Every time I click on the iphone tab it disappears?? How do I get to see the data??
Everytime I click on the iphone tab when I connect my iphone to my computer via USB and when I go to click on the iphone tab which would usually say jades iphone it disappears???
When you click on the iPhone tab, then you should see more tabs on top (Info, Music, Books, etc.) where you can set everything you want. The tab far on the right shows the actual content of the device.
The Data Info should be all the way down on the site.
Similar Messages
-
I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?
I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?
-
Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
How do I get rid of "Yahoo! Search - Web Search" that comes up every time I click on a new tab?
How do I get rid of "Yahoo! Search - Web Search" that comes up in address bar every time I click on a new tab? I have to delete it in order to go to the site I want. Very annoying. I can not find it in program file.
Got this fixed.
I deleted Yahoo as a search engine.
To do this: on the right hand side of a toolbar there is a pull down menu which contains "manage search engines". Select this and remove "Yahoo".
BTW: the "Tools" - "Options" - "remove hardware acceleration.. " did not work.
George -
I recently updated to Firefox 8 and ever since I have done that, I can't get it to open. Every time I click on the icon on my desktop to open it, it crashes. I have tried all the steps in the Firefox crashes article and I can't figure out what is wrong. How can I fix this?
please install latest version of Roboform 7.6.2 and try
* www.roboform.com/support/news -
I'm new to photoshop cc 2014. As I try to type in the text box my text won't show up and every time I click on the layer it alway progress rendering type? What does that mean and is there a way I can turn it off?
Check online with the web site of the maker of your video card for an updated driver (assuming you're running Windows).
-Noel -
my i tunes radio app crashes every time i click on the regional mexicano station, also, randomly while i am playing on my phone, the screen turns white the apple logo appears and 3-4 seconds later i an taken to the lock screen, what is wrong, is it the iphonr, or is it just a bug that can be fixed in later ios versions????
please install latest version of Roboform 7.6.2 and try
* www.roboform.com/support/news -
Is Catch Playhead supposed to turn on every time I click in the ruler to move the playhead?
Is Catch Playhead supposed to turn on every time I click in the ruler to move the playhead or click and drag the playhead?
For me it does.
I'm running LPX 10.1.1 and OS X 10.10.2.Logic Pro>Preferences>General/Catch
-
How do I combine files, every time I click on the link "combine files", the answer I receive is a suscription window, I already have a monthly suscription!
A quick alternative to email.
Copy the files onto a USB drive. Make sure that "Ignore permissions on this drive" is set. (Get Info on the drive from Finder).
Then copy them from the drive to the destination user account.
Cheers,
Rodney -
I have a white box appear on desktop every time I click on the desktop. How can I remove it?
Can anyone help me remove this little white box that appear every time I click on the desktop?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
How do I get the 5.7 LR update? Every time I click on the download button, the splash screen trying to sell me the cloud stuff pops up. I don't want to buy anything, I just want to download the update. Anyone know how?
Hi Don. You can find it here: Product updates
-
Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date/time shows up incorrectly. It started happening after I updated to OS X Mountain Lion.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
How can i make it so every time i save something the date is included in the title?
how can i make it so every time i save something the date is included in the title?
More information would be helpful. Are you doing this in an application? If so, what application.
-
i bought 3 songs from itunes and when i upgrade my iphone all songs disappeared. how do i get them back?
Sync it the same way you got it on the device to begin with.
-
Every time I click on the finder symbol it says application finder can not be opened
I can not use my finder icon. every time i click on it it pops up (The application finder can not be opened)
Post the full text of the message, including the error code, if any.
Launch the Console application by entering the first few letters of its name into a Spotlight search. Enter the application name in the “Filter” text field. Post the messages from the time of the last crash, if any -- the text, please, not a screenshot
Then, still in the Console window, look under "User Diagnostic Reports" for crash logs related to the application. Select the most recent one and post the contents -- again, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) -
I like to learn things from youtube tutorials.. but the window there is small, so i want to maximise it on my old smaller monitor and work on my other. (like blender tutorials.. where i need to model on main monitor while i watch how to do it on smaller one)
Problem is, every time i click on my main monitor, maximised youtube video minimases.
So what do i do to stop this from happening?
Thank you for answering my guestion. :-)From what I've seen I think the labels you use linux, either. The solution I think would be to open Firefox on the desktop, and let it open on that desktop on the monitor you want and then the other task in another desktop on the other monitor.
Hope that helps, greetings!!
Maybe you are looking for
-
Calendar display item form - wrong value in datetime
Hi, I've created a new Displayform for a calendar. But it doesn't show the Start- and End-time correctly - not adjusted for local time. The default DisplayForm shows correct time. What am I missing? jik
-
Convert NOT IN to NOT EXISTS if possible
Hi, I have this query which is returning the correct results SELECT hdr.order_num ,hdr.business_unit_id ,dtl.item_class_id FROM xxx.dd_ddhdr hdr ,xxx.dd_dddtl dtl WHERE hdr.order_num =
-
Drill down issue in report painter report
Hi- We have an issue where the drill down in one of our report painter reports isn't working. When the user tries to drill down, it says the list contains no data. However, if the target report (of the drill down) is run first, and then the report p
-
Platform Support for WLS 5.1 SP9 and / or WLS 6.x
When will BEA support WLPS with either WLS 5.1 SP9 or WLS 6.x?
-
I am starting to test software center and when I publish Packages I do not get the option for Categories or the option to choose if it requires Approval or not. Is this possible or to get those features do you have to create applications?