Every object with a plain color y create or place in my document appears as if it has 50 % opacity
I have a problem. If i create an object or if i place it from illustrator it gets mixed with the background as if the opacity was like 50%, i have the opacity and transparency tab opened and it shows like 100%, i have checked the options of the object and the transparency there is algo 100% but the colours are not solid.
I am using InDesign CS5
Did you check blend mode?
Bob
Similar Messages
-
I have a gradient mesh object which uses 2 spot color values (including some tints of those 2 colours) which I'd like to print as a 2 color print job. Is this possible? If not, any suggestions as to how I should proceed? The print job MUST be 2 color. Ideally I don't want to use raster objects but if I have to would appreciate any advice on the easiest way to transform my 2 color mesh object into a matching duotone raster object.
I'd really say it's that PPD with the new n-space features of CS3 and CS4. If I use your PPD I get the same shoddy results you do with the postscript file. In fact, Acrobat Distiller errors with a log...
<PDFX ISO="15930-1:2001" COMPLIANT="false">
PDF/X Compliance Report
1. Color
The following pages are separated plates:
Page 1, Occurrences: 1
Page 2, Occurrences: 1
Page 3, Occurrences: 1
Page 4, Occurrences: 1
Violation. The use of %%PlateColor is not permitted and was found in the document. Occurrences: 7
Violations: The total found in this section was 11.
2. Summary
Warnings: The total found in this document was 0.
Violations: The total found in this document was 11.
This document does not pass PDF/X-1a:2001 compliance checks.
</PDFX>
%%[ Warning: Did not pass PDF/X compliance tests. No PDF file produced. ] %%
If I use your PPD, print your AI file to a postscript file, then simply open the resulting Postscript file with AICS4, I see the same bad results that I showed in the movie. I think the PPD can't handle the new method of breaking out spots in gradients. Just to test this theory... try a different PPD and see if that works, at least to show the seps properly. -
Create BO Event via Change Document
Hello gurus
I'm having some trouble creating an event via a change document for a custom Z table. I've already followed the steps outlined in help.sap.com:
1. Created the change document for the z table and generated the program.
2. Made the Z table and its data elements relevant for change documents. Did this through the Technical Settings for table (Log changes checkbox) and data element characteristics.
3. Made an entry under "CREATE" in SWED for my new change document object, with the z table as the leading table and change document key with structure.
4. Made an entry for my event in SWEC and linked it for a create of the change document.
However, the event is not being fired when a new entry is made in the z table. I set a breakpoint in the funcion module generated for the change document but it's not being detected apparently.
Are there any further settings I need to look at/change for the change document to activate the event? Thanks in advance
Regards,
Juan RamosHi Ramki
Indeed, I consider using SAP_WAPI_CREATE_EVENT much, much simpler, but unfortunately it was another consultant, not me, who built the table, its code, and the code behind the z transaction where the table is used (and he's based offshore). It was only just now that I also found the code he wrote for the txn.
If I would have to add code anyway to make the change document work, I'll just talk to the consultant to have him add the SAP_WAPI_CREATE_EVENT, or I'll just add it myself if I get permission from our development manager.
Thanks for your help as always!
Regards,
Juan Ramos -
Error during create business object with XACML schema
Hi
I can't create a policyset business object with access_control-xacml-2.0-policy-schema-cd-04.xsd schema file in Jdeveloper 11.1.1.3 with bpm11g extension.
it raise bellow error message.
you can find the schema file from bellow link.
http://www.oasis-open.org/committees/download.php/10577/XACML-2.0-CD-ALL.zip
after download the zip file ,you only need the access_control-xacml-2.0-policy-schema-cd-04.xsd file,
start Jdeveloper in debug mode(run jdev in console), import xsd file to bpm project, and create the business object, then
you will got bellow error message.
Does any one know how to solve it?
Thanks.
----------------error message from jdeveloper debug console-------------------------
Exception occurred during event dispatching:
oracle.bpm.project.catalog.type.TypeLoadRuntimeException: BPM-71530: Unexpected error when loading resource '/xsd/access
_control-xacml-2.0-policy-schema-cd-04.xsd'. Cause: The specified resource could not be loaded. Action: Check logs for
more detail
at oracle.bpm.project.catalog.loaders.AbstractTypeLoader.buildTypes(AbstractTypeLoader.java:153)
at oracle.bpm.project.catalog.bundles.ProjectCatalogComponentBundle.buildType(ProjectCatalogComponentBundle.java
:565)
at oracle.bpm.project.catalog.bundles.ProjectCatalogComponentBundle.buildTypeTree(ProjectCatalogComponentBundle.
java:547)
at oracle.bpm.project.catalog.bundles.ProjectCatalogComponentBundle.loadTypeNames(ProjectCatalogComponentBundle.
java:128)
at oracle.bpm.type.TypeCache.reloadFromBundle(TypeCache.java:619)
at oracle.bpm.type.TypeCache.reload(TypeCache.java:116)
at oracle.bpm.type.TypeCache.sync(TypeCache.java:152)
at oracle.bpm.type.DefaultComponentCatalog.sync(DefaultComponentCatalog.java:524)
at oracle.bpm.fusion.soa.soabrowser.SOASchemaBrowserDialogImpl.showDialog(SOASchemaBrowserDialogImpl.java:72)
at oracle.bpm.designer.ObjectContainerDialog.browseSOASchema(ObjectContainerDialog.java:401)
at oracle.bpm.designer.ObjectContainerDialog.access$300(ObjectContainerDialog.java:67)
at oracle.bpm.designer.ObjectContainerDialog$7.actionPerformed(ObjectContainerDialog.java:572)
at oracle.bpm.ui.peer.swing.event.SwingActionListener.actionPerformed(SwingActionListener.java:30)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6267)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6032)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
at java.awt.Dialog$1.run(Dialog.java:1046)
at java.awt.Dialog$3.run(Dialog.java:1098)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1096)
at java.awt.Component.show(Component.java:1563)
at java.awt.Component.setVisible(Component.java:1515)
at java.awt.Window.setVisible(Window.java:842)
at java.awt.Dialog.setVisible(Dialog.java:986)
at oracle.bpm.ui.peer.swing.SwingComponent.setVisible(SwingComponent.java:395)
at oracle.bpm.ui.UiComponent.setVisible(UiComponent.java:838)
at oracle.bpm.ui.OkCancelDialog.setVisible(OkCancelDialog.java:176)
at oracle.bpm.designer.action.NewBpmObjectAction.newFuegoObject(NewBpmObjectAction.java:127)
at oracle.bpm.designer.action.NewBpmObjectAction.doIt(NewBpmObjectAction.java:67)
at oracle.bpm.designer.DesignerAction.run(DesignerAction.java:71)
at oracle.bpm.ui.action.BaseAction.runWithSelection(BaseAction.java:297)
at oracle.bpm.ui.action.BaseAction.runWithSelection(BaseAction.java:290)
at oracle.bpm.fusion.ui.action.IdeMenuAdapter$1.handleEvent(IdeMenuAdapter.java:135)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:884)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
at java.awt.Component.processMouseEvent(Component.java:6267)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6032)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.lang.NullPointerException
at oracle.bpm.project.catalog.parser.xsd.ElementRootDef.buildType(ElementRootDef.java:88)
at oracle.bpm.project.catalog.parser.xsd.SchemaElement.buildSubElements(SchemaElement.java:233)
at oracle.bpm.project.catalog.parser.xsd.Schema.buildType(Schema.java:74)
at oracle.bpm.project.catalog.loaders.impl.XsdTypeLoader.buildTypes(XsdTypeLoader.java:89)
at oracle.bpm.project.catalog.loaders.impl.XsdTypeLoader.loadTypes(XsdTypeLoader.java:77)
at oracle.bpm.project.catalog.loaders.AbstractTypeLoader.buildTypes(AbstractTypeLoader.java:141)
... 83 moreDear,
I think you have created GL as cost element.
Now you have to assign it in OKB9 - Display View "Account assignment" : Overview
In OKB9 specify weather this cost element give impact to cost center or profitability segment.
You have a cost account defined in accounts determination (OBYC). But every cost account must have a cost object associated (internal order, cost center, and so on).
You must decide what is the cost object to 'receive' the cost value on the account.
Go to OKB9, insert the account (can be plant dependant) and the cost object, then repeat GR.
Regards,
R.Brahmankar -
Is it posible to create objects with different names dinamically?
Hi,
I'm creating an app that manages different wireless nodes in a network and I was thinking that I could create a class called Node which would have a constructor that every time I created an object Node, I would pass the address and some other data about the Node and the constructor will save all that data and also create a unique ID for every Node object.
Now the problem is that I need to be able to discover all the nodes in my network every time the user clicks a Ping button. So every time the users clicks Ping I need to do a ping and create as many Node objects as nodes I have in my network. The thing is I don't know how to make it create the node objects with different names so after I've created all the nodes objects I can refer to one of them.
Something like this.
int Id=0;
id++;
Node node+Id = new Node();
I think its not possible to do something like that. If it isn't how can I do to refer to one of the objects I've created?
Thanks.Twistx77 wrote:
Thanks to both of you. I'll check out the Link and if I can't find the solution there I'll make the array , I don't know how I didn't think about doing that. There are two collections you should study specifically:
First you have the ArrayList which in essense is a growable array. This means you don't have to decide in advance how big it can be.
Second there's the HashMap. It's sometimes called an associate array. Such an array doesn't have fixed position indexes like an ordinary array. Instead each index (called key) is associated with a value but the keys don't have any particular order. Still, given a certain key, finding the corresponding value in a HashMap is almost as fast as an array access. -
Hello,
Is there a script that I can change all the colors of a layer in to 1 PMS color, unite every object and than give it an offset of -0,2 mm ?the offset has to be semi-automatic, apply an Offset Path Effect (by hand), create a Graphic Style out of it (by hand), then the script can apply this graphic style to objects.
-
Can't access object using "id" or "name" if created with actionscript
How can you register an instance of an object with actionscript so that it's id or name value is accessible?
I included a simple example where a Button is created using mxml and in the same way it is created using actionscript. The actionscript object is inaccessible using it's "id" and "name" property.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
creationComplete="application1_creationCompleteHandler(event)">
<fx:Script>
<![CDATA[
import mx.events.FlexEvent;
protected function application1_creationCompleteHandler(event:FlexEvent):void
import spark.components.Button;
var asBtn:Button = new Button();
asBtn.label = "actionscript";
asBtn.x = 200;
asBtn.id = "asButton";
asBtn.name = "asButtonName";
addElement(asBtn);
trace("mxmlButton="+this["mxmlButton"].label); // returns: mxml label
//trace("mxmlButton="+this["asButton"].label); // returns runtime error: ReferenceError: Error #1069: Property asButton not found on TestId and there is no default value.
//trace("mxmlButton="+this["asButtonName"].label); // returns runtime error: ReferenceError: Error #1069: Property asButtonName not found on TestId and there is no default value.
]]>
</fx:Script>
<s:Button
id="mxmlButton"
label="mxml label"
alpha="0.8"/>
</s:Application>Hi Dan,
It is a very rare occurrence when I miss not being able to access an object (object property, really) using the ["name"] notation for objects created using actionscript.
In MXML the compiler is conveniently adding an attribute to the class with the same name as the id, so you can conveniently refer to it using the [] notation. While we explicitly specify an application container to use, the MXML compiler creates a custom container which is a derivative of the base container and to that it adds properties for the children declared in MXML. I guess it also effectively calls "addElement" for us when the container is being constructed.
Your example assumes that using "addElement" to add the button to the application container is the same as declaring a variable (ie property ). It isn't, so there's no point in looking for an property of the name "as3Button" using the [] notation, because it doesn't exist. The container is managing a collection of children in it's display list and that's not the same as being accessible as properties of the container.
Generally speaking, accessing properties using the ["name"] syntax isn't necessary.
Paul
[edit: you may wonder why "addElement" doesn't conveniently also add the "id" attribute to be an property of the container class. Unfortunately, it can't because the container class would need to be dynamic and it's not. A further complication would be that adding properties at runtime would invite naming clashes at runtime with associated mayhem. MXML can do this because the compiler generates the class and can trap name duplication at compile time.
Great question, BTW.
-last edit changed my "attributes" to be "properties" in line with Adobe's terminology] -
Create lock object with fun command
Hallo,
Is it possible to create a lock object with the fun command? I tried to use:
FUN ( ENQUEUE _<lockobject> , <interface> ).
When I fill the importing parameters, execute the script and afterwards refresh the interace than the import parameters are empty. Is there a way to create a lock object with the fun command or at least with inline abap?
regards,
WolfgangHi Wolfgang,
in general your way of including the FUN command was correct.
The loss of import parameter values must have been caused by some other reason, not related to the invoke of enqueue. Maybe try it again.
If, for any reason, using FUN is not possible, it's always an alternative to use ABAP. .... ENDABAP. with correct ABAP coding inbetween (e.g. CALL FUNCTION ...).
Nevertheless regarding enqueue you need to consider, that the lock you set by running eCATT test scripts in this way, will last (only) as long as the session in which the function was called is active. Means, it lasts as long as you do not close the SECATT transaction (/n or similar) and not use commands like RESCON in your test script. Check your locks with transaction sm12.
Be aware, that interfering with an applications lock handling and strategy might also harm running transactions or the data processed by this transactions. Usually there is no need to call the enqueue modules from a test.
Best Regards
Jens -
I have LON\JSmith in LON domain and DEL\JimSmith in DEL domain
I would like to extract group memberships of LON\JSmith in LON domain and append matching by email (i.e. DEL\JimSmith) user object in every group in LON domain.
for instance
LON\JSmith and DEL\JimSmith is the same person and has same email address [email protected]
LON\JSmith belongs to 3 groups - LON\localadmingroup;LON\univdesktop;LON\globalsurvey
The outcome of the script should be
LON\JSmith; DEL\JimSmith should be in 3 groups - LON\localadmingroup;LON\univdesktop;LON\globalsurvey.
How can i do it?
NavgupHi Navgup,
Please refer to the script below, to query users in other domain by specifying the parameter "-Server" in the cmdlet "get-aduser", and also note I haven't tested the script below:
import-module activedirectory
get-adgroupmember "group"|foreach{
$email=(get-aduser $_.samaccountname -properties *).EmailAddress#get the user email
Get-ADUser -filter {EmailAddress -eq $email} -properties * -server DomainB.company.com|select samaccountname, memberof}#filter user name and group with the email in other domain
To get users across domain, please also refer this blog:
Adding/removing members from another forest or domain to groups in Active Directory:
http://blogs.msdn.com/b/adpowershell/archive/2010/01/20/adding-removing-members-from-another-forest-or-domain-to-groups-in-active-directory.aspx?Redirected=true
I hope this helps. -
Is it possible to create 2 Date objects with different hashcode.
Hi,
I want to create 2 java.util.Date objects with different hashcodes. Is it possible??
Regards,
Farooqimport java.util.Date;
import java.util.Calendar;
public class TwoDates {
public static void main(String[] args) {
Calendar oneCal = Calendar.getInstance();
oneCal.set(Calendar.YEAR, 1903);
Calendar anotherCal = Calendar.getInstance();
Date oneDate = oneCal.getTime();
Date anotherDate = anotherCal.getTime();
System.out.println(oneDate.hashCode() + " " +
anotherDate.hashCode());
-14330615 -825112150 -
Error when create XMLType object with JDBC connection
Hello, I try to get an XMLType object with JDBC, but it doesn't work. Can somebody help me?
My code is :
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@"+"a02w03:1521:PROJET", "scott", "tiger");
OraclePreparedStatement stmt = (OraclePreparedStatement) conn.prepareStatement("select xmldoc from cv_col");
ResultSet rset = stmt.executeQuery();
OracleResultSet orset = (OracleResultSet) rset;
while(orset.next())
OPAQUE o = orset.getOPAQUE(1);
System.out.println(o.getSQLTypeName());
XMLType poxml = XMLType.createXML(o);
My database table:
CREATE TABLE cv_col (
XMLDoc xmltype
Execution: The SQL type name "SYS.XMLTYPE" is write and then I obtain the error:
Exception in thread main
java.lang.NoSuchMethodError: java.lang.String oracle.jdbc.internal.OracleConnection.getProtocolType()
at oracle.xdb.XMLType.initConn(XMLType.java:2072)
at oracle.xdb.XMLType.<init>(XMLType.java:903)
at oracle.xdb.XMLType.createXML(XMLType.java:493)
at Prog.main(Prog.java:26)
Process exited with exit code 1.
Thank you, very much!What platform are you using for the database, what are you running your code on.
Which database version are you working with.. What is your class path. What version of JDBC and OCI are in the client environment, eg what are CLASSPATH and PATH / LD_LIBRARY_PATH settings. Have you tested your code using a simple IDE like Oracle's JDeveloper or run it from directly from the command line. -
how do I import an illustrator file with a spot color into photoshop as a smart object without it being converted to four color
Try thread http://forums.adobe.com/thread/1121348?tstart=0
-
With PS 7
create new
Place two objects on the new file
then you may cut copy and paste
Cs2
create new
place two object on the new file
Cut is not available how does one cut and paste in new fileIf your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are. -
Error creating Objects with Reflection
This is the code:
try{
System.out.println("Restart - test 1 - sub == " + sub);
c = Class.forName(sub);
con = c.getDeclaredConstructor();
catch(NoSuchMethodException e){
System.out.println("Unknown event type\t" + e);
}Output:
Restart - test 1 - sub == Mouse
Unknown event type java.lang.NoSuchMethodException: Mouse.<init>()I have a Mouse class with a declared Constructor. Why can't it find the Constructor?SquareBox wrote:
almightywiz wrote:
Your code is trying to find the default constructor for your Mouse class. If you don't have a default constructor specified, it will throw the exception you encountered. What does your constructor signature look like?
public Mouse(int weight){
this.weight = weight;
}How do I get the Constructor if it contains parameters?This is answered in your other thread: Creating objects with relfections And you even marked it correct!
Please don't post the same question multiple times. It leads to people wasting their time duplicating each others' answers, and makes for a fractured discussion.
Edited by: jverd on Apr 26, 2011 3:59 PM -
Webi Reports - Object with id ... cannot be created because it has no name
I'm trying to launch a Webi report from our application using openDocument method. When the report is launched it fails with following error -
30567: Unable to save the document to the repository due to the following error: The object with id number '27731' cannot be created because it has no name. (Error: WIS 30567)
Before scheduling the report I'm calling setName method to set the name of the report but still it does not work. Any help would be greatly appreciated.
Thanks
ManasHi John,
I will try to give you some more background about this problem.
From our application we are not directly launching the report. We schedule it to run immediately and then view the instance created (using the instance id returned by the schedule call).
For scheduling we use the web services API (BIPlatform) and before scheduling we fetch all the prompts (again using a webservice API). The call is something like this -
WebiProcessingInfo wProcessingInfo = boWebIReport_.getWebiProcessingInfo();
After that we populate all the prompts with their corresponding values in application and schedule it. However the scheduling fails with the error I mentioned in the start of this thread and when we try to view it we are presented with a screen to enter prompts again.
From the scheduling error it looks like its failing because the name could not be set but I really doubt if thats the case. We use same calls to schedule and view Crystal reports also and they work perfectly. Only Webi is giving this error.
Thanks for looking into this.
Manas
Edited by: Manas Mandlekar on Sep 10, 2008 7:14 AM
Maybe you are looking for
-
SPED Contábil / Fiscal e NF-e. Quais pontos a SAP atenderá?
Senhores, Eu tenho uma lista do que mais ou menos seremos obrigados a ver no futuro, diante das obrigações que o governo está solicitando. Gostaria de saber sobre quais pontos abaixo a SAP tem planos de atender: 1. Relacionados ao SPED Contábil: 1.
-
How to Print a PDF file from within a ABAP ( from gui input)
Hi champions, This is Client requirement: "We need to print a PDF file from within a ABAP" We first need to test whether it is even feasible, and then if it is, then write a small test ABAP which can accept a PDF file name as input (from GUI) and th
-
Remote Desktop Connection from a Windows 8.1 laptop to a work PC using Windows 7
Hi! I posted this question in the MS Community forums and they redirected me here... I searched the forums here but didn't find anything that helped with my problem. So here is my original question (posted originally here: http://answers.microsoft.co
-
Defining New G/L Accounts for Each Warehouse
Dear All......... We have managed inventory by warehouse and set the G/L accounts by warehouse wise. Now if we create new warehouses the system but by default the accounts are same for all the warehouse, So my main Question is ......
-
FaceTime worked fine for a year and just quick working??
I had no problems with the Face Time usage on my MACPRO ...then a couple of months ago it just quit working? Says it is off - I click on and preferences and the eternal circle goes non stop? Anyone else have issues with Face Time?