Eventvwr logs over 6200 errors and warnings

My setup:
* Dell i7 with 8G of memory.
* Windows 7 sp1 Prof
* SQLServer 2008 with BIDS2008
* Oracle11gR2 with SQLPLus and SQLdeveloper
* Java 7 Update 40 Std Edition
* McAffee Security Center Version12.8
* Malwarebytes Anti-Malware (Premium) 2.0.2.1012
eventvwr shows over 6,200 errors and warnings.
Errors include kernel-event tracing, MCUpdate, PrintService, DHCP client, DistributedCOM, SQLISService100, MSSQLServer... and many more
But the laptop boots up and run all the installed software without complaining...
QUESTION 1: How to I clear the events in Eventvwr and start over so I can monitor the errors as they occur?
QUESTION 2: On startup, McAffee asks me whether I want to allow modification to the computer, this usually occurs after some apps downloaded updates e.g. Windows updates, Adobe updates etc...
[email protected]

Hi,
To clear event log, you can refer to this article, before that, would you mind save and share the event log for our research?
Clear an Event Log
http://technet.microsoft.com/en-us/library/cc722318.aspx
For your second question, we don't recommend that using 3rd part security application to modify system settings, since it will bring some troubles.
Kate Li
TechNet Community Support

Similar Messages

Windows EventViewer Errors and Warnings

I am new to this company and have been asked to work initially to assist our Application Group with their concerns over some applications suffering performance problems. I interviewed the Group Supervisor and he has indicated that he would like me
to review "all" errors and warnings in the EventViewer Logs and rule out any errors and warnings that "may" cause issues for his applications on the servers. His objective is to rule out O/S and hardware errors and warnings by having
me review all daily errors and warnings and solving them, if they are related to O/S and hardware. By doing this, he feels that the other errors will indicate that he needs to address them from an application point of view.
I explained to him that this will be too consuming and not practical as there are over 300 servers to address. Instead, we need a tool or application that can provide alerts on specific events that we have determined warrant reviews. I explained
that many of the errors and warnings he has seen over the last month "may/and probably" was a result of conditions that are not currently within my control (due to budgetary limitations that don't allow us to purchase optimal hardware, bandwith,
power protection services, etc). For example, we recently encountered severe weather conditions that affected the power to our Data Center. These conditions caused latency and power fluctuations that were recordedin the Event Logs. The errors
and warnings during this time eventually went away when weather improved. Unfortunately, this explanation did not suit him.
So, I am left with a problem. I need to satisfy his request since he is a high level supervisor. I will , therefore, need to identify a solution and I believe that may be an application that will give us the ability to selectively identify
events in the EventViewer Application and System logs and alert us within threshhold limits when those events occur. We can then determine which event is "chronic" and then we can filter most of the events to just a few to be concerned with
and then we can devote time to solve them.
Is there anything out there that can do this for us? I'm thinking of something like SolarWinds NPM and APPLICATION Monitoring.....or, something like that. I don't even know if Solarwinds products can provide what we need.
Thanks in advance

Hi,
To add, regarding System Center Management Pack, please take a look at the WIKI article below:
System Center Management Pack Authoring Guide
http://social.technet.microsoft.com/wiki/contents/articles/15251.system-center-management-pack-authoring-guide.aspx
Hope this helps
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...

Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s), 0 warning(s) ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s), 0 warning(s) ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
PS CS6，Please help！

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Flex build errors and warnings not in English but in Dutch

Hello Flash Builders,
I'm using Flash Builder 4 beta and both Flex SDK 3.4 and 4.0 beta 2. The problem I have is pretty annoying. Many error and warning descriptions, which you see in the "Problems" pane in Flash Builder, are in Dutch. Why? I do not know. I never told it to and I can't find anywhere in the settings an option to change it. I did not download the Flex SDK in Dutch, if that's even possible. Unless they forced me to, because they found out I live in Holland I think I would like Dutch compile error descriptions.
Though I am Dutch, most of the time the Dutch descriptions are fare more difficult to understand than the English versions. And looking up an error when you don't know what it means is also pointless, cause the most common language on the net is ofcourse English and not Dutch.
Someone knows how to change the language of the compiler error and warning descriptions?
Any help would be great!
Many thanks.

Hi,
DBNetLib (Database Network Library) errors occur when the BizTalk Server runtime is unable to communicate with either the MessageBox or Management databases. When this occurs, the BizTalk Server runtime instance that catches the exception shuts down and
then cycles every minute to check to see if the database is available.
Check if there is any server restart activity happening every night?
Alternatively, you might need to
Set the SynAttackProtect registry setting as described in
http://support.microsoft.com/kb/899599. Additionally,
look at the Group policy for that SQL server to be sure that the Group Policy does not periodically UNDO the setting change that you did above.
Refer:
[DBNETLIB][ConnectionWrite (send()).]General network error. Check your network documentation.
Other possible causes could be
1) Low hardware specs (Could be hard disk memory issue, check the free space on the server)
2) Sharing one server or disk for more than one group of BizTalk databases
It could also be a network card issue that could we worked around by turning off TCP Chimney using the following command:
Netsh int ip set chimney DISABLED
For more information, see
Microsoft support article 942861.
Refer for details:
Avoiding DBNETLIB Exceptions
Similar issue reported here ->
BizTalk service stopping automatically.
Also refer this link and look into the description of Error 6,10 and 11.
BizTalk - Errors and Warnings, Causes and Solutions
Rachit
Please mark as answer or vote as helpful if my reply does

Event Viewer errors and warnings

How do I clear Event Viewer errors and warnings?

This one may help.
http://technet.microsoft.com/en-us/library/cc722318.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Errors and warnings that came up after Master collection CS6 finished installing.

Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF012, DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 3 warning(s)
----------- Payload: {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1 -----------
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "E:\Adobe CS6\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
I'm guessing the reason Microsoft Visual C++ 2010 didn't work was because I already had it on my machine.
The language pack and the switchboard warnings I don't know what to do about. Any chance you guys can tell me if I'm missing something?
James McGill

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW042 ... WARNING: DW066 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s), 2 war

Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW042 ... WARNING: DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {FA19351D-E98C-48C1-B5E1-0C8C42B5E11C}
WARNING: DW066: OS requirements not met for {F7FD5B5C-CE79-4657-AEB7-B0EE4626C912}
ERROR: DW042: ARP Entry couldn't be created for language : en_US
What the heck does this mean???

Trying to install Photoshop Elements 11 on Mac OS 10.6.8 with Quicktime 7 also installed. Machine is 21.5" iMac 3.06GHz Core 2 Duo. It was on there before. Had a problem and threw it out to reinstall. Any attempt at reinstall gets same error. Even downloaded the installer from Adobe's site and get same error.

Error code Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW016, DW036 ...

can any one help? I am getting the following message when installing illustrator: Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW016, DW036 ...

Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Mylenium

SLIN Error and warnings

Dear Experts,
I have created table maintenance generator for my custom table that generated two function module and necessary includes.
I am getting Obsolete Statements EPC (SLIN) Error and warnings due to the auto generated includes in my function group while checking the extented program check.
I could not reduce the EPC errors and warnings because that referring the register object.
Could you please give your suggestion to reduce the EPC Errors and warnings?
Thanks in advance.
Warm Regards,
Sivakumar.A
Edited by: Sivakumar Arumugam on Oct 11, 2008 12:59 PM

Dear Deepak Paramashetty,
I did not get any problem ignored the warnings no other way.
Regards,
Sivakumar.A

CS6 Setup Errors and Warnings

After running set up I've received the following errors and warnings:
Error:          1310.Error writing to file: C:\Windows\Installer\d7e50.msi
Error:          Install MSI payload failed with error 1603 - Fatal error during installation
MSI Error:     Error 1310.Errow writing to file: C:\Windows\Installer\d7e50.msi.
Warning:     DF054:Unable to read Adobe file version for file pateh 'C\Windows\Fonts\KozMinPro-BOld.otf' (Seq 39)
Error:          DF012: Unable to find file (Seq 39)
Warning:     DF054: Unable to read Adobe file version for file pateh 'C:\Windows\Fonts\KozMinPro-Heavy.otf' (Seq 41)
Error:          DF012: Unable to find file (Seq 41)
Error:          DF050: The following payload errors were found during install:
Error:          DW050:     Microsoft_VC90_CRT_X86: Install failed
Error:          DW050:     Mircosoft_VC80_CRT_X86: Install failed
Error:          DW050:     Adobe Mini Bridge CS6: Install failed
Error:          DW050:     Adobe SwitchBoard 2.0: Install failed
Looks like I've been shot down---I've tried to run set up a second time--same results. Any suggestions??
Thanks, Randy

First you should make sure your system is capable of running CS6. Then try to run the CS cleaner tool to remove anything around from trials, beta versions, or failed installations.
http://www.adobe.com/support/contact/cscleanertool.html
Then try to re-install.

Administrative Events Errors and Warnings

I was made aware of a problem with my computer with regard to Administrative Events, which indicates almost 13,000 errors and warnings accumulated since I purchased this computer almost 2 years ago. How can I correct these problems? I can provide any information
necessary. Thank you.
Paul Mellett
[email protected]

Hi Paul,
Are these errors related to SharePoint 2013 Search? As this forum is only for SharePoint 2013 Search, if your issue is not related to SharePoint 2013 Search, I suggest you create a new thread on the proper forum for help.
The forums below may be useful for you:
Windows 7 IT Pro
Windows 8 IT Pro
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Errors and warnings Summary during CS6 installation

Received 5 errors and 19 warnings during installation of CS6 - is there something I need to do even though it says installation is complete? I had CS5 Creative Suite on my computer already.

check your install logs: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

Table for Errors and Warnings

Hi,
I know that we have SNP_CHECK_TAB as the Error table which logs in the summary of errors and E$ that logs in all the errors. But do we have warnings logged in any table? Does anyone know..? Is there a better way to capture the Errors (in the package that runs several interfaces..) apart from the E$ tables.
1) I want to log the error tables by interface..
like
table_name Errors Warnings
table a (interface1) 10 errors--- 2000 warnings
table b(interface2) 0 erros 0
table c(interface3) 100 4000
Can anyone suggest?
Thanks
Venkat

Have you looked at the SNP_SESS* tables? I think you can get anything that is displayed in the Operator from these tables.
Hope this helps!
Michael R.

Export all Errors and warnings event logs from Application, security and system for last 24 hours and send it to IT administrators.

Dear Team,
I want a powershell script to export servers event logs into excel and it send that file to IT administrators.
Excel format:
Server Name, Log Name, Time, Source, Event ID and Message.
Require logs:
Application, Security, System, DFS Replication and Directory service.
And these excel file has to be send to Email address.
And it would be good, if i get a script same for Hard disk space and RAM and CPU utilization.

Here are some examples:
http://gallery.technet.microsoft.com/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=logs&f%5B0%5D.Text=Logs%20and%20monitoring&f%5B1%5D.Type=SubCategory&f%5B1%5D.Value=eventlogs&f%5B1%5D.Text=Event%20Logs
¯\_(ツ)_/¯

Process chain - errors and warnings

Hi,
I have a process chain that does a full update to an ODS and then a delta to cube, and repeats the same for a similar set of ODS/Cube. In effect it is like
>Load ODS1>LOAD ODS2>Load CUBE1>LOAD Cube2.
It gives me some warnings in syntax check - as below -
- <i>There must be a type "Update ODS Object Data (Further Update)" process behind process "Activate ODS Object Data" var.ZPAK_41PK2ZKDVH74AO6TKHS4LGFMJ in the chain</i>
I had removed the 'further process' step that was automatically inserted for the ODS load infopackage (have not removed the ODS activation step, it is there after the ODS load).
- <i>No type "Activate ODS Object Data" process allowed infront of process "Execute InfoPackage" variable ZPAK_41IKQ9UMLX46YDBPJRK3MXB17 in the chain</i>
This warning is for the step load to 2nd ODS after the first ods activation.
I ignored these warnings, and scheduled the process chain. It loaded to the first ODS alright, and failed in 'ODS activation' step. The error was - The 'QM' status of request xxx must be green before activation (from job log).
I thought the ODS load completion before the activation would have the QM status set to green (as the load did go successfully), and it was green when I checked the request.
Can you tell me
- What really is the meaning of those warning messages above, and,
- Was this error due to anything wrong I might have done in process chain definition and/or execution?
Thanks,

Hi,
Want to know few more things apart from what you mentioned.
Is this what u want to mention ?
R/3-FULL-> ODS1 -DELTA-> Cube1
R/3-FULL-> ODS2 -DELTA-> Cube2
And you have this in your PC.
R/3-FULL-> ODS1, R/3-FULL-> ODS2,-DELTA->Cube1,-DELTA-> Cube2.
I hope I have understood this rite.
Well is there any link or relation or lookup between the ODS's & Cube's ?
By default whenever you include a ODS Loading InfoPackage in PC, it gives you 3 more processes, provided the ODS has a Data Mart in the system.
Here as mentioned that you have a Cube being loaded in ODS. Since you have removed the Further Processing Step, that means that PC standards have been violated. Hence it is giving you a warning.
Can you tell me where are the ODS activations steps ?
I would suggest you to make the PC this way.
R/3 -FULL-> ODS1 -ODS1Activation-> Further ProcessingODS1 -DELTA-> Cube, R/3 -FULL->ODS2 -ODS2Activation-> Further ProcessingODS2 -DELTA->Cube.
Here either you can include a Further Processing for a ODS /OR/ Include the InfoPackage for Delta Loads.
Hence whenev You load ODS make sure the ODS Data is first activated and then either via Further Processing or Infopackage load Delta to the Cube.
I hope I was clear over it, if you have any Q then please reply.
Hope it helps,
Pradip Parmar

Eventvwr logs over 6200 errors and warnings

Similar Messages

Maybe you are looking for