ons you have installed)?
* What Firefox Add-Ons do you have installed?
* Have you tried running a virus or spyware scan on your system? If so, which software did you use and did it help?
* What URL is opening up when you see WonderHowTo, and what exact time of day (and in what time-zone) did you see it?
Thank you for your help.
Bryan Crow, CEO
WonderHowTo
1832 Franklin St
Santa Monica, CA 90404

JScrollPane now showing up with JList using TableLayout

Hi,
I have JFrame using TableLayout. On this JFrame I have added a JPanel that uses TableLayout too. Now this panel is divided into 4 cells. One each cell I am adding a JList. ALl the lists show up fine on the appropriate cells on the panel, but they don't hav any scroll bars. Below is the code.
Please help.
Thx, Sid.
DefaultListModel listModel = new DefaultListModel();
JList list = new JList(listModel);
list.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
list.setVisibleRowCount(-1);
listScroller = new JScrollPane(list);
listScroller.setPreferredSize(new Dimension(250, 80));
listScroller.setVerticalScrollBarPolicy(
     JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
listScroller.setHorizontalScrollBarPolicy
     (JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
panel.add(list, new TableLayoutConstraints(2*itr1, 0, 2*itr1, 0,
                    TableLayout.FULL, TableLayout.FULL));
lg.getListModel().addElement("Element1");
lg.getListModel().addElement("Element2);
.

Okay, I think I know what I am doing wrong. I need to add the JScrollPane to the panel and not the JList!

In address bar, my banking site now shows up with grey padlock, it's always been green before, why?

Padlock at address bar for my banking site, Wells Fargo, used to be green, now it is grey.
In chrome and internet explorer it is green. Is this a problem with firefox or is website been re directed somehow? (I have firefox 25.1 on dell inspiron 15 laptop running win8.1 64bit)
Also, since ver 24, firefox sometimes loads what appears to html code (text only), I have to refresh to get the picturesetc..
Also, on https sites when i enter and submit info, I get an error message as follows: An error occurred during a connection to startpage.com. SSL received a record with an incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_read)

have the problems settled?

External Firewire Drive Has Now Showing mounting with Intilize

i have a seagate 1tb external firewire drive. its been working and has about 500gigs of info on it. today it is showing up as a unformatted drive. disk warrior is not seeing it. is there another program that could repair maybe tech tool or any other suggestions
thanks

If Disk Warrior won't see it.....ouch.
Data Rescue II is good, but again, if DW won't see, it might be toast, sorry.
As well, here is Apple doc.#88338 on getting FireWire to work.
http://support.apple.com/kb/HT1317?viewlocale=en_US
...perhaps it is a bus issue and the drive itself is ok. Do you have another computer/cable etc. to test it with...

Photos showing up with no dates in both iphoto and aperture?

Why has my photos of 60,000 plus have many of the photos with no dates on the library view in iphoto or aperture? This causes my whole library to be out of order. How do I go about getting those dates back so I can see them in events and search by date. Some of the photos have dates and some just have a string of numbers associated with it. Please help

Can you please show a sample of the wrong dates - both for Aperture and iPhoto?
What is your Aperture version and your iPhoto version exactly?
What did you do, before this problem started? Have you tried already some trouble shooting, like repairing the Aperture library ? Aperture 3: Troubleshooting Basics http://support.apple.com/kb/HT3805
Regards
Léonie

Video filter now showing up at right time point

I am attempting to use the gaussian blur to block out the ID cards of two individuals in my clip.
I used V2 to create a filter mask for one individual and then used V3 to create a filter mask for the second individual. The ID card for the individual in V2 appears from the start of the clip till the very end. On the other hand, the ID card for the individual in V3 appears midway into the clip until the end.
When I click on the clips with the filters in place, the black bars indicating where the filter "mask" and filter "gaussian blur" beginning and end points are in the correct position on the timeline.
However, rather than the blur appearing on the first individual at the beginning of the clip, it appears on both individuals midway through the clip.
How can I make the blur appear on the first individual from the start of the clip and have the blur appear on the second individual only midway through the clip.
thanks

Hi -
Thanks for doing that. I clicked on the annotations, nothing happened, was I supposed to see additional stuff or are they just markers? I just see text balloons now.
MDmacuser wrote:
As far as the filter, I am just using the built in filter to FCE.
OK, so you are basically replicating the clip on V1 on V2 and applying a blur, then using the crop tools to constrain the blur to the area that you wanted blurred - so that the blur is the only visible part of V2, the rest of V2 has been cropped transparent and is just showing through to V1 below?
OK, click on V3 and type Control - B to temporally hide the clip. Does the effect work for masking the first ID, all through the clip?
Now click on V3 again and type Control - B to re-enable the clip so that it is visible.
So on V3 you replicated the clip on V1 to V3, and applying a blur, then using the crop tools to constrain the blur to the area that you wanted blurred - so that the blur is the only visible part of V3, the rest of V3 has been cropped transparent and is just showing through to V1 and V2 below?
If you did it that way - should work.
Let me know if I don't understand what you are doing.
thanks
MtD

Events booked on icloud show up at different times on iphone calander?

The times I book in events on iphone change when I bring them up on icloud.. or if booked in on icloud show up in a different time on iphone. usually a few hours different but sometimes around day either side of when the event was actually booked for... can this be fixed?
Thanks in advance
Nick Parkin

Welcome to the Apple Community.
Check that the time zone is set correctly on each device.

ICal appt 2300-0100 appears at start time on 2 days on iPod

I have a meeting that occurs every Thursday from 11 PM until 1 AM Friday. This appears correctly in iCal. My iPod shows two appointments from 11PM to 1AM, one on Thursday and one on Friday.
The Thursday entry is correct. There should either be no Friday meeting or the item should only go from midnight to 1 AM.
This is a business tool for my contacts, calendar, and backup; it is about to get returned. I have 3 days to decide.
Thanks in advance.
MacPro 5thgen iPod 60GB Mac OS X (10.4.7)

Not much help but i have just replicated your problem on my iPod. It seems there is an issue with timed events that go over onto the next day. I tried all kinds of event times but whenever they occured over two days this problem always occured. I cannot think of any workaround for this either.
I am running a 1st Generation iPod with software version 1.2 / iTunes version 7 and iCal version 2.0.3
Sorry I couldn't be of more help!

Events past midnight, now showing up with start time on BOTH days.

Similar Messages

Maybe you are looking for