Every evening i keep losing my broadband connectio...

Every evening i keep losing my broadband connection and when i can finally get it to reconnect it is extremely slow. worse than the broadband i use to have. wish i never changed to bt

1. Product name: BT Home Hub
2. Serial number: +068343+NQ43242176
3. Firmware version: Software version 4.7.5.1.83.8.204 (Type A) Last updated 21/01/15
4. Board version: BT Hub 5A
5. DSL uptime: 0 days, 00:39:21
6. Data rate: 6183 / 29283
7. Maximum data rate: 6171 / 28586
8. Noise margin: 6.0 / 6.0
9. Line attenuation: 28.2 / 27.4
10. Signal attenuation: 28.1 / 24.3
11. Data sent/received: 665.3 MB / 8.2 GB
12. Broadband username: [email protected]
13. BT Wi-fi: Yes
14. 2.4 GHz Wireless network/SSID: BTHub5-TFJG
15. 2.4 GHz Wireless connections: Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security: WPA2
17. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID: BTHub5-TFJG
19. 5 GHz Wireless connections: Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security: WPA2
21. 5 GHz Wireless channel: Automatic (Smart Wireless)
22. Firewall: Default
23. MAC Address: c8:91:f9:55:77:c4
24. Modulation: G.993.2 Annex B
25. Software variant: AA
26. Boot loader: 1.0.0

Similar Messages

Keep losing connection every 15 minutes

As the topic say, I keep losing connection about every 15 minutes, which has been ongoing
for more than 24 hours. This is starting to get on my nerves, I'm running a business and every
time I get cut out, I lose a lot of money. BT Infinite suppose to be relyable and stable
and here I am with this flashing modem, paying 45 pounds a month for this **bleep**. This is not the
first time this is happening, what the F are you going to do about it?
I would like to cancel my contract before it runs out, since you are not delivering what promised.
Im relying on a stable connection.
Very annoyed customer

are you a business broadband customer? if so you need to post here as this is a residential forum https://business.forums.bt.com/
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Why does my iPad keep losing the wifi every few minutes?

Why does my iPad keep losing the wireless connection every few minutes?

Could be
1 the routers firmware require an Update
2 the iPad is defect

Why does my mouse keep losing connection every minute

why does my mouse keep losing connection every minute, its not the batteries

I'm having the same issue. Every so often it loses connection then re establishes. This goes on repeatedly.
If you change batteries while the computer is still active then it takes for ever to re connect.
Can't wait until someone replies to your question.

ITunes keeps losing my library every 2-3 days!

iTunes keeps losing my library every 2-3 days. Completely erasing all songs and playlists. This is incredibly annoying and forces me to redo it all AGAIN.
Any way for me to solve this problem?

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

TS1398 iPad 2 keeps losing wifi connection about every 3 minutes no matter where I am in my house. Very annoying. help?

iPad 2 keeps losing wifi connection about every 3 mins no matter where I am in the house - Help?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

After updating to ios 8 i keep losing my internet connection, and have to restart every time?

After updating my ipad mini to ios 8, i keep losing my internet connection and have to restart.

Hi Turn Router off for 30 seconds Goto Settings Reset Network Settings After reset you need to enter your router wireless key. Also later check on website for a Firmware update for your router. Cheers Brian

Keep losing broadband

I keep losing my connection, i stay connected to the router but we lose the internet. Is there anything i can do to fix it or do i have to have someone come out to fix it

Drusella84 wrote:
I keep losing my connection, i stay connected to the router but we lose the internet. Is there anything i can do to fix it or do i have to have someone come out to fix it
If you happen to have a 510/589 RG, IPv6 can be causing disconnects, reboots and browsing problems. Disable it in the RG UI.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

I got a replacement iPhone 4s, and now it keeps losing service

My last phone dropped in the toilet, so I got a replacement phone cause i had apple care.
When I got this phone i was having problems, but i got help and i fixed it, but now....
It keeps losing service ALL THE TIME...
it goes from Verizon 3g to no bars and just Verizon, and then to "Searching...."
I KNOW ITS NOT MY COMPANY'S FAULT, because verizon is well and it is not like in the mountains where i don;t get service its like all the time and it happens seriously like every 2 minutes, its really annoying because
my messages won't go through
apps wont open or reload
can't make calls
SO YEAH,
please anyone help me please.... <3333

nikkibabyyy7 wrote:
I KNOW ITS NOT MY COMPANY'S FAULT, because verizon is well and it is not like in the mountains where i don;t get service its like all the time and it happens seriously like every 2 minutes, its really annoying
Then why are you even asking here. Obviously you know Verizion could never possibly have network issues.
Every network has issues from time to time, no network, company, or person is perfect.
Try basic troubleshooting from the User's Guide and contact Verizon to ensure they are not having issues.

Keep losing the remote speaker selector

My wife has a G4 iBook running 10.3.9 and is running the latest version of iTunes (6.0.5 I think). We have an Airport Extreme base station and 2 Airport Express units to stream music throughout our house.
My wife keeps losing the selection button on the lower right side of her iTunes used to select the remote speakers. The only way I have been able to get it back was to delete the com.apple.itunes.plist file and then restart iTunes. After answering the few questions it asks the selection button reappears. I have to repeat this every few days. Even though the button is gone she has full network access through the Airport Extreme.
I have a G5 iMac and I do not have this problem with my iTunes. In fact, on several occassions, when her selection button disappeared I immediately checked on my system and the button was there.
Any thoughts what is causing this?
Thanks,
David

I spent some time in the Network Manager and tried to force a statis IP address for her iBook. I couldn't get the static IP address to connect to the Inrternet and have since gone back to DHCP on her machine. That seems to have fixed the problem. I suspect the was an address "stuck" in her setup which has now cleared.

I have a brand new iMac (late 2012) that keeps losing its internet connection

I have a brand new iMac (late 2012) that keeps losing its internet connection - like every five minutes. I have had it for three weeks. During the first two weeks, it worked flawlessly. However, just as the refund period ended - it became desktop dead weight. Suggestions?

did u ever get a solution to this? I have the same 2012 mines 27". It drops after sleep sometimes and can't find anything. Wifi. Connection to the Internet. I pull up network assistant it just gives me blank stares and restart everything. It doesn't even see the time machines and they are still there. I have it right now in full error and my iphones allowing me to see everything as connected and I'm posting here in the forum while my iMac cannot. Doesn't happen all the time. Not sure why it happens or what's goinng on with It. Works great and then sudden wifi failure to recognize.

Deskjet 3520 keeps losing connection to Mac

Last night, I installed an HP Deskjet 3520 printer to use with my desktop Mac (which is using OS Yosemite). I have an etsy shop where I sell prints of my illustrations, so I often have to print out multiple files in a row. When I installed the driver last night, I was able to wirelessly print the test page, but after that, I could not print wirelessly. Instead, I used the USB connection, which worked fine. I printed a round of prints and everything worked fine.
This morning, I need to do some more printing, and my Mac reported that there was no connection to the printer (even though the printer was connected via USB). I deleted the printer from my Systems Preferences Printers and re-added it, and I was finally able to do my printing (still not wirelessly).
Now, tonight, I have tried to do more printing and the Mac reports that there is no connection to the printer, USB or wireless. I tried deleting from Systems Preferences and re-adding again, but that didn't work this time. Then, I tried resetting the printing system, uninstalling HP, and re-installing the driver. Now, I'm at the part of the installer where the device needs to be configured and I am receiving the message:
Device Not Reachable. The wireless network settings were successfully downloaded to your device. However, your Mac was unable to locate the device on the network.
I don't know what keeps going wrong! The little screen on my printer says it is connected to my wireless network AND I am still connected via USB so I don't know how the device would not be reachable. I also don't know why the printer would keep losing connection with the computer every time I need to start printing again. Please help!!

Hi @tylertot
This is in deed a little strange, but I'd like to help! Some of the steps I am going to offer are steps you have done, but I;d like to perform the following steps in the order presented to see what happens. Please give the following a try;
Leave the printer on and unplug the power cable, also unplug the USB cable. Restart teh Mac and then plug the printer power cable back in. You can also go ahead and reconnect the USB cable.
Reset Printing System - (I know you did this already, thus you know how, but here are the steps for others who may view this thread)
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions - I don't see that you have tried this yet, and this step might be crucial to resolving the issue.
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver. You can add the wireless or the USB, or Both. If you ad both, I suggest adding a name to identify one connection from the other.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
You can see in the image above where the name section is, if you add both connection types simply add USB to the beginning of one of the names.
Adding both printers and naming them to help identify them helps when it comes time to print. When you print something you can choose the printer with the appropriate connection type. For example, you can choose the wireless driver ad if you get an offline message try printing again but choose the USB driver. If the USB one works you will know the issue is related to the Wireless connection, and if it doesn;t then the issue is related tot he operating system. Really this is just a proactive troubleshooting attempt in case issue arise in the near future. If you only want to add one connection type that is okay too.
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Library keeps losing songs

This question has been asked before, but I've never seen an answer to it. My iTunes library keeps "losing" songs - I get the exclamation point and it tells me it can't find the song. There seems to be no rhyme or reason to it; the songs are where they always have been, no names or locations have been changed. I've had songs I just added to the library disappear the very next time I open iTunes. I have my iPod set to "Manually Manage Music" so at least I'm not terrified every time I plug it in that I'm going to lose my music, but it's very annoying to keep having to find the same tunes over and over...Does ANYBODY know why this happens?

Unbelievable.
I have the same problem. Well, the songs are not really lost, but iTunes just gets confused about the correct path to the file. This may be related to handling of names. E.g., I have two folders for the B52's in my iTunes libraries, one is "The B52's", the other just "B52's". Maybe I even have a 3rd one, "B52's, The". Or an album appears twice, once in the folder "Compilations" and once in the folder "Various artists". The missing files are ever in one of these multiple locations. But iTune seems to use a wrong one. And there is no easy way to fix it. It needs to be done manually, song by song and takes easly 30..60 seconds per song. Blurp!
I have upgraded to the new iTunes version, yesterday. And got a few 100 songs declares as "missing".
To find out if you have any missing songs, just select all songs in your library via CTRL-A and press CTRL-I afterwards, then OK. All "missing" songs will get marked by an exclamarion mark .
This is a serious issue. I can't believe that it is ignored by Apple. Sorry, Apple, your stuff costs some extra money. I expect it to work. But iTunes - obviously! - doesn't.
Just unbelievable.

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

Every evening i keep losing my broadband connectio...

Similar Messages

Maybe you are looking for