Every time I download an update I have to get the full 1.8Gb program!! Is it right?

Is it right? There must be something wrong!!
First it downloads the 300Mb upload, fails to upgrade and goes on to download the full monty!
With our British Telecome Victorian time telephone lines it takes all night and part of the day and it copes with all our internet access!
Any way to avoid it?
Thanks
PS with Final cut pro it's just the same!

That's how it works.  It's either that or wait 1-2 years for each upgrade on DVDs you play $500 for.

Similar Messages

  • Every time I try to update or install I get the following error: Installation Failed

    Download appears to be corrupted (-60)

    Bilfeva for information on how to resolve download error -60 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

  • TS1702 I have 8 apps that when I tried to update, are now stuck on "installing" in the box that says update. every time  I try to update another app, it gets frozen like this as well. I was able to quit all apps, but these, as they do not respond. Any ide

    I have 8 apps that, when I tried to update, are now stuck on "installing" in the box that says update. every time  I try to update another app, it gets frozen like this as well. I was able to quit all apps, but these, as they do not respond. Any ideas?

    Reset your iPad by holding the home and on/off buttons together for 6 or 7 seconds till the Apple logo appears.  Then update your apps one at a time.  Do not start the next app until the current one downloads and finishes installing.

  • Every time I click to update an application I get a window "Download Error" it gives me the option to "Contact customer support" and a link "Reload Applications"

    Every time I click to update an application I get a window "Download Error" it gives me the option to "Contact customer support" and a link "Reload Applications"

    Sal Sabaj, Would ask you to follow the suggestions mentioned under the below article and check if that helps.
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    Let us know in case you still get that issue.
    Regards
    ~ Arpit Kapoor

  • Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?

    Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?

    Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
    I suspect it's a iTunes extension perhaps?
    You also can use the manual method of Finder > Go > Computer and opening your drive, then your  System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
    How to uninstall/install software on your Mac
    The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be.

  • I only get 30 seconds of show after downloading from iTunes. how do i get the full episodes?

    i only get 30 seconds of show after downloading from iTunes. how do i get the full episodes?

    Are you sure to have the full length file in the library? If you start playing it, will it show the full runtime on the controls?

  • HT1725 I downloaded an album and all of the tracks will play about 3/4 of the song then stop and play the next song.  I went to itunes store and it said the songs fully downloaded. So how do I get the full song into my library?

    I downloaded an album and all of the tracks will play about 3/4 of the song then stop and play the next song.  I went to itunes store and it said the songs fully downloaded. So how do I get the full song into my library?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Every time I try to update adobe reader I get error message stating failed

    Every time I try to update adobe reader error message states trying to update to G:. How can I correct this?

    What is your operating system?
    What is the full and exact error message you're getting; post a screenshot if you don't want to type it all.

  • Every time I log on to i tunes I get the Prompt.  Can it be bypassed?

    Hello again.  Thanks again for the help with my earlier catastrophe.  I am quite comfortable with the old sofware/app/operating system/version, sorry I do not know the correct term.  However, every time I log into I Tunes now, I get blocked form doing anything unless I agree to download the newest version.  After losing my library for 15 hours and dubiously trying to recover it on my own, you all came to the rescue.  I have a lap top running windows 8 and this old desktop running windows 7.  With me not knowing which of the two accounts is assigned to this desk top, I do not wish to lose my content again.  Even if authorizing two users will solve the prob.  Is there a way to just keep the old version and bypass the download new version now screen?  Call me Old Fashioned.:)

    Open the Options dialog and go to the General tab.
    Check the setting "When Firefox Starts:" and make sure it is set to "Show my home page"

  • Ever Since I upgraded to Mountian lion 10.8.2 I have been getting the spininng wheel on programs more than ever ..Anyone know of a fix ?

    I use firefox and since i HAVE UPGRADED to 10.8.2 I have been getting the spinning wheel more than ever. I have to force quit browser to have it stop . It's very annoying and I have talked to a few other's that are having this same problem. It's getting very annoying and need to do something about it. I have used OnyX to clean up my Mac, but that doesn't seem to help at all.  Has anyone else here been experiencing these issues .. Firefox. Skype etc ....

    I use firefox and since i HAVE UPGRADED to 10.8.2 I have been getting the spinning wheel more than ever. I have to force quit browser to have it stop . It's very annoying and I have talked to a few other's that are having this same problem. It's getting very annoying and need to do something about it. I have used OnyX to clean up my Mac, but that doesn't seem to help at all.  Has anyone else here been experiencing these issues .. Firefox. Skype etc ....

  • I have a new iPhone 4 and every time I plug it into my laptop I get the "blue screen of death", it didn't do this the first time because I downloaded all my music from iTunes but ever since it has done this.  Anybody have any insight?

    I have an iPhone 4 and downloaded all my iTunes music to it.  Now when I connect it to my laptop I automatically get the "blue screen of death", does anyone have any insight into this problem?

    This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

  • If I try to download a word file every time it downloads it as DisplayMessage.aspx instead of the file. How do I sort it out?

    Every word or excel file I try to download from an e mail instead of getting the file name.doc or xlsx, I get the downloaded file address - DisplayMessage.aspx which is just a blank webpage. It doesn't matter which version of word or excel is used and it happens with every download. Basically I cannot download any files in Firefox but in my ISP which is AOL - there is no problem at all with downloading the files from the same e mails.

    Thanks for getting back to me. Basically I get an e mail on AOL mail and until now no problem - I right click and the option I get then is 'save page as' so that brings up a list of my word or excel files - the 'save as' option box - so you normally get the word or excel file address appearing in the top box and the file extension in the bottom box just as if you were opening a file in word or excel. I've done it thousands of times but it no longer works in Firefox. However if I log directly into AOL and say download and again up comes the excel or word files and no problem - only on Firefox is there an issue and it seems to be since the last update - on both my desktop and laptop

  • Since the last iphone update i have been getting the message cannot connect to itunes store when i try to download any application. How do i resolve this?

    Since the last iphone software upgrade, every time i try to download an application i keep getting the message "cannot connect ot itunes store". How can i resolve this? I have tried rebooting but that didnt work.

    Try logging out of your account on the iPhone by tapping on your id in Settings > Store and then log back in and see if it then works.
    If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months (or maybe a year or two) in the future and then re-trying

  • I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

    I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
    Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
    I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
    I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
    I was taken through msconfigure and adjusted the startup tab but still no joy.
    In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
    Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
    The 1st message is;
    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application  Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    When I click ok the next message that appears sometime later during the install is;
    Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
    The options I have are to abort, retry or ignore. If I retry the same message comes back and if I  abort or ignore the download continues and I then get the following message:
    'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
    After attempting to reinstall itunes only some components were installed however itunes would not open.
    It would appear many people have experienced problems with this latest download!

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Every time I try to open a project, I get the error that the file is corrupt

    Every time I open a file, even an empty file everything workseat, but when I decide to save it and open it, Premiere Pro shows the following message:
    "File could not be opened because the file is corrupt"
    It does not matter what type of file I create, it could even be an empty project and it does not open. The weird thing is that if I save the file under a USB, it opens it without showing any errors.
    Any help is appreciated.
    Thanks.

    OK, so image being shown is this one:

Maybe you are looking for

  • How to send file as attachment in Email in Oracle UCM

    Hi All, I have created a simple html form which executes my custom service( internally calls java method) to send a email "forms data" to the user. I need to send file as attchment in email so how i can do it in oracle ucm.Currently i am using intrad

  • How do I convert a pdf document into word?

    I've scanned documents and saved them as pdf into my email. I now need to convert them to word and I have no idea what I am doing. 

  • Pdf conversion from a non unicode system to a unicode system

    Hi, I have a BSP application that runs on a unicode system which retrieves data to be output in pdf from a non unicode sap system. We get the data from the non unicode system through a RFC call and store data in table otfdata type itcoo, then we perf

  • Itunes says that i didn't buy a song WHEN I DID! Help plz

    How come when I am looking through my library, I have the song but it says find it (I don't because I cleaned my pc anyway) so then i go to re-download it and it says i never bought the song WHEN I DID!!! And it's not just one song it's a bunch of th

  • [SOLVED]Cannot run own program since last update : malloc.c:3096 error

    Hi all, It seems that due to a recent update a program that I am working on doesn't run any more. It doesn't rely on any external libraries and compiles fine, but when it gets to a : "pointer = new class_object[4096];" it crashes with the error: mall