Evernote and HP Photosmart Plus e-All-in-O​ne

Hi everybody,
is there a way to scan directly to Evernote with my HP Photosmart Plus e-All-in-One B210?
Thanky in advance for you reply.

Hi,
You'll find a link here to  a post here with detailed instructions on how to scan directly to Evernote.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • How do I scan from my hp photosmart plus e-All-In-one B210 series printer

    I have a hp photosmart plus e-All-in-one printer and have tried to scan to my Mac 10.6.8 desktop computer.

    You might need to install software from HP for your printer.

  • HT4356 I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1).  For some unknown reason neither one can now print.  I keep getting a message that the printer is no longer avail

    I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1).  For some unknown reason neither one can now print.  I keep getting a message that the printer is no longer available.  My MacBook continues to print ok.  Any ideas?

    Reboot everything.  Router, printer and pad.  If it used to work, it will again.  It just lost itself somewhere.

  • Not Able to Find Drivers for HP Photosmart Plus e-All-in-One Printer B210e

    I have an HP Photosmart Plus e-All-in-One Printer B210e.  I went to try and get drivers for it and I either get a page that says
    404 Page Not Found
    Try going back to Support Home
    The other page I get when I look for drivers is for HP Photosmart Plus e-All-in-One Printer series - B210 and I click on Software and Driver I get window on the screen to select my model.  The models listed are B210a/B210b/B210c.  B210e IS NOT LISTED.  Where are the B210e drivers.
    dv6500t (Windows Vista SP2 x86)/dv7-1275dx Windows 7 Home Premium SP1 (x64)/HP Photosmart Plus e-All-in-One Printer B210e/MacBook Pro (Mac OS X 10.7.5/Windows 7 Professional (x64) SP1)

    Hi
    Try http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-3/PSB210_1315-1.exe
    The installation is also possible with HP Printer Install Wizard for Windows:
    http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe

  • Control Panel on HP Photosmart Plus e-All-in-One Printer - B210

    The touch screen control panel on my HP Photosmart Plus e-All-in-One Printer - B210 has stopped working.  I am able to use the Home button and others around the touch screen, but when I touch something on the screen it will not work.
    Any suggestions?!

    Hi Alloest,
    I see that you're having problems with your printer control panel.  I would take a look at the document below.
    Photosmart B210
    Let me know how it goes.  

  • HP Photosmart Plus e-All-in-One B210a Printhead

    I have the HP Photosmart Plus e-All-in-One B210a. I have not had any issues with it until now. It has barely been used. I just now took all of the plastic off of it. I turned it on and I get a "Printhead Problem" message on the touch screen. I have done everything on the HP support site to try to fix it, and it still didn't work. Please help! This printer is practically brand new. It should be working, not having issues!!

    If it's out of warranty then one option might be to purchase a new printhead at the HP Part Store. The part no. is CN643A. More details in the link below....
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02137878
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP Photosmart Plus B210a all-in-one won't display any networks in the list.

    Hi, I recently purchased a HP Photosmart Plus all in one printer and I've been having trouble with it from day one.
    First off, it won't connect wirelessly.
    It won't display any networks in the list when searched for, it won't take my network details when I manually input them and it won't take any static IP address I've tried from other suggestions.
    Secondly, the print quality is very bad. Streaks and fading are occuring and after using up 70% of my ink trying to sort it out through troubleshooting it's still bad.
    It's extremely important for me to be able to have web access using the printer as all members of my household use it and it'll get fustrating having to car laptops and computers around to print.
    Can anybody help at all?

    Top line says "The wireless radio is not functioning. Contact HP support"
    I take this as a very bad sign and needs replacing?
    The tests I done produce streaks, fading and lines. I printed off two photos, one from a memory card and one from a scan. The memory card produced heavy blocked lines of color and the scan was just dull.
    I'm using a Wanadoo Wireless Livebox and Windows 7 64 Bit
    One other question... is this like a brilliant printer for photos mainly? I'm a Graphics design student and although my final prints are made from home I would like accurate and decent printouts for my portfolios. Should I keep this or go for another one with similar features and better print quality?

  • Adobe Acrobat Pro X and HP Photosmart Plus Scanner

    Adobe Acrobat Pro X and HP all-in-one e-Photosmart Plus B210a
    Mac users (Lion) will discover that they cannot scan to Acrobat from their Photosmart Plus Scanner. This is because Adobe does yet have support drivers for Mac Lion. I'd like to know when Adobe will be providing an update to reslove this problem.

    This was posted in March and still there is no update! Can Adobe please address this issue?
    Thank you

  • I have a : HP Photosmart Plus e-All-in-One Printer - B210a, Problem with latest software update

    I have just installed HP update PSB210_231.exe .  The result is that the HP B210a support software on my Windows 7 Dell PC has suddenly lost a number of facilities including the ability to review the ink levels or to run diagnostics and tests on the printer.
    How can I uninstall or can you provide a fix?

    Hi all,
    Make sure to remove the current software by going to Start > All Programs > HP > HP Photosmart B210 > Uninstall..
    Then go to Programs and Features and remove any remain item of the printer, any item should beging with HP, as well you may see the Read Iris software..
    After uninstalling the software reboot your PC, download and install the updated software version below:
    http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-2/PSB210_1315.exe
    I believe the problem should be resolved,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Photosmart Plus e-All-in-One Printer B210e Does Not Print Through Wireless

    I am using Mac OS X 10.7.3 on a wireless connection. I went to print, HP Utility gave me the following error message:
    The printer may not exist or is unavailable at this time
    It was not being used by anything else at the time. Then 2-3 minutes after I got that first error message HP Utility gave me another error message:
    The printer is not responding
    Then on the printer touch screen display I touched the wireless icon, chose Run Wireless Network Test, and got an error message:
    Load paper into Main Tray.
    The tray had plain white paper (10-15 sheets) in a nice neat stack as far back as it would go. I took the stack just to be sure it was still in a neat stack and put it in as far as it would go and pressed OK on the touch screen display and I still got the same message. Then I decide to turn the printer off using the power button, waited about a minute, and then pressed the power button to turn it on. When I did I got another error message:
    Improper Shutdown
    To avoid damage, use On button to shut down. Do not unplug the power cord or turn off the power outlet to shut down the device.
    How is that an improper shutdown when I did use the power button to turn it off.  Why is it telling me that I need to use the power button to turn it off then back on when I did use the power button to do that.  What is the issue and how do I fix it.  I did not have this issue with Mac OS X 10.7.2, but I do now agter the 10.7.3 update.  As of right now the only way I can print from Mac OS X is using a USB connection.  I can print through a wireless connection using my Windows 7 partition on the same MacBook.  I am starting to think that this printer is not Mac OS X 10.7 Lion compatible.
    I have a Time Capsule (3rd Generation) with the current firmware for it and the current the current AirPort Utility for Mac OS X installed.

    SthrnDixieCowgirl wrote:
    I don't know how to remove and add printers unless I had to format my hard drive for a completely different reason and reinstalled the printer that way.
    To remove the printer, open System Preferences > Print & Scan. You will see the HP in the Printers list. Click on it once to select it and then press the minus button under the Printers list to remove it.
    With this done, click the plus button under the Printers list to add the printer. With the Add Printer window open and the Default view selected, the HP should appear in this view. Select it and the Print Using menu should change to the supporting printer driver. When this happens, click the Add button to complete the creation of the printer queue.
    SthrnDixieCowgirl wrote:
    I have heard other people have issues with 10.7.3 for other reasons and I should have waited until 10.7.4 came out before updating and I didn't and now there is nothing I can do to go back to 10.7.2
    You cannot believe everything you read. For every person that had a problem after installing the .3 update, a hundred more had no problem.
    But if you wanted to go back to 10.7.2, then you can use Time Machine to do this. If you are not using Time Machine then you need to start doing so. At least the update only stopped you from network printing. What if it had stopped you from using the Mac?

  • The LED display on my printer has no lights. I have an HP Photosmart Plus e-ALL-IN-O​NE B210 series.

    The printer works, but must be controlled from the computer.  I am using OS XP.  One day lights were not on.  Then they flashed once when I moved the printer.  I thought maybe it was a cable, but I had a technician look at it and he said all the cables were fine.  Any Suggestions?

    Hi,
    You might try the steps listed in this document for your product.
    Blank Control Panel
    See if this helps.
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • How do I print pictures? HP PhotoSmart plus e all in one B210

    I have been trying to print pictures off my Android phone and my computer and no luck!  I got one off the computer but it printed of regular paper instead of the photo slot even though I chose the photo slot...  It keeps saying that my email was discarded because it looked like spam or was corrupted when sending it from my phone.  What am I doing wrong?

    Hi TequilaRose7,
    Sorry you are having trouble.  Photos that are less then 100 DPI will be discarded with ePrint.  Some Android phones default camera settings are less then 100 DPI. These settings can be changed for future photos taken with the phone in camera settings. (Increase the resolution)  I think the HP ePrint Home and Biz App may work well for you.  Download from the Android Market.  Click here for more information on this free App. 
    Although I am an HP employee, I am speaking for myself and not for HP
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accept as Solution"

  • How do I know which B210 series I have? a,b,c,d? HP Photosmart Plus e-all-in-o​ne B210 series

    Can't find info.
    This question was solved.
    View Solution.

    So i followed your advice to check the underside of the printer and low and behold tilting the printer backwards makes the power plug snap - what an attrocious piece of design this is.  How an earth can you make a connection that is both vunerable and located perfectly placed to break if you tilt the printer.  As an engineer I am gob smacked. 
    I shall think a great deal before I ever by an HP product again.

  • Multifunction printers display menu, photosmart plus e all in one B210 series

    Display menu says there's a memory card error. Unable to use the regular menu or copy. I haven't used a memory card. Followed the instructions in troubleshooting.

    Hi there,
    Try downloading and running the Hardware Diagnostic Utility located here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/h...
    It can fix a lot on its own and if not give a better idea of what is going on. let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Photosmart Plus - Simultaneous USB and Wifi Connection?

    I am looking to purchase the Photosmart Plus wireless All-in-one, and want to connect it to my home desktop computer via USB, and also to my existing wireless network (I already have a router set up) so my laptop can also print wirelessly.  Is it possible to connect one computer to this printer via USB, and also have the printer connected to the wireless network at the same time?
    Thank you!

    Simple answer: Yes it is.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

Maybe you are looking for

  • Reg:special characters are not priniting while selecting the CS language

    Hi All, When I am trying to print in CS language some special characters are not printing. Even when I was trying to create the entries in TTDGT table ,these special characters are not created ( příkazu) here r & i are the special characters. instead

  • Phone recognized, but no connection available.

    I am using Windows 2003 and PC Suite 7.1.60.0 and BT connection. When I boot Windows and start PC Suite it recognizes my phone just fine. Then when I move the phone away from the PC the BT connection breaks - and when I return the phone does not reco

  • Duplicate condition types in processing rebates

    Hi, I have created two rebate agreements in the system right now. Whenever i run a sales cycle the condition type BO01 is used twice instead of once which results in giving discount twice for the same order. Is there any way to avoid duplication of c

  • Formula Variable Customer Exit

    Hi Gurus, I have a requirement where I have to read the one formula variable value ( Replacement path with attribute value ) into customer exit of another characteristic variable . For example : I have one characteristic formula variable called VAR1

  • Subtotal in "document overview" pane in ME21N tcode

    Hi All, Actually we have generate the PRs by MRP run, now while making PO we want to subtotal of the PR on Material number in the "document overview" pane. If possible please revert back. Waiting eagerly. Thanks Pankaj Garg