Every Application the connects to the net crashes.

If anybody could help me out it would meen a lot to me. Been waiting for the device for months so im a bit gloomy since its not working .
The application boots fine, and I can make calls with it, send SMS, and use the mediaplayer. But whener I try to use any of the programs that uses the net connection it just crashes after 5 secs and gives the message "Internal Error. The Application Browser was closed". Same goes for OVImaps.
The firmware is (2.2009.51-1). Only thing I have done to the device is receive and accept the cellphone carriers setings for Internet use.
I have tried connecting through both WLAN and GPRS/3g. Still crashes.
Any help?

Forgot to mention that i have an n900. And that the correct english message is "Internal Error. Application "Web" closed".

Similar Messages

I have a problem with Apple store when installing large application: The system crashes. Any suggestion?

I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

ITunes sync iPhone 4 application, the computer crashes

Will the iTunes "restore"function, you can synchronize the application failed to iPhone 4 repair? because my computer (Windows7) and then iTunes crashes when sync the iPhone 4.
I'm from Taiwan, may not translate well
Huang.JyunSiang

Take a look at this link, http://support.apple.com/kb/TS1538

I am trying to surf the Net and every time I click the SAFARI button, a window pops up saying that this application was closed all of a sudden

I am trying to surf the Net and every time I click the SAFARI button, a window pops up saying that this application was closed all of a sudden. What can I do to solve this problem?

How are you connecting to this website?

I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. Help?

I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. I've tried every single solution I've seen, and none of them work. I know the Classic is outdated, but my other iPod doesn't have nearly as much room. Can anyone help with this?

See Corrupt iPod classic.
tt2

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (13-inch, Early 2011) (Technical Specifications)
 MacBook Pro - model: MacBookPro8,1
 1 2.3 GHz Intel Core i5 CPU: 2-core
 16 GB RAM Upgradeable
 BANK 0/DIMM0
 8 GB DDR3 1333 MHz ok
 BANK 1/DIMM0
 8 GB DDR3 1333 MHz ok
 Bluetooth: Old - Handoff/Airdrop2 not supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 250
Video Information: ℹ️
 Intel HD Graphics 3000 - VRAM: 512 MB
 Color LCD 1280 x 800
System Software: ℹ️
 OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
 Hitachi HTS545032B9A302 disk0 : (320,07 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
 Core Storage: disk0s2 319.21 GB Online
 MATSHITADVD-R UJ-898
USB Information: ℹ️
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM2070 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Launch Agents: ℹ️
 [not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.oracle.java.Java-Updater.plist [Click for support]
 [running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [loaded] com.adobe.SwitchBoard.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
 [loaded] com.oracle.java.Helper-Tool.plist [Click for support]
 [loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
 [running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
 [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
 [loaded] com.adobe.ARM.[...].plist [Click for support]
 [loaded] com.google.keystone.agent.plist [Click for support]
 [running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper UNKNOWN Hidden (missing value)
 AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
 Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
 JavaAppletPlugin: Version: Java 8 Update 31 Check version
 FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 Default Browser: Version: 600 - SDK 10.10
 AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
 AdobePDFViewer: Version: 10.1.13 [Click for support]
 Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
 Google Earth Web Plug-in: Version: 7.1 [Click for support]
 Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
 iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
 npsf_cef: Version: sf 3.3.1.1 [Click for support]
 Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
 DivX HiQ
 DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
 Flash Player [Click for support]
 Java [Click for support]
 MacFUSE [Click for support]
 Perian [Click for support]
 Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
 Skip System Files: NO
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
 Destinations:
 Time Machine Backups [Local]
 Total size: 999.86 GB
 Total number of backups: 60
 Oldest backup: 2012-07-15 01:16:54 +0000
 Last backup: 2015-03-29 19:28:06 +0000
 Size of backup disk: Excellent
 Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
 97% rapportd
 3% WindowServer
 1% mds
 0% fseventsd
 0% distnoted
Top Processes by Memory: ℹ️
 155 MB Safari
 120 MB Finder
 86 MB rapportd
 86 MB WindowServer
 69 MB mds_stores
Virtual Memory Information: ℹ️
 12.56 GB Free RAM
 2.53 GB Active RAM
 428 MB Inactive RAM
 1.66 GB Wired RAM
 1.04 GB Page-ins
 0 B Page-outs
Diagnostics Information: ℹ️
 Mar 31, 2015, 06:00:15 PM Self test - passed
 Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
 Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
 Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
 Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
 Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
 Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
 Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
 Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
 Note: You will need an active Internet connection. I suggest using Ethernet
 if possible because it is three times faster than wireless.

How do the application servers connect the new database after failing over from primary DB to standby DB

How do the application servers connect the new database after failing over from primary DB to standby DB?
We have setup a DR environment with a standalone Primary server and a standalone Physical Standby server on RHEL Linux 6.4. Now our application team would like to know:
When the primary DB server is crashed, the standy DB server will takeover the role of primary DB through the DataGuard fast failover. As the applications are connected by the primary DB IP before,currently the physical DB is used as a different IP or listener. If this is happened, they need to stop their application servers and re-configure their connection so the they coonect the new DB server, they cannot tolerate these workaround.
Whether does oracle have the better solution for this so that the application can automatically know the role's transition and change to the new IP without re-confige any connection and shutdown their application?
Oracle support provides us the answer as following:
==================================================================
Applications connected to a primary database can transparently failover to the new primary database upon an Oracle Data Guard role transition. Integration with Fast Application Notification (FAN) provides fast failover for integrated clients.
After a failover, the broker publishes Fast Application Notification (FAN) events. These FAN events can be used in the following ways:
Applications can use FAN without programmatic changes if they use one of these Oracle integrated database clients: Oracle Database JDBC, Oracle Database Oracle Call Interface (OCI), and Oracle Data Provider for .NET ( ODP.NET). These clients can be configured for Fast Connection Failover (FCF) to automatically connect to a new primary database after a failover.
JAVA applications can use FAN programmatically by using the JDBC FAN application programming interface to subscribe to FAN events and to execute event handling actions upon the receipt of an event.
FAN server-side callouts can be configured on the database tier.
FAN events are published using Oracle Notification Services (ONS) and Oracle Streams Advanced Queuing (AQ).
=======================================================================================
Who has the experience and the related documentation or other solutions? we don't have the concept of about FAN.
Thank very much in advance.

Hi mesbeg,
Thanks alot.
For example, there is an application JBOSS server connecting the DB, we just added another datasource and put the standby IP into the configuration file except adding a service on DB side like this following:
 <subsystem xmlns="urn:jboss:domain:datasources:1.0">
 <datasources>
 <datasource jta="false" jndi-name="java:/jdbc/idserverDatasource" pool-name="IDServerDataSource" enabled="true" use-java-context="true">
 <connection-url>jdbc:oracle:thin:@<primay DB IP>:1521:testdb</connection-url>
 <connection-url>jdbc:oracle:thin:@<standby DB IP>:1521:testdb</connection-url>
 <driver>oracle</driver>
 <pool>
 <min-pool-size>2</min-pool-size>
 <max-pool-size>10</max-pool-size>
 <prefill>true</prefill>
 </pool>
 <security>
 <user-name>TEST_USER</user-name>
 <password>Password1</password>
 </security>
 <validation>
 <valid-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleValidConnectionChecker"/>
 <validate-on-match>false</validate-on-match>
 <background-validation>false</background-validation>
 <use-fast-fail>false</use-fast-fail>
 <stale-connection-checker class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleStaleConnectionChecker"/>
 <exception-sorter class-name="org.jboss.jca.adapters.jdbc.extensions.oracle.OracleExceptionSorter"/>
 </validation>
 </datasource>
 <drivers>
 <driver name="oracle" module="com.oracle.jdbc">
 <xa-datasource-class>oracle.jdbc.OracleDriver</xa-datasource-class>
 </driver>
 </drivers>
 </datasources>
 </subsystem>
If the failover is occurred, the JBOSS will automatically be pointed to the standby DB. Additional actions are not needed.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How do I establish a connection to another Java program on the net?

Hi all,
I have been reading the java tutorial to find a solution to my problem but I havent really found what Im looking for.
I want to establish a connection that allows a client to get a copy of an object from a running java-application on a server on the internet.
I have read about the Socket-class but the tutoral advices only to use it on a locale network. I know IDL and RMI only by name - is this what I should be reading about?
If one of you guys have a source-code example on how to make java programs communicate over the net, please post it!
Regards Albert

Assuming this is "wide area" stuff, not just on a local area network, your best bet is to stick to http connections. You need a web server, probably Tomcat.
Your client can connect using URL.openConnection().
As to protocols you could use SOAP. It has the advantage that you can get the code for it for free, but it can be pretty complicated to configure. In particular it only knows how to transmit a limited set of object types and if you want to go beyond them you have to write converters. SOAP servers typically run under an web server anyway. SOAP converts all the data to XML for transmission.
However it may be simpler to use Java's built in serialisation facility and send your data as an ObjectStream.
In the set up you're talking about the message going to the server seems a lot simpler than the response. It may make sense to send your data as normal keyword parameters of a POST transaction but to have the server respond with an Object stream. That's well within the normal operation of a web server.

My Mountain Lion have freezing all the time, in every application

The OSX 10.8.4 (even with uptade 10.8.5) have crashing and freezing every 10s in every application (browser, games etc...), even native application (iTunes).it's my first mac, what i can do to fix this? it's so annoying using mac this way.... help me! (Macbook Pro 13' 2011/12 Core i5, 4GB RAM, 500GB HD)

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

HT1341 I have a new mac pro with Mountain Lion 10.8.1 but cannot connect to my Canon 6000B printer and can't find a driver download on the net - can anyone help on this?

I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?

dino1335 wrote:
Thanks for getting back. I need help here
1 What do you mean by System Information? Is that System Preferences?
System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
dino1335 wrote:
2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
dino1335 wrote:
3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
dino1335 wrote:
FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's.

How to disable the message that pops up every time i connect my iphone "photos in the camera roll of iphone cannot be imported because the device is locked with a passcode"?

Wrongly posted in iPhoto forum, should probably be posted here instead.
I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.

Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them.

Illustrator CS5 crashes every time the destination is changed during save & save as

I have a new Macbook Pro Retina with OS X Yosemite, version 10.10.1.
Every time I try to change the destination folder for a file during "Save" or "Save As" in Illustrator CS5 the program crashes & I get an extensive error message. I have tried uninstalling & reinstalling Illustrator 3 times but the issue persists. I have tried installing it both with the original Creative Suite disk I purchased in 2010 and with the download from Adobe's website, and neither made a difference. I have not experienced any problems with the Photoshop or InDesign programs from the same Creative Suite package.
Please advise on how to fix this issue.
Beginning of Error Report (there's much more but I wasn't sure how useful it would be):
Process:               Adobe Illustrator [397]
Path:                  /Applications/Adobe Illustrator CS5/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:            com.adobe.illustrator
Version:               399 (15.0.2)
Code Type:             X86 (Native)
Parent Process:        ??? [1]
Responsible:           Adobe Illustrator [397]
User ID:               502
Date/Time:             2015-01-04 02:35:58.099 -0500
OS Version:            Mac OS X 10.10.1 (14B25)
Report Version:        11
Anonymous UUID:        7FA53558-D47E-CB6A-7CC3-8C017ACE9B7F
Sleep/Wake UUID:       F663268C-89E9-4BF8-9FB9-105DB01F6612
Time Awake Since Boot: 850 seconds
Time Since Wake:       190 seconds
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_BAD_ACCESS (SIGBUS)
Exception Codes:       KERN_PROTECTION_FAILURE at 0x0000000016752b8c
VM Regions Near 0x16752b8c:
    __IMPORT               000000001674b000-000000001674c000 [    4K] rwx/rwx SM=COW /Applications/Adobe Illustrator CS5/Adobe Illustrator.app/Contents/Frameworks/adobe_caps.framework/Versions/A/adobe_caps
--> __LINKEDIT             000000001674c000-0000000016755000 [   36K] r--/rwx SM=COW /Applications/Adobe Illustrator CS5/Adobe Illustrator.app/Contents/Frameworks/adobe_caps.framework/Versions/A/adobe_caps
    MALLOC_LARGE           0000000016755000-00000000167bb000 [ 408K] rw-/rwx SM=PRV
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.HIToolbox            0x09504025 HIStandardMenuView

same here, new computer today and I got the exact same problem. I wonder if Adobe would do something about it, or just asking us to update and pay more to upgrade to CC

What to do when my iPod does not recognize the songs and then when connected on PC, it crashes iTunes?

Well, it all begin when I finished synching my iPod (classic 120gb) and ejected it through the iTunes. After that, I turned it on, but then it said that the iPod had no music in it. I found that strange, so I reconnected it on the PC (Windows 7), but the iTunes crashed as soon as the iPod os connected and I found that all the songs were inside the iPod (saw the files using the explorer). What can I do now to normalize it?

Try moving the existing backup file to a save location and try again. It is located here:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do

I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do?- I really need help!

It sounds as though you have a corrupt project - or possibly a file within an event that is causing the application to crash.
Quit FCP X, then move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is causing the problem.
Quit the app again, then move one event or project at a time back to the original folder and launch FCP X again - keep going until you find the cause.
Andy

Every Application the connects to the net crashes.

Similar Messages

Maybe you are looking for