Every 3 seconds same question....

The problem is that years ago I had an id apple account, but the email which is registred this account I cant entry any more time, and I dont remember anything about it.... and then I have a new id apple and icloud account where everything is correct.... the problem is that in my iphone I have registred my icloud account with the old id apple.... and every 3 seconds appears in my mobile (CONNECT TO ICLOUD, INTRODUCE THE PASSWORD OF ID APPLE...) but as I said before I cant do anything with that id......
any solution to change my id icloud linked to my iphone in my new one id??
iphone 4 , ios 7.1.2
THANK YOU SO MUCH EVERYONE!!

The answer depends on if that old id still exists on Apple servers (account still valid). If account valid - you need to get correct password even if you don't know it - you can contact Apple for assist with reset. If account does not exist anymore - you can restore iphone as new and it will take care of it.

Similar Messages

I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.

I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.at various times it asks different passwords.

Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.

Refresh only a region in a Page automatically every second

Dear All
I have a page in my application which would display the remaining seconds like 20,19 etc and when it reaches 0 the webpage should redirect to the calling page. I have set a counter for the same and is calling meta refresh tag in the page header every second for resetting the counter. Everything works fine.
My question is whether there is any other way instead of using the meta tag as this will refresh the full screen. I just need the region containing the counter only to be refreshed and displayed on the screen.
Thanks

Hi,
HTML regions do not support native region refresh like e.g. classic reports.
You need write own JavaScript to fetch data using AJAX.
Regards,
Jari

Write to measurement file VI - every second, is that too fast ?

I use the write to measurement file VI to save 5 values + a comment to a file. The VI is in a loop. The VI adds new values to the same file every time it is called. In one of the tutorials it is said "VIs can be more efficient if you avoid opening and closing the same files frequently". I understand that; the write to measurement file VI does open and close the same file every time it is called.
I want the VI called every second to save new data. Tests I did with this rate did show problems. However, what is meant by frequently? Every second? Every millisecond? So my question is: is saving every 1 second, like I want, likely to cause problems, or isn't that time period hardly a problem? Or is there a better solution (although this VI gives me all possibilities I want, including saving a comment and saving to multiple files with nice filenames; I would really like to use this VI).
-- flying dutchman --
Attachments:
write every second.jpg ‏25 KB

The answer lies halfway between mine and Nukem's answers. Instead of storing all values in a shift register until the end, you simply store them, for say 1 hour, and append to the file. This also enables you to save some of your data in the event of a power failure or something.
Use a nested for loop, the inner loop will run for say, 50 or 100 iterations, storing values in a shift register array. Upon exiting this loop, the data is appended to your file. The outer for loop will run for how many iterations out need.
For some simple examples, lets say you need 10,000 loops and you want to save every 100 iterations. Have the inner loop run 100 times and the outer loop run 100 times.

Ask Michael Webinar every second Wednesday

Hello everyone
You may know me as the answerer of questions in this forum and as the author of the Discoverer 10g Handbook. I wanted to let you know that I also conduct a free Ask Michael webinar on Discoverer every second Wednesday of the month at 3pm Central. There is no fee for this and I am not selling anything nor am I touting for business. This is just a way for me to provide another free way to help the Discoverer community by passing on my knowledge.
If you would like to know more click here: http://ascbi.com/question.htm
By the way, I am also presenting a paper on maximizing investment in Discoverer at the IOUG / OAUG Collaborate conference in Orlando in May, and again at the ODTUG conference in Monterey in June. If you happen to be attending come along and say hello.
You may also be interested in reading Oracle's statement of direction for Discoverer which you will find here: http://www.oracle.com/technology/products/discoverer/pdf/discoverer_sod_jan2009.pdf
Best wishes
Michael Armstrong-Smith

The goal with singletons is to ensure that at least one thread has a reference to the object that you do not want finalized. In this case, the class is being garbage-collected and reloaded. In your main, you can do this:
public static void main(String [] argv)
Class cl = LogManager.class;
}and assuming that main terminates when your app does, that will protect the class from being garbage collected. If your application is based in a thread, then do the same thing in your run() method. It isn't evident in your code how the log manager is exposed - if the functionality is used by calling static methods on the class (I.E., the instances are never shared) then the problem can be fixed as above. If you do share the instance, then it is a race condition as to when the problem will arise.

TCCD crashes every second

Dear All,
I've got a problem with TCC similar to https://discussions.apple.com/message/19128438#19128438.
There are 2 accounts in my macbook pro. If I log in with the second user then tccd crashes every second and that makes impossible to use most of the programs (Safari, Contacts, Mail etc).
There is no tccd db created for this user. The com.apple.TCC folder doesn't exist in ~/Library/Application support/
If I open the Console then I see how crash reports are generated. Every second I've got a new tccd crash report.
The system is freshю I just got out of the box in February. Any help is appreciated.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

When I plug in ipod, it connects/disconnects every second, forever..Win-7

My ipod worked fine when I was running XP, but when I changed to Windows 7 (32bit), it started doing this thing where it would disconnect and connect every second, for as long as it's little heart desired.
i tried:
-letting it die
-restarting it
-all possible solutions provided by itunes help
-putting it into disk mode
-reformatting it (it worked on dad's comp: win xp)
other facts:
-it still charges
-still plays music when not connected to computer

Having the same problem with Vista Ultimate 64 bit. Started about a month ago. Gen 1 iPod video that I have updates and connects fine, just not my 4Gen Nano. Sent it in for repair, they sent me back a different one, having the same problem.

Create data merged document with data on every second page?

Is it possible to create a data merged document with the variable data only on every second page?
I have set up the pages with the variable data as a master page (on every odd page) with the text box and paragraph style all set up, and I have set 'override master page items' so the data can be placed, but InDesign seems to freeze up when I try to create the merged document?

There should be no problem doing the merge with a two-page master and a two-page template document with fields only on one page (and off the top of my head there's no reason to move them off the master page if that's where you put them). I think the problem here is that rachrachm already has a file of 500 pages (based on another thread asking how to apply masters to every other page).
It's potentially possible to simply place the data file (without the header row) as a text file and auto-flow through the master page frames (can't say for sure without seeing the files), or if the pages without the merge fields are the same just, remove all but the first two pages from the template and do the merge.
As I metioned earlier, though, this is a very inefficient method of producing that sort of document. A true variable data print flow would be better (you'd need to find a commercial printer who can do it with your data file), or the home version would be to make one single page file for the static content, print 250 copies (plus a few extras, just in case), then make a single page merge template, do the merge, and print that on the back of the already printed pages, or as a separate page. It is immeasurably faster to print multiple copies of a document than it is to print a document that has multiple identical pages.

"Last devices used" menu every second over Ovi map...

Hello all,
I installed Ovi Maps on my phone, and have a huge problem with it: Every second the"Last devices used" pops up and goes away again.
Since a few years I own (and use) a Nokia N95, and I just used 'Setup Nokia Maps Update 1.0.8.exe' to get Ovi maps on my phone. Apparently I had to use 'Nokia Software Updater' to make sure I got the latest version. Done that too.Next step is to use the Nokia Map Loader to get the maps on there. Done that too.
Here is the version info of the installed map:
I have Bluetooth enabled. Now, when I use the maps, every second the"Last devices used" pops up and goes away again. Mildly irritating would be a severe understatement here. Switching Bluetooth off and starting the map again gives the question "Bluetooth is currently switched off. Switch on?". Every second. It seems impossible to answer the popup-question or do something with the popup-menu.
Is this a known prob by anyone, and can you please tell me a fix or workaround (preferably a fix of course)?
Thank you,
wlamee
Solved!
Go to Solution.

And I got a nippy reply from the Benelux Nokia Care.
The trick is I had to go to Tools -> Settings -> General -> Positioning -> Positioning Methods, and switch off 'Bluetooth GPS'. I think I always ahd this switched on and it never complained with the standard Nokia maps, but I'm not sure - I think I saw that menu only once, when I was palying with my GPS and the original maps.
But hey, it's fixed. Cool!
wlamee

How to make Mavericks Activity monitor refresh every second

I noticed that the Mavericks version of Activity Monitor now refreshes only every 5 seconds. It used to be every second. I am guessing they intend to make Activity Monitor more energy efficient this way, but is it possible to make it refresh every second like it used to ?
Thank you !

All right,I have set up my Philips LCD vertical display content with normal built in screen... need playing with xrandr & xorg.conf more then....
one question, intel driver in linux support vertical screen?
Last edited by andywxy (2008-11-19 15:23:01)

Flex starting the video every second

So I need some help, badly...
I have a flex video player setup, and it's working great as
long as I am pulling a video from the local drive like so:
this.myVideoDisplay.source = "assets/media/testvidflash.flv";
This plays great, works great, looks great... However if I
change that single line of code to:
this.myVideoDisplay.source =
"rtmp://mydomain.com/media/video/public/testvidflash.flv";
Then I get the video playing, but every second or so it
starts another copy of the video in the background and I get this
ever increasing echo.
As best we can tell, the video file on the rtmp works fine in
every other flash player we have tested, and I can create a new swf
in CS3 and it works fine.
Does anyone have any ideas?

Mamata,
thank you very much for your reply.
What you say all make sence, and now I understand it better,
I have a couple of more questions:
1. When you say the network capability, you mean the viewer side or the server side?
2. I read somwhere that the fms 3,5 has a feature of recognizing the users end speed and automatically adjusting the strem rate. So, it's eather I misunderstood the meaning of it, or this feature needs to be "switched on" somehow?
Thank you

Suspends only every second time when lid closed

Hello everybody, my problem is as the subject: to suspend I have to close usually the laptop lid twice.
I'm using kde, but I have also used years ago fluxbox, tweaking scripts and using laptop-mode (which is not running now). Thanks in advance for every idea where to look.
/etc/acpi$ cat handler.sh
#!/bin/sh
# Default acpi script that takes an entry for all actions
minspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq`
maxspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq`
setspeed="/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed"
set $*
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger "PowerButton pressed: $2"
poweroff
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
echo -n mem >/sys/power/state
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
00000001)
logger 'Battery offline'
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:

I actually do not understand who comands at the end - this handler.sh or the settings in Kde-powermanaging, I guess it's the second, I did remove the actions for suspend on lid close time ago. I made a test now, when I change handler.sh and check "do nothing when lid close" in kde powersettings happens exact the same: performs suspend every second time only.
button/lid)
case "$3" in
close)
logger 'LID closed'
/usr/sbin/pm-suspend
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
Last edited by steff (2012-07-21 17:08:46)

IPod needs to be reformated every "second use"

Hey
I am German so pleas excuse my spelling and gramma ;-(
I just reinstaled my Computer a cupple of days ago, so it´s clean, before i reinstaled it everything was working just fine.
So here is what happens, i plug in my USB conection in iPod and USB slot, it takes some time untill i get toled that my iPod needs to get reformated for use with this computer, i do reformate it, it works, i put the ~1600 i have on it, disconect it properly - and the next time i conect it we are back to waiting a while and having to reformate it...
I can´t imagin that is is healthy for the iPod to hammer it with 1600 songs every second day wen i want to put a cupple of songs or a playlist on it (aside from it being anyoing no matter how bad it is for the hardware...)
It would be great if someone could help me fix this.
I am not a profesional so it might be issues with wrong instalation of the USB ports (software wise, i did not change any hardware) but i think i got al the drivers on the computer properly.

It is telling me that i need to reformate it for use on this computer so i am pritty darn shure i can´t just put the files on it like i would wen it would work like it suposed to work (and did work sinc i bought it in september)
Again. brok down so everyone hopfully gets what i am fighting with
1. I conect the iPod
2. the i pod tells me it needs to be reformated for use on this computer.
3. i reformate it.
4. it works just fine, i can put all the songs on it like i should be able to.
5. the next time i conect my iPod to the VERY SAME computer there is minutes of it only being the USB harddrive, than i get a mesage that i need to reformate it for use on this computer (wich, yes, like formating usualy dos, deletes all files)
help would be awsome becaus after 3 days of this i feel like having a creative jukebox would be better, and that should be telling you something sigh

ToolBoxTools.addEventListener only works every second time

Hi!
Our layouts pretty often click on the "page tool" by mistake and it happened a few times, that they changes the size of the page without even noticing. Because there is no way to remove the tool from the toolbar (I guess?), I wanted to write a script, that at least shows a message, that the page tool ("Seitenwerkzeug" in german) was selected. Unfortunately the event listener only works every second time:
1. indesign starts > selection tool is active
2. click on page tool > message appears > page tool is active
3. click on "another tool1" > "another tool1" is active
4. click on "another tool2" > "another tool1" is active
5. click on page tool > nothing happens, the icon of the page tool is active, but the icon of the "another tool2" is still active, too, and "another tool2" is still activated
6. click on "another tool3" > "another tool3" is active
7. click on page tool > message appears > page tool is active
8. ......
Any idea why that is?
My script:
#targetengine myToolListener
app.toolBoxTools.addEventListener ("afterAttributeChanged", changeToolAlert);
function changeToolAlert() {
    if(app.toolBoxTools.currentToolName == "Seitenwerkzeug") {
        alert ("Message", "Title");
    exit(); //i tried with and without this!
At the beginning I tried to use an confirm message instead of an alert, which had the same problem and I thought it might be because the changing doesn't work... but it seems I can't even work with the information without something "crashing" in the background?
My previous confirm Function:
function changeToolConfirm() {
    if(app.toolBoxTools.currentToolName == "Seitenwerkzeug") {
        var confirmDialog = confirm("Do you really want to activate the page tool?", true);
        if(!confirmDialog) {
            app.toolBoxTools.currentTool = UITools.SELECTION_TOOL;
I really hope someone has an idea
Best,
Anke

Hi Anke,
The problem, I think, comes from the fact that the Page Tool selection event (which you listen to via afterAttributeChanged) needs some time to complete. Since the alert() or confirm() instruction gives the focus to a new modal window before the event life-cycle is finished, the GUI becomes instable, the PageTool icon state is not properly restored, and your event management goes wrong.
A way to solve this might be to queue a temporary IdleEvent listener once the Page Tool selection event is caught. That is, we do not initiate any modal dialog as long as the GUI is refreshing.
Something like this:
//====================================================
// PageToolDisclaimer.jsx
//====================================================
// Should be useable as a startup script, no #targetengine required
// NB - MutationEvent is known to create a global 'evt' variable
// so we don't seem to need a persistent session engine here :-)
// That's why the active script File is used as the event handler
(function(/*File*/EVENT_HANDLER, /*str*/TASK_NAME, /*uint*/TASK_TIME, /*str*/PAGE_TOOL_NAME)
    var t;
    // Installer
    if( !(t=app.toolBoxTools.eventListeners).length )
        t.add(MutationEvent.AFTER_ATTRIBUTE_CHANGED, EVENT_HANDLER);
        return;
    // IdleEvent handler (--> confirm)
    if( (t=app.idleTasks.itemByName(TASK_NAME)).isValid )
        t.eventListeners.everyItem().remove();
        t.remove();
        if( !confirm("***WARNING***\rDo you really want to activate the page tool?", true) )
            app.toolBoxTools.currentTool = UITools.SELECTION_TOOL;
        return;
    // PageTool event handler
    if( ('evt' in $.global) && 'currentToolName'==evt.attributeName && PAGE_TOOL_NAME==evt.attributeValue )
        evt.stopPropagation();
        app.idleTasks.add({name:TASK_NAME, sleep:TASK_TIME})
              .addEventListener(IdleEvent.ON_IDLE, EVENT_HANDLER);
})(app.activeScript, 'WaitPageTool', 400, app.translateKeyString('$ID/Page Tool'));
Hope that helps.
@+
Marc

Every second G-note is missed by Logic Express

Hi,
I have really strange problem: logic express misses every second G-note (two octaves down from middle-C) that I press from MIDI-keyboard. It also misses all G-notes if I press something before the G-note.
This is not a keyboard problem: I have found same issue with two different keyboards and three different USB-midi-inputs. Neither it's hardware problem, I can switch octave from keyboard and it still happends. When I try "test midi" from OS X, I hear every note coming in to my mac, but every second G-note is missed by Logic. It's clearly something inside Logic Express since OS X receives the notes from keyboards all the time.
I have newest update for Logic Express and all OS X updates up to date.
Any ideas?

Hi there,
Just to make sure, download this:
http://www.snoize.com/MIDIMonitor/
Then check on the keyboard to make sure that it's producing what you expect.
Next, have you reassigned that key to a Logic Express key command? Or perhaps to another programme somewhere?
You could always try reseting the key commands, assuming you haven't set up lots of custom ones.
Open up the Environment (Command-8) and look at the the Clicks and Ports layer. There's a diagnostic tool in there that shows you what notes are coming in to Logic. That doesn't necessarily means what notes are going to the sequencer since you can filter notes out in the environment.
I'd also have a look at the Transform Window to see whether there's something wrong in that.
Sorry not to give you detailed instructions for all of these different actions - this post would be pages long so have a look in the manual and see if you can't figure out some of these advanced functions.
Pete

Every 3 seconds same question....

Similar Messages

Maybe you are looking for