Every time I click print in Pages I get the beach ball and my mac freezes.

I just updated to the newest version of pages and every time I click print in pages I get the beach ball and my mac freezes. Any suggestions on fixing this? I've tried shutting down and restarting several times...nothing seems to be working and I'm loosing/wasting time trying to fix this...

Hey there nmiller0528,
It sounds like you are unable to print from Pages at all from your computer. I want to recommend troublehsooting the Mac OS for print issues with this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling

Similar Messages

  • Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts

    Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts. It has only been over the last week or so I also found Safari will not load up and tyou have too open then shut from the drop down then restart it to get a page, any help pleas?

    Do this:
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall
         Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Every time I open Mail it fails to respond, the windows stay blank and I get the beach ball and can only close it by force closing. Any ideas?

    Every time I open Mail on my Macbook Pro, which is only a couple of weeks old, it fails to open, the windows stay blank and I get the beach ball. The only way I can get it to close is to force it using the command alt esc buttons. Any ideas?

    Hi Elijahcross,
    If you are having issues with iTunes freezing shortly after opening, you may find the troubleshooting in the following article helpful:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    - Brenden

  • I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

    I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

    Check your settings in Options > Applications: https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox#w_check-firefox-settings
    Also see:
    *https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
    *http://kb.mozillazine.org/File_types_and_download_actions
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

  • I cannot print any websites; every time I press "print" it goes to "save the file as [xps]" instead. What's up?

    I cannot print any websites; every time I press "print" it goes to "save the file as [xps]" instead. What's up? I can print in Word without problem.

    Bless you, bless you, bless you. After months of living with this annoying problem and not being able to print out emails or websites it is, in a stroke, totally solved. Thank you! It works. It's a wonder and you're a winner!
    Paul

  • My iPad 2 lost its mail after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail.

    Lost my mail
    after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail. how to restore?

    Answering my own question here. It's fixed! Another user recommended I switch to another wireless network then back to mine. And it worked! Mail is sending again with no problem.

  • Every time I click on March on my calendar, the calendar closes. Any ideas?

    Every time I click on March on my calendar, the calendar closes. Any ideas?

    Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day (if you don't sync your calendar from anywhere then try going into list view, go to 1st April and change any 'all day' events to times e.g. change Easter Monday to start at something like 4am) - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving on the day before.

  • HT201210 stuck in recovery mode and every time i try to recover it i get the error code 3194

    I tried to update my iPhone 3gs, and it failed to update, and now it's stuck in recovery mode and every time i try to recover it i get the error code 3194
    Does someone know what i should do?

    Make sure you are using current iTunes on your computer. Click the iTunes Tab at the top of this page. Or try to Restore your iPhone with a different computer.

  • Every time i try to open itunes i get the 'Itunes Setup Assistant'

    Every time i try to open itunes i get the 'Itunes Setup Assistant' even though i have already installed and configured itunes. And after exiting this i get onto itunes but all of my music is GONE. (even though i know i can always import it back) But this means that whenever i want to use itunes i have to configure it and import all of my tunes again which takes ageees. The, as soon as i go to open it again i have to repeat the whole process!!! By the way, i have already tried re-installing itunes and every other apple device completely on my computer, but nothing is working!!! ANY HELP WILL BE MASSIVELY APPRECIATED!!! Ps. this only just started happening a week or so ago.

    This just started happening to me last week also. After I went through the setup process I could get into my itunes but would get a msg about library not being saved due to user not being an administrator. I went into my program files opened the itunes folder right clicked on the itunes music folder and clicked on "Run as administrator". I haven't had a problem
    since. Don't know if this will work for you but I guess it won't hurt. good luck.

  • I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

    I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?

    Hello mrmacjohn,
    Verifying that any iCloud account that may be signed in is signed out should resolve this error.
    On your Mac, open iCloud preferences, then click Sign Out.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Cheers,
    Allen

  • I am on the Adobe Cloud, but for the past few days every time I attempt to open indesign I get the message missing plug-in Actions. RPLN, and the app will not open.

    I am on Adobe Cloud but over the past few days every time I try to open indesign I get the message that there is a missing plug-in Actions. RPLN, and the app will not open. Any ideas?

    Hi, when I try to open indesign itself this message comes up:
    Adobe Indesign cannot load the ACTIONS.RPLN plug-in. The plug-in requires
    the 10.1 version of indesign.. Please contact the vendor to get a
    compatible version of ACTIONS.RPLN.
    I am not able to click off the message to make the box disappear, so have
    to crash out.
    Paul

  • I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this?

    I have a MacBook Pro version 10.7.5 Every time I try to open iphoto I get the warning: "To open your library with this version of iPhoto, it first needs to be prepared. You have opened this photo library with a newer version of iPhoto." How do I do this? I recently bought aperature, and it has been since then that I get this warning.
    Thank you!

    No I have not tried those things. I don't even know what that means I suppose I have the newest version of aperature; I just bought it 4 days ago.

  • When carrying out some house keeping on my bookmarks, every time I delete or move or add a folder I get the beach ball showing and a very delayed response where everything freezes. Any ideas

    When carrying out some house keeping on my bookmarks, every time I delete or move one or add a folder I get the beach ball showing and a very delayed response where everything freezes. Any ideas?

    If you're synchronizing Safari with iCloud, disable that temporarily and see whether there's an improvement.

  • I just activated Lion and I get the beach ball with every action?

    I am using a Mac Pro and have been using Snow Leopard, installed on one Hard Drive, with no problems. I have downloaded and installed Lion on another drive and when I activate it every time I click on anything with the pointer I get the BEACH BALL for about 4 minutes. There must be a solution, but I can't find it.
    Help!
    Bob

    Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
    You'll have to setup the program again.
    cheers
    rob

  • My iMac locks up constantly in email. I click on one or two emails. Then when I click on another email, I get the spinning wheel and have to relaunch. Why does it get confused and lock up?

    My iMac locks up constantly in email. I click on one or two emails. Then when I click on another email, I get the spinning wheel and have to relaunch. Why does it get confused and lock up? Seems like it is stuck.

    10.6.8 here, MacBook Pro. Comcast. Mail  freeze ups. Occasional warnings to use "Log Out" under the Apple icon.
    Disk Repair run several times. Shows lots of Java  "remote" issues.
    I run Disk Repair several times, shows a lot of Java, "remote" issues.
    Restart don't know if it helps, I do it all the time. What's with quitting Mail but it doesn't quit, and why a separate maneuver to "Log Out".
    i

Maybe you are looking for

  • New details on same page won't insert

    Hi, I am not able to get a master-detail-on-same-page to work properly. It is created with a wizard. After adding the first row and entering data, the row is lost when clicking Apply Changes of the master. The row is not inserted in the database. Whe

  • Step-by-Step procedure to create an InfoPackage Group & a Scenario!!

    Hello BW Experts, IF we have 10 InfoPackages and if we need to create an InfoPackage Group for 7 of them, How do we do it?? Plz provide a detailed Step-by-Step procedure for the same/ create an InfoPackage group!! Ur help is really appreciated!! Than

  • The titles are not saved when i quit

    After quiting FCPX the titles i have made are not saved for next time i open a project. Some titles are saved sometime?

  • How do I import my (many) videos so iMovie separates them by the date they orig. were made?

    How do I import my (many) videos so iMovie separates them by the date they orig. were made? (Like iPhoto does with photos) But not one at a time! If that is not possible with IMovie, can iTunes do that? I want to import my videos from an external dri

  • Charts and Tables

    Can someone give a quick yea or nay ? Can I create a table with calculated values and have a chart built on that table ? All I can see in the help so far is copy and paste. Ta