Every link I click. It opens in a new window. Just started randomly Tonight when I woke up my computer.

So as above. I assume there there is a box to click that turns off "open link in new tab". But I can't find it.

Type '''about:preferences'''<Enter> in the address bar.
Select '''General.''' Then go to the '''Tabs''' section.

Similar Messages

  • For some reason if I click a link that needs to open in a new window, the new window is blank. This just started happening when firefox updated itself last time

    Ever since firefox automatically updated itself, I am not able to open websites in new windows - meaning that if I am on a website and you click a link on it that opens in a new window, that new window is blank. It used to work perfectly. I even checked my foxit reader and that it working well

    Hello Angelika.
    I should bring your attention to the fact that your user agent says you're using Firefox 3.6, not 3.0. I will remind you that Firefox 3.0 has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems.
    As for your problem, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • I need to just double click on every folder and have it open in a new window every time, as before. Can I do that?

    I need to just double click on every folder and have it open in a new window every time, as before. Can I do that?

    Finder -> Preferences -> General -> uncheck "Open folders in tabs instead of new windows"

  • How do I get a link or shortcut to open in a new window each time?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/776534]</blockquote><br>
    How do I get a link or shortcut to open in a new window each time?

    You can press and hold the Shift key while left-clicking a link to open a link in a new window.
    See also Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

  • With acrobat 7, how do I make links (within the pdf) open in a new window-tab?

    With acrobat 7, how do I make links (within the pdf) open in a new window-tab?

    No love? From anyone?

  • Everything I click on opens in a new window, How do i fix this?

    EVERYTHING i click on opens in a new window. even when checking email or whatever I click on the email a new window opens, then I click to go back to emails and a new windows opens. everything I do a new window opens it is super annoying. anyone have nay idea how to fix this?? I am really computer stupid in this department...HELP!!

    Under Preferences > Content > checkmark "Block pop-up windows"
    Under Preferences > Tabs > checkmark "Open new windows in a tab instead"
    That may not solve all your problems, but it should make it a lot less annoying.

  • When I click images or links that should automatically open in a new window, instead a new blank window opens.

    For some time now and after firefox has automatically been updated a few times, I click on images or links which are supposed to open in a new window automatically. A new window opens but it is blank with no toolbars, just an adress bar with nothnig in it.

    mha007, Thank you. I walked through your suggested solutions and finally disabled all add-ons and restarted them one by one. The culprit seems to be ViewSourceWith 0.8.11. Interestingly when it is enabled I had to go to TaskManager to force Firefox to quit.
    Maybe this information will help others. I don't know if the cache clearing etc helped but I would suggest that others start but Bringing up Firefox in Safe Mode (hold shift when you select the icon), disable all add-ons and then start them one by one.
    Of course if you have ViewSourceWith maybe you should just disable it first rather than go through the tedium of restarting each add-on separately. To get to the add-ons when it won't open from the toolbar type about:addons in the address area.

  • How To Make Links In A .PDF Open In A New Window

    Hello,
    I am using Acrobat Pro 10 to create a fillable employment application. At the top of the main application, I want people to be able to click and be redirected to another .PDF file I have hosted on my site that they will need to fill out in addition. So, I have used the link tool, but this closes the main pdf application and opens up the new pdf in its place. This is very problematic, because it clears out all of their data in the previous main application. So, I need the link to open in a new window and not in the same one as the original form. Is this possible?
    I have tried using the Java work around explained in this article: http://mythinkpond.wordpress.com/2009/11/04/opening-a-link-in-a-pdf-document-in-a-new-wind ow/
    However, when I do this, and upload it to my site the link doesn't do anything. When you click above the word where the link should be, it doesn't show the finger pointer and doesn't do anything when clicked.
    Any ideas? I greatly appreciate any help...

    That makes sense. So I guess it looks like I have 2 options.
    1. Put the JS short code in and have it open the link in a new window if the user opens it in adobe. If a google chrome user opens it in the default viewer, they wont be able to use the link at all.
    2. Leave the link how it is, and it will be usable in both viewers, but will not open it in a new window.
    I am sureprised that opening the link in a new window isn't just an option in Acrobat Pro. I wouldn't think you'd have to make a workaround like this.
    Is there an alternative way to have a page link on the form so that people can go to another .pdf whil keeping the main one open?

  • Link List Explorer NOT Opening In A New Window

    Hi All,
    I am trying to force my KM linklist links to open in a new window and this is proving to be a hard feat!
    I have navigated to System Admin --> System Config --> Knowledge Management --> Content Management --> Configuration --> Content Management --> User Interface --> Settings --> Resource Renderer Settings --> Link List Resource Renderer.
    Within this area, I have changed the Target Window Type to "blank" and "fixed" amongst other options but it is not opening the new links in a blank window.
    Instead, it opens the KM folder in a new window and when I click on a link within that folder, it opens in a new portal window complete with Portal framework.
    All I want is for my links to open in a new blank window with no Portal framework.
    Any ideas?
    Thanks,
    Bim.

    Hi,
    It's known bug. this issue fixed in 11.1.1.7.0 (coming soon).
    bug 13852263 - ACTION LINKS - NAVIGATION TO BI REPORTS DOESN'T WORK ( OPEN IN NEW WINDOW)
    for now : to uncheck the "Open in New Window" checkbox and go to the detail report in the same Window.
    Note: this bug has been fixed by applying the patch 14003822 (u need to get the latest patch)
    Thanks
    Deva
    Edited by: Devarasu R on Feb 14, 2013 4:05 PM

  • When I try to open a link (which would automatically open in a new window), for example a larger image, or a link etc, it opens but will not load. It either refuses to load or, in the case of an image, says 'stopped'.

    As I say, since I updated to 3.6.15 I am unable to open links off a webpage that should open in a new window, or even open enlarged photographs in a separate window. Either, in the case of the latter, I get the message "stopped" in the bottom of the browser window, or in the former case it either appears to begin to load the new page but then stalls. Sometimes I don't even get this, but end up with "(Untitled)" appearing in the tab label.
    As you can imagine, this is causing a great deal of problems and I am keen to sort it out asap.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • How do I make a link to another webpage open in a new window?

    Hello Everyone,  I am at a loss as to how to do this.  I'm not a developer, just someone who updates simple things on my website.  I thought I took care of this a couple of weeks ago, but whatever I did it does open the link in a new window while opening it in the window my site is in too, which defeats the purpose.  I can't find how to correct this in Help.  Any help would be greatly appreciated.  Pamela

    Select the text you want to open the pop up window
    In the Property Inspector,                         type javascript:void(0) into the Link field.
    http://www.cbtcafe.com/dreamweaver/popup_text/index.html
    Additionally, you have quite a few code validation errors on your page that are caused by using XHTML strict document type with HTML style closures. You may want to fix these.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.theeleganttightwad.com%2FEffo rtlessSavings.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • Having trouble making my links to other sites open in a new window

    On iWeb, on my Links page, I have ticked the box to 'open links in a new window' s that viewers aren't directed away from my set, however, when I visit my site this ahsn't worked - any idea what else I need to do?

    What's the URL of your site so we can examine it first hand?
    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - reboot, launch iWeb, reset the links in the Inspector pane and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • I just upgraded to 6.0 and links that want to open in a new window do not work. Right click and selecting open in new window does work.

    Similarly clicking a link in email does not open a window. I can drag the link to Firefox and a new tab opens.
    Also clicking Tools -> Add-ons does not open a tab as it used to.

    mha007, Thank you. I walked through your suggested solutions and finally disabled all add-ons and restarted them one by one. The culprit seems to be ViewSourceWith 0.8.11. Interestingly when it is enabled I had to go to TaskManager to force Firefox to quit.
    Maybe this information will help others. I don't know if the cache clearing etc helped but I would suggest that others start but Bringing up Firefox in Safe Mode (hold shift when you select the icon), disable all add-ons and then start them one by one.
    Of course if you have ViewSourceWith maybe you should just disable it first rather than go through the tedium of restarting each add-on separately. To get to the add-ons when it won't open from the toolbar type about:addons in the address area.

  • Clicking a link in portal favorites opens in a new window?

    Hi
       I added few pages to my favorties and when i click on the the link in favorites, it is opening a dialog with "download" and save buttons. I donno why it is happening like that.
      could some one help in this regard??
    Thank you

    hi,
    we have the same problem. We are on EP6 SP13, IE 6.0.
    We can't solve it. Eighter with client-caching nor without caching.
    On click on a favorite the ie-dialog ist coming out for open oder save the destination. When I choose "open" nothing happens.
    Thanks!

  • Folders open in a new window

    Since I upgraded from Tiger to Leopard, every folder I click on opens in a new window.
    I have checked Finder Preferences and the "always open folders in a new window" check box is unchecked.
    Does anyone know how to correct this irritating problem?
    Thanks.

    Bat21 wrote:
    Since I upgraded from Tiger to Leopard, every folder I click on opens in a new window.
    I have checked Finder Preferences and the "always open folders in a new window" check box is unchecked.
    that's the box that controls this. try checking and unchecking it. if that does not help delete the file /users/username/library/preferences/com.apple.finder.plist and then control-option-click on Finder in the Dock and choose "relaunch". this will reset your finder preferences to the defaults and should fix the problem.
    Does anyone know how to correct this irritating problem?
    Thanks.

Maybe you are looking for

  • How do I add a step to run at the beginning of an existing task sequence?

    I need a way to add a step to run at the beginning of an existing task sequence like you see up above. We need to do so to all task sequences that install software in our environment. I understand PowerShell very well but, I am not sure of how I woul

  • SOAP to JDBC/RFC  - RFC/JDBC  to  SOAP XI Scenario

    Hello, Can anybody give me the links for SOAP to JDBC/RFC-BAPI or RFC-BAPI/JDBC ---> XI ---> SOAP XI Scenario? I tried searching, but there isn't any step-by-step approach for it. Thank you in advance. Cheers, Deepak.

  • Photoshop 7 - CS3 Clipboard Issue

    I have been having this problem with Photoshop 7.0 for a while, where I cannot paste from "Windows" to Photoshop. I often use print screen, and while Paint can paste the screenshot no problem, Photoshop does nothing. I found a solution that said to a

  • EDI Workflow for errors and TEDE5

    Not sure this is the exact right place to ask this question but it concerns workflow.  I just need to know how can I start or stop workflow from happening for edi errors.  Either inbound or outbound.  I have discovered there has been code placed in t

  • I have error 40 how can i resolve this?

    Hi I have error 40 on my iphone 3gs how do I resolve this. I have tryed uninstalling update from itunes, restarting com. Not Sure what else to do>