Every time I print the file reduces to the size of a postage stamp on paper

I am running Adobe Acrobat Professional 9 on my computer, and every time I try to print a PDF, the contents of the file print in approximately a 1" by 1" square that looks like a postage stamp on the corner of the paper.  I haven't changed any print settings from their defaults since installing the software.
It doesn't matter if I make the file myself or if it is a previously made PDF.  Additionally, all of the files print correctly from other computers.  How can I correct this problem?

Here is the Print UI from Acorbat Pro version 8.1.1:

Similar Messages

  • Crystal Reports on MS Terminal Server printing the size of a postage stamp

    Post Author: phil
    CA Forum: General
    When I print off reports from our accounting system to an HP 1022 Printer which is installed on my workstation from a MS Terminal Server it prints the entire document the size of a postage stamp?
    We are using the Crystal 9 print engine. If I send reports to an old HP DeskJet printer, the reports print fine. If I print the built in reports from the accounts system they also print fine.
    Any one seen this before?

    Post Author: V361
    CA Forum: General
    You could try, adding another printer, but instead of using the native HP 1022 Printer , use the drivers from the old printer (the one that is working)  for example, go to (this is Win XP version)
    Start, Printers, select the printer, right click, select properties, click on the advanced tab, select a different driver.  Many of the newer printers will still support older printer drivers.  If that fails, you may need to check the amount of memory the 1022 has. Also, does the printer support downloadable fonts ?

  • Websites shrink on the laptop screen to the size of a postage stamp

    Websites shrink to the size of a stamp and you can't read them . You can make them bigger by touching the screen and widening the website but when you go to a new website it comes up small again.

    Hi,
    Please use the max symbol (touch to it) which is on the top right corner, next to the close (X) symbol.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • PDF's printing the size of postage stamp

    Recently when I try to print a pdf from any program on any printer, an 8.5X11 document will print the size of a postage stamp in the upper right or left hand corner. Settings in printer drivers look fine and print preview looks fine, but actual print is very, very tiny. This has been happening for the last 3 weeks, but pdf's were printing properly before this. I have not made any changes to my computer or to either of our 2 printers. One other person in our office is having problems with this, but everyone else is printing pdf's just fine. Could there have been an issue with an update?

    Adobe Reader X; printer driver shows document size as 8.5X11 and the print preview appears to fill the 8.5X11 space. Document and paper size both set at 8.5X11. Also verify portrait/landscape is set properly - print 100% - print actual size - choose paper source by pdf page size - output size same as original size - uncheck shrink to fit...

  • "The Pure Networks Platform Service Is Not Running" every time I print

    I will be glad to follow-up with all the gory details about my system, but I thought I'd throw out a general question first.  I just installed a network printer to my NM Network.  It's a Lexmark 543dn connected via ethernet.  Everything prints just fine, the Map shows it as a Network Printer,etc..
    The only problem is that every time I print, the Platform Service stops running and I get a general Windows Error message asking whether I want to "report" the error.  You know the one...you have to click SEND or DO NOT SEND.   The Platform can be easily restarted without problems.  Is this a common problem..with hopefully a common solution?
    FWIW, it becomes a pain when the kids have to come fetch me when the error message comes up; they think they did something wrong.   Plus, if I'm not mistaken they need to restart the platform service if they want to continue printing to the sole color laser in the house.

    Hi, we do need the info in the sticky topic so we can see what your hardware and software is.  Not all crashes happen on all systems.
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • My printer keeps printing out a file summary page every time I print something?!

    HP Photosmart Plus B210- Every time I print anything, the printer spits out a summary page of the file I'm printing...wasting paper and ink!  How do I get it to stop?!  I've already re-installed the software and that didn't work...

    Hi,
    Are you printing from Word ? If Yes, please try this:
    Click the 'Office Button' (top-left corner of the window) then 'Print'
    Click 'Options' (bottom-left corner of the print window)
    Choose the 'Display' section
    Untick 'Print document properties'
    Click OK to all the windows and you're done
    Regards.
    Source: http://www.wayne-robinson.com/journal/2008/1/24/stop-printing-document-properties-summary-page-in-wo...
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I save to the same map every time when printing pdfs?

    How can I save to the same map every time when printing pdfs?
    Finder points to the document map even when I chose a different map recently.
    I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

    that link seems to be broken right now:
    403 Error - Forbidden  - No cred, dude.

  • Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Is it a USB hard drive?  USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice.  Double check your profiler to make sure that is not a problem.  If it is Firewire, make sure there aren't other firewire devices in use at the same time.  I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

  • I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other ap

    I am trying to use the trial creative cloud software on a PC windows 8.1 - I've downloaded and removed Photoshop CC 2014 two times - every time I open the file it says there is a problem and it shuts down and closes. I can open indesign and maybe other apps but photoshop no. Any ideas?

    I don't think I can access the crash report? Excuse the ignorant questions I'm about to make am a relative tech novice.
    Soo - as mentioned every time I open photoshop it crashes - it just says there's an error and the program will shut down and if there's a solution windows will notify me. Then nothing...
    I've tried to look in photoshop files for the detailed crash report & the system event viewer but cannot find a file with those names. I've also looked in the windows files for files with those names but cannot find them either - so I don't know where to look.
    Any guidance would be great.

  • Every time I save a file it copies it to the desk top as well.

    Every time I save a file to either the internal drive or an external drive, it also saves it to my desk top...must be a preference somewhere to turn off but I can't find it.

    Nope, something is malfunctioning, but we can reset it all easily.
    Download the free OnyX and run ALL the initial checks, cleaning and maintenance aspects (except deleting the log files) and reboot at the end. (cancel in between reboots is fine).
    http://www.titanium.free.fr/
    Your machine will act a bit slow upon reboot until the caches and spotlight are rebuilt, but things should be straightened out.
    If you get any drive warnings, make sure you immediately backup your files off the computer to another drive as soon as possible, return for further instructions.
    https://discussions.apple.com/message/16276201#16276201

  • I have macbook pro running on 10.9.2 every time i download music files and transfare the it duplicates the file is there any way off switching it off please help

    i have macbook pro running on 10.9.2 every time i download music files and transfare the it duplicates the file is there any way off switching it off please help

    Open Automator
    Choose Folder Action for type of document
    At the top, for Folder action receives files and folders added to, select Other...
    in the window that opens, select your Downloads folder, and then Choose
    from the Actions on the left, drag Filter Finder Items over to the column on the right
    Where it says Any Content, select Kind
    Where it says Any, select music
    Drag Move Finder Items over to the rightfor To: select other, and navigate to your user folder > Music > iTunes > iTunes Media > Automatically Add to iTunes
    it should look like this:
    close the window and give the folder action a name.

  • Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign.  Please advise how to correct the name that it is saved under.

    Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign.  Please advise how to correct the name that it is saved under.

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
    Apple ID FAQs
    http://support.apple.com/kb/HE37

  • I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

    I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

    Hi mjsa1,
    Please see Error "The Organizer Database is damaged and will be reset..." | Acrobat 9.
    If you're still having trouble, please let us know!
    Best,
    Sara

  • Is it normal that the flash Memory (storage) rises every time I open a File or boot a program?? I just bought a Mac Book Pro 15"

    My computer has 500 GB of capacity, but I have seen that every time I open a file or boot something the memory used rises a little. Is this normal? It is the first time that I have seen. 

    I think that you have concerns that do not warrant much attention.  These two images were made at the same time and note the differences (in red):
    (These minor differences can be attributed to background processing by the OSX which you should not obsess about.)
    francaball wrote:
    Is it normal to have 499,42 and have a disc of 500,28
    Yes.  See mine in purple and how it compares to the red.
    Ciao.

  • Every time I compress a file over 1.5 Gigs it ends up corrupt any idea what the cause is?

    Every time I compress a file over 1.5 Gigs it ends up corrupt any idea what the cause is?

    Compression depends on repetativeness of characters within the file.  If it can't map those, it won't compress.   Images and programs are much harder to compress for that reason, as they both are basically binary constructs.  Some image software compresses looking at common lines and points of the same color.   Audio files look for the same frequency. Most video formats are already compressed to some extent except full DV.
    And files with DRM get even more dicy, since you really can't bypass the DRM which itself is binary code, not to mention not allowed to be copied.   This forum can't discuss such issues due to the DMCA rules.  As long as it isn't copyright, what are you trying to compress?

Maybe you are looking for

  • Table in which if I put the delivery number ..I should get the HEADER TEXT

    Dear Members, I am checking for a table in which if I put the delivery number ..I should get the HEADER TEXT. Does such table exists or a Z report shoudl be created for this kind of setup. Regards,

  • Group and group counter used to create cost estimate

    I am creating a custom report and would like to know what table do I have to use if for a given material  the program has to pick Group, Group counter and the task list type that were used in creating the cost estimate for that material. Any help in

  • How do I convert an image file into an array?

    I am using LabVIEW v.6.0.2 I have no NI IMAQ device or IMAQ card, also no Vision The image file I have can be saved as a file containing numbers relating to the picels. I want to put these numbers into an array and plot a cross section intensity char

  • Changing OBIEE message

    hi experts, we are using OBIEE 10g,whenever a user is entering wrong UID & PASSWORD while login in OBIEE,they are getting the following default OBIEE message Unable to Log In An invalid User Name or Password was entered." is there any way we can cust

  • Does any one know how to clean smart cover surface?

    I have a polyurethane cover. It's light green color, but since I've been using it since long time it's gone on to become dirty and s got stains on it. Ho do I clean it now? I m afraid to use water... Any solutions?