Every click in Color takes 10 seconds when Kona monitoring is turned on

As an editor getting asked to do more color correction I've decided to move beyond Colorista and am learning Color. Since I have a properly calibrated broadcast monitor there's no reason not to! But what I am finding is when I have external monitoring turned on in Color, via my Kona LHe, then nearly every click and parameter change gives me about a 10 second beach ball until Color catches up and updates the frame in the interface and on the external monitor. It doesn't happen when external monitoring is off. Certainly not a way to work!
Anyone seen something similar?

I ain't at home either so I can't properly verify software version but i have never had these issues at all.
Aja LHe driver 6.0.3 NDD version.
OSX 10.5.7
QT, 7.4.6, I think????
Color 1.0.4 (isn't that latest pre-1.5 version?)
You might try using the Aja Uninstaller and then reinstalling the software but as you say, this has been happening through various versions, could be a software installation gone bad? Like I say, I've had wonky things happen within Color but nothing involving my LHe.

Similar Messages

I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Charge led blinks every second when Laptop NX9420 is turned off.

I have a new battery, in a HP Compaq NX9420 and it can run the laptop for 2 hours isch,
it can also run it on power adaptor only, battery removed, so both battery and charger is ok.
But,
When turning off the laptop from within windows it goes off and all is normal, after some 3-12 hours the charge led starts to blink amber/orange every second, if I press on/off button nothing happens, I have to remove the battery and slap it in again then it starts,
(after pressing on/off ofc.) the battery is slightly drained what I can see?
checked everything in bios but nothing
tested also HP Battery check and it says all ok.
Motherboard busted?
RTC battery weak? I still keeps track of time and settings bioswise.

Hi,
I don't know people call this but we normally call it as an "handsake", all smart batteries should do this way.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My iPad 3's folders change colors for 2 seconds when I change the orientation. How can I solve this?

I am the only one with this problem? Annoys me a lot. I restore my iPad but didn't solve.
(And sorry for the bad english)

Then the next step would be the Genius Bar...make an appointment by clicking the Apple Retail Store link at the bottom of this page, then Genius Bar in the upper right of the page that opens, then Make a Reservation top center of the next page that opens. Reservation reduces the annoyance at standing around waiting for someone to get free to help you.

Video (VLC and Quicktime) lags when other monitor is turned off

I have a mac mini running 10.6.1 with a dual monitor setup (mini dvi to dvi, and mini displayport to dvi). When i have a video running in either vlc or quicktime on one of the monitors and i turn the other monitor off, the video begins to lag every 3 seconds.
Any ideas what i could do to fix this?

Apparently something was up with my monitor connection. It was pushed in all the way, but when i took it out and put it back in the problem was fixed.

Slow mail = beach ball spins with every click in every field.

This happens since installing Snow Leopard: every click in mail takes 5 or 10 seconds for anything to happen. Reaction was always instant before. Anyone know of any fix?
Examples of when this happens:
When I click on "Forward."
When I click "New Message" to pull up the blank email form.
When I click on the "To" line.
When I click on any other field to compose and send an email.
That is, when I click on anything.
Thank you for any advice.

Some other post (which one?) contained the resolution: Go under the "Mailbox" menu and select "Rebuild" for each account. Count on it taking a while.

InitialContext always takes 5 seconds on a WebLogic Cluster

Hi,
I want to create a context on a cluster to lookup a EJB with JNDI. This works well but it always take 5 seconds, When I put 1 of the managed servers down, it will take even longer.
When I dont use a cluster it is really fast.
I also already changed the cluster algo. but no change in performance.
How can I speed up this initialContext.
thanks
protected static Context getInitialContext() throws NamingException {
Environment env = new Environment();
env.setInitialContextFactory( "weblogic.jndi.WLInitialContextFactory" );
env.setProviderURL( "t3://localhost:7101");
env.setRequestTimeout(1000L);
env.setRMIClientTimeout(1000L);
env.setEnableServerAffinity(true);
env.setProviderURL( "t3://193.176.63.36,193.176.63.37:7001");
env.setSecurityPrincipal( "weblogic");
env.setSecurityCredentials( "weblogic1");
return env.getInitialContext();
}

The problem is the so-called stringification process when you are locating objects. More information about this
process can be found here: http://www.javaworld.com/jw-02-1999/jw-02-enterprise.html and the javadoc
http://download.oracle.com/javase/1.4.2/docs/api/org/omg/IOP/IOR.html
Take the following test case, here we are looking up three different object:
- a JMS connection factory
- a JDBC datasource (for which stringification is done)
- a JMS Queue
The JMS connection factory and the JMS Queue are present in the client classpath, through the wljmsclient.jar.
The code for the test case looks as follows:
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import java.util.Hashtable;
public class Test {
    private static Context context;
    private static Object lookup;
    public Test() {
    public static void main(String[] args) {
        Hashtable hashtable = new Hashtable();
        hashtable.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
        hashtable.put(Context.PROVIDER_URL, "t3://172.31.0.107:7002,172.31.0.107:7003");
        long begin = System.currentTimeMillis();
        try {
            context = new InitialContext(hashtable);
        } catch (NamingException e) {
            e.printStackTrace();
        long end = System.currentTimeMillis();
        long timeseconds = (end - begin) / 1000;
        System.out.println("initialcontext creation time " + timeseconds);
        begin = System.currentTimeMillis();
        try {
            lookup = context.lookup("jms/ConnectionFactory");
        } catch (NamingException e) {
            e.printStackTrace();
        end = System.currentTimeMillis();
        timeseconds = (end - begin) / 1000;
        System.out.println("lookup resource time " + timeseconds + ", object " + lookup);
        begin = System.currentTimeMillis();
        try {
            lookup = context.lookup("jdbc/exampleDS");
        } catch (NamingException e) {
            e.printStackTrace();
        end = System.currentTimeMillis();
        timeseconds = (end - begin) / 1000;
        System.out.println("lookup resource time " + timeseconds + ", object " + lookup);
        begin = System.currentTimeMillis();
        try {
            lookup = context.lookup("jms/VideotheekQueue");
        } catch (NamingException e) {
            e.printStackTrace();
        end = System.currentTimeMillis();
        timeseconds = (end - begin) / 1000;
        System.out.println("lookup resource time " + timeseconds + ", object " + lookup);
        begin = System.currentTimeMillis();
        try {
            lookup = context.lookup("jdbc/exampleDS");
        } catch (NamingException e) {
            e.printStackTrace();
        end = System.currentTimeMillis();
        timeseconds = (end - begin) / 1000;
        System.out.println("lookup resource time " + timeseconds + ", object " + lookup);
        begin = System.currentTimeMillis();
        try {
            lookup = context.lookup("ejb/Videotheek#model.logic.Videotheek");
        } catch (NamingException e) {
            e.printStackTrace();
        end = System.currentTimeMillis();
        timeseconds = (end - begin) / 1000;
        System.out.println("lookup resource time " + timeseconds + ", object " + lookup);
        Videotheek videotheek = (Videotheek) lookup;
        List<Persoon> personen = videotheek.getPersonen(null);
        if (personen != null) {
            for (Persoon persoon : personen) {
                System.out.println(persoon);
}When we run this the following output is generated:
initialcontext creation time 0
lookup resource time 0, object weblogic.jms.client.JMSConnectionFactory@d1fa5
lookup resource time 4, object IOR:0000000000000044524d493a7765626c6f6769632e6a6462632e636f6d6d6f6e2e696e7465726e616c2e52656d6f746544617461536f757263653a30303030303030303030303030303030000000000100000000000005c8000102000000000d3137322e33312e302e31303700001b5b00000090004245410801030000000012566964656f746865656b536572766572320000000000000000000044524d493a7765626c6f6769632e6a6462632e636f6d6d6f6e2e696e7465726e616c2e52656d6f746544617461536f757263653a30303030303030303030303030303030000000000432383200000000014245412a000000100000000000000000379650739d9850a000000006000000010000002c0000000000010020000000030001002000010001050100010001010000000003000101000001010905010001000000190000003b0000000000000033687474703a2f2f3137322e33312e302e3130373a373030332f6265615f776c735f696e7465726e616c2f636c61737365732f00000000001f000000040000000300000020000000040000000100000021000000580001000000000001000000000000002200000000004000000000000806066781020101010000001f0401000806066781020101010000000f7765626c6f67696344454641554c5400000000000000000000000000000000004245410300000420000000000000000c726f756e642d726f62696e00000000000000000f6a6462632e6578616d706c65445300000000000200000044524d493a7765626c6f6769632e6a6462632e636f6d6d6f6e2e696e7465726e616c2e52656d6f746544617461536f757263653a30303030303030303030303030303030000000000100000000000001a0000102000000000d3137322e33312e302e31303700001b5b00000090004245410801030000000012566964656f746865656b536572766572320000000000000000000044524d493a7765626c6f6769632e6a6462632e636f6d6d6f6e2e696e7465726e616c2e52656d6f746544617461536f757263653a30303030303030303030303030303030000000000432383200000000014245412a000000100000000000000000379650739d9850a000000005000000010000002c0000000000010020000000030001002000010001050100010001010000000003000101000001010905010001000000190000003b0000000000000033687474703a2f2f3137322e33312e302e3130373a373030332f6265615f776c735f696e7465726e616c2f636c61737365732f00000000001f000000040000000300000020000000040000000100000021000000580001000000000001000000000000002200000000004000000000000806066781020101010000001f0401000806066781020101010000000f7765626c6f67696344454641554c54000000000000000000000000000000000000000044524d493a7765626c6f6769632e6a6462632e636f6d6d6f6e2e696e7465726e616c2e52656d6f746544617461536f757263653a30303030303030303030303030303030000000000100000000000001a0000102000000000d3137322e33312e302e31303700001b5a00000090004245410801030000000012566964656f746865656b536572766572310000000000000000000044524d493a7765626c6f6769632e6a6462632e636f6d6d6f6e2e696e7465726e616c2e52656d6f746544617461536f757263653a30303030303030303030303030303030000000000432383200000000014245412a00000010000000000000000073e6496c7f4c736900000005000000010000002c0000000000010020000000030001002000010001050100010001010000000003000101000001010905010001000000190000003b0000000000000033687474703a2f2f3137322e33312e302e3130373a373030322f6265615f776c735f696e7465726e616c2f636c61737365732f00000000001f000000040000000300000020000000040000000100000021000000580001000000000001000000000000002200000000004000000000000806066781020101010000001f0401000806066781020101010000000f7765626c6f67696344454641554c540000000000000000000000000000000000000000001ce4c409
lookup resource time 0, object VideotheekModule!VideotheekQueue
lookup resource time 0, object IOR: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 you can see the objects that do need to be stringified (what a word) do not take long to lookup but the datasource (weblogic.jdbc.common.internal._RemoteDataSource_Stub) does.
The second time the datasource is looked-up it uses the already calculated stringification.

I'm on Firefox 3.6.8 running on a 2008 IMAC with OS 10.5.8 yet every click to move pages, from start-up, to return to Home Page takes minutes, not seconds! If I use Safari that's greatly faster on this same set-up. How do I get Firefox to be as fast ?

I'm on Firefox 3.6.8 running on a 2008 IMAC with OS 10.5.8 yet every click to move pages, from start-up, to return to Home Page takes minutes, not seconds! If I use Safari that's greatly faster on this same set-up. How do I get Firefox to be as fast ?
== Some time back, beggining with Firefox updates, at least three, or more updates ago.

Thanks for the tip. I took the following steps:
1) Backed up the existing profile (presumably corrupted somewhere);
2) Deleted the existing profile;
3) Moved the existing Firefox to the Trash and downloaded a fresh copy;
4) Started Firefox (thus allowing it to create its default profile)
5) Copied the following files from the backup copy of the previous profile: places.sqlite, key3.db, signons.sqlite, permissions.sqlite, persdict.dat, cert8.db ---
I'm posting this from a Firefox browser, so I guess I'm OK now.

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

EOS 60D. When I press the shutter release it may take a second or two before it activates

I have an EOS 60D. When I press the shutter release it may take a second or two before it activates or it may activate instantly. In the past it has activated instantly every time. In all cases the camera has previously been focused. This is a new development after having the camera for a couple of years. What’s going on ?

Another possibility is focus.
When the camera is in it's default "One Shot" mode it uses something called "focus priority". When focus priority is active it means the camera will NOT take a photo until it can confirm that it has locked focus on at least one AF point.
You could test this by just switching the lens to manual focus mode (set the AF/MF switch to the MF position). That should cause the camera to take the shot instantly -- every time -- provided you haven't enabled a delay timer.
You can change modes by ensuring the lens is attached and in the "AF" position (autofocus is enabled). Then press the AF button on the top of the camera and use the menu to select "One Shot", "AI Focus", or "AI Servo".
The two real modes are "One Shot" and "AI Servo".
"One Shot" causes the camera to focus until it locks focus... and then the focus system switches off while it waits for you to fully press the shutter and take the shot. It's intended for situations where you are photographing non-moving subjects. If you fully push the shutter immediately (without half-pressing to let the camera focus first) then you'll have a delay while the camera focuses.
"AI Servo" is used for situations where the subject distance is constantly changing. But this mode uses something called "Release Priority" which means the camera WILL take the photo as soon as you fully press the shutter button and will do this whether focus was locked or not. The camera begins focusing when you half-press the shutter... and it never stops checking focus.
The camera will take longer to focus depending on which lens you use, the amount of available light on the subject, and how much contrasty detail the subject has (the camera will struggle to lock focus on subjects which lack contrast -- such as pointing it up to a plain blue sky -- even if it's bright.)
Camera lenses keep their aperture blades fully retracted while you frame and focus the shot. The blades only stop down in the fraction of a second before the shutter opens. But if you have a variable focal ratio lens (e.g. an f/3.5-5.6 for example) and it's at the f/5.6 end, and lighting is poor, etc. then you make the camera work a bit harder to focus.
Tim Campbell
5D II, 5D III, 60Da

HT1338 why does my imac keep making a noise every 30 seconds when I am not using it?

My iMac keeping making a sound (sort of a clicking sound) every 30 seconds when I am not using it. It is very annoying; is therre a way to stop it?

Bring it in to service, and ask them to tell you what the noise is. Sometimes it just is the optical drive realigning itself. It could be the sign of a dying hard drive. Only they can tell the difference.

Two questions: First, the homepage button on my browswer has stopped working. Once clicked, nothing happens. Second, when I try to upload pics to blogger, it says "Server Error".

The homepage button has stopped on both my desktop and netbook browser, as about about a week ago. Once clicked, nothing happens. Yet all other browser buttons are working fine. Second, when I try to upload pics to blogger, it says "Server Error".
The server error message on blogger happened about the same time, and although there have been rare occasions where it worked, but mostly it doesn't. I've tried a couple of times every day, and it's only worked twice. But I am able to do it on other browsers, leading me to believe it's a firefox problem. (For the record, blogger seems to have recently updated their pic upload feature).

This usually happens if Spotlight is disabled on a drive. When you tried MacPilot, did it have an option to disable Spotlight? I haven't used the app, so don't know whether that is the case or not, but if it did and you inadvertantly, or even deliberately, disabled Spotlight then the Finder won't display anything but the most basic information about a file--thus you won't see dimensions or Last Opened, just size and dates created and modified.
Francine
Francine
Schwieder

Hi there, I want to change the background-color of the browser, when a popup-picture is shown. This picture pops up by clicking a hyperlink in the text...can anyone help me please...thanks a lot

Hi there, I want to change the background-color of the browser, when a popup-picture is shown. This picture pops up by clicking a hyperlink in the text...can anyone help me please...thanks a lot

Hi,
CSS is interpreted by your browser, so server cache seems unlikely in htis case. There is however some hierarchy in CSS, so parts of the APEX CSS, theme CSS or page CSS might overwright or block yours.
Does changing the CSS on runtime affect your page? Eg, run the following in your browser console and see if your page turns black: $('#uBodyContainer').css("background-color","black")
Also try moving up your css in the hierarchy labeling it as important:
div#uBodyContainer {
background-color:#000000 !important;
See:Assigning property values, Cascading, and Inheritance
Regards,
Vincent
http://vincentdeelen.blogspot.com

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem.

When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?

What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down?

Firefox frequently freezes for 30-60 seconds when I click on bookmarks, bookmark buttons, almost anything really.

Firefox frequently freezes for 30-60 seconds when I click on bookmarks, bookmark buttons, almost anything really. It has been doing this ever since I downloaded the latest update (7.0.1). It is really frustrating. Can you please help?

You will also notice that your shift key will be emulated. Meaning that keys you will try to press will press but they will act like you are pressing the shift key when you are doing them.
Try this, minimize the firefox window by pressing the tab on your taskbar. After doing that maximize it again. You will magically be able to click any link on your page. When you navigate to a new page however, the entire situation will start all over. My only remedy is rebooting and hoping it doesn't happen again soon.

Every click in Color takes 10 seconds when Kona monitoring is turned on

Similar Messages

Maybe you are looking for