Every time I attempt to place a bid on eBay I am immediately logged out

I do not notice ANY problems while on the eBay site except that ANY TIME I place a bid I am immediately logged out.
This started several months ago.
I have checked all add-ons
I have cleared EVERYTHING re: eBay
The ONLY plug-in I can suspect is McAfee but I'm hesitant to turn it off for security reasons & I would THINK if it was their problem it would have been addressed by now.
IE8 works without a problem

I was getting this error and tried everything. The only thing that worked was uninstalling Silverlight 4.0 and going back to 3.0, which I got from oldapps(dot)com

Similar Messages

Every time i close firefox, to re-open it i have to either log out and log back in, or i have to go through the task manager and end the proccess, otherwise it just says fire fox if already running and it wont open, how do i fix this proble??

Everytime i am finished using Firefox, if i want to go back onto the internet, i now have to either log off and then log back on. or i have to use the task manager and close the firefox process, it is extrlmely annoying as i have to do it everytime, if i try and open firefor before i do either of what i have explained it just comes up with, firefox is allready running please close all windows to open a new one, or end the process...how do i stop this message from popping up every single time i use firefox????

https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

Every time I place a bid on Ebay my firefox crashes and must be restarted.

Every time I place a bid on Ebay my firefox crashes and must be restarted. This is the only time this happens. It seems to be ok until I actually confirm the bid and within a second or two firefox crashes.

This is most likely caused by '''The Browser Highlighter''' add-on. Uninstall or disable this add-on from Tools -> Add-ons -> Extensions. You could also try finding an update for this extension.
See [[Uninstalling Extensions]] and https://support.mozilla.com/en-US/questions/682558
If that does not solve the problem:
Go to the address '''about:crashes''' and tell us your latest crash IDs. We can then look at the data specific to your crash and have a better idea of what is causing the problem.

Uprgraded to yosemite all good but iphoto crashes every time I attempt to upgrade the photo library

Hi all,
This is driving me insane.
I have uprgraded to yosemite all good but iphoto crashes every time I attempt to upgrade the photo library:-
I have upgraded to yosemite 3 times in case thats where there problem was - no.
I removed and reinstalled the new iphoto program about 5 times - no avail.
I have installed iphoto library upgrader but it says that my library does not need it.
I have installed iphoto9.1 update but it states that it cannot be installed on the disc as iphoto 9.0 or later must be installed but i have installed the latest version?
I have even upgraded the server and i paid for this.
When i open iphoto in applications it will open then state that i need to upgrade the library - i am happy to do this.
I agree to this then iphoto crashes and closes before doing anything else.
I have also tried holding the option button and opening iphoto but it crashes all the same.
I am at a loss what to do. I could not access my library at all but i managed to find all my pics in finder so i have backed everything up and deleted all the files in the hope this would fix it - nope. Still the same.
Does anyone have any suggestions?? Please oh please, this has taken days and countless wifi hours...
TIA...

Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I can't open almost any app on my iMac (OSX Lion 10.7.4). Every time I attempt to do so, the app "unexpedtely quits" and can't go further. This happens with iTunes (when I turn to the iTunes Store), MacApp Store, Software updates an many other apps...

I can't open almost any app on my iMac (OSX Lion 10.7.4). Every time I attempt to do so, the affected app "unexpedtely quits", showing a window (sort of expanded dialog box) with the log history, wich form a complete report wich is said to be sent to Apple. Despite that this window has a "restart" button, I haven't been able to go any further from this point, as it repeats the process again and again, impeding me to use the affected app.
This has get to a critical point, as it is afecting apps like iTunes (especifically when I turn to the iTunes Store from within te app), MacApp Store, Software Updates (I can't update anything, given this problem) and many other apps, including Aperture 3, Fusion 4, integrated Dictionary and Wikipedia, as I've been able to verify.
As far as I'm concerned, it hasn't affected apps like Office, Vectorworks, Pixelmator, iDraw, Quick Note...
Can anybody help me on this matter?
Thanks a lot, in advance...
Marcus

Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

Crashes every time I attempt to open a software instrument GUI

I'm encountering a serious problem of crashing every time I attempt to open a software instrument GUI.
I'm working on a song with many software instruments (Ivoy, Stylus, Kontakt2, Kontakt 3, Toontrack Superior Drum 2.0, Trilogy, ecc.) and I can see on Activity Monitor that I am at the limit of Logic RAM addressing (Logic is at 2.57 GB and VM is at 3.90: I have 10 GB DIMMs).
Is perhaps my problem due to this RAM limit?
Note that the song flows smoothly if I play it and all is fine. But I can't open a soft Instr. GUI because Logic crashes.
If it so, I wonder why Logic has this RAM addressing limit. Is it due to the System architecture? Could it be surpassed in the future?

Yes Logic have a limitation on Ram and Virual Memory. I really hope an update could be done about that, cause without this i could too do a complete mix without doing bouncing or exporting the soft instrument as a audio track to regain some DSP. To Avoid this kind of situation is to twaek your virtual instrument (ex. Superior 2.0 load jus by defaut 982 Mb in the ram and virtual memory addressing to Logic, you can lower that by removing samples of drum you don't use - i use superior 2.0 with 2 setup one drum set load at 360 Mb and another one at 580 Mb at 24bit - you can also reduce the bit rate)... But i agree totally with you this limitation is ridiculous now our days we have powerfull machines and plugin and software that require more RAM. Architecture that was develop at the time of the first Logic.

Firefox has trouble initiating, and when it finally does, every time I attempt to interact with the application it stops responding.

Firefox won’t initialize: I can open any program on my computer except for Firefox so it isn't that my computer is slow. It doesn't open at all no matter how long I wait. I've left the room and let the computer run before and it still wasn’t running when I came back. After a few clicks it finally it comes up, and I have to wait because I’ve clicked multiple times so of course it's going to open multiple times. When I'm online after successfully closing all but one Firefox window so that I don't crash my poor laptop, every time I attempt to interact with the program via clicking a link, opening a new tab, or typing something into the URL bar, the program freezes and goes into the not responding stage. Rarely, an unresponsive script message will pop up.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Every time I attempt to download the 64 bit version of iTunes it just freezes my entire computer right in the middle of installation. Anything?

Every time I attempt to download the 64 bit version of iTunes it just freezes my entire computer right in the middle of installation. Anything?

Same problem.

ITunes crashes every time I attempt 'Create AAC Version'

Why, all of a sudden, using Windows XP and latest version of iTunes, does my iTunes crash every time I attempt to 'Create AAC Version' of any song? I've been converting to AAC for years, and I don't think I downloaded any updates recently but out of nowhere I can no longer use this crucial space-saving feature.

I was mistaken, the crash does not occur with just any song.. it is just one cluster of files. Even still, might anyone have a diagnosis and/or remedy for this issue?

I am trying to link slides, a specific slides to specific lines. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10

I am trying to link slides, a specific slide to a specific slide. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10; any ideas why? Thanks

create a shape on the slide e.g. a circle
right click the shape and select Add Link
make sure you select a specific slide number (don't select first previous or next)

Every time I attempt to render video Premiere crashes

I'm working on a pretty big project (for me at least) but when I was going to render a sample to send for feedback premiere simply refused and crashed.
It kept doing this every time I attempted to render an output file including ANY of the video tracks but if I disable them all it renders the audio just fine.
premie pro cc build 7
h.264
1920x1080
This project is very light on video but includes a lot of images and motion/transition effects
I had a similair problem last week on a project where I only used one video track and I was able to root out the issue as being a cross dissolve at the very beginning, why it's crashing now though is quite beyond me.
Unlike the error that plagued me that last time around I am able to render video in alternative formats, at least avi works fine.
FLV does not work
Anyone able to help me out with this?

Not sure what the core issue is (others are reporting similar problems) but if you can render to AVI, then just export a high-quality copy then re-encode to H.264 using Media Encoder (which will chew through very quickly in GPU mode). There won't be any visual difference compared to a direct H.264 encode.

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

Hi, every time I attempt to purchase OXS Mountain Lion I get a message that says unable to complete your purchase because "The product distribution file could not be verified. It may be damaged or was not signed." Any idea what I am doing wrong, cheers.

Welcome to Apple Support Communities
Press Shift key on boot and purchase OS X 10.8

ITunes "encounters a problem" every time I attempt to open

Every time I attempt to open iTunes, I get the "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" message. I've tried uninstalling and re-installing, it still doesn't work. Any advice?

same here...
i have taried evrething........ and every time i open it its encounters a problem and has to close....
what i need to do??

Every time I attempt to place a bid on eBay I am immediately logged out

Similar Messages

Maybe you are looking for