Ever since upgrading to v5, most of the time, I am unable to get Firefox to start.

I have upgraded to Firefox v5 and now, most of the time, it will not start. I can see Firefox added to the process list each time I click on it, but there is zero activity against the process. I am able to bring up IE so there is no problem with my internet connection (I am having to use IE to enter this note....). Once in a while after a reboot, Firefox will start, but even then it is unstable (may or may not stay up).

Have you tried to restore your iPhone:Use iTunes to restore your iOS device to factory settings - Apple Support. You're supposed to restore it to make sure it is not the problem cause by the operating system. After then, you can contact apple for support: http://www.apple.com/support/contact/. Apple will either repair the phone for you or replace it with a new one.

Similar Messages

Ever since I downloaded FF4, most of the time I can't open messages in Hotmail.

Or in my junk mail.

Try running Firefox in [[Safe Mode]]. If it works in that configuration, then one of your add-ons is the cause of the problem.
P.S. ''Sorry it took so long to respond to your question''.

Since upgrading to Snow Leopard yesterday, twice I've been unable to get my screen saver to release back to my working desktop. Anybody else have this issue?

Since upgrading to Snow Leopard yesterday, twice I've been unable to get my screen saver to release back to my working desktop. Anybody else have this issue?

For a few users, since some point in OS X 10.6 Snow Leopard, there has been an occasional problem when trying to wake from sleep if you have Bluetooth enabled for the keyboard, Magic Mouse, Trackpad, etc.
The solution for me that worked 100% of the time was: System Preferences>Energy Saver and set 'computer sleep' to 'never'.
For me, the problem ran intermittently through 10.6.something, all of 10.7 and now, finally, seems to be resolved in 10.8.2.

When making or receiving calls on my iPhone 4, I can hear the person on the other end, but they can't hear me. This happens most of the time, but occaisionally, it works! Sometimes it starts during the call...Can you help me?

Infos:
IPhone 4, 32 GB
IOS 7.1.2
Problem:
Videos, memos and other sound microphone using applications work without any problem. It just appears when calling or being called. Sometimes it starts during the call.
Situation:
I sent my damaged IPhone 4 to apple for reparation. I bought it for 180 € + 20 € for my retailer.
Some calls later this problem started (only at the new or repaired IPhone). My 3 month warranty is almost over (4 weeks left)
Steps to solve the problem:
- rebootet the IPhone several times
- made a backup (iCloud and ITunes) and recovered it again
- I set back all settings to standard.
--> Nothing changed
Then I went to my retailer, who sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Started at the second call I received. Now the warranty time is going to run out in 4 weeks.
Open Questions:
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed. Do they want to cheat me, so my warranty runs out? Thanks for any help

I have the same problem.
IPhone 4
IOS 7.1.2
My retailer sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Now the warranty time is going to run out in 4 weeks.
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed.

IOS 7.1 Upgrade - home button double click not working most of the time

Hi,
Not sure, if anyone else had encountered this issue after upgrading to iOS7.1.
I am using iPhone5S 32 GB and it was working fine with home button (double click, mostly used to see & close other applications running in background) till I upgraded to iOS7.1. After iOS7.1 upgrade, most of the time, I am unable to see running applications. After trying for 4-5 times, I managed to see running application
Is there any fix or workaround for this issue?

Settings > General > Accessibility > Home-Click Speed - Change from Default to Slow

Ever since upgrading to Lion I keep getting the error message "disk was not ejected properly."

Ever since upgrading to Lion on my iMac G5 Intel Core 2 Duo, I keep getting the error message "disk was not ejected properly." I have repaired permissions and reformatted my external LaCie 2TB USB hard disk, but the error continues. I use this disk for my Time Machine backups. This always seems to happen when the computer wakes from sleep, but not consistently. The computer was asleep overnight and backed up as soon as it awakend this morning. Two hours later I get the improper ejection message. I have used the same external disk with Snow Leopard (all versions), but never had this error message or problem. This disk has been in use without any problems since February, 2011. Upgrading to Lion is when this problem began. This is the below message (but from online image from Snow Leopard, but Lion message is essentially the same).

I had a similar issue. Mine was with a Seagate GoFlex drive. The solution was to install GoFlex for Mac 1.1.2 which included a 64-bit driver to disable the drives built in sleep timer:
http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=goflex-mac-install-softw are&vgnextoid=77002aaf8cc5d210VgnVCM1000001a48090aRCRD
I document how I discovered this in my blog post:
http://www.innerexception.com/2011/10/tale-of-computing-misery-how-to-fix.html

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My text notification light no longer works now since the Lollipop upgrade. How do I get it back since i use my phone in silent mode most of the time?

My text notification light no longer works now since the Lollipop upgrade. How do I get it back since i use my phone in silent mode most of the time?

We want you to love your software update pitbullmommy71! When did you update your phone? Have you tried going into phone settings and set up your notifications as you would like them? It can take a few days for your phone to normalize after the update, but this may be a bit much. Some apps may no longer be compatible with the new software so you can try running phone in Safe Mode or do a Hard Reset to see if this improves your phone. I've seen where some have completed a Hard Reset after the update and downloaded all same apps, and phone works flawlessly now. However, if you'd like to try Safe Mode first, (which is where all 3rd party apps are disabled), you can certainly try this for 24 hours to see if improves.
Safe Mode: http://vz.to/1i0XGEW
Hard Reset: http://vz.to/1GrhWqy
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Ever since upgrading to Lion my iMac opens to a different admin than the one last used and has to be switched. How can that be changed?

How can I change which user boots at start up? Ever since upgrading to Lion X my iMac no longer opens to the user on it prior to shut down. It now opens to a user who is virtually never on - which is actually me under a different name. This division of my Mac happened when I switched to my new Mac and didn't know I had to use the same name to transfer my data. My old data is listed as a separate user. Over time my old user name brings up a window full of ???? at the bottom. It looks like no apps ever upgrade there. It is driving me crazy to have to now switch back each time I start my computer. (I am using an iMac with 3.06 GHz Intel Core 2 Duo processor).

How can I change which user boots at start up? Ever since upgrading to Lion X my iMac no longer opens to the user on it prior to shut down. It now opens to a user who is virtually never on - which is actually me under a different name. This division of my Mac happened when I switched to my new Mac and didn't know I had to use the same name to transfer my data. My old data is listed as a separate user. Over time my old user name brings up a window full of ???? at the bottom. It looks like no apps ever upgrade there. It is driving me crazy to have to now switch back each time I start my computer. (I am using an iMac with 3.06 GHz Intel Core 2 Duo processor).

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Hi, you can't have a PowerMac, they can't run 10.6, 10.7, or ML/10.8!
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Please help - computer is crashing & freezing ever since upgrade to Leopard

Ever since upgrading to Leopard, my computer has been crashing a lot more. Sometimes it just freezes up. Most recently, I got the gray screen with a bunch of different languages telling me to restart using the power button. Here is the crash report. Can anyone tell me what's going on, and if there's anything I can do to help?
Thanks!
Tue Mar 24 13:00:49 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x0040de14, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000002c0, CR3: 0x0108a000, CR4: 0x00000660
EAX: 0x06745c00, EBX: 0x2e583bf0, ECX: 0x06745ccc, EDX: 0x00000000
CR2: 0x000002c0, EBP: 0x2e583bd8, ESI: 0x04866d00, EDI: 0x06745c00
EFL: 0x00010206, EIP: 0x0040de14, CS: 0x00000008, DS: 0x01880010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x2e5839e8 : 0x12b4f3 (0x45b13c 0x2e583a1c 0x1335e4 0x0)
0x2e583a38 : 0x1a9c68 (0x464700 0x40de14 0xe 0x463eb0)
0x2e583b18 : 0x1a038d (0x2e583b30 0xb6dcfb0 0x2e583bd8 0x40de14)
0x2e583b28 : 0x40de14 (0xe 0x48 0x2e580010 0x140010)
0x2e583bd8 : 0x7474b9 (0x6745c00 0x0 0x0 0x0)
0x2e583c48 : 0x747547 (0x6745c00 0x4866d00 0x9a00780 0x19eb5b)
0x2e583c68 : 0x5db609 (0x4866d00 0x4 0x46 0x136b31)
0x2e583cc8 : 0x5db679 (0x5a30600 0x4866d00 0x2 0x2)
0x2e583d08 : 0x34773463 (0x5a30600 0x4866d00 0x2 0x2)
0x2e583d28 : 0x60b211 (0x5a30600 0x4866d00 0xe0004051 0x1f)
0x2e583d98 : 0x85b117 (0x3c29000 0x3d88900 0xe0004051 0x1f)
0x2e583e38 : 0x85c047 (0x3c29000 0x3e79488 0xe0004051 0x0)
0x2e583e88 : 0x85c1b4 (0x3c29000 0x3e785c0 0xc954252c 0x7f33)
0x2e583ec8 : 0x6078f7 (0x3c29000 0x3e8 0x53f69c 0x3e10a40)
0x2e583f28 : 0x424cb8 (0x3c29000 0x3d68b00 0x53f0c0 0x1)
0x2e583f78 : 0x13eed2 (0x3d68b00 0x3d68919 0x0 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOUSBMassStorageClass(2.0.4)@0x34772000->0x3477bfff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5d5000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x606000
dependency: com.apple.iokit.IOStorageFamily(1.5.5)@0x72d000
com.apple.iokit.SCSITaskUserClient(2.0.5)@0x745000->0x74afff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5d5000
dependency: com.apple.iokit.IOStorageFamily(1.5.5)@0x72d000
com.apple.iokit.IOSCSIArchitectureModelFamily(2.0.5)@0x5d5000->0x5edfff
com.apple.driver.AppleUSBEHCI(3.2.5)@0x851000->0x862fff
dependency: com.apple.iokit.IOPCIFamily(2.5)@0x636000
dependency: com.apple.iokit.IOUSBFamily(3.2.7)@0x606000
com.apple.iokit.IOUSBFamily(3.2.7)@0x606000->0x62efff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBookPro2,2 (Mac-F42187C8)

I'd suggest doing this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi. I believe All my settings are correct. Device is recognized and sync From iPad is possible.

Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi. I believe All my settings are correct. Device is recognized and sync From iPad is possible. Tablet is past warranty, so TechSup won't help. Any suggestions?

Thank you Meta, but I could not get the calendar and contact sync with Gmail to work. Apple support already suggested to use Google or a Windows PC. Maybe I should actually reset and try my old Windows PC. Seriously, ... can this be the solution after a Mac OS update for pure Apple users?

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Ever since upgrading to OS X Yosemite, I cannot view pictures in iPhoto

Ever since upgrading my MacBook Pro to Os X Yosemite, I cannot view pictures in iPhoto, videos neither. Also the screen blinks constantly white. Any suggestions please to solve this extremely annoying problem.

accessibility settings but there is nowhere that enables me to reduce transparency?
It is in the Accessibility > Display settings: Klick "display"in the sidebar:

Ever since upgrading to v5, most of the time, I am unable to get Firefox to start.

Similar Messages

Maybe you are looking for