Every time I quit Safari it restarts automatically. I want it to stop!

How can I stop this as when I forget it does it or someone else uses the computer and shuts it down I lose all the tabs that are open and I can't reopen them automatically when I log on next.

System Preferences > General
Uncheck the box beside “Close windows when quitting an app”.

Similar Messages

Every time I quit safari I lose all my history and my Favorites.

When I quit Safari I lose my history and my favorites. I do not know how to change this so I'll always have my favorites and my history and they won't disappear.
It is really annoying because if I add something to my favorites I'll lose it next time. Please Help me.

What is your Mac OS version?

On our iMac, we keep getting the message "safari has quit unexpectedly." It used to happen occasionally, now it's almost every time we start Safari. Help!

on our iMac, we keep getting the message "safari has quit unexpectedly." It used to happen occasionally, now it's almost every time we start Safari. Help!

Can you post a copy of the crash report?
Go to your Applications Folder and open your Utilities Folder. Open the application Console.
In the left-hand column, click on Crash Reporter.
Click on the small triangle under Crash Reporter in the l/h column and they will all be listed.
Scroll down to the latest Safari report and click on it.
Now click on the r/h column (which now only shows THAT crash report and then Command-a to copy it all.
Come back here and Command-v it to post it here!

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

The app store opens every time I open safari

The app store opens automaticly every time I open safari. How can I stop this from happening?

From your Safari menu bar click Safari > Reset Safari
Select Clear History
Deselect all the other boxes.
Click Reset. Quit then relaunch Safari to test.

Every time I reset Safari, I have to re-sign into the iTunes and App stores. Related or coincidence?

It seems that every time I reset Safari, I have to reestablish credentials with the App and iTunes Store. Are there cache or web site data files that are common to all three of those applications?
Currently using Safari 7 with OS 10.9.

Thanks, Bee. I reset my browsers on quitting as a matter of course, Most other browsers allow this in a preference setting, but I have a macro for Safari which resets it before quitting. I've noted that the problem is not Safari's alone -- any cache cleaner, like NetShred -- seems to have the same effect. I suppose I was questioning the linkage, though. I would have thought that store credentials would be treated differently than browser cookies and cache files. The cleaners I've used so far allow you to add disparate files to the cleaning routine. I haven't yet found one that allows you to say, "Don't touch that one..." I'll keep looking.
Thanks for the help, Bee.

My PowerBook g4 says it's connected to the Internet and the Ethernet cable's plugged in, but every time I open Safari it says I'm not connected. What can I do to get Safari to get online?

My PowerBook g4 says it's connected to the Internet and the Ethernet cable's plugged in, but every time I open Safari it says I'm not connected. What can I do to get Safari to get online?
Also I'm having problems with my PowerBook G4 on recognizing my HP Photosmart C4680 All-In-One Printer/Scanner/Photocopier. This is connect via USB printer cable, but yet they're not syncing. How can this be resolved?

Internet Quick Assist:
http://support.apple.com/kb/HT1144?viewlocale=en_US
Troubleshooting internet settings:
http://support.apple.com/kb/HT1714?viewlocale=en_US
As for the printer problem, is this a new problem?
Try an SMU reset:
http://support.apple.com/kb/HT1939?viewlocale=en_US
http://support.apple.com/kb/HT1436
Then repair permissions and restart.

Every time I open safari, my finder opens macintosh hd

im new to macs so i am sorry if this is a stupid question.
every time i open safari, or even open a new page, macintosh hd opens in the finder and the page doesn't load. it will load if i type in an address or click a shortcut but not on its own like before. i dont know what happened. i wiped the keyboard( to dust it) and dint realize it was still on. i thought maybe i somehow set up an automator workflow but i cant figure it out. this is really annoying me. thanks to anyone who can help.

Hi deelahn
the only thing I can think of is that somehow your Homepage got set to file:///volumes/Macintosh HD
In Safari - click the Safari menu & choose 'Preferences', then the 'general' tab.
What is your homepage set to there?
even if not shown as Macintosh HD, try changing the page to something else, then restarting Safari.
iMac G5 rev B (OSX 10.4.9) 2GB 250GB

Please respond. InDesign CC crashes every time I quit. I'm on Windows 7. (edit)

InDesign CC crashes every time I quit. Prefs are not saved. I'm on Windows 7. I've rebuilt the prefs several times. Crash on quit happens on InD CC 64 and InD CC. In Windows, Batang is part of a "collection"; Batang, BatangChe, Gungsuh, and GungsuhChe and is a system protected font. Hard to remove. Is Batang the problem on Windows as well as Mac?
Edit: I have not uninstalled CS6, so I'm running both versions. I doubt that this could make any difference, but who knows.

yes. I am having this problem and I think it is both ABSURD and RIDICULOUS because Adobe CS6 works fine.
dont screw with anything here.
go HERE instead IT WORKS
http://forums.adobe.com/thread/1234968
This is an ADOBE problem not testing their software properly before release.
Font folder? Replace number of active fonts? CMON, act like its the fonts... absurd.
My fonts worked fine in CS6
http://helpx.adobe.com/x-productkb/global/reduce-number-active-fonts-windows.html
I have been using Adobe software since 2002 and this is typical. I have had a DECADE, yes, 10 years of patching, reinstalling, re-starting, removing things, running obscure command line scripts, Adobe blaming windows, windows ignoring adobe, Apple acting like they dont know, Adobe doing the same.
As a WARNING to anyone still using CS6, my opinion: "dont uptate YET" cause Adobe made it disgustingly difficult to roll back to CS6.
system restore is your friend...
yes, I am cranky. Last thing I need is the 3 hour game of grab bag forum hockey download this and jump through this hoop cause we forced you to update with no rollback. *sigh*
Spoken in the voice orf Chris Farley: "someone, please, stop the terror, stop the insanity, stop the constant updates. set a standard for the love of god"

InDesign CC crashes every time I quit. I'm on Windows 7.

InDesign CC crashes every time I quit. I'm on Windows 7. I've rebuilt the prefs twice. On Windows, Batang is part of a "collection"; Batang, BatangChe, Gungsuh, and GungsuhChe. Is Batang the problem on Windows as well as Mac?

yes. I am having this problem and I think it is both ABSURD and RIDICULOUS because Adobe CS6 works fine.
dont screw with anything here.
go HERE instead IT WORKS
http://forums.adobe.com/thread/1234968
This is an ADOBE problem not testing their software properly before release.
Font folder? Replace number of active fonts? CMON, act like its the fonts... absurd.
My fonts worked fine in CS6
http://helpx.adobe.com/x-productkb/global/reduce-number-active-fonts-windows.html
I have been using Adobe software since 2002 and this is typical. I have had a DECADE, yes, 10 years of patching, reinstalling, re-starting, removing things, running obscure command line scripts, Adobe blaming windows, windows ignoring adobe, Apple acting like they dont know, Adobe doing the same.
As a WARNING to anyone still using CS6, my opinion: "dont uptate YET" cause Adobe made it disgustingly difficult to roll back to CS6.
system restore is your friend...
yes, I am cranky. Last thing I need is the 3 hour game of grab bag forum hockey download this and jump through this hoop cause we forced you to update with no rollback. *sigh*
Spoken in the voice orf Chris Farley: "someone, please, stop the terror, stop the insanity, stop the constant updates. set a standard for the love of god"

I am trying to link slides, a specific slides to specific lines. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10

I am trying to link slides, a specific slide to a specific slide. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10; any ideas why? Thanks

create a shape on the slide e.g. a circle
right click the shape and select Add Link
make sure you select a specific slide number (don't select first previous or next)

HT2242 How do I change my country in my apple account? Every time I sign in, the system automatically sends me back to the store my account is currently based in and I am unable to change this. I keep going in circles.

How do I change my country in my apple account? Every time I sign in, the system automatically sends me back to the store my account is currently based in and I am unable to change this. I keep going in circles.

No, What I mean is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA.
I already change my address and select USA but still I can not download app for USA

Elements 9.0.3 for Mac crashes every time I quit program

I receive an error every time I quit PSE. I always do File->Quit to leave the program, but even that causes a crash. I have the crash file, but because of its length I don't want to post that here, but it might help someone understand the problem. I always get the window that asks me if I want to send a report to Adobe, which I've done several times. I don't want to do an update to PSE 10 or 11, since I'm afraid it would just update an already corrupted program and leave me no better than I am now.
I'm using Lion, version 10.7.5.
Any help would be appreciated.

So, if I understand you correctly, it's not really crashing, just throwing out the crash message when you tell it to quit?
Try this. Go to your username>library>preferences and delete:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 9 paths
Adobe Photoshop Elements 9 settings
That library is hidden in 10.7. To see it, option-click the Go menu in the Finder. While you're in there, go to the Saved Application States folder and delete everything related to PSE.
Repair permissions and try again.

Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up?

Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up? It's brand new, so I don't understand why it would be doing this?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Premiere Pro "quit unexpectedly" message every time I quit

There are three editors working on the latest version of Premiere. Two of us are working on the newest iMacs and one on a Mac Pro. Every time I quit Premiere on any of the computers I get a message saying that it "quite unexpectedly". It hasn't caused any noticeable problems with the projects, but I'm not doing anything funky. After I save a the project I hit "command Q". The project closes and then I wait about 10 seconds and the message comes up. Sure enough the app is still present in the dock below with the little light indicating that it's still on, but once I close the "quit unexpectedly" message, the app leaves the dock.
Like I said. I haven't noticed anything awry with the project/computer/drives, but I'm concerned that it might cause a problem. Plus it just shouldn't be happening.
Anyone else with this problem?

I am having the same issue, with all of my CC apps.
Running on a month-old MacPro 6-core, dual ATI D700s, 32 GB RAM (OWC-brand). Working off an OWC ThunderBay IV configured with 4 2TB Toshiba enterprise drives.
I'll work for hours, then quit, only to be told the program "quit unexpectedly."
I did have AfterEffects crash on me once, and Premiere as well once (if I remember correctly), but I assumed both of those were normal minor hiccups for a month of work.

Every time I quit Safari it restarts automatically. I want it to stop!

Similar Messages

Maybe you are looking for