Every thing is two times in component monitoring

hi,
I am trying to acces the component monitoring in  RWB and there evry thing is coming two times.Please help
Solved it thanks
In RZ21 there were two system groups maintained for the same system
Edited by: Fariha Ali on Feb 10, 2010 2:20 PM

Because you did not change what str1 refers to...
You told str1 to point to what str2 was pointing to at the time.
str2 was a reference to "efgh". So, in effect, you told str1 to point to "efgh", too.
Then you told str2 to refer to something else. str1 has nothing to do with what you told str2 to refer to.
You told str1 to refer to whatever str2 was referring to at at that specific point in time. After that, str2 is on its own. They are separate references and are not implicitly connected to each other.

Similar Messages

  • Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Using the Mac with your iPad has nothing to do with the fact that the iPad is running slow. There could be any number of reasons why the iPad is now running slow.
    Have you tried a reset on the iPad?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other ap

    I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other apps but photoshop no. Any ideas?

    I don't think I can access the crash report? Excuse the ignorant questions I'm about to make am a relative tech novice.
    Soo - as mentioned every time I open photoshop it crashes - it just says there's an error and the program will shut down and if there's a solution windows will notify me. Then nothing...
    I've tried to look in photoshop files for the detailed crash report & the system event viewer but cannot find a file with those names. I've also looked in the windows files for files with those names but cannot find them either - so I don't know where to look.
    Any guidance would be great.

  • Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the  brightness is to low and i can see any thing

    Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the  brightness is to low and i can see any thing!! and i want to know why is happen

    Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
    Regards.

  • My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

    A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

  • Signing in to iTunes. I am asked to sign in two times in a row, every time. Is this the new normal? Can this be changed somewhere in preferences? Thank you.

    Why am I asked to sign in to the iTunes store every time I open the iTunes app? I have not signed out and I am forced to sign in two times, every time. Why is once not enough? Is there something wrong with my computer or my iTunes app? I live alone and I am the only person that uses this computer. Which is, by the way, a 2011 MacBook Pro 13". Any comments or advice are appreciated. Thank you.

    AndrewG33 wrote:
    I am new to iMac and thinking about subscribing to itunes match. Is it worthwhile and if I want to still store music on the iMac in iTunes am I able to still do this even if I do not renew the subscription in a years time. Thank you for your help.
    See this page from the Apple web site for more information: http://www.apple.com/itunes/itunes-match/
    AndrewG33 wrote:
    Oh and also, I have set up 4 user log ins one for each member of the family will the same itunes library be used by each person in their own log in or will they have to have their own match subscriptions?
    A computer can be associated to only one Apple ID at a time. Multiple Users on the same computer cannot use iTunes Match, automatic downloads, or re-download content from the iTunes Store at the same time: http://support.apple.com/kb/HT4627.

  • Not able to acess app store .. Tried every thing with ... Dns change .. Time chage.... Reset... Location services .suggest me how to resolve this issue

    Not able to acess app store .. Tried every thing with ... Dns change .. Time chage.... Reset... Location services .suggest me how to resolve this issue

    Hi aditya123,
    If you are having difficulty connecting to the App store from your iPhone, you may want to try the steps in this article -
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Specifically -
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
    Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
    Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    It looks like you have already done many of these, but there are a few more to check out.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • HT5787 when first time i purchase Iphone, i don't know about Authentication mail and apple ID, every thing was done by sales person, now when i update by Iphone

    Dear All, when i first time purchased Iphone i dont know about the Apple ID and security system, every thing was done by sales person, now after using for 17 months when i updated my Ipnone it asked for authentication mail ID and password, nothing worked out and my phone is blocked, i request the Authorities to help me on this issue, Pnone serial no. is like this
    A1431 CMIIT ID:2011C16093.
    thanks

    Dear Rojmer,
    thanks for understanding by problem, since I have purchased Ipnone in an Apple store at Shanghai china, and I am residing in KSA & cannot contact them, now that is the way-out for such problem, I don't agree or believe that Apple as a great company will let their product and my information in the Iphone go excess.
    Hope to get some solution

  • Outlook webmail times out every minute or two

    Hi, we use Outlook at work and use webmail for Outlook Express at home. After signing in at home, I am timed out every minute or two, and I have to copy and paste every email because it won't send when I click send, it just sends me back to the login. I am clicking the option for "private computer" and am definitely not inactive at any point before being logged out.  Any suggestions?!

    Jon,
    1. Since your computer "crashed" updating software use Disk Utility as specified in the Try Disk Utility paragraph of Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD. When you get a clean bill of health, restart from your Hard Drive and run "Repair Disk Permissions" from the Disk Utility application which is in your Utility Folder.
    2. If those procedures do not solve your problem, find the com.apple.finder.plist file in your ~Library/Preferences Folder, drag it to the Desktop and then log out/in or restart.
    3. If that is unsuccessful reapply the Mac OS X Update 10.4.5 Combo.
    Let us know what happens.
    ;~)

  • While syncing last time the computer turned off during the process and now when I try to get ont oitunes the phone is read only as a camera device and I cant  sync my phone.  I have tried re installing itunes and have turned every thing off and on. Help!!

    While syncing my Iphone the computer turned off and now Itunes doesnt read the connection. A message appears that I have plugged in my camera on my pc.I have gone through turning every thing off and on and re installing Itunes but still no luck. Any suggestions?

    If iTunes cannot see your iPhone.
    First, try soft-resetting your iPhone.  Press and hold sleep/wake and home button, ignore the slide bar - keep pressing.
    When you see the Apple logon, let go.  When the phone has restarted, plug into PC. Will iTunes see iPhone now?
    If not, you'll have to do a DFU restore - please note that this will wipe everything on your iPhone. If you have a recent backup (iTunes does this by default), then you're in luck and you can restore everything back.
    If not, then...hmm well... Oh bum.  Maybe you have an iCloud backup? I haven't tried this so I can't comment.
    Click HERE for DFU instructions

  • ITunes 8.1 Can't Seem to do More Than One Thing at a Time

    I upgraded to 8.1 and now, rather than a "faster" iTunes experience as was advertised on Apple's website, iTunes can't seem to do more than one thing at a time without locking up the application completely. For instance, when trying to download podcasts if I choose to hit more than one "Get" button at a time iTunes will freeze up until the first podcast has completely downloaded. During this time I cannot access any other screen in iTunes at all.
    This freezing of iTunes also occurred while I was trying to sync my iPhone 3G. I received the Calendar sync error that a few other people have mentioned on the forum and wanted to turn off Calendar sync (since I don't use it and don't understand why iTunes turned it on by default, apparently, after the upgrade) but I had to wait for my iPhone 3G to completely sync before I could gain access to any of the tabs in the iPhone sync window.
    So, basically it seems like the new version of iTunes (8.1) really doesn't like to be bothered while it is trying to copy data from one place to another.
    Any ideas?

    I'm using Vista Ultimate 64-bit and iTunes 8.1 installed OK, but required a restart of the entire OS after upgrading. It takes forever to launch, clicking on certain items (like applications) causes itunes to freeze for about 15-30 seconds before it continues (this is actually something that's been there since the introduction of the app store), I've had to switch my library view to LIST and avoid any sort of album art. Using album art to view my library causes iTunes to be extremely, obnoxiously unresponsive.
    The best part - plugging in my iPhone to sync it... iTunes simply sits there dumbly - doesn't even recognize that I've plugged my iPhone in. So now I can't even sync. QUALITY product, quality. So the app I'm FORCED to use to manage my phone doesn't even work after upgrading. Outstanding.
    I'm terrified of uninstalling and reinstalling... the last time I did that with iTunes it jacked my library up... it "lost" all of my music... basically it disassociated all of the music (even the stuff purchased through the itunes store) with the index file so I had to re-import EVERY song and delete the duplicate entry.
    I searched a ton of forums looking for any clues as to how I could improve performance... All I run into is apple fan boys flaming any and all forums to the point of PC *****, no Apple *****, and so forth. Extremely unhelpful.
    The fact is this - if I wasn't forced to use iTunes to manage my non-jailbroken iPhone 3G, then I'd dump it completely. It is a horrible app. Why punish the customers that haven't gone the route of "jail breaking" their iPhones?
    One individual on one of the forums suggested that blue screens, and all the other random errors, including slow performance were due to a lack of RAM. I have 4GB of RAM on my machine I can run a virtual Fedora core 9 machine and a virtual WinXP machine on my Vista x64 box and still not have any performance issues with those two virtuals in the background sucking up system resources, yet with nothing open and less than 50% of my 4GB of RAM in use iTunes performance is abysmal. I have not run into any other application on my Vista machine that performs as badly as iTunes.
    And Apple is touting a "64-bit" version of iTunes - it isn't. The applications the 64-bit installer installs are all 32-bit.
    So, I'm searching as the two of you are for an answer to horrible performance of iTunes.
    Even exiting out of iTunes takes a day and a half... "saving itunes library".... And my "library" isn't that big.

  • SAP Script need to display main window two times on single page.

    Hello Guru's,
    So here is my requirement, we need to print check. We are using F110_PRENUM_CHCK and linked with driver prog RFFOUS_C. We have Letter size paper with three sections,
    1. Check
    2. Voucher Section (containing table of element 515, 525 and 530) 515: Heading, 525 : Regup-Belnr, Regup-XBLNR, Regud-Wrbtr.
                                                                                    530: Regup-SGTXT
    3. Voucher Section (As a receipt for bank itself) : contains same data as 2nd section.
    I tried several things reading all the previous post over here in SDN.
    1. Created Z form created two instances of main window it results just single display of table (voucher section) in section two and not in third.
    2. I also tried pasting two times same code in single main window which gives only last item line for the table.
    3. Created z driver program made changes in Write_form added control form for element 515 that does results in showing element 515 on both the location.
                CALL FUNCTION 'CONTROL_FORM'
                  EXPORTING
                    command   = 'NEW-WINDOW'
                  EXCEPTIONS
                    unopened  = 1
                    unstarted = 2
                    OTHERS    = 3.
                CALL FUNCTION 'WRITE_FORM'
                  EXPORTING
                    element = '515'
                  EXCEPTIONS
                    window  = 1
                    element = 2.
    3. For Element 525 and element 530 is not acting same. In the prog 525 = hlp_ep_element. And there are many write_form for this. I tried pasting each and every place same kind of code. It doesnt work. what it do it gives me three pages of output repeating every thing twice and weirdly.
    I am need this to be done as I already took so much time solving nothing is working.
    Please give me the exact location where to paste this code so I can have two times data of main window.
    Or is there any other way to do this....Any way will be good for me as long as it shows two times data in the form.
    The data is table.

    Hi Manju,
    I create a new window (no main) but does not run, please can you tell me what should I do to make it work.
    Best regards.
    Robert.

  • CC problem in RWB Component monitoring

    Hi people
    i am getting this error  in RWB component monitoring
    1 communication channels have an error status0 communication channels inactive0 communication channels not providing any status information0 adapters logging communication-channel-independent processing errors
    But sender&receiver CC are STATE is ACTIVE status
    Adapter Engine Server is RED mark
    All object's r correct
    PLS send me to ASAP
    Thanks & Regards
    shekar

    Hi There,
                               It saying that one of you CC in error and remaing things are ok.
    As you saying everything ok..then check the short log of the error CC ..that text give you an idea..
    the error may be occured some time back but it is still showing erro ..but everything works fine...
    Regards
    Rao

  • Two Time Capsules, now one is not visible.

    Our network has two Time Capsules, the model TimeCapsule6,109.
    TC #1 is the network's router. Its WAN port talks to the cable modem. One of its LAN ports connects to TC #2's WAN port. TC #2 is in Bridge mode. Both TCs are configured to "Create A Wireless Network" and both wireless networks have the same name etc etc. WiFi works well throughout the house.
    TC #1 is backing up a couple of the computers, TC #2 is backing up the others. This has all been working for a couple of months.
    Three machines were updated to Mavericks. I updated the fourth last night; it was on Lion (not even ML, just lazy). Before upgrading the other machines I manually started a Time Machine backup. I noticed that this machine hadn't been backed up in a day. When I manually started it, it could not find the backup disk, which was on TC #1. TC #1 didn't even show up in the Finder. That was odd, but I installed Mavericks anyway.
    Tonight I started to investigate. I'm on my main machine, an iMac running Mavericks, and I notice that TC #2's icon in the Finder under shared looks like the Time Capsule, but TC #1's icon is an old computer monitor. I can click on the icon for both and connect and see the disks.
    I open up Airport Utility. TC #2 is visible, TC #1 is not. I open up the iNet utility and scan the network. Both Time Capsules show up, but only TC #2 identifies as a Time Capsule. TC #1 does show that it's the gateway.
    iNet has an "Airport Monitor" option. I select it; only TC #2 shows up.
    What's odd is that the network still functions; TC #1 is the router/WAN interface, and all of that still works. I can get to the network from outside with Back To My Mac and I can see my Subversion repository (via http) and all of that. It's just that TC #1 doesn't appear to be a Time Capsule in terms of its visibility to Airport Utility and to Time Machine.
    Ideas?

    Maverick has changed a number of things.. which can mess things up.
    Firstly reboot the network.. so everything off.. restart the modem.. wait 2min.. restart the TC#1.. wait 2min, restart TC#2.. wait 2min.. then restart the clients.
    Do the TC disk show up?
    Any continuing issue manually mount the TC disk.. in finder use Go, Connect to Server and type the address,
    AFP://TCname
    That will then hopefully get past this problem.

  • Safari Two Times

    hi there.
    anyone know why I always have to input my password to MSN two times before it takes?
    Does the same thing with Firefox
    -- tried retyping sever times - always works on the second try.
    To save time, my "workaround" has been to enter any key into the password window / enter/ then type my whole password
    happens every time on the Mac
    I also have a pc and it works the first time with Explorer so, Im convinced its something to do with the Mac settings.
    best, M/

    I have created a testcase
    http://www.maakmenietgek.com/test6
    Best is to open safari, open the webinspector in the resrouces, and then browse to this page.
    I should load with a red square, after 3 seconds it should load a green square, and 3 seconds after that you will see the blink. In webinspector you can see that the green image is reloaded.

Maybe you are looking for