Every time I burn a CD I need to restart itunes!

Whenever I am burning CD's, I insert a new CD and itunes says I need to insert a blank CD. So I have to close itunes, than reopen it for it to recognize the blank CD. This has been an issue over multiple versions of itunes, but I am just now annoyed enough to try and find a solution. Anybody?

My computer does the same thing, it was fine before i updated I tunes. Im going to uninstall it, then reinstall the original i had and not update it untill the problem is fixed. I did that on my other computer and i dont have a problem at all with I tunes now.

Similar Messages

How do I fix my phone saying that I can't download paid apps? Every time it just says that I need to go itunes support and I done know how to fix it.

Please help me fix this

There is nothing that you can do if you didn't have a backup. You have to restore the iPad in order to unlock it. If you have never backed up or synced with iTunes you are pretty much sunk.
But If you have a backup in iTunes, you can restore from the backup and then sync with iTunes (or download from iCloud) and recover everything up to the point/date of the last backup.
You can restore with any other computer, but you will lose everything on the iPad.
Instructions can be found here.
http://support.apple.com/kb/ht1212
Make sure that you pay attention to the section at the very of the article that talks about having never synced your iPad with iTunes. You may need have to restore the iPad that way.
You may need this. Recovery mode.
http://support.apple.com/kb/ht4097

The application manager keeps crashing every time I open it. I need to install the After Effects trial, what to do?

The application manager keeps crashing every time I open it. I need to install the After Effects trial, what to do? I have a Mac with maverik.

uninstall it and then reinstall it.
if that fails, uninstall,clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I have been trying to update my software in my macbook pro, but every time I go through the motions of updating/restarting my computer nothing happens and it still shows I need a software update. Anyone know why this is happening?

I have been trying to update my software in my macbook pro, but every time I go through the motions of updating/restarting my computer nothing happens and it still shows I need a software update. Anyone know why this is happening?

How large is your HD and how much space do you have left?
Check out the following & do the necessary:
Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
Try SU again.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.

I am trying to scan a photo on to my computer but every time i try it says i need to update the lcd

i am trying to scan a photo on to my computer but every time i try it says i need to update the lcd

TRY FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

gets and error and closes.What should I do?
If Safari is crashing.. post a crash report so we can try and help...
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply including the, "binary images" seection.
If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

After I close Firefox I am unable to reopen, I get a message that I can't reopen until I close it, but it is already closed. This is happening almost every time I close Firefox. I have to restart my computer in order to open Firefox.

After I close Firefox I am unable to reopen, I get a message that I can't reopen until I close it, but it is already closed. This is happening almost every time I close Firefox. I have to restart my computer in order to open Firefox.

Same problem here thinking to move away from firefox now

I have the new iPad and I could not use I tunes , every time I get an error says "cannot connect to itunes store " please help

I have the new iPad and I could not use I tunes , every time I get an error says "cannot connect to itunes store " please help

Sorry, yes iTunes on your computer.
When I updated my iPad 3 and iPod Touch 4th generation to iOS 6 a few months back, I was able to update the iPad effortlessly over WiFi. but I kept getting error messages when trying to update the iPod over WiFi, so I used iTunes on my MacBook Pro.
Connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update
If you are using iTunes 11, go to View>Show Sidebar at the top - so the sidebar is visible.

Every time I try and update mu devices from my itunes account I get an error unknown error 9006

every time I try and update mu devices from my itunes account I get an error unknown error 9006

Hey burtonpg,
Thanks for the question. If you are receiving a 9006 error when attempting to update or restore your devices in iTunes, this usually means that there is a conflict with security software on your system:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks,
Matt M.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

HT1600 my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times.

I uses Time Machine to transfer files and program from old to new MacBook Pro. Aperture doesn't work. Every time I open Aperture the computer need me to key in Serial number. How do I fix it.

Hi There,
I purchased a new MacBook Pro Retina 15". Since I am using MacBook Pro and I uses Time Machine for backup files and program. Store saleman tell me I can retore my existing program and files from old MacBook Pro to new MacBook Pro computer. After files transfer it seem to be OK. But only Aperture has a problem when every time I open Aperture to edit photos, MacBook Pro ask me to key in the Aperture Serial Number that made me so inconvinent. Did any one have meet this problem and can someone teach me how to fix it, Thanks.
Nelson

Either the license files were not transferred or it has to be relicensed.
Remove and then re-install aperture. On an rMBP this should take only a couple of minutes.

I use speeddial addon and it now keeps going off every time I close firefox and I need to reinstall it every time. What can I do to stop this happening? Thanks!

My homepage now says
XML Parsing Error: no element found
Location: chrome://speeddial/content/speeddial.xul
Line Number 1, Column 1
every time I open firefox.
I then have to reinstall speeddial every time I start up. This never used to happen before and I don't think I've changed any settings.

Been in touch with the author of the product and got the following reply:
The problem is the SiteAdvisor extension that McAfee installs; go to Tools > Add-ons, in the resulting panel select "Extensions", locate SiteAdvisor, click on it to select, and then click the "Disable" button; Speed Dial will work perfectly after that.
I already contacted them to attempt to fix the problem, but no reply so far. The problem happens before any Speed Dial code is executed, so I don't think I can fix it on my side.
Don't have the problem any more, note I had a McAfee update just before the problem started happening.

Every time I burn a CD I need to restart itunes!

Similar Messages

Maybe you are looking for