Events, systems and agents

dear all,
i have dificatly to understand what is busniess events and why to use it in oracle wf, i have read the guide ch. 13,14 but coldnot understaned it. can any one plz give some hints tips about business events and how to use them.
thanking you
fadi

Fadi,
Please check out the "Getting Started with Workflow and Business Event System" document. It is available on OTN.
(http://otn.oracle.com/products/ias/workflow/release262/workflow_wp_bes.pdf)
Cheers,
Raja

Similar Messages

CSA MC Events Log and Agent Panel Events Corrolation

I have recently install CSA MC 6.0.0.201 and the agent on a Win2003 server. I have a question of events showing up in the agent panel and not showing up in the MC events log.
I see a number of events in the agent 'panel' event viewer. At the end of the event is a number in brackets like [176].
When I look at the MC event viewer but those events are not being reported.
My query is:
#1 I believe the example [176} is the rule being triggered. So if the event is not showing up in the event viewer how to I find that rule in the policies? I finally did stumble across the rule and I see that logging is disabled for that rule, but finding that rule was a needle in the haystack search. Is there an easier way to find rules?
#2 Maybe I do not understand this part but in the MC I placed this server (the one with the MC) into 'Audit Mode' in hopes that would get the events from the agent to show up in the MC event log. No good. Is there a way to get all events - even if the rule says to not log the event - so show up in the MC log so I can creat an exception?
Thanks
Larry

Tom,
I think I may have made some progress. Yes I'm in advanced mode. I went into Systems | Groups and first selected the 'Servers' and turned on logging. Still most the events in the agent event viewer were not making it to the MC event log.
So I went back in to the Systems | Groups and found there was a group called 'Servers - CSA Management Center' and turned on logging there and that got the events to start flowing into the MC events.
Maybe this will help me get going.
Larry

CCMSPING Alerts for offline systems and agents

At the moment we monitor our systems with ccmsping and let send alerts for the following MTS classes:
Availability_SysPercent_ABAP
Availability_InstPercent
Availability_RFCPercent
Availability_GroupPercent
CsmTaskR3Instance.Availability
CsmTaskR3Instance.Heartbeat
Now the problem is, the alert will be generated only once for every threshold value. Once for green to yellow, from yellow to red and for zero availability. But we would like to send in a regular interval a mail for non availability to identify really offline systems or network gabs.
I've tried to change the following settings:
Which alerts should be kept?
Display all-clears in alert browser?
Set "Value Obsolete" and Inactive after
Also Trigger Heartbeat LAert?
But we have only three alerts for green to yellow, yellow to red and zero availability and nothing more.
What I have to do, to send mor the one alert for offline systems.

Hello Rene,
For performance MTEs it is only possible to raise an alert if the threshold is exceeded as you describe. This raises an alert only once because the threshold was met only once. I do not believe there is a standard method to repeat alerts without resetting the alert because what you describe is operating as designed. So there is no standard setting for this.
Regards,
Brendan

Whatis business event system,subscription-based processin in oracle workflo

can you please highlight on business event system and subscription based processing in oracle workflow
i web searched it too but am still confused
need to clear my mis conceptions
thanks

hello hussein
I have gone through some material already from oracle website but somehow am still confused
can you shortly highlight the difference between them if possible
thanks
Muhammed

COM+ Event System failed to fire the StartShell and Logon method after installation of PM 1.43

Hi Guys,
After installation of Power Manager 1.43, the following errors were immediate shown at event viewer: COM+ Event System failed to fire the StartShell and Logon method on subscription {F6FE5592-FCBC-44AD-A836-D37F5085ED5B}-{00000000-0000-0000-0000-000000000000}-{00000000-0000-0000-0000-000000000000}. The subscriber returned HRESULT 80004001.
Please advice if this is a known issue? Thanks!

Hello,
this is a known problem. See this thread
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 iMac (24-inch, Early 2008) (Verified)
 iMac - model: iMac8,1
 1 3.06 GHz Intel Core 2 Duo CPU: 2-core
 4 GB RAM Upgradeable
 BANK 0/DIMM0
 2 GB DDR2 SDRAM 800 MHz ok
 BANK 1/DIMM1
 2 GB DDR2 SDRAM 800 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
 NVIDIA GeForce 8800 GS - VRAM: 512 MB
 iMac 1920 x 1200
System Software: ℹ️
 OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
 Hitachi HDS721010KLA330 disk0 : (1 TB)
 EFI (disk0s1) <not mounted> : 210 MB
 Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
 Apple Inc. Built-in iSight
 Apple, Inc. Keyboard Hub
 Apple, Inc Apple Keyboard
 Apple Computer, Inc. IR Receiver
 Apple Inc. BRCM2046 Hub
 Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
 /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
 Mac App Store and identified developers
Problem System Launch Agents: ℹ️
 [killed] com.apple.CallHistoryPluginHelper.plist
 [killed] com.apple.CallHistorySyncHelper.plist
 [killed] com.apple.coreservices.appleid.authentication.plist
 [killed] com.apple.icloud.fmfd.plist
 [killed] com.apple.Maps.pushdaemon.plist
 [killed] com.apple.printtool.agent.plist
 [killed] com.apple.SafariNotificationAgent.plist
 [killed] com.apple.sbd.plist
 [killed] com.apple.scopedbookmarkagent.xpc.plist
 [killed] com.apple.telephonyutilities.callservicesd.plist
 [killed] com.apple.warmd_agent.plist
 11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
 [killed] com.apple.AssetCacheLocatorService.plist
 [killed] com.apple.ctkd.plist
 [killed] com.apple.emond.aslmanager.plist
 [killed] com.apple.icloud.findmydeviced.plist
 [killed] com.apple.ifdreader.plist
 [killed] com.apple.nehelper.plist
 [killed] com.apple.nesessionmanager.plist
 [killed] com.apple.periodic-daily.plist
 [killed] com.apple.periodic-weekly.plist
 [killed] com.apple.softwareupdate_download_service.plist
 [killed] com.apple.wdhelper.plist
 [killed] org.cups.cupsd.plist
 12 processes killed due to memory pressure
Launch Agents: ℹ️
 [not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [running] com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [loaded] com.adobe.SwitchBoard.plist [Click for support]
 [running] com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
 ChronoSyncBackgrounder Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
 Dropbox Application (/Applications/Dropbox.app)
 Canon IJ Network Scanner Selector2 Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
 Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
 Google Earth Web Plug-in: Version: 6.1 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
 Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Click for support]
 OVSHelper: Version: 1.1 [Click for support]
 AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
 AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
 DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
 FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
 iPhotoPhotocast: Version: 7.0
 QuickTime Plugin: Version: 7.7.3
 SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
 AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
 Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
 JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
 WebEx: Version: 1.0 [Click for support]
 Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
 Adobe Version Cue CS2 [Click for support]
 Flash Player [Click for support]
 Flip4Mac WMV [Click for support]
 VIA PrefPane [Click for support]
Time Machine: ℹ️
 Time Machine not configured!
Top Processes by CPU: ℹ️
 3% WindowServer
 3% Mail
 2% com.apple.iCloudHelper
 1% Creative Cloud
 1% Google Chrome
Top Processes by Memory: ℹ️
 223 MB Google Chrome
 150 MB Finder
 129 MB Google Chrome Helper
 112 MB Mail
 69 MB Google Drive
Virtual Memory Information: ℹ️
 35 MB Free RAM
 1.45 GB Active RAM
 1.45 GB Inactive RAM
 888 MB Wired RAM
 27.01 GB Page-ins
 851 MB Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
 SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
 View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Difference between OMS system time and Agent system time is 117 mins and ha

Hi Guys,
In one of my office server i have changed the system time.After changing the time i have got this below alert.
Could please help me out...

Please, provide more details:
1. Is the agent and OMS on the same machine?
2. If different, is the system time on both machines identical?
3. What is the operating system for OMS and agent?
-- Sergiusz

Business Event System in Workflow

Hi,
I am having difficulties with the Business Event System (BES).
Actually, I've read the Oracle documentation about BES. Still I don't understand much.
There are little documentation about the BES, and I still get blank point.
Here are my questions :
1. What the Business Event System is?
2. Some of documentations show that using the BES, the workflow can interact with
different system.
What does 'different system' mean?
Does it mean to another computer (perhaps Client Server type)?
Or to another system (like headquarter which has several branches) located in
different location?
Or to another database service in the same computer (perhaps ORCL and ORCL2)?
Or with another database applications (i.e Microsoft SQL Server, MySQL)?
3. How do we use the BES?
How do we define BES?
Where do we use the BES?
Is it using PL/SQL?
Or the BES itself is a PL/SQL which is inside a procedure or function or trigger (used
to manipulate the database)?
What does the BES look like? Is it a PL/SQL code, an e-mail, or ...?
4. Some documentations said that using the Event (with Receive type) as a start node
(in Workflow Builder), the process will wait and respon until a Business
Event is detected?
How do we interact with BES?
How do we know what kind of BES to start the process?
Do we use the Oracle Advanced Queuing?
Is it using an e-mail to start the Event?
5. There is a statement from the "Feature Overview Oracel9i Application Server : Oracle Workflow" (from Oracle site)
"Business event messages from Oracle Workflow can be placed on or received from Oracle9i Advanced Queues, providing support for Oracle Net as well as HTTP and HTTPS communication protocols."
and
"The Business Event System uses Oracle Advanced Queuing to propagate messages between communication points on systems, called agents, using a specified protocol. Events received from external systems are processed by an agent listener that runs on the agent's queue."
Actually what the Advanced Queuing is?
Is it the mechanism of scheduling activites such as sending a message?
Is it use to start the Workflow Background Engine periodically?
What does the Events received from external system is? Is it an e-mail?
If it is True, so the workflow process could be start using an e-mail?
6. There is also a documentation stated that the Event can be raised using the PL/SQL WF_EVENT.Raise() API.
The Event also could be launch using the Workflow Home Page (Workflow monitor) in Event link?
So what does the BES is used for, if the Event could be launch using a PL/SQL?
Is the process of raising the Event called BES?
Such as a procedure to manipulate database tables that consist the WF_EVENT.Raise().
What is Generate Function is?
7. What Agent is?
What Subscription is?
What Event group is?
8. Perhaps there is a guide book of using the Business Event System?
Any light would be grateful.
Many many thanks,
Buntoro

Hi
I am in exactly the same position...
Have queued up my events using wf_event and the subscription is putting them in WF_OUT ok.
So, I guess that WF_OUT is a multisubscriber queue, so when we register with it in BPEL it asks for us to identify ourselves using the consumer and/or correlation ID.
However, I'm with you in that I have no idea how to specify the consumer.
There is a CORRID column in WF_OUT and I'm banking on that being the correlation ID at the moment....
I'll let you know if I crack it!
Chris

Configuring Business Event System of Oracle WorkFlow.

Hi all,
I created two queues in MQ Series. WF_JMS_IN and WF_JMS_OUT.
As I can configure my Business Event System Agents of Oracle WorkFlow to listen these lines of messages?
Thank you very much.

Hi,
Can anyone provide the solution "How to find the Workflow Business Event System Name for E-Business Suite Server"?
Oracle pl. help .
-Prashant

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

Upgraded to ios 7.1 battery drain is significant and have lost my calendar events. how do i get my events back and why am i losing so much power now?

how do i get my calendar events back and why the power drain after upgrading my operating system to 7.1?

Thought I'd reply to this seen as no one else has, I am also experiencing very similar problems with my 4s and by the looks of it is it's across all handsets. I've never had any battery issues with my iPhone even 7.0.6 was fine, but since updating to 7.1 the battery is ticking down very fast. I fully charged in the morning and left it in my locker all day at work when I got my hands on it it's gone down to 52% just on its own!!
I really hope they sort this out fast the irony is 7.1 was supposed to help battery life!

Intermittant (not constant) SQL database ShareWebDb login failed events 3760 and 2424

My Sharepoint 3.0 services that were bundled with SBS 2008 appear to be working fine. Companyweb, etc, all work w/o issue, so I don't want to take violent action, but these errors seem to be accellerating so I would love to know if there is a known
solution.
I typically receive the following (these are in reverse time order, latest at the top, just as they appear in the event log):
Error Event ID: 3760 SQL Database 'ShareWebDb' on SQL Server instance 'np:\\.\pipe\MSSQL$Microsoft##SSEE\sql\query' not found. Additional error information from SQL Server is included below. Cannot open database "ShareWebDb" requested
by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.
one second earlier:Error Event ID: 2424 The update cannot be started because the content sources cannot be accessed. Fix the errors and try the update again. Context: Application 'Search', Catalog 'index file
on the search server Search'
Information Event ID: 18456 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="49152">18456</EventID>
<Level>0</Level>
<Task>4</Task>
<Keywords>0x90000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:06.000Z" />
<EventRecordID>491461</EventRecordID>
<Channel>Application</Channel>
<Computer>myserver.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>NT AUTHORITY\NETWORK SERVICE</Data>
<Data>[CLIENT: <named pipe>]</Data>
<Binary>184800000E000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Two seconds earlier
Information Event ID 17137 No description, here is the Details:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="MSSQL$MICROSOFT##SSEE" />
<EventID Qualifiers="16384">17137</EventID>
<Level>4</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2010-11-12T18:35:04.000Z" />
<EventRecordID>491460</EventRecordID>
<Channel>Application</Channel>
<Computer>mysever.mydomain.local</Computer>
<Security
UserID="S-1-5-20" />
</System>
<EventData>
<Data>ShareWebDb</Data>
<Binary>F14200000A000000170000005000450054003300310030005C004D004900430052004F0053004F00460054002300230053005300450045000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I get more 3760 errors than 2424's. However, the
2424's do seem to usually correspond to a 3760 18456 17137 occurance and the
3760 are always preceeded by 18456 17137. I was getting one or two sets a day, lately that has increased to 5 or 10.
I've done a lot of
web research on Sharepoint Errors 3760 and
2424 and I see a number of people are experiencing the the same issue. Most of what I've come across for solutions do not apply, since errors are intermittent, not chronic and my public remote URL has already been added
to BackConnectionHostNames as per:
http://blogs.technet.com/b/sbs/archive/2009/08/05/sharepoint-services-3-search-event-errors-after-an-sbs-2008-update-rollup.aspx
I installed the SQL Server Management Studio Express so I could try to track down the permissions on this database. I see the SQL server instance, MYSERVER\Microsoft##ssee, and it shows as running, but when I try to connect to it I get the following
error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)" I'm assuming that is because I don't have access permission for that internal database.
I don't see any errors in the event log related to failed logins or any errors at all from the SQL server, but there are the time matching informational entries right before the error events and lots of other 17137's and 2803's from MSSQL$Microsoft##ssee

Thank you Kevin, that does seem to match my symptoms and I have made the change suggested. Just incase that page becomes unreachable by others, here is the part of the page that applies to this:
Issue:
=========
Receive event error 3760 and 6398 on SBS 2008
Cause:
==========
Issue was caused by incorrect Auto Close option for ShareWebDb database
Solution:
==========
1. On the SBS 2008 server, click Start -> All Programs -> Microsoft SQL Server 2005, right click SQL Server Management Studio Express and choose run as administrator.
NOTE: You must run it as administrator to perform steps below.
2. In the Server Name box, type \\.\pipe\MSSQL$Microsoft##SSEE\sql\query, click connect.
3. Expand Database node and right click the ShareWebDb then choose properties.
4. Click Options in the left pane, in the right pane, please check whether the Auto Close option is set to True, if so, please change it to False.

Events 1863 and 2093 post SBS 2003 SP2 Migration to 2008 R2 SP1

I have migrated AD from a 2003 SBS SP2 server to a 2008 R2 SP1 server using the following article: http://technet.microsoft.com/en-us/library/dd379526.aspx
I realize now that this was not the right article as it is for 2003 SP2 Standard, however I don't need to migrate Exchange or other applications.
That was 3 days ago, yesterday morning I noticed the following events in the 2008 error log: Error 1863 and Warning 2093
There appears to be no issue with the domain currently, everyone was able to login in without issue this morning. Both servers are continuing to run, although I plan to demote the 2003 and decommission the hardware if there are no issues (as advised by the
post-migration instructions of the above article). I don't need the 2003 SBS server anymore, should I just transfer the FSMO's now and demote the server?
I can provide full text of the events, but I have removed identifying information:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 2/17/2014 4:18:14 AM
Event ID: 1863
Task Category: Replication
Level: Error
Keywords: Classic
User: ANONYMOUS LOGON
Computer: SERVERNEW.generic.local
Description:
This is the replication status for the following directory partition on this directory server.
Directory partition:
CN=Schema,CN=Configuration,DC=generic,DC=local
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS KCC" />
 <EventID Qualifiers="49152">1863</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>5</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8080000000000000</Keywords>
 <TimeCreated SystemTime="2014-02-17T09:18:14.599176800Z" />
 <EventRecordID>243</EventRecordID>
 <Correlation />
 <Execution ProcessID="504" ThreadID="660" />
 <Channel>Directory Service</Channel>
 <Computer>SERVERNEW.generic.local</Computer>
 <Security UserID="S-1-5-7" />
</System>
<EventData>
 <Data>CN=Schema,CN=Configuration,DC=generic,DC=local</Data>
 <Data>1</Data>
 <Data>1</Data>
 <Data>24</Data>
 <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
</EventData>
</Event>
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 2/17/2014 4:18:14 AM
Event ID: 2093
Task Category: Replication
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: SERVERNEW.generic.local
Description:
The remote server which is the owner of a FSMO role is not responding. This server has not replicated with the FSMO role owner recently.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=Schema,CN=Configuration,DC=generic,DC=local
FSMO Server DN: CN=NTDS Settings,CN=SERVEROLD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=generic,DC=local
Latency threshold (hours): 24
Elapsed time since last successful replication (hours): 25
User Action:
This server has not replicated successfully with the FSMO role holder server.
1. The FSMO role holder server may be down or not responding. Please address the problem with this server.
2. Determine whether the role is set properly on the FSMO role holder server. If the role needs to be adjusted, utilize NTDSUTIL.EXE to transfer or seize the role. This may be done using the steps provided in KB articles 255504 and 324801 on http://support.microsoft.com.
3. If the FSMO role holder server used to be a domain controller, but was not demoted successfully, then the objects representing that server are still in the forest. This can occur if a domain controller has its operating system reinstalled or if a forced
removal is performed. These lingering state objects should be removed using the NTDSUTIL.EXE metadata cleanup function.
4. The FSMO role holder may not be a direct replication partner. If it is an indirect or transitive partner, then there are one or more intermediate replication partners through which replication data must flow. The total end to end replication latency should
be smaller than the replication latency threshold, or else this warning may be reported prematurely.
5. Replication is blocked somewhere along the path of servers between the FSMO role holder server and this server. Consult your forest topology plan to determine the likely route for replication between these servers. Check the status of replication using
repadmin /showrepl at each of these servers.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.

Hi JPowered,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Justin Gu

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndiws 7 system and use a Intel core processor. I have restarted several times and still ge this

Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I have a wndows 7 system and use a Intel core processor. I have restarted several times and still ge this error. I have also tried to reinstall firefox and get the same error
== This happened ==
Every time Firefox opened
== today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDS; InfoPath.2; .NET4.0C; AskTbUT2V5/5.8.0.12304)

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

HT2513 iCal string of events repeat and end on a given date?

Is there a way to have any given string of events repeat and end on a given date?
Example, I have a different training regiment for each day leading up to an event/date and then will have the same training regiment again leading up to another event. I want each day's training regiment to show up as an event per day... but don't want to have to post each days repeat string of training prior to each event... and they don't nessecarily repeat monlthy or regularly... I want to set an end date and all the training fill in from that date backwards. Is this possible??

Does this work any better? New-jobtrigger requires a datetime object.
$csv6=Import-Csv D:\Lzero\Coll_Schd\Dependent_List.csv
foreach($cs in $csv6)
{$sys=$cs.CI
[datetime] $schd=$cs.RebootSchedule
$user="Domain\username"
$paswd=ConvertTo-SecureString -String "P@ssWord" -AsPlainText -Force
$Credential=New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $user,$paswd
Register-ScheduledJob -Name System_Restart -ScriptBlock {
Restart-Computer -ComputerName $sys -Force -wait} -Trigger (New-JobTrigger -At $schd -Once) -ScheduledJobOption (New-ScheduledJobOption -RunElevated) -Credential $Credential

Events, systems and agents

Similar Messages

Maybe you are looking for