Every time a new window in safari opens, it takes about 2 minutes before I can actually use it. Can anyone help?

Every time a new safari window opens, it takes several minutes before I can actually use it. This seems to have started after the most recent updates. I have reloaded the operating system, but the problem persists. Ideas?

Found the problem Plug-ins (extensions?) I had loaded were not compatable with latest update. Once they were deleted, sfari runs fine. Hope this helps others

Similar Messages

Even after uninstalling and re-installing adobe, I still get this error message every time a new window opens. How do I cure this: Windows cannot find '(see details below)'.

This started immediately after I updated the Adobe Reader for the first time. Here's the file name: C:Documents and Settings\Terrel B\Application Data\Moxilla\Firefox\Profiles\gfl6v9u5.default\extensions\{E2883E8F-472F-4fb0-9522-AC9BF37916A7}\chrome\content\getPlusPlus_Adobe_reg.exe

I think there might be a bug in FF18. After the upgrade, I would also get the error message and couldn't open any site, though using "No proxy" worked I believe. Turns out I had something set under network.proxy.socks (and network.proxy.socks_port) (leftovers of tests done a while back) and even though they shouldn't have been used (I believe, FF17 didn't & I'm using "Use system proxy settings") they obviously were, leading to the problem.
Just resetting those 2 options fixed things for me, and I didn't have time to look into it more, but there might be a bug in there somewhere...
Maybe try checking under about:config if you have any proxy settings set (that you don't need/use) (You don't seem to have any set, but I can't recall if they were visible in the Preferences window or not for me...), and if so reset them. Or just look for any (network) options not using its default value... (Assuming, as it did for me, that running FF18 with a brand new profile works fine.)

I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. Is it Lion?

I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.

Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Every time a new message arrives in mail a window pops up saying that os x needs my keychain password: how to stop that?

every time a new message arrives in mail, a window pops up saying that os x needs my keychain password: how do I stop that infernal nuisance?

Hopefully this will help you. Try placing your iPad in recovery mode again. You may have to try this a few times.
iOS: Unable to update or restore

Whenever I open a new tab a new window is also opening at the same time, and when i close that tab thet window is also closing. what to do?

Whenever I open a new tab a new window is also opening at the same time, and when i close that tab that window is also closing. what to do?

Swarnava, thank you very much! that did it and I am Bing-less . . . OH HAPPY DAY!! WOOHOO!!!! thank you, thank you, thank you!

Dual monitor - force new windows to always open on primary monitor?

I use my secondary monitor to watch streaming TV in internet browser windows. When I have finished watching streaming TV and the secondary monitor is switched off, Safari still opens new browser windows on the secondary monitor by default (presumably due to the fact that the last active browser window was open on the secondary monitor). This is irritating and means I have to switch the secondary monitor back on to drag the new browser window back to the primary display. The secondary monitor is connected by VGA.
This is a minor niggle, rather than a major issue, but it is irritating nevertheless! Does anyone know if there is a way to force new windows to always open on primary monitor, regardless of where the last active window was?
Any help much appreciated.
Many thanks,
Ben

After many days i found solution:
Run the client and get it set up the way you prefer, or Open your saved RDP file
On the Display tab, choose a non-fullscreen resolution.
On the General tab, click "delete these credentials", if possible.
Click Connect .
You will immediately get a local login dialog. Leave it blank and click
OK .
When you are connected and the remote login dialog appears, drag the window to the desired monitor.
On the remote login dialog, click Cancel . The settings dialog should reappear locally.
On the Display tab, you can now choose fullscreen.
You can now save your session with the Save button on the
General tab, as well as save your login credentials.
Try more times ,worked for me.

Every time I try to launch Safari "Safari quit unexpectedly" pops up.

Every time I attempt to launch Safari an error sign pops up saying that safari "quit unexpectedly." I've restarted and searched other forums, but none of them have solved this problem. Anyone know how to fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

New windows don't open on top of each other in Firefox. How can I make that happen?

New windows don't open on top of each other in Firefox. How can I make that happen? That is, every time I open a new window, it won't open on top of the old window, and instead is positioned to the right of it. I'm on a mac. Please help.
== This happened ==
Every time Firefox opened
== Today

I see. I'm not aware of how to fix this in Firefox. Usually you want to tweak your Winow Manager preferences for opening new windows.
Example: sawfish preferences for Linux.
Since Mac OS X doesn't have any preferences, you have to use Applescript or another technique. I found [http://amitp.blogspot.com/2006/08/mac-os-x-window-management-spooky.html Spooky], maybe there are others. I haven't tried it, but here is the [http://www.doernte.net/spooky.html Spooky Download and Description].

When I open FF it asks me EVERY time which file I want to open firefox.exe with. When I choose FF, it opens a savefile prompt and opens a blank web browser.

When it opens and I choose FF to open .exe with, it won't let me click the box that says use this program from now on.
Also it doesn't matter if I save the file or not, it asks every time.
Then when the screen opens, it is a blank browser. I just click on my bookmarks to get me started, but I've tried setting up my home page, it won't start up there though.
I've already tried a new shortcut, but the program file does this too.
I tried updating my version of FF, it's not helping this problem either.
I also found an article about a web page fixer program that is supposed to help with the box checking that says always use this program, but it hasn't helped either.

My solution to my original problem of stopping FF from intruding with an erstwhile search doesn't work. Firefox IGNORES my settings to NOT check for updates to addons (letalone disabled and unwanted addons). It continues to check when I reopen FF. What a PITA>
Further, it gives me no solution. Just takes more than a minute of my time waiting for it to stop.
grr

How do I change opening a new window so it stays on the new window when I open it?

When I click on the 'New Window' button, it opens a new window than immediately goes back to the original window. I want the new window to remain displayed until I choose to go back to the original window.

Sounds that you've clicked the Rest button and have created a new profile.
Note that "Reset" creates a new default profile with a time stamp appended to identify it and tries to recover settings like bookmarks and history and passwords and cookies and auto-fill data from the old profile, but you lose data like extensions and other customizations.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox 15+ versions will move the old profile folder to an "Old Firefox Data-##" folder on the Desktop that gets a number appended if you use reset more than once.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Why does firefox crash in iTunes? Also, in my tool options new windows are to open in a new tab. They don't, why?

Foxfire wasn't connecting to the web and I had to reinstall it.
Since that time I haven't been able to access iTunes and new windows don't open in new tabs

I completely uninstalled the printer and drivers and restarted the computer. I then uninstalled and then reinstalled Firefox 7.0.1, restarted the computer and then reinstalled the printer (from the previously downloaded exe file, because I don't have the CD for the printer). Unfortunately, neither of those things worked, but I did notice that when I uninstalled Firefox, it asked if I wanted to save settings, and I said yes and it seemed to remember the Dell 720 printer in the "about:config" menu. So, maybe uninstalling Firefox without saving settings would make a difference. What do you think? Also, I just noticed in the "Add or Remove Programs" menu in control panel that the icon next to "Dell Photo Printer 720" is a little recycle bin, which seems a bit odd. On the dell.com forum, someone suggested using Firefox 5.0.1, available at a different website. Is this worth a shot or are there other more conservative troubleshooting suggestions to try first?

Every time I try to turn on Genius in iTunes, iTunes get shut down - I'm using a Windows 7 pc with iTunes 10.5.1

Every time I try to turn on Genius in iTunes, iTunes get shut down - I'm using a Windows 7 pc with iTunes 10.5.1.
It started after I bought a new PC, everything worked fine at the old one.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Chkdsk run every time I startup Windows Vista under Bootcamp in 10.6

I have Windows Vista 32 bits installed on bootcamp partition and it work fine in 10.5.
Now I have upgrade my MBP (early 2008) to Snow Leopard, and upgrade WIndows Bootcamp drivers to version 3.0 from Snow Leopard DVD. Both installation were completed and run fine.
The problem I have now is: Whenever I used Mac OS, shut down, then restart the WIndows Vista by pressing Option key at Macbook Pro startup, Chkdsk will run evry time, checking integrity of the Windows boot partition. I have to wait for more than 20 minutes before Chkdsk fix all errors, then reboot, and press Options key to get back into WIndows Vista without Chkdsk running.
When I shut down Windows, and restart without goinb into Snow Leoprad, the boot process go OK without Chkdsk running.
But whenever I shut fown Winodws and use Snow Leopard, then get back in to startup Windows, Chdsk run again. This is very annoyingm, and never occured in 10.5
During Chkdsk session, the following errors occured and being fixed:
Deleting index entry ._501 in index $I30 of file 9028
Deleting index entry 501 in index $I30 of file 9028
and after all process finished, Chkdsk stated that: There is a blank space that allocated as used, and has been fixed.
Can any friend advise me what cause this problem? and How to correct it?
I understanfd that the ._501 is in .Trashes folder on Windows partiton. It must be altered wwhen I use Snow Leopard, and must have to do with Trash in Mac OSX 10.6.
Can any friend advise me how to solve this problem? Thank in advance

The problem is repeatable. The same index and file to be deleted by Chkdsk remain unchanged every time I boot Windows under bootcamp after using Mac OS. If I reboot Windows many many times without using Mac OS, the error never occur.
It must be Mac OSX Snow Leopard that is the culprit. Can any friend give me solution of how to solve this problem?
When I try booting Windows in Parallels the boot is OK

Every time a new window in safari opens, it takes about 2 minutes before I can actually use it. Can anyone help?

Similar Messages

Maybe you are looking for