Ever since update, my torch will not send bbm's to any Z10 users

I updated the latest version on my bb and now it takes forever to send a bbm.  Also, I can receive the messages from Z10 users, but cannot send anything to them.  No bbm messages will go through. 

I fixed it by doing this response to another post......and it worked!
Re: bbm won't launch after update
Hi ,
If you’re having problem in locating then try to reinstall BBM again .
To do that first On your Homescreen Go to Options > Device Application Management > Locate and delete BlackBerry Messenger from there.
KB10040  :  How to view or remove installed application on a blackberry smartphone
After deleting perform  a Battery Pull Restart by removing the Battery while your device is  Powered On ,wait a min. then re-insert it back .
After reboot use your BlackBerry browser and browse to www.blackberry.com/bbmdownload  and download  the most recent available for your device .
Try it and let us know.

Similar Messages

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • My iPhone 5 will not send mms through iMessage, any help?

    I have recently been abroad and since returning to the UK, my phone will not send pictures over iMessage, I never had this problem before travelling. I have my wifi switched on and I have checked my send and receive settings. I can receive picture messages through iMessages but cannot send them. The person I am sending them too has an iPhone and has their iMessage turned on, I have checked my updates and my phone does not need updating, I can not think of anything else it could be. I have also checked and I am able to send them through text just not iMessage. Any suggestions would be great!

    Yes I have turned imessage off a number of times and that does not seem to he doing the trick, and it is not delivering them then I have to press on the photo and either chose try again or send as text message, I have had the setting on to not allow sending pictures as texts (so they can only send as imessage) since I got my phone in January and it has always worked until now, I have turned that off to allow me to send them as picture messages now but it's still not working over iMessage, I have also tried it using 3G and not wifi

  • Mac Mini will not send iMessages to anyone but apple users all other devices will

    I have a new mac mini and it will not send iMessages to people that do not have apple devices.  All my other apple devices will send to people on these devices.  The mac mini says that the users are not registered with iMessages.  My Macbook Pro has no problem.  Any suggestions?

    Hello IslandBoy2671,
    Is your MacBook Pro sending the SMS messages through your iPhone?
    That is the protocol others are probably using.
    Messages (Yosemite): Get and send SMS messages
    To make and receive SMS and MMS messages on your Mac, you need an iPhone with iOS 8 that’s signed into iMessage with the same Apple ID.
    To send an SMS message, enter a contact or a person’s phone number, enter your text, then press Return.
    Your SMS and MMS messages appear on your Mac automatically.
    Take care,
    Nubz

  • Since updating yesterday iTunes will not open/sync/recongnize my iPhone. No error messages, ive tryed un/re-installing it but the same thing occurs.. Anyone! Please can you Help? Thank-you

    HELP!!  my iTunes will not respond to connection via usb, it does not reconize it or sync it, no purchased,  wont re-charge etc, when it used to work Yesterday
    and i did an update... ive tryed un/re-install and its the same problem... how ever on my other computer its fine...... Please HELP !! Thank-you

    Hey!
      Glad to hear that you and your family made it through relatively unscathed!  I think we all need to take better care of our wonderful planet, because I think we are upsetting Mother Nature! 
      I have the Windows Installer Clean-Up screen up and tried to upload a screen cap for you, but IE immediately shuts down every time I try.  So I'll have to transcribe the screen for you:
      I see the following:
    (All Users)
    (All Users) [1.2.0.10]
      Those are the top two lines.  The following lines after that are programs he has installed on the machine like Acrobat, Adobe, Autodesk Inventor, and such and they all have a name and program number in brackets.
      And I now again have the obligatory Apple programs installed and listed again:
    (All Users) Apple Application Support [1.5.1]
    (All Users) Apple Mobile Device Support [3.4.0.25]
    (All Users) Apple Software Update [2.1.2.120]
    (All Users) Bonjour [2.0.5.0]
      Please note that iTunes is NOT LISTED.
      Everything else 'appears' to be normal, I'd say.
    Take care, and I'll see you on the flipside!  According to my clock, it's 4:11am Thursday morning there!
    See ya!
    - Austin 

  • I get a download error in iTunes store for purchased items since update.  It will not download the items waiting.  How can this be fixed?

    Since latest update, I get a download error message for 25 songs that are waiting to download.  It says to "tap and try again" but still does not download.  How can I get them downloaded?  They are showing in my iTunes on PC but not on phone.

    The problem is with facebook, go to settings / facebook / your user name and delete your account, the do a hard reset (home+power for some seconds).
    dont need to delete the facebook app! just delete your integrate account from settings
    cheers!

  • Since update, will not send or receive picture messages unless using imesage

    Since the I0S6 update, my phone will not send or receive picture messages unless it's being sent through iMessage.
    I know of other people having the same problem, with different versions of the phone and different carriers.
    Anyone else?
    I have the iPhone 4 with Sprint.
    Friend has the iPhone 4s with Verizon.

    Check settings/message and make sure MMS is ON.  Also chcek that your carrier/your plan allows sending of pictures over MMS

  • Iphone 5s will not send imessages after update

    I updated my iPhone 5s to the newest IOS 7.1.2 and since that time it will not send imessages to anyone.  I have powered off and on.  I have reset the settings.  I have checked to make sure that messaging is on.  I have turned off messaging and then turned it back on.  It was working just fine prior to the update.  Anyone know how to fix this??
    Thanks!!

    Hello marybethcolc,
    It sounds like you are unable to send iMessages after a recent update despite some great troubleshooting. I would use the following article as a guide to help you get that issue resolved, named:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • TS2755 Since updating my iphone to ios7 my phone will not send or receive imessages. Please help?

    Hi there,
    Can anyone help? Since updating my iphone to the latest ios7 my phone will not send or receive imessages and is now very slow.

    Go to Settings>Messages> turn iMessage off. The go to Settings>General>Reset>Reset all settings. Do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, go back into Settings>Messages and turn on iMessage. See if it activates.
    Apple has acknowldged an issue with iMessage and is working on an update. Look for that to be released sometime this week.

  • Okay since last apple software update my safari will not open youtube,yahoo or google

    Okay since last apple software update my safari will not open youtube,yahoo or google, an error message comes up saying safari cannot connect to the server.  Can anyone help me with this please?

    Hi Joshua ..
    Check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari to test.
    If that wasn't the issue, try using OpenDNS.
    Use OpenDNS for better speed, more security, prevents the, "can't connect to server" issue, includes anti phishing filters, prevents browser re directs, and it's free.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these addresses exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    More about OpenDNS here.
    Topic : Manually provided DNS server addresses are higher priority than DHCP's

  • TS1363 Since the last iTunes update my iPod will not connect to iTunes

    Since the last iTunes update my iPod will not connect to iTunes. My computer recognizes it but as soon as I launch iTunes I get the error message: An iPod has been detected, but it could not be identified properly. I have done ALL troubleshooting steps and it still gives me the error...... this only happend since I updated iTunes.

    Doublechecking. Have you also worked through the following troubleshooting document?
    iPod nano: Error message saying that iPod 'could not be identified properly'

  • I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    http://support.apple.com/kb/TS1538

  • MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • I updated our iPad a week ago to 8.1 (12B410) and since then most apps will not close down with the 4 fingers swiping in.

    I updated our iPad a week ago to 8.1 (12B410) and since then most apps will not close down with the 4 fingers swiping in. The only way to close them down is to hit the middle bottom button twice then swipe upwards. Is anyone else having this problem and how do I fix it?

    This has been happening to me as well with an iPad 3 running iOS 8.1. This is what I do and it works for me. Toggle the setting for Multitasking Gestures off and then on again, Settings>General>Multitasking Gestures>Off. Then toggle it on again.
    I have to repeat the sequence from time to time as I have not found a permanent fix. I think that iOS 8 is by far the buggiest iOS release that I have used since I have owned an iOS device.

  • I have an iPhone 4 and recently updated the software.  Since then, the screen will not turn off after the 1 minute autolock.  How do i fix this?

    I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock.  How do I fix this?

    Settings>General>Auto Lock

Maybe you are looking for

  • Error -6753 airport on pc with windows 8.1

    hi! I was getting error 10057 and I fixed it with disabling IPTCP V6 but now im getting error -6753. any ideas. Thanks.

  • Change the Default Page Size for WebI

    Hello Experts, We have requriement where we need to change the default page size and margins for WebI, I have change the page size in defaultconfig.xml but don't see any options for Margins, How do I change the default margins? Any help or suggestion

  • Embeded forms and form responses. Several questions

    I am trying to set up some forms for our clients to fill out so that they can pass on some project specifications to us. I have not set up the web side of things but essentially I want clients to log into our website and be redirected to a their spec

  • BeforeReport trigger not firing

    I'm sure I'm just not using this right, but I can't for the life of me figure out how to get a simple beforeReport trigger to fire. I've created a function that just inserts in to a test table to see if it's working, and then returns a true. I've set

  • How to make a copy of a query?

    We can't find contex menu item to make a copy of a query when right clicking a query and can't find any picture icon/button to make it.  If someone can tell us on how to do it? Thanks