Every time a new message arrives in mail a window pops up saying that os x needs my keychain password: how to stop that?

every time a new message arrives in mail, a window pops up saying that os x needs my keychain password: how do I stop that infernal nuisance?

Hopefully this will help you. Try placing your iPad in recovery mode again. You may have to try this a few times.
iOS: Unable to update or restore

Similar Messages

Every time I want to download an app From AppStore when I start downloading it after I write my password there is warning that says to me that it isn't possible right now to download power DVD mobile even now were this app is deleted from my ipad

Every time I want to download an app From AppStore when I start downloading it after I write my password there is warning that says to me that it isn't possible right now to download power DVD mobile even now were this app is deleted from my ipad

The power DVD app is active, and seems to download ok. You have already deleted the app?
I suspect what is happeneing is that a download is in your queue, and is blocking the queue until it completes, thus the message every time you try to do a down load. It may be failing because while it thinks you have the app, it is not finding it, and doesn't know what to do. ( sounds like a poorly designed download).
I think the way around this might be for you to resync with your iTunes, and let it reload the app onto your pad. Let it complete the download. Then, if you do not want the app, delete it again from your pad, and if you never want it, from I tunes as well.
The next time they do an update, you may wind up in the same situation, so if it happens again, until they fix the download routine, you will get stuck again.
So try the suggestion, and see if this clears it out.
The other option would be to open your account in I tunes on your computer, let it complete the download there.

HT2731 every time i try to go to the iTunes store, my ipod says "Cannot Connect to the iTunes Store". How do I get it to log into my account?

Every time I try to go to the iTunes store from my iPod, it says "Cannot connect to iTunes Store". How do I get it to connect and log in to my iTunes account??

Do other apps connect to the internet on the iPod e.g. Safari ? If they do then try logging out of your account on the iPod by tapping on your id in Settings > Store and then log back in and see if it then works.

Every time I try to download a song an alert pops up saying this device is already associated with an Apple ID

It's annoying

Okay, can you reply letting me know if the computer was purchased used?, this will help as it would identify the possibility that the prior owner did indeed create some sort of block.
Next, what you are speaking about blocks in regards to downloading 'PDF software'...is it PDF 'software' or PDF files that are blocked?, it appears that maybe it's the PDF files which are blocked at which case it indeed my be programmed into the system.
Please answer these and we can further assist you in reaching an answer. As for this list you have provided, I would need more than simple bullets....if you can provide the location of these 'bullets' and file extension...that would get the ball rolling.
Thanks

HT2589 I keep on trying to buy the pages and numbers apps and every time I put in my payment info the window comes up saying 'session timed out''?

Can someone please tell me what I need to do? I've tried putting the date back a month? Is there anything else I can do?
Thanks

On iPhone 4, 4s and 5 and Ipads IOS6, go to settings, and locate Store. Click your Apple ID and sign out on Store and then re-sign in your Apple ID, and session timed out issue will be fixed. I tried this myself and confirmed working =) Good Luck.

Every time I try to launch Safari "Safari quit unexpectedly" pops up.

Every time I attempt to launch Safari an error sign pops up saying that safari "quit unexpectedly." I've restarted and searched other forums, but none of them have solved this problem. Anyone know how to fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Every time I try to use Photo Mail in PSE 11 the program shows error and close

How to use Photo Mail in PSE 11 as it close every time I try to access

Problem have been solvedThanks for your crystal clear instructionsI do appreciate your help and care so muchGod bless you all
Date: Wed, 3 Apr 2013 09:58:39 -0700
From: [email protected]
To: [email protected]
Subject: every time I try to use Photo Mail in PSE 11 the program shows error and close
    Re: every time I try to use Photo Mail in PSE 11 the program shows error and close
    created by Andromeda14 in Photoshop Elements - View the full discussion
Please follow steps as mentioned on blog: http://tinyurl.com/cy9beny ~Andromeda
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5203304#5203304
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5203304#5203304
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5203304#5203304. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

New Message Arrived -- but I don't really have any!

I am going batty...After I (obviously) added some apps, every time I turn on my Droid Charge, I get a voice prompt that says, "New Message Arrived". I have checked & looked & searched, but I'm darned if I can figure out WHERE that notification is coming from!!!
I searched through the forum but haven't been able to figure out how to stop this erroneous notification from broadcasting every time I turn on my phone.
Can anyone help? Any suggestions on where to look?
TIA,
Connie in MI

My daughter found the solution on the Droid Forum http://www.droidforums.net/forum/samsung-droid-charge/160534-changing-notifications-sounds.html
The member said, "Found it. It was under " text-to-speech" settings...had to uncheck "driving mode" which states all incoming calls and messages will be read out loud automaticly. "
As soon as I UNCHECKED that Driving Mode setting, life was back to wonderfulness!!!!
Thank Goodness!

I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

I downloaded the new 6 software. Me and my boyfriend share the same iTunes account and now every time I text him I also get a copy of the text sent to my from my number. How do I get that to stop?

Go to settings > messages > send & receive
check or uncheck the correct phones numbers and/or email addresses

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

HT3209 every time i try to buy anything an error box pops up that says my apple ID has expired and i try making a new one but it keeps telling me the same thing. what do i do?

every time i try to buy anything an error box pops up that says my apple ID has expired and i try making a new one but it keeps telling me the same thing. i cant find an answer to my problem no mater what i do.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please

I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another. Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
I cannot for the life of me figure this out.

What you need to do is connect your phone to iTunes but do not click sync. Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes. When it's done transferring, locate your phone on the sidebar and click it. Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone. After selecting your apps then you can sync. Once you do this you should never have your problem anymore.

I opened Google Chat in a tab and pinned it as an App Tab, but the App Tab does not "glow" when new message arrives in Google Chat.

I am running Firefox 4.0.
I opened this page for Google Talk (http://talkgadget.google.com/talkgadget/client), signed in, and initiated a chat with one of my contacts.
Then, I pinned the tab (containing the above chat page) as an App Tab.
According to the documentation for Firefox 4, when the contents of an App Tab's page is changed, the corresponding tab is highlighted.
However, when a new chat message arrives in the Google Talk page (that corresponds to the pinned App Tab), the tab is not highlighted.
App Tab highlighting works for Gmail, and other web pages (i.e., when other web pages are pinned as App Tabs the corresponding tab is highlighted when the contents of the page changes), but App Tab highlighting does not work for the Google Talk page. Is this a bug in Firefox 4?

Thanks for the quick replies.
@cor-el: I think you are correct ... App Tabs do not glow when the content of the page changes (which would result in the tab "glowing" when a new Google Talk message arrived) ... but App Tabs only glow when the tab title changes.
I thought about writing a java script (to be used with greasemonkey) to change the tab title when a new message arrives in the Google Talk page .... but the Google Talk page looks like it's Adobe Flash.
I know that there is a "beep" when a chat message arrives, but I wanted some kind of visual notification (like the glowing App Tab) when a message arrives (because my computer is playing music and I don't hear the "beep" when a message arrives).
Any suggestions for getting a visual notification when new Google Talk chat message arrives?

Every time a new window in safari opens, it takes about 2 minutes before I can actually use it. Can anyone help?

Every time a new safari window opens, it takes several minutes before I can actually use it. This seems to have started after the most recent updates. I have reloaded the operating system, but the problem persists. Ideas?

Found the problem Plug-ins (extensions?) I had loaded were not compatable with latest update. Once they were deleted, sfari runs fine. Hope this helps others

Every time i click on a link another random link pops up in a new window. Does this mean i have a virus on my mac?

every time i click on a link another random link pops up in a new window. Does this mean i have a virus on my mac?

No; it means that the computer has adware. Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(122523)

Every time a new message arrives in mail a window pops up saying that os x needs my keychain password: how to stop that?

Similar Messages

Maybe you are looking for