Every single day.

I'm using a BEFW111s4 wireless router, and every single day at right around 4 PM, my wireless connection just stops working. It will work again if I reset my router, but it will go off again within 10 minutes. This entire cycle will repeat itself until around 7PM. Why does this happen?
It's not related to the other two people in the house using the router, because it will even do it when I am the only person online. I've tried multiple "fixes" but nothing works. Any ideas?

I think you can try to reset and reconfigure the wireless router .
Press and hold the reset button for 30 seconds .
Release the reset button and power cycle the router and modem .
Connect a computer with the Ethernet cable to the Ethernet port on the router .
Open the setup page of your router .
Configure the wireless settings on your router .
Give a new wireless network name and Save the settings ,
Connect your wireless computer with the new wireless network name .
Check if the connection still dropping .

Similar Messages

Dots (events) for every single day in calendar (NEW issue)

Ever since I upgraded to FW 2.0 I have had "dots" appear in every single day of the calendar (symbolizing events) even though I have no events for those days.
Now - I KNOW about the issue with the recurring/repeating events as well as events that "begin" after they "end." That said, I have checked EVERY single event I have in the phone and in the calendar in Outlook and NONE of the events are repeating/recurring and all of them are set up properly with correct start/end times.
From my searching, the above seems to be what's commonly known to cause this problem. Those don't fit MY problem.
The odd thing here is, if I go backward in the month view on the calendar on the phone to February, there are no dots. There are also no events. However, if I go to March on the month view in the calendar, every single day has dots (and continues). The really weird thing here is if you look at the calendar in the month view while it's on March, you can see the last week of February at the top. And in that last week, while in the "March" view, the last week of February ALL has dots. But again, if you move back to "February," all those dots that were there disappear.
So...I'm at a loss now. I've wiped the events off the phone. Edited/pruned/etc. events in the Outlook calendar, and then re-synced with the order to overwrite that which is on the phone. Still no luck. Is this a glitch that needs to be corrected with new FW? Would a restore help? I just don't really know anymore..
Thanks,
John

I am having the same issue. However, I am syncing my calendar to my work computer and the issue presented itself when I upgraded to Office 2007 from 2003. I have since removed Office '07 and did a restore to my iphone which cleared the issue. Then did a sync again to Office 2003 and the issue re-appeared. Not sure if '07 added something to my calendar that is hidden but it is very frustrating.

Gets so slow that I have to pull the battery every single day!

I have had this issue from day 1 and is driving me crazy. Have to pull out the battery every single day just to be able to free the memory and so that it can run at a descent speed.
After taking out the battery, putting it back again and then switching the phone back on I will have a look in the application storage memory which will start at about 120mb. Over the next few minutes or hours the storage memory will get less and less till is sit with about 0 - 20 mb of storage memory. The device will then stop responding then eventually just hanging until I pull the battery then need to follow the process all over again.
I have up[dated the firmware and restored the phone back to defaults several times with no luck.
I do not install software on this phone. The only apps I install is watchstrap, twitter and Thelma navigator.
I have a 2gig memory card in the phone a swell.
I got to stop myself from throwing this piece of junk against the wall. Cannot wait for my contract to end so I can go for Samsung or android!! Unfortunately I got to wait still over a year. SO FRUSTRATING!!!

Hi and thank you for the advice.
I have installed the Blackberry Virtual Expert but does not have an option to see whats eating my memory. The only optioins it gives me is to do Display tests, Keypad tests, Audio tests and choose test, So i don;t think this software is going help me A few minutes my Application storage was sitting on 0.00MB and slowing dow and thinking now my memory has gone back up to 16.3MB then back up to 33.7MB. Its my lucky day but will have to do a battery pull probably laer again. Just to confirm all the software installed is..
Telmap navigtor
Screen Grabber
Whatsup app
Facebook app
Twitter
Blackberry Virtual Expert.
I think what i have to maybe do is to do another factory reset on the phone and install nothing on it. Monitor for a few days and then install one application. Monitor for a few days and so on. It's all i can think of. Thank you for the help anyways

How can I block a number that calls me persistently every single day but only shows 3458 it does not show the full 10 digit

how can I block a number that calls me persistently every single day but only shows 3458 it does not show the full 10 digit so on your block page will not let me block it!!! So frustrated and I am not answering it with all the hackers out these days I don't want to give them access to my phone.

@lottsandy
I can understand your frustrations and concerns with receiving these unknown calls! I would love to assist you with preventing these types of calls.
Sounds as though you're receiving some type of telemarketing call. Although you're unable to add the shorter numbers to your call block list, you can definitely add your number to the National Do Not Call registry http://1.usa.gov/1whONxp. I hope this will help prevent those unwanted calls. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

4.7GB Backup every single day?

What's up with a daily 4.7GB backup? I check some email, hack some PHP code, and that's about it. 4.7GB seems like serious overkill every single day.

Michael Lunsford wrote:
It was the Microsoft (surprise) entourage main identity. Apparently, I have managed to store almost 5GB of email over the last two years. I wish I could get rid of it but still keep it just incase.
There are several possibilities.
You could move it to your TM drive, preferably in a separate partition.
You could exclude it from TM.
You could exclude it from TM but periodically copy it to a file that isn't excluded and would be backed-up. You could even automate this, with an AppleScript or Automator function, scheduled to run daily, or weekly, or whenever is appropriate.

Getting Z68A-GD80 (G3) to wake up every single day...

all,
is there a way to get my PC to boot every single day? I used to be able to do it with a gigabyte mobo, but I don't see the option in my Z68A-GD80 (G3) bios menu (there is RTC alarm, but that seems to be restricted to once a month).
so, is it possible?
if not, how can i configure a wake-up event via win7 x64 (as "OS" seems to be an option in the bios for wake-up events?)
any help much appreciated.

In the UEFI/BIOS, be sure to disable EuP 2013 (C1E might be the other one to disable along with it).
Added: Also disable Spread Spectrum.

Why Must I License and Activate Every Single Day?

Every day I'm told I'm at 24 days left on a trial, or -1 days left and asked to sign in and license.
Which I do.
Same thing happens next day.

I've seen the products reverting to trial with incorrect number of days remaining happen before but launching the Adobe Application Manager should now update to latest version and correct the issue. See this document and the Additional details section.
http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
You should be able to just launch the Adobe Application Manager via the Start Menu (Windows) or alias in the Applications folder (Mac)
-Dave

OS X crashes EVERY.SINGLE.DAY. - Advice needed please

Hi all,
Unfortunately search is disabled, so my apologies if this has been asked 100 times before.
Hopefully somebody can help me out.
I have a MBP running 10.5.4 that is less than 2 months old.
Everything is great about it, except for the very annoying fact that it crashes every day.
The grey curtain comes down and I manually have to restart.
It happens totally randomly, nothing in particular seems to trigger it.
I've verified the disc and permissions in disc utility and it says there are no problems.
Here are the last 3 panic logs (there's nothing in my crashreporter, only panicreporter), maybe someone can see the problem?
Tue Jul 15 22:12:21 2008
panic(cpu 1 caller 0x001431A9): "zalloc: \"kalloc.8192\" (38 elements) retry fail 3"@/SourceCache/xnu/xnu-1228.5.20/osfmk/kern/zalloc.c:770
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x40563c88 : 0x12b0fa (0x4592a4 0x40563cbc 0x133243 0x0)
0x40563cd8 : 0x1431a9 (0x45aef0 0x459b38 0x26 0x3)
0x40563d38 : 0x12fa53 (0x1ec92d8 0x1 0x6c 0x1a236f)
0x40563d68 : 0x12fa72 (0x1690 0x1 0xb0000000 0x0)
0x40563d88 : 0x11d99f (0x1690 0x0 0x1b635 0x0)
0x40563db8 : 0x12d0f6 (0x10f0 0x0 0x0 0x0)
0x40563df8 : 0x126257 (0xac35400 0x0 0x6c 0x40563ee4)
0x40563f08 : 0x1973dd (0x40563f44 0x0 0x0 0x0)
0x40563fc8 : 0x19f3b3 (0x47de720 0x0 0x1a20b5 0x4d26ba0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb007e848
BSD process name corresponding to current thread: hidd
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: MacBookPro4,1 (Mac-F42C89C8)
Mon Jul 14 23:10:55 2008
panic(cpu 1 caller 0x001431A9): "zalloc: \"kalloc.8192\" (36 elements) retry fail 3"@/SourceCache/xnu/xnu-1228.5.20/osfmk/kern/zalloc.c:770
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x34816968 : 0x12b0fa (0x4592a4 0x3481699c 0x133243 0x0)
0x348169b8 : 0x1431a9 (0x45aef0 0x459b38 0x24 0x3)
0x34816a18 : 0x12fa53 (0x1ec02d8 0x1 0x34816a58 0x0)
0x34816a48 : 0x12fa72 (0x1800 0x1 0x24 0x18)
0x34816a68 : 0x404042 (0x1800 0x212 0x34816ac8 0x1057e34)
0x34816a88 : 0x10580b6 (0x1800 0x0 0x0 0x0)
0x34816ac8 : 0x10590d6 (0x24322000 0x34816d9c 0x34816da0 0x34816da4)
0x34816b38 : 0x43ccdc (0x24322000 0xe141c74 0x34816d9c 0x28)
0x34816b78 : 0x43d88f (0x10b84a8 0x24322000 0xe141c74 0x28)
0x34816bd8 : 0x43b438 (0x24322000 0xf 0x34816c20 0x0)
0x34816cf8 : 0x18d918 (0x24322000 0xf 0xe141c70 0x0)
0x34817db8 : 0x12d17e (0xe141c48 0x234dd5a0 0x0 0x0)
0x34817df8 : 0x126257 (0xe141c00 0x0 0x7c 0x34817ee4)
0x34817f08 : 0x1973dd (0x34817f44 0x0 0x0 0x0)
0x34817fc8 : 0x19f3b3 (0x4d3d180 0x1 0x1a20b5 0x4a6b4f0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffdba8
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.2.8)@0x103a000->0x10c8fff
dependency: com.apple.NVDAResman(5.2.8)@0xc06000
dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0xbf8000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5c1000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0xbdc000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: MacBookPro4,1 (Mac-F42C89C8)
Sun Jul 13 10:19:05 2008
panic(cpu 0 caller 0x001431A9): "zalloc: \"kalloc.8192\" (33 elements) retry fail 3"@/SourceCache/xnu/xnu-1228.5.20/osfmk/kern/zalloc.c:770
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x34c4a968 : 0x12b0fa (0x4592a4 0x34c4a99c 0x133243 0x0)
0x34c4a9b8 : 0x1431a9 (0x45aef0 0x459b38 0x21 0x3)
0x34c4aa18 : 0x12fa53 (0x1eda2d8 0x1 0x34c4aa58 0x0)
0x34c4aa48 : 0x12fa72 (0x1800 0x1 0x2000002c 0x18)
0x34c4aa68 : 0x404042 (0x1800 0x212 0x34c4aac8 0x1070e34)
0x34c4aa88 : 0x10710b6 (0x1800 0x0 0x0 0x0)
0x34c4aac8 : 0x10720d6 (0x24356000 0x34c4ad9c 0x34c4ada0 0x34c4ada4)
0x34c4ab38 : 0x43ccdc (0x24356000 0x4327b74 0x34c4ad9c 0x28)
0x34c4ab78 : 0x43d88f (0x10d14a8 0x24356000 0x4327b74 0x28)
0x34c4abd8 : 0x43b438 (0x24356000 0xf 0x34c4ac20 0x0)
0x34c4acf8 : 0x18d918 (0x24356000 0xf 0x4327b70 0x0)
0x34c4bdb8 : 0x12d17e (0x4327b48 0xe88e5a0 0x0 0x0)
0x34c4bdf8 : 0x126257 (0x4327b00 0x0 0x7c 0x34c4bee4)
0x34c4bf08 : 0x1973dd (0x34c4bf44 0x0 0x0 0x0)
0x34c4bfc8 : 0x19f3b3 (0x4808940 0x0 0x1a20b5 0x4808940)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfff5d08
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.2.8)@0x1053000->0x10e1fff
dependency: com.apple.NVDAResman(5.2.8)@0xc1f000
dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0xc11000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5cd000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0xbf5000
BSD process name corresponding to current thread: ScreenSaverEngin
Mac OS version:
9E17
Kernel version:
Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
System model name: MacBookPro4,1 (Mac-F42C89C8)
Thanks in advance!

The last few lines of the kernel panic report seems to be pointing at NVIDIA though.. I'd assume it's something to do with the graphics subsystem.
-quote-
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.2.8)@0x103a000->0x10c8fff
dependency: com.apple.NVDAResman(5.2.8)@0xc06000
dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0xbf8000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5c1000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0xbdc000

HT3728 since Oct 25 my time capsule is not working properly. I enter the time machine to check my backups and the only thing I see is balck screen on every single day since I put it to work on my house. Any ideas on what's going on?

I am having problems with my time capsule.
It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
Was not like this before Oct 25...
Any ideas on what's going on and what should I do to make it work again?

Check the USB cable first to make sure that it is operating correctly on another connection.
You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
You may need to use the powered hub even if the hard drive has its own external power supply.

Why does Firefox 21 close first session every single day?

My girlfriend has a new Vaio laptop running Windows 8 and Firefox 21.
Every time she starts Firefox for the first time (after powering up the laptop), the browser closes immediately upon her selecting a bookmark from the bookmark toolbar (usually Gmail) or whatever the first task is that she asks Firefox to do for her. (i.e., search or open a URL.)
I've already reset Firefox and confirmed that hardware acceleration is NOT enabled. (We've replicated the problem after completing these steps.)
The last four crash reports are below.
http://crash-stats.mozilla.com/report/index/bp-1030722a-36af-425a-a6dc-9b7de2130607
http://crash-stats.mozilla.com/report/index/bp-ddaa2289-9a7f-40b7-9e05-57f272130605
http://crash-stats.mozilla.com/report/index/bp-b06fe87b-748a-42dd-912f-cc5d32130605
http://crash-stats.mozilla.com/report/index/bp-ee8ecce2-8878-4166-8135-362b92130531
Needless to say, this ongoing problem is very frustrating. Any suggestions on how we can make her browser work more reliably would be greatly appreciated.
Thank you!

hello, i think the crash might be triggered by Whitesky's ID Vault which is installed on the notebook...
https://bugzilla.mozilla.org/show_bug.cgi?id=879354

TS1398 I have to enter my wifi password every single day , why is this ?

Why

Try the following:
Rather than touching your network name to connect touch Other... instead
Enter your network name and security type
Enter your password
See if your network is remembered.

1/3 of my addons don't work/places.sqlite corrupts every single day

You've got to stop throwing these updates out like cat vomit.
PLEASE notify the addon makers so that they have time to update the addon for the latest version.
One-third of my addons don't work with 5.0. Why can't you put a addon check BEFORE the installation so that one can decide whether the upgrade is worth it.
My screen reader doesn't work. They just updated the software less than a month ago. Is this rapid cat-vomit pace of software updates really necessary??
There are some addons that are absolutely necessary. I cannot use Firefox without a screen reader. Why you don't have one as part of the software installation 20+ plus years after ADA is beyond me.
Now, I'm going to have to spend the afternoon uninstalling this piece of useless crap and reinstalling 4.0.1.
Firefox is seriously beginning to not be worth the effort. It's a resource pig. You have to modify it (addon) to get it to work reasonably. Not really worth the effort.
I've had a problem with the history going into the wrong date bucket for at least a month (probably longer) ... see https://support.mozilla.com/en-US/questions/821193. No response to my post. I'm not the only one with the problem.
Why keep updating buggy software and not fixing any of the problems that people are having??

95% of the most popular add-ons hosted at AMO are 5.0 compatible (or beyond 5.0). <br />
https://addons.mozilla.org/en-US/firefox/compatibility/report
If you repeatedly have problems with your select add-ons not being updated in time for the release of a new version of Firefox, why do you install the upgrade as soon as it comes out? Wouldn't it make more sense to give the developers of the extensions that you use a little bit of time to update their stuff before agreeing to install the Firefox upgrade?
IMO, you need to take the time for a reality check, before setting yourself up for disappointment time after time.

IPhone 5s "searching" every single morning

A little background:
*I was an Altell customer that was grandfathered in to AT&T (When they bought Altell) with unlimited data and my service started on a brand-new AT&T iPhone 5s on February 3rd, 2015.
*Several weeks after the phone was activated, I dropped it and busted the screen. I contacted the insurance company and they sent me a phone at the cost of $200. That particular phone had an issue where the person I was talking to could barely hear or understand me. I contacted the insurance company and they sent me another replacement.
*That phone had an issue with the GPS not working correctly on any app that required it. On April 10th, I went to the Apple Store at and the very helpful Genius Bar technician gave me a replacement on the spot.
*In July, I woke up on a Friday morning and my phone was "searching" in the upper left corner. I contacted AT&T and it was not an issue on their end, but I was advised to go to the local store to get a new SIM card.
*That became an issue that required hours of phone time with AT&T's computer system not allowing them to update my SIM card because of some issue with an embedded plan feature that carried over from Altell and they had no idea how to fix it. They eventually got it taken care of, but my phone continued to give me trouble by continually "searching".
*It was at that time that I went to the Apple store to get help. I saw the same technician as in April and he informed me that my phone was out of warranty. I am not certain how that happened because my original 5S from AT&T was only activated by them on February 3rd. He said it seemed to have a hardware problem. He did, however, order me a replacement which came in the following week.
*When I went to pick up that phone the technician had a little trouble getting it to activate, but eventually did and sent me on my way. That phone continues to have the same issue as I originally had with the "searching".
Currently:
*I wake up every single day with my phone "searching". Once I go to the area of my house where it can detect our wifi, it either (1) finds signal (2) Asks me for my apple ID to activate (3) or I have to turn it off using both buttons and then turn it back on. (sometimes, I have to do all of the above)
*It had not been happening during the day, but today it has done it several times throughout the day
Things I have done to try and solve the problem:
*Replace the SIM card
*Complete restore without adding a backup
*Complete restore with a backup
*Update Network settings
I have done all of the above several times and continue to have the same problem. I also did the restore on two different computers. I am baffled as to what to do. I feel like I have done everything I could to just have a dependable phone and in February I had a brand new phone from AT&T. I even got desperate and wanted to buy a new phone outright only to find out I am looking at $500+ for a 5S unless I do a contract through AT&T. That would cause me to lose my unlimited data that I was grandfathered in with. I have felt somewhat bullied by AT&T and I feel stuck with what is a faulty phone that was suppose to be a "fix" for my troubles.

Hello @Jamielous69
I’m sorry to hear you’re having signal issues; I’d be glad to help you out!
In order to further assist you, could you please send me a private message providing your:
Full name
Wireless number
Best time to reach you, and alternate contact number if available
We will reach out to you within 2 business days
Thank you,
Charise

Anyone know how to resolve iPhone 4 dropped calls as I have a case on and it's still losing every single call I make at least twice and I'm sick to the back teeth of it?

Hi all I recently rang my service provider to complain about my
iPhone 4. Iv done this several times but they always fob me off. This time I kicked off and they told me I would have to speak to apple. I did and they told me there was nothing they could do as my phone was out of warranty.
Its really frustrated me cause it's a widely publicised issue that apple dropped a complete bollock allowing such a major flaw ever get released and then they have the cheek to use the warranty as a reason. This issue should not have anything to do with warranty as it's a fault
With every single iPhone 4 out there. There should have been a recall and the issue resolved. Im disgusted apple and I won't be buying anything from any of your products again.
Does anyone know how I can resolve this as apple want to charge me to repair even though it's there fault this issue exists?
Thanks

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

How to "select" sth which takes place every n days?

Hi there,
I'm developing a JSP/Servlet-based event calendar for young people in a big German city. I recently ran into a problem while implementing a new feature requested by the team which is maintaining the website. Editors can enter events over a web-based form; currently supported are events which take place on a single day or spawn over multiple days.
I've been asked to provide means of entering something like events which take place every n days, starting at a given date.
I thought about storing the start date and an integer which holds the number of days after that the event should take place again. This would be very easy to implement on the frontend: A textfield/dropdowns for the date and a textfield/dropdown for the "repeat every n days" thing.
But I can't think of any reasonably fast way to get those events from the database when my servlet should display all events between, let's say, December 1 and December 24.
The only thing which came to my mind was selecting every event's start date, taking the "repeat every n days" field an check if the current date is one of those "repeat days" by repeatedly adding the "repeat every n days" value. But this would seriously affect the servlet's performance. Let me explain the above idea with some pseudo code:
ResultSet rs = stmt.executeQuery("SELECT * FROM events ...");
while (rs.next())
Date startDate = rs.getDate(...);
// don't care about the single-day and multiple-day events here
int repeatEveryNDays = rs.getInt(...);
while (startDate <= currentDate)
if (startDate.equals(currentDate))
// show event on search results page
else
// increase date by "repeatEveryNDays"
startDate.day += repeatEveryNDays
}As I knew this forum very well, let me emphasize that this is not some kind of homework assignment. If you want prove, go to http://www.under18.de and look at the site. But I doubt that will keep the trolls away from this topic :(
Thanks for your ideas,
Philipp
PS: For those not so capable of understanding what some call German g, here's a Googled translation into English (ahem... ignore the text, it's colloquial German and Google doesn't seem to like it): http://translate.google.com/translate?u=http%3A%2F%2Fwww.under18.de&langpair=de%7Cen&hl=en&ie=UTF-8&oe=UTF-8&safe=off&prev=%2Flanguage_tools

I just thought about this one: Assume I have an event
starting on Nov 2 taking place every 7 days. Now I'd
search for events between Nov 3 and Nov 11. The
difference of start date - STARTDATE would be
1, divided by 7 would be 1/7 (about 0.142857).
Adding 1 to 0.142857 would be rounded to 1 (using
integers), resulting in Nov 4 if I'm right. Well, Nov
4 falls between start date and end date
but there actually is no event on Nov 4 according to
the 7-day period defined above. I don't get any
further with your "calculate the next event based on
that number plus one".Taking your example, the difference between start date and STARTDATE is 1 day, which means that the first event is after start date. Now the first occurrence that is after start date is (0+1)*7+STARTDATE, which is (Nov 2 + 7).
All you have to do with this number is to make sure it isn't after the ENDDATE value (to verify it is in your repeating schedule), and doesn't fall after the end date that you are comparing for.
Some math major can probably explain the calculation better than I have, but the basic idea is figure out what the first occurrence is that is after your start date and then make sure it's not greater than end date.

Every single day.

Similar Messages

Maybe you are looking for