Every time I connect my new iPad2 too my Sony laptop a pop up comes out saying " the iPad cannot be used because it requires iTunes version 10.5 or later. Can someone please help me!.
Every time I connect my new iPad2 too my Sony laptop a pop up comes out saying " the iPad cannot be used because it requires iTunes version 10.5 or later. Can someone please help me!.
Download and install the latest iTunes. Once you satisfy that requirement the warning will go away.
Similar Messages
-
I just bought an iPhone 5, and tried to sync it to my iTunes account but when connected it says: “...cannot be used because it requires iTunes version 10.7 or later.” However when I try to get iTunes to update it says: “This version of iTunes (10.6.3) is the current version.” Can anyone help?
filterc-r wrote:
Thanks for your reply. My Mac is running 10.5.8: it's 4 years old. When I try to update the OS software, I'm told there are none available.
Be careful - there's a difference between update and upgrade. Your machine is saying there are no updates available, meaning no later versions of OS X 10.5 (Leopard). However, you can very likely upgrade - at least to OS X 10.6 (Snow Leopard), and possibly then to OS X 10.8 (Mountain Lion).
Updates are free, but upgrades cost a bit. That's the dirference. -
My iPhone 4S will not sync to iTunes. I've download the newest version of iTunes several times but when plugging my phone in it says "The iPhone cannot be used because it requires iTunes version 10.6.3 or later." HELP!
If you're using Windows try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall the latest version of iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.
-
I cant' sync my ipod because it says"The iPod cannot be used because it requires iTunes version 10.6.3 or later. I can't download it because my MAC is version 10.5.8 and it won't accept the newer version of itunes. Any suggestions?
If you're using a fourth generation or earlier iPod touch, click here and download the software.
If you're using a fifth generation iPod touch and an Intel Mac, buy Mac OS X 10.6 from the online Apple Store and run Software Update.
If you're using a fifth generation iPod touch and a PowerPC Mac, buy a newer computer.
(73046) -
When connecting my iPhone I get the following message "The iPhone cannot be used because it requires iTunes version 10.1 or later. What does this mean? My computer has 10.4.
That's an issue with your system. Try removing the iTunes and the other APPLE software related from your system and reinstall it again.
Follow this if you're using XP: support.apple.com/kb/HT1925
Follow this if you're using VISTA/7: support.apple.com/kb/HT1923
Follow this if you are using a MAC 10.5.8 or later: support.apple.com/kb/HT1224 -
I've downloaded the latest iTunes so many times now, and tried uninstalling all all Apple software and deleted all the iTunes files on my computer and then redownloading it and it continues to give me that message.
I am at a loss of what to do now. This update has caused me nothing but ****. :/thats wat i got and now i cant get itunes back
-
when i connect my phone to itunes it saysThe iPhone cannot be used because it requires iTunes version 10.6.3 or later and i just downloaded the latest version
Julie, there seems to be some snafu with the updater, so go here https://support.apple.com/kb/DL1575 and get the download directly. That should do the trick.
Deb. -
Basically, I need to know how to update itunes on my iphone.
This error message is inforrming you that you need to upgrade the version of iTunes on your computer (Mac/PC) not the version running in the phone.
All the best,
Joe -
Hi,
My iphone 4 won't connect to my mac book, it says that I need to install to latest version of itunes 11.1. When I go to itunes and try to update, it says that I have the latest version (10.6.3). Can someone please help me!
thanksYou are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.
-
My new MacBook Retina cannot play any videos on any browser. This includes the Apple videos. It keeps saying Missing Plug-In. I am not sure what I am supposed to do. Can someone please help me out?
My iPod mini, 4gb is hard to get serviced obviously because they dont make them anymore
It is as simple to get it serviced as the day you purchased it.
How is it hard to get it serviced?
How long have you had your iPod?
i get maybe 4-5 hours of battery life, maybe even 6 if im lucky
That is not good but it's not "terrible".
If you've had it less than a year, send it back to Apple to replace the battery.
thought that i might buy an attachment type accesorie that i plug into the usb port on my ipod
It's called a dock connector, not a USB port.
i found a product in the online store, that i guess you place the ipod mini on, and it gives you up to 20 or so more hours of time but then it says that you have to have a firewire port or cable?
What is it? The firewire port is on the computer, not the iPod.
If the original battery is going bad, the first thing to do is get that sorted out. -
I accedentally switched my iTunes to the UK store and I don't know how to switch it back. Can someone please help?
Click here and follow the instructions to change the iTunes Store country.
(105976) -
i want to sync my ipod with itunes but it says the ipod cannot be used because the required software is not installed. run the itunes installer to remove itunes, the reinstall itunes again. i have done as instructed few times but still persists.
Success!
By completely removing all reference to apple or iTunes/iPod/ Safari etc from my computer, it has at last installed. -
Hi I recently upgraed to iOS 6.1 on my Iphone 5. After the upgrade, it was all good. Over the weekend I went Austria for Ski. While taking the photos, I simply locked the phone and kept it my pocket as I had to go. After sometime when I opened my phone, I could hardly see anything. I tried to unlock with pin and tried restarting with great difficulty. But nothing worked. Coming back home today, I have tried restore the software and still no luck. I have tried restore almost 5 to 6 times, but the screen is still blank. I dont know if what state it is in and I can not do anything to fix it. I am very annoyed with the support service as they can not be reached on Sunday evening.
I could manage to book a call tomorrow but I have lot of work over next few days at work. Can someone please help how to fix this issue now? Any suggestions will be much apperciated.
Thanks,
Srinisrinifromlondon wrote:
... Any suggestions will be much apperciated...
Try this Discussion
https://discussions.apple.com/message/19521062 -
Whenever I try to download apps, it says review account info. I click on review but then it won't load. Is there any way I can get around this or can someone please help me?
Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
so yesterday i updated to ios 8.0.2 and i lost all of my pictures and notes and whatnot and i dont think i have them saved on my icloud or anything , the pictures and notes were really important to me but i have no idea how to get them back . can someone please help me ?
Well, if you updated to 8.2, then you are living in a different world than the rest of us. 8.1 was just released on Monday.
Do you not have an iCloud or iTunes backup that you can restore to? Have you not been importing your photos to a photo library on your computer?
Maybe you could start from the beginning and we can see if we can help. If you had to restore your device, and you have absolutely no backups, then, I'm afraid you are out of luck. However, if you have backups, or if you have been importing your photos on a regular basis, then probably most of your stuff can be recovered.
GB
Maybe you are looking for
-
How to connect Macbook to HDTV
Hello Mac community, When i first bought my macbook back in late 2011 it came with OSX Lion already installed. I bought an hdmi cord and a thunderbolt attachment cord (idk what its actually called but the hdmi cord goes into the smaller one which in
-
Oracle Linux 6.6 w/ UEK3 boots to EL 2.6 kernel
I have just installed Oracle Linux 6.6 with the UEK3 kernel. Everything is up-to-date and the 3.8.13-68.el6uek.x86_64 kernel is set as the default boot kernel, but the machine always boots to 2.6.32-504.12.2.el6.x86_64, which is the specified crash k
-
HP DesignJet 500ps 42" Plotter keeps printing in repeat strips
Hi all, I have been trying to send photos to print on my DesignJet 500, it prints PDF's and larger drawings no problem but when I try a photo on canvas roll or ordinary paper, it prints the first 50mm or so and then does the same strip over and over
-
I installed rubygems and over gems I installed wxruby... then I wanted to run the first test project from here: http://wxruby.rubyforge.org/wiki/wiki.p - ng_Started well I added require "rubygems" to not to have add -rubygems parameter when trying to
-
XML C++ SDK Class Generator Question
Hello. I have an XML schema definition file where some elements are defined inside other elements. When I generate classes for this schema I don't get classes for such elements (but only for the outermost level elements). How to use the class generat