Ever since i loaded Xl I cannot print and get the message "Prop Res DLL no loaded"
Ever since i loaded XI, I can't print and get the message "Prop Res DLL not loaded?
You get this when doing what?
Try reinstalling or updating your printer driver.
Similar Messages
-
Since I've updated Firefox when I try to print off a web page and use properties I get error message, Prop Res DLL Not Loaded. never had that problem before and it don't happen on Internet Explorer.
Do you have a Lexmark printer?
*[[/questions/816793]]
Copy the Lexmark printer DLL file(s) (LX??PRPR.DLL) from the C:\Windows\System32\Spool\Drivers\W32X86\3 folder to the System32 folder -
I print shipping labels through Paypal, I want to print just in black ink, but when I use the Lexmark properties to change the printing to just black, getting message Prop Res DLL not located. Spent some time with Lexmark Chat to try and find out what I needed to do to fix this. As they walked me through a couple of things to try, one was to go to Internet Explorer, found I could do the necessary printing, with no problems of getting that error message. So it appears the problem is with Firefox 4.3
See this thread: <br />
https://support.mozilla.com/en-US/questions/816333?s=Prop+Res+DLL+not+located&as=s
Surprising that Lexmark wasn't aware of a problem with their drivers that is not exactly new, or restricted to Firefox. <br />
http://support.microsoft.com/kb/918730 <br />
http://www.proz.com/forum/office_applications/30138-error_message_prop_res_dll_not_loaded_in_word_how_can_i_fix_this-page2.html <br /> -
I cannot print, I get the message "The printer is busy".
Suddenly I am having trouble printing. I have an HP Photosmart printer hanging off my router, and out of the blue the printer was offline. I've this trouble in Windows but never on the Mac. I deleted the printer, and added it. When adding the new printer instance, the system could not communicate with the printer to verify it's presence on the network. I opened the printer utility, and the printer was present, and could print a test page. However, ever time I try to print from an application, the job just sits in the queue, and the message The Printer is busy displays in the print window.
You get this when doing what?
Try reinstalling or updating your printer driver. -
My printer is a Lexmark Z705.
I just had the same problem w/ a Lexmark X1185. MicroSoft web site gave me this that worked:
To work around this problem, use one of the following methods.
Method 1: Copy the printer driver files to the System32 folder
To copy the printer driver files to the System32 folder, follow these steps:
In Windows Explorer, locate the following folder:
drive:\Windows\System32\Spool\Drivers\W32x86\3
Press and hold CTRL, and then click each printer file.
Note Each printer driver file has a file name that resembles the following:
lx**prpb.dll
lx**prpr.dll
dl**prpb.dll
dl**prpr.dll
Note ** is a two-letter designation that is associated with the printer.
With the printer driver files selected, right-click the files, and then click Copy.
In Windows Explorer, locate the following folder:
drive:\Windows\System32
Right-click the System32 folder, and then click Paste. -
no more to add
Copy '''LXBCPRP.DLL''' to the following location: '''C:\WINDOWS\system32\spool\drivers\w32x86\3 '''
See also: http://support.microsoft.com/kb/918730 -
Since downloading iOS 7, I have been having trouble purchasing music from iTunes Store. When ever I try to make a purchase I always get the message "Your account is not valid in the US store" As I am new at this I don't know what I can do to remove this problem.
What country are you in ? If you aren't in the US and the address on your account isn't in the US then try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select your country.
-
Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks
Could this be a virus?Hold down the Power button until the computer shuts down.
The Safe Mac » Adware Removal Guide - Genieo
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
i cannot install adobe reader. I get so far and get the message "Error 1324. All folders or the volume is invalid. Please enter it again" can you help?
We need to know if any registry settings are causing this error. Please follow these instructions:
from Windows Start | Search: type regedit and hit Enter; you will see a window like this
now click on the little arrow ▹ left from HKEY_CURRENT_USER
Next click the arrow ▹ beside Software, then Microsoft, then Windows, then CurrentVersion, then Explorer, then click on User Shell Folders
all entries on the right side should start with %USERPROFILE%
If you have anything different, this may be the cause for the install failure.
Now you need to repeat the same thing for another key:
▹ HKEY_LOCAL_MACHINE ▹ Software ▹ Microsoft ▹ Windows ▹ CurrentVersion ▹ Explorer ▹ User Shell Folders
Here all entries should start with %PUBLIC% or %ProgramData%. If you have anything different, this may also be the cause for the install failure. -
Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?
i have that quicktime problem too
-
When I try to print I get the message -rasteroescpll quit unexpectedly
when I try to print I get the message -rasteroescpll quit unexpectedly
Hello, might try this...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard
When I try to use it to make pdf files I get the message "Missing PDFMaker files
It is a proper copy with serial numbersMoving this discussion to the Acrobat Installation & Update Issues forum.
-
After years of no problems I sddenly can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable. What are themes? How do I install them? Why has this problem suddenly arisen?
Re-installing does not affect your Library in any way. You don't delete it, only the app.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
Regards
TD -
When printing an email & selecting printer properties window to change printing color,error message is displayed. "Prop Res DLL not loaded." Never had this problem until 4 months ago. Lexmark tells me it is a Firefox problem, not a printer problem.
Seemed to occur after a Firefox update?See this [http://www.google.com/search?q=Prop+Res+Dll+not+loaded&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a Google search] for a "fix".
Here's a Firefox bug that was filed a few months ago. <br />
https://bugzilla.mozilla.org/show_bug.cgi?id=649128 <br />
Looks like a problem caused by Lexmark print drivers doing a strange installation (Lexmark makes some of the Dell branded printers). Mozilla isn't going to revert the way Firefox looks for print drivers due to security concerns.
See if you can follow the fix posted here: <br />
https://support.mozilla.com/es/questions/816333 -
Printing to Adobe PDF printer and getting the same document, possible??
Hello:
I need to split a page A4 into 2 pages, it's possible using print, then tile large pages, the problem is that my original document is black and white, but the generated one has a shades of gray visible when zooming to 800% (and the size is much bigger), so my question is:
is it possible to print a document to Adobe PDF printer and getting exactly the same document?? same size, same black and white
I'm using acrobat6I suspected as much. I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected. I only installed the local printer to see if the RDP session
tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer. I am disappointed but not surprised.
Edit:
Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
to “Disabled” but
with no luck. In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether. I have concluded that this approach will not bear any fruit.
Maybe you are looking for
-
How many computers can you install Logic Express 8 on?
Do they offer a family pack or do you have to buy one for each computer?
-
How to add a new printer and laptop to my home network
Greetings, Need tech help. I have 2 issues going on. First I am trying to add a 2nd Printer to my home network. I was given an HP 4050N printer. I want to add it to my home network. My main printer is an HP Photosmart 8450. It is attached to my deskt
-
Hello all, first of all thank you for reading this post. Please bare with me, I am new with this environnement. I have had several problems in past week trying to configure a local sharepoint server 2013, most of it went well but now I am stuck and I
-
So, I breezed into a store and saw the new iMacs and being a PC guy for years (Dells) I decide its time to see what all the fuss is about. Well, when I seee the new iMacs on the shelf I lose all self control and pay cash for mine with all the bells a
-
Solaris 8 x86: Problems with VNC
I have installed Solaris 8 x86 on my "slave PC" and now I want to access it remotely from my "master PC". The networking runs well so far. Ping, telnet, and internet access are all possible. Now I have installed the tightVNC 1.2.9 package on the Sola