Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.
Every device (iphone4, iphone4s, ipad2) I try to hook up to iTunes gives me a message "this device cannot connect because the apple mobile device service is not setup" does anyone have ideas as to why it keeps popping up? It just started doing this.
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Similar Messages
-
my Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc. -
When I try to use my iphone with itunes it reads that my iphone cannot used because the apple mobile device service is not started
See:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Any ideas what I must do when I want to synch my ophone to my computer the following message keeps poopping up: This iphone cannot be used because the Apple Mobile Device service is not started? I am not sure how to proceed. Hepl please....
take a look at this link http://support.apple.com/kb/TS1567
-
I keep getting the message "iod cannot be used because the apple mobile device service is not started" when i try to sync my ipod to my desktop itunes library.
See:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
why every time i connect my iphone to my computer said: this iphone cannot be used because the apple mobile device service is not started
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Hi, I'm getting a new and confusing message when I connect my Ipad/phone to my laptop: "This iphone cannot be used because the Apple Mobile Device Service is not started" ... any idea, anyone, how I get out of this cul-de-sac. Brian
try this http://melchoi.wordpress.com/tag/this-iphone-cannot-be-used-because-the-apple-mo bile-device-service-is-not-started/
Hope it's gonna help -
When plugged inmy iphone 4 in to itunes this message appeared:THIS iPHONE CAN NOT BE USED BECAUSE THE APPL MOBILE DEVICE SERVICE IS NOT STARTED. What does this mean. my phone is 9 months old and in full service as far as I know. please Help
See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567 -
On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.Try Here > AMDS > http://support.apple.com/kb/TS1567
-
Why can't I sync my iPad to pc, it says this iPad cannot be used because the Apple mobile device service is not stated, the last time they were synced was December and I had no problem.
Log in as an Admin User on your PC. Type 'Services' in the search area above when you click on start. (or see control panel and select Admistrative Tools.)
Select the Services shortcut. In the window that appears with your listed service, navigate to ipod service, Apple Mobile Device service, and, Bonjour Services. Doubleclick them to get the property page. Change startup to automatic, click apply. Then click start,
There is a known issue that when iTunes updates it incorrectly sets the Service startup type - this is normally due to installations on Vista and win7 services and drivers that run in the Local Sstem requiring Admin account permissions that are not always granted with User Account Elevation, when running installations or updates in User account.
Normally the Local System is set to inherit the User account permission token when being set up - but Apple in their infinite wisdom have a higher token in place for their services. so a standard user cannot derogate the required elevation, even with the UAC to admin prompt, since the local system is owned by the Machine account and only Admin, bBackup, Restore, Machine, operator accounts carry the same descriptor permissions on process ownership to set these services correctly.
Third party security programs, such as Kaspersky can also limit installations by User account installations, which adds to the problem. I have had a few installations fail, even in Admin mode - because Kaspersky sits on par with the Main Machine Administrator account for watching program and installation directories and registry keys - (which have higher privilege levels in some respects than the ordinary Admin account you normally start a new machine in before you add any other user accounts- all very confusing - but that's Microsoft all over for you.
Follow Ralph's advice if you do not have the necessary software already installed. You should install Apple's Application Management Software - which will look after the installation of all required elements for you and notify you of updates pending. In options have it set to Notify only - not all updates may be requred, and this option allows you to see what is being installed. It is good practice to set all updating software to Notify only - especially any thirdparty software - much of which carry all sorts of little 'extra's' you may not need or want.
It is also good practice to keep an eye on your Program and Features option in control panel, just to see what is being installed and when - including Windows updates.
Sorry about the long reply, but with December being your last sync - a lot can change in the meantime. Best be prepared.
Best wishes, Ct -
i replaced my apple iphone4,Because that having some technical problems.but when i get new iphone4 that does't have the previous contents that is my contacts,purchased items etc...,but the backup cd is in my hand and also my itunes having the whole content but the device is connecting to my pc,getting this message that is THIS IPHONE CANNOT BE USED BECAUSE THE APPLE MOBILE DEVICE SERVICE NOT STARTED.
Please give me a solution
thank youTry the information in this Apple Support Document. http://support.apple.com/kb/ts1567
-
I-tunes keeps telling me that this ipod cannot be used because the apple mobile device service is not started. It was previously working and syncing, but now windows doesn't seem to be recognizing it. What can I do?
Hi there! You can fix this error by doing the following:
1) Click your Start button in Windows, and click "Run".
2) In the box that appears, type "services.msc" (without the quotes) and hit enter. A new window with a big list will appear.
3) Find "Apple Mobile Device" service in this list, right-click it and go to "Properties".
4) In the window that pops up, make sure that drop-down box is set to "Automatic", then click the button that says "Start". A progress bar will briefly appear and disappear and it will be started. Click Apply/OK.
5) Try running iTunes again, it should work! -
When I plug my iPod Touch 4g into my computer I get a pop-up that says "This iPod cannot be used because the Apple Mobile Device service is not started." And when I plug in my iTouch the name of the iTouch does not come up on my iTunes. How do I start the Apple Mobile Device? How do I fix this?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
When I plug in my iPod, a little window pops up on iTunes stating that I cannot use the iPod cannot be used because the apple mobile device service is not started. What do I do?
See Here...
AMDS for Mac > http://support.apple.com/kb/ht1747
AMDS for Windows > http://support.apple.com/kb/TS1567 -
I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?
See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747
Maybe you are looking for
-
How do I hide the blank week between months on the iOS calendar app?
I keep double booking appointments near the end of each month because it appears (at a glance) that next week is open and available. How can I get the app to hide (not show) a blank week between each month? Thank you.
-
How to display a simple rss feed?
Hi, I've build a simple application that has a httpservice called rss that calls "http://www.nytimes.com/services/xml/rss/nyt/GlobalBusiness.xml" and retrieves the rss feed. Under test operation I can see it returning the feed. When the init() functi
-
Hi all, Today my Shft Option drag is not working. When I click on an object and hit shift-option and drag the object, it should move in a horizontal or vertical direcion, but it does not. When I hold the shift key, the object can still be moved in an
-
HP Photosmart B110 series wont print over wifi after OSX 10.8 upgrade
My HP Photosmart B110 series worked fine with OSX ML, after move to 10.8 - nothing. Software update installed an HP update, found the printer which it marked IDLE, then when you testprint/print, is says........Printer can't be found!?! Have removed
-
Hi Expert Is it possible to set a default value in "Insp.End Date" at QA01 ? I'd like to put "Start Date" + 7 days into the End date. I was trying to use User-Exit but I failed to make it. Please kindly let me know how to use it.