Everpad not working in KDE?

Can anybody confirm that this works on KDE?
I installed it, but after connecting to my evernote account, cant get anything else.
When clicking on everpad icon, there are only "setting and management" and "exit" options.
On install there was no errors, nor I get errors when launch it from console.
Any help will do, thank you.

HI @rajguruharsh
Thank you for your query.
HP does not support the Linux Operating Systems.
Here is a link to Frequently Asked Questions About Linux (FAQs).
Here is a link to Linux Support that may help.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Dbus/Hal automount not working in KDE

Hi
I have set portmap dbus hal in rc.conf.
In Gnome automount works great but in KDE automount does not work and I don't know why.
Can someone please help?
All I want to have is when I insert cd,dvd,usbstick to have them automount.

Thank you for your reply.
I am looking forward to your next release...

"xsnow" and "xpenguins" do not work in kde.

I notice that running xsnow or xpenguins in kde does not work. Namely, when run in the command line, it fully appears to work, but it does not display any snow or penguins. What is the simplest way to make it display the snow or penguins?

Please post in the InDesign forum. This forum is for sutie specific issues only.
Bob

Screen saver not working in KDE 4.6

I can't seem to get my screen saver to work on my netbook running KDE 4.6.1, I have tried removing all the the user settings for KDE and starting with fresh configs but that did solve the issue. I can go into the System Settings and test the screen savers, in which case they work there, but it does not come on when the system times out, I have it set to five minutes. Could this be caused by a missing package or something needed for the screen saver to work?

desaparecido wrote:Hi, in my case I forgoted to add DBUS in DAEMONS array in /etc/rc.conf , in my case I had only HAL that active DBUS so without HAL not DBUS... so after add manually dbus all works fine, my battery monitor and networkmanager.. good luck
Thank you, it was the same for me. Starting dbus and then restarting KDE fixed everything. I added dbus in the daemon array, so everything should be in place now.
Marking as solved.

AltGr not working in KDE?

I just noticed that the key "AltGr" isnt working for me in KDE. Whats wrong?

reflexing wrote:
Hund wrote:If I press AltGr + 2 nothing happends, I should get a "@".
Acutally, you should press Shift + 2 to get an "@".
w00t?

Cpu frequency scaling not working and hdd powers down

Hi,
I recently made a fresh reinstall on my laptop keeping only my user settings (home directory) but no system-wide settings (/etc).
Now I have the following issues:
1) CPU frequency scaling does not work. KDE's PowerDevil tells me, my CPU does not have scaling capability and when I try to start cpufreq, I get this error message:
# /etc/rc.d/cpufreq start
:: Setting cpufreq governing rules , cpu 0 1Error setting new values. Common errors: [BUSY] - Do you have proper administration rights? (super-user?)ble_governors: No such file or directory
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?
The governor modules are loaded:
# lsmod | grep cpufreq
cpufreq_userspace 2096 0
cpufreq_powersave 942 0
cpufreq_ondemand 7990 0
freq_table 2339 1 cpufreq_ondemand
cpufreq_conservative 9172 0
This used to work out-of-the box with the previous install so I'm a bit puzzled.
2) My hard drive powers down after a few seconds of inactivity, just to power up a few seconds later when it's accessed again. The hard drive never powered down on my previous installation. I do not have any power management daemons running and this behavior starts right after booting the machine, before I log in.
I would like to disable this "feature" since I think it's rather bad for the hard drive's health as well as battery life.
Any ideas?:)
EDIT: Cpu frequency scaling is fixed now, forgot to load the acpi_cpufreq module.:rolleyes: There's still the issue with the hard drive, though.
Last edited by Vortex375 (2010-06-28 14:54:27)

The HDD thing is caused by upowerd, dunno why though.
You can try: hdparm -B 254 <disk device>, but that wont solve the problem permanently, only till you plug and unplug again the AC supply.
you can also try killing upowerd and things will (at least that was the case for me) be alright.
Maybe this is upowerd bug?
Last edited by kralyk (2010-06-29 20:44:24)

KDE applications not working

Whenever I try to start a KDE application( I use XFCE ), I get an error saying that the DCOPServer could not be started and dynamic linking is not working. I dont know if it affects all the applications, but the following do not work for sure. Could someone please tell me how to rectify this? I have a lot of data which I stand to lose
msid ~ $ basket
Dynamic Linking is not working
If you are on BSDDid you specify the correct libc file during installation
Dynamic Linking is not working
If you are on BSDDid you specify the correct libc file during installation
DCOPClient::attachInternal. Attach failed Could not open network socket
Dynamic Linking is not working
If you are on BSDDid you specify the correct libc file during installation
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPServer self-test failed.
kdeinit: DCOPServer could not be started, aborting.
msid ~ $ /opt/kde/bin/amarok
Dynamic Linking is not working
If you are on BSDDid you specify the correct libc file during installation
: cannot connect to X server :0.0
msid ~ $ kile
Dynamic Linking is not working
If you are on BSDDid you specify the correct libc file during installation
Dynamic Linking is not working
If you are on BSDDid you specify the correct libc file during installation
DCOPClient::attachInternal. Attach failed Could not open network socket
Dynamic Linking is not working
If you are on BSDDid you specify the correct libc file during installation
DCOPClient::attachInternal. Attach failed Could not open network socket
DCOPServer self-test failed.
kdeinit: DCOPServer could not be started, aborting.

Please don't cross post. Any help should be directed here:
http://bbs.archlinux.org/viewtopic.php?id=62316

KDE - Global keyboard shortcuts not working

My global keyboard shortcuts have stopped working in KDE. When I try to open "Shortcuts and Gestures" in the System Settings, it freezes, and eventually needs to be terminated. Any ideas what could be causing this? I don't see any related recent updates in my pacman.log. I'm not even sure how to go about troubleshooting this.
Thanks

Hi there,
First, sorry to re-up that post after such a long time.
So, for some reasons, I had the same shortcuts problem since I installed Archlinux on my computer (more than ten months ago).
Shortcuts work when I start my computer up, but after a while (and for no reasons), it just stops working.
That problem is very annoying as I have to do everything using the mouse (and for someone like me who is used to shortcuts, it's very hard..... and long).
And, today, I finally managed to get shortcuts working.
And, the problem seems to come from the Dual Screen with my Nvidia graphic card.
I don't know why, but if I unplug my TV (HDMI connexion), shortcuts just work perfectly. If I plug my TV and set X for DualView, then after a while shortcuts don't work (or very badly).
I have no idea why... also, don't know if the issue is from KDE or Nvidia (I would say KDE as sometimes, when pressing Alt+Tab, the focus goes on the desktop of the TV, and then shortcuts don't work).
Anyhow, hope this will help people having the same issue.
And, of course, if you have any idea on how to fix that problem I would be very grateful (because, I really like having my TV as a second screen).

[SOLVED]Login manager in KDE 4.3 does not work!

This is a fresh install (just two days old and installed KDEbase just yesterday), and almost everything is working like a charm the only glitch I have experienced till now is that the login manager module in System Settings is not working as it should be. When I click on its button I know that it should normally ask me for my password but it does not do that and therefore when it opens up all the settings are greyed out and thus unchangable . Is this a bug or am I missing something (Anyone else experienced this!)?
Also, although not related to this topic, can somebody tell me where to find the setting for making windows shift to different workspace while dragging them through the edges of the screen. I'm sure I found this setting under Window Behavior>Window Behavior module in Kubuntu but it is nowhere to be found on the Arch KDE.
Last edited by bhadotia (2012-02-16 00:49:32)

bhadotia wrote:Also, although not related to this topic, can somebody tell me where to find the setting for making windows shift to different workspace while dragging them through the edges of the screen. I'm sure I found this setting under Window Behavior>Window Behavior module in Kubuntu but it is nowhere to be found on the Arch KDE.
As nobody answered this question, I guess I'll just mark this thread as solved as even after a lot of search I'm unable to find the preference and so none of the arch users here know about it as well. I think that feature was kubuntu specific and as Arch ships vanilla KDE I think its useless trying to find it here.
Anyways thanks for the help guys

KDE keybindings not working 'Keybinding could not be found'

Hi
Context:
Running arch linux with all the latest updates
9:30 AM - 14 Feb 2012
Until yesterday I have been using openbox + tint2 + kupfer
Starting from today I wanted to try something new: KDE!
So I did minimal(!) install
Problem
Some keybindigs are not working anymore
Volume Up, Volume Down, PLAY/PAUSE , ...
Also in Kupfer when I try to set launch keybinding to: SUPER+a it says ' Keybinding could not be found' ... however SUPER + SPACE does work.?
Could you give me some advice / tips on where to start looking?
Thanks !
Last edited by tgoossens (2012-02-14 08:29:31)

It might have something to do with KHotkeys
i'm now checking out this post
https://bbs.archlinux.org/viewtopic.php?id=67396

Ctl+C/ctl+V not working on FF 30 (Linux Debian SID, KDE)

Since an upgrade to Firefox 30 copy (ctl+v) is not working. The "Linux-Way" (marking with left mouse button, copy with middle button) works fine. Any solution available or is it a bug?
Many Thanks
Anton

Do other Ctrl shortcuts work?
Do Ctrl+Insert and Shift+Insert work?
*Copy: Ctrl+C or Ctrl+Insert (Mac: Command + C)
*Paste: Ctrl+V or Shift+Insert (Mac: Command + V)
*Cut: Ctrl+X or Shift+Delete (Mac: Command + X)

KDE Microblogging plasmoid not working with twitter anymore

Can anyone get twitter working with KDE microblogging plasmoid? Since yesterday evening it stopped updating in my case and now when I try to log in I just get an error instead of my feeds.

Box0 wrote:http://bcooksley.blogspot.it/2012/10/tw … lanet.html
Ahh I had a feeling that it might be due to a change in the twitter api. But I can't get it to workn with the new feed either.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

Bluetooth USB Dongle does not work

I have this generic looking USB dongle (forgot the brand) that I use with my eMachines e725 laptop. It worked fine with Linux Mint 9 KDE 64bit that I had to use for the past 1.5 years. The moment I plugged the dongle in, it was instantly detected and the bluetooth icon turned active in the system tray. However it does not work with my ArchLinux 64bit install with KDE4.6 (updated to latest packages). Due to issues with the new Kernel 2.6.39 series, I am using the LTS kernel.
lsusb:
Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
tail -f /var/log/messages.log
Jul 10 17:56:26 localhost kernel: [11565.480026] usb 3-1: new full speed USB device using uhci_hcd and address 9
Jul 10 17:56:26 localhost kernel: [11565.728190] usb 3-1: configuration #1 chosen from 1 choice
I've installed bluez and bluedevil. In KDE System Settings, when I go to the bluetooth options, it says no bluetooth adapters have been found.
Last edited by MetalheadGautham (2011-07-10 13:28:51)

Have you read the Bluetooth wiki page?
Seems to me you didn't run the relevant daemon.
Also, your thread title should include 'bluetooth' - 'USB dongle' on its own is too generic.
Last edited by tomk (2011-07-10 13:12:28)

[Solved] Suspend not working on Asus N82JV / USB 3.0

*Solved* Turns out you just have to create a file in /etc/pm/config.d with the following text: SUSPEND_MODULES="xhci-hcd ehci-hcd". Voilá. Suspend to ram works by a) sudo pm-suspend b) Ordering KDE to suspend c) Fn+F1.
I've been trying to figure this out for some time now.
I've managed to get suspending to disk working, using hibernate-script with USuspendMethod disk. I had to blacklist xhci_hcd (usb 3.0) in order for it to work.
I already tried pretty much every s2ram combination as described here, even though I haven't yet tried the booting with minimal environment part.
Every combination ends up complety locking the system, with no possibility of ctrl+alt+fx or even ctrl+alt+del. Just hangs 'forever'.
/etc/suspend.conf
snapshot device = /dev/snapshot
resume device = /dev/sda7
#image size = 350000000
suspend loglevel = 2
compute checksum = y
compress = y
#encrypt = y
#early writeout = y
#splash = y
shutdown method = shutdown
/etc/hibernate/common.conf
# Configuration options common for suspending to disk or RAM.
# Options are not case sensitive.
# See hibernate.conf(5) for help on the configuration items.
### Some global settings
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 3
#LogTimestamp yes
AlwaysForce yes
# AlwaysKill yes
# HibernateVT 15
Distribution arch
# XDisplay :0
### Scriptlets
### Scriptlets provide support for doing all sorts of things before and after
### suspending. The defaults settings here should work for most people, but
### you may wish to edit these to taste. Consult "hibernate -h" for help on
### the configuration settings.
### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg
### clock
SaveClock restore-only
#DirectIsa
### devices
# IncompatibleDevices /dev/dsp /dev/video*
### diskcache
# DisableWriteCacheOn /dev/hda
### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme tuxonice
### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
# UnmountFSTypes smbfs nfs
# UnmountGraceTime 1
# Mount /windows
### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak
# see http://bugs.debian.org/317479
# RemountXFSBoot yes
### hardware_tweaks
# IbmAcpi yes
# RadeonTool yes
# Runi915resolution yes
FullSpeedCPU yes
### lilo
# EnsureLILOResumes yes
### lock (generally you only want one of the following options)
## For console you need vlock available.
## For x you need xscreensaver-command-command available.
## For gnome you need gnome-screensaver-command available.
## For kde you need dcop, kscreensaver available.
## For XAuto you need xautolock available.
## For Xtr you need xtrlock available.
## For Freedesktop (for example KDE4) you need dbus-send available
# LockConsoleAs root
# LockXScreenSaver yes
LockGnomeScreenSaver yes
# LockFreedesktop
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes
# LockXtrLock yes
### misclaunch
# OnSuspend 20 echo "Good night!"
# OnResume 20 echo "Good morning!"
### modules
# UnloadModules snd_via82cxxx usb-ohci
# UnloadAllModules yes
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules
### modules-gentoo
# GentooModulesAutoload yes
### network
# DownInterfaces eth0
# UpInterfaces auto
### networkmanager
EnableNMReconnect yes
### pause_audio
# MuteAudio yes
# PauseAudio yes
### pcmcia
# EjectCards yes
### programs
# IncompatiblePrograms xmms
### services
# RestartServices laptop_mode anacron
# StopServices alsasound
# StartServices aumix
### vbetool
# EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes
### xhacks
SwitchToTextMode yes
# UseDummyXServer yes
# DummyXServerConfig xorg-dummy.conf
### xstatus
## This can be set to gnome, kde or x:
## For gnome you need zenity available.
## For kde you need dcop, kstart, kdialog available.
## For x you need to have xosd OR xmessage available.
# XStatus gnome
# XmessageDisable yes
# XSuspendText Preparing to suspend...
# XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font '-misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-*' --colour=Green --shadow 1 --pos bottom --align center --offset 50
### xbacklight
# BackLight yes
### gaim
## You need to have dbus, gaim_remote available.
# LogoutGaim yes
# GaimRestoreStatus yes
# GaimLogoutMessage Hibernating
# GaimLoginMessage Back from hibernation
### pidgin
# LogoutPidgin yes
# PidginRestoreStatus yes
# PidginLogoutMessage Hibernating - bye!
# PidginLoginMessage I'm back!
### SSH and PGP keys
# AgentsClearGPG yes
# AgentsClearSSH yes
### Virtualbox
# SuspendVirtualbox yes
### Dropping disk caches
# As a way to speed up suspending, you can free the memory used for disk caches so there will be less to write to the disk. The downside is the risk of crashing your system. but I have had no trouble with it so far, while reducing the size of the suspended image by half.
#OnSuspend 00 sync; echo 3 > /proc/sys/vm/drop_caches
/etc/hibernate/ususpend-ram.conf
# This file is used when suspending to RAM using the uswsusp functionality in
# the kernel. You will require the s2disk binary to be installed - this can be
# downloaded from http://suspend.sourceforge.net/ . On Debian systems, just
# install the uswsusp package.
# Add any configuration options specific to ususpend to this file. Ordering is
# not crucial, and options are not case-sensitive.
# See hibernate.conf(5) for help on the configuration items.
USuspendMethod ram
## if needed, pass the -f option to s2ram
USuspendRamForce yes
## if s2ram is unsure, let it use system-specific options instead of having to
## force it.
#USuspendRamUnsureOk yes
## if needed, pass the -m option to s2ram
## (-m should be used instead of -s, if possible; see
## https://bugzilla.novell.com/show_bug.cgi?id=229603)
USuspendRamVbeMode yes
## if needed, pass the -s option to s2ram
## (if possible, prefer -m to -s; see above)
# USuspendRamVbeSave yes
## if needed, pass the -p option to s2ram
# USuspendRamVbePost yes
## if needed, pass the -a option to s2ram
## (Intel users see: http://en.opensuse.org/S2ram#Intel_Graphics_Chipsets)
USuspendRamAcpiSleep 3
## if needed, pass the -v option to s2ram
USuspendRamPciSave yes
## if needed, pass the -r option to s2ram
# USuspendRamRadeontool yes
Include common.conf
Here's the output from /var/log/hibernate.conf, from when I try hibernate -F /etc/hibernate/ususpend-ram.conf
Starting suspend at Seg Ago 16 22:38:02 WEST 2010
hibernate: [01] Executing CheckLastResume ...
hibernate: [01] Executing CheckRunlevel ...
hibernate: [01] Executing LockFileGet ...
hibernate: [01] Executing NewKernelFileCheck ...
hibernate: [10] Executing EnsureUSuspendCapable ...
hibernate: [11] Executing XHacksSuspendHook1 ...
hibernate: [59] Executing RemountXFSBootRO ...
hibernate: [61] Executing NMSuspend ...
Putting NetworkManager to sleep
hibernate: [89] Executing SaveKernelModprobe ...
Saved /proc/sys/kernel/modprobe is /sbin/modprobe
hibernate: [91] Executing LockGnomeScreensaver ...
hibernate: [91] Executing ModulesUnloadBlacklist ...
Unloading blacklisted modules listed /etc/hibernate/blacklisted-modules
Module version for ipw2100 is 66050
Module version for ipw2200 is 66050
Module version for snd_bt_sco is
Module version for ndiswrapper is
Unloading blacklisted module uvcvideo (and dependencies)
Unloading uvcvideo ...
Removing modules with rmmod.
Unloading blacklisted module xhci_hcd (and dependencies)
Unloading xhci_hcd ...
hibernate: [95] Executing XHacksSuspendHook2 ...
xhacks: changing console from 7 to 15
hibernate: [98] Executing CheckRunlevel ...
hibernate: [98] Executing FullSpeedCPUSuspend ...
Switched to performance, with min freq at 2267000
Switched to performance, with min freq at 2267000
Switched to performance, with min freq at 2267000
Switched to performance, with min freq at 2267000
hibernate: [99] Executing DoUSuspend ...
hibernate: Running /usr/sbin/s2ram -f -m -a 3 -v...
lspci
spci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
01:00.0 VGA compatible controller: nVidia Corporation Device 0caf (rev ff)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 USB Controller: NEC Corporation Device 0194 (rev 03)
05:00.0 Ethernet controller: Atheros Communications Device 1063 (rev c0)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
lsusb
Bus 002 Device 003: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod
Module Size Used by
cryptd 6246 0
aes_x86_64 7396 1
aes_generic 26154 1 aes_x86_64
acpi_call 1712 0
ipv6 280376 32
usb_storage 42628 0
uvcvideo 59687 0
videodev 39355 1 uvcvideo
v4l1_compat 15554 2 uvcvideo,videodev
v4l2_compat_ioctl32 10681 1 videodev
snd_hda_codec_intelhdmi 10070 1
snd_hda_codec_realtek 267731 1
snd_seq_oss 29920 0
snd_seq_midi_event 5420 1 snd_seq_oss
snd_seq 51394 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 5469 2 snd_seq_oss,snd_seq
snd_hda_intel 21906 2
snd_hda_codec 76787 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6286 1 snd_hda_codec
snd_pcm 71781 2 snd_hda_intel,snd_hda_codec
asus_laptop 14339 0
sparse_keymap 2547 1 asus_laptop
wmi 5925 0
nouveau 523432 0
snd_timer 19820 2 snd_seq,snd_pcm
ac 3089 0
battery 10055 0
thermal 12258 0
ttm 45713 1 nouveau
snd 58291 13 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 7233 2 snd_hda_intel,snd_pcm
arc4 1362 2
ecb 1993 2
joydev 9863 0
xhci_hcd 45124 0
ath9k 72182 0
ath9k_common 2529 1 ath9k
iTCO_wdt 10669 0
iTCO_vendor_support 1849 1 iTCO_wdt
mac80211 182919 2 ath9k,ath9k_common
ath9k_hw 216824 2 ath9k,ath9k_common
ath 8790 2 ath9k,ath9k_hw
cfg80211 141632 4 ath9k,ath9k_common,mac80211,ath
rfkill 15518 2 asus_laptop,cfg80211
led_class 2347 2 asus_laptop,ath9k
atl1c 31680 0
i2c_i801 8598 0
ehci_hcd 36042 0
usbcore 145453 5 usb_storage,uvcvideo,xhci_hcd,ehci_hcd
cpufreq_powersave 942 0
psmouse 53592 0
cpufreq_ondemand 7990 4
sg 25328 0
acpi_cpufreq 6491 1
freq_table 2339 2 cpufreq_ondemand,acpi_cpufreq
evdev 8775 16
serio_raw 4470 0
pcspkr 1803 0
processor 29040 5 acpi_cpufreq
fuse 59417 7
soundcore 6089 1 snd
rtc_cmos 8886 0
rtc_core 14439 1 rtc_cmos
rtc_lib 1882 1 rtc_core
ext4 330125 1
mbcache 5762 1 ext4
jbd2 75607 1 ext4
crc16 1281 1 ext4
sr_mod 14842 0
cdrom 35809 1 sr_mod
sd_mod 27923 5
ahci 36972 4
libata 155099 1 ahci
scsi_mod 94212 5 usb_storage,sg,sr_mod,sd_mod,libata
i915 296298 2
drm_kms_helper 23740 2 nouveau,i915
drm 162265 5 nouveau,ttm,i915,drm_kms_helper
i2c_algo_bit 5071 2 nouveau,i915
button 4818 2 nouveau,i915
i2c_core 18364 7 videodev,nouveau,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video 19077 1 i915
output 1956 1 video
intel_agp 29074 2 i915
Am I missing something? Is it another module? Some hardware that's causing this? The only other odd hardware configuration, other than USB 3.0 is the dual graphic cards (Nvidia Optimus). The Nvidia is powered down, though (tried both ways).
Note: The default suspend system doesn't work, it just locks the screen (if in gnome/kde/whatever)
Last edited by Xehoz (2010-11-25 23:37:14)

Looke like tripplec has this right. From http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD024298
Notes:
ThinkPad T420, T420s and T520 models, USB 3.0 port on the Mini Dock Series 3 with USB 3.0 will function as a USB 2.0 port.
Thinkpad T430, T430s and T530 models on the Mini Dock Series 3 with USB 3.0 will function as a USB 3.0 port.
The functionality of the T420, T420s and T520 is a limitation of the Intel Chipset not a defect in either the Thinkpad or Mini Dock Series 3 with USB 3.0
I don't see that on the sales page. Only found it by searching on the part number
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Everpad not working in KDE?

Similar Messages

Maybe you are looking for