Every time I start Mail, I get asked my account passwords

How do I stop this from happening? I always check the box - remember password in my keychain- but nothing.
thanks

Go To Spotlight (of Finder find) type in Keychain. Open the application. Click on Passwords. Double click on each Name. Click on Access Control. There is a small box that says Ask for Keychain Password. Do this for each name and uncheck the box if it is checked.
You should then quit Mail and Safari and reopen them.
Hope this helps.
--Jerry

Similar Messages

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Using DW CC... Win 7 : Every time I start DW, I get message telling me to 'switch to" or retry.

Its more of an annoyance than a problem. I'm using Windows 7 Professional on an Intel i7 950 with 16 Gbytes of RAM and a Gforce graphics card with 3072 MBytes of RAM. I'm using the full suite of CC apps.
Every time I start DW I get this error message to "switch to" or retry before it will start. It's got something to do with a browser (I've got 3) but only Chrome has any Adobe related add ons. I recall some time many years ago I got the same message starting Corel Draw or Photo Paint. Come to think of it, that was the reason I moved to Adobe in the first place.
Any help will be gratefully accepted.

Well... Yes and no to fixing it.
I followed that link's instruction — altered for Dreamweaver and yes, it lit up cleanly as administrator but before ever it reached 'booted' stage it warned me I had 00 days of trial left and needed I to register it. OK I'm a paid up renter. I fed it my username and it finished booting only to tell me again, I had 00 days of trial left and needed to register it. I knew where this was leading before ever I entered my email and password for the second time but let it happen anyway.
Then I decided I'd continue with the instructions, log out of DW and re-start it normally. Opps! This application has already been registered on two other machines. CC Manager at it again. Another hour wasted fixing CC dramas. I rebooted the PC without any external drives connected, just the 4 internal drives. OK... Lets start DW and see what happens. I'll tell you firstly that I installed DW on this machine 6 months ago and promptly removed it. Why? Because I get quicker results using notepad++ and I needed to get a job done in a hurry. No time to try and get my head around Dreamweaver in the process.
Honestly speaking I didn't 'cancel' that installation. I didn't realize this antique process still existed. Anyway... I reinstalled it last month with some time now to 'get my head around it'. CC doesn't speak my language and hasn't yet learned that when you tell it to remove a program, it needs to remove the registration of it too! So I got the 00 days trial left garbage again. Only difference this time it told me both the original install and second install (on the same machine) were still registered but luckily (I won't say for who) There was an option to cancel all other installations. and yes... It loaded cleanly and faster than I can recall it ever had previously. Will it keep doing this? Is this mess going to happen ever few months?
I'm prepared to believe CC's shocking uninstall is to blame. At the best of times it is a messy process, leaving registry entries and files scattered all over my drives. NOT very nice for such a complex program manager. I used to be able to keep it under control with Revo but now CC manager wants to do it all I think it needs a bib or diaper to stop messing up my computer. If this happens again now that I've killed (renamed actually) the folders in the instructions to fix lightroom doing the same thing... I'll lodge a critical error ticket.
Incidentally... How come searching for this solution didn't show up the answer you pointed me to? Is the forum search bot flaky too?

Every time I start iTunes I get a missing CD/DVD software error.

Installed new CD/DVD burning software and now every time I start iTunes I get a missing CD/DVD software error. I've repaired iTunes twice.

Try removing and reinstalling all the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I upgraded to 9.0.1 and every time I start Firfox I get the welcome screen and checking add on compatability Why?

I upgraded to 9.0.1 and every time I start Firfox I get the welcome screen and checking add on compatability Why? How can I just start with my homepage and not be welcomed every time I start Firefox?

See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

Every time I start Logic Express it asks me for my serial number. What do I do????

Like I said in the header,
Every time I start Logic Express 9.1.3 it asks me for my serial number. What do I do????
I have a MacBook Pro MacOS 10.6.7.
Erik

It looks like I delete the ProAppsSystemID... I'll try it, thanks Erik!
LOL!
I could use a verification - just in case I forgot something.
Erik

Why is that every time I start my computer it asks for my Yahoo email password? How can I fix this?

The computer keeps asking for my password for Yahoo. I already gave it but it asks over and over. This happens every time I start using the computer.

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

After the 5.0 upgrade, why is it every time I start Firefox I get the welcome to 5.0 web page you are up to date? Plus My home page opens at the same time.. Its annoying.I can not stop it.

I turned off auto upgrades I defaulted my home page I made a blank home page I cannot get rid of the double page on the initial start up of the browser.

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

For some reason every time I start Firefox I get a window to print the current page. Am I the only one this happens to? Is there any way to get rid of it? It just started with the previous update.

When I start Firefox, the standard print window comes up as if I had clicked on print under the file menu. I close the window without problems, and it doesn't show up again until the next time I start Firefox. When I click on print under the file menu, I get the print window without any problems.

See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then easiest is to download the full version and uninstall the currently installed version and remove the Firefox program folder to do a clean install of the new version.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

After the 5.0 upgrade, why is it every time I start Firefox I get the welcome to 5.0 web page? Plus My home page opens. Its annoying.

After the 5.0 upgrade I cannot get rid of the welcome to firefox 5.0 home page on the browser start up. It has happened in the past with other upgrades but goes away after the first initial run. Any help on this?

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Every time I upgrade an app it asks for a password

on my iPad and iPhone if I upgrade apps it asks for a password for every app. It used to just ask one time but now I have to add the password for every app upgrade.

If you have it set on 'immediately' and choose the option to 'update all' you'll only have to enter it once per session....as in if I have 3 apps to update, I can update all, enter my password once and it'll work for all 3 apps I need to update.
Do the same thing the next day and I'll have to re-enter the password the next day/session

Every time I start up, I get a flag that tells me my start up disk is full. How do I empty this?

Both my start up disk and my hard drive apparently are full. My main concern is that I can no longer download anything because it says my drive is full and there is not enough room left. How can I get rid of the "Stuff" that is plugging up my computer?

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Every time I start Firefox I get : JavaScript Application TypeError: Components.classes[cid] is undefined. What causes this and how do I fix it?

This happens also when I open another tab that requires printing.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Get a 'Server Busy' message pretty much every time I start Lightroom

This is my Lightroom setup - pretty much every time I start Lightroom, I get the screen below;
Lightroom version: 5.7.1 [994254]
License type: Creative Cloud
Operating system: Windows 7 Business Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 8
Processor speed: 2.9 GHz
Built-in memory: 7127.1 MB
Real memory available to Lightroom: 7127.1 MB
Real memory used by Lightroom: 639.7 MB (8.9%)
Virtual memory used by Lightroom: 608.8 MB
Memory cache size: 86.3 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1440x900, 2) 1280x1024
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7.1
Library Path: C:\Users\Desktop\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
Settings Folder: C:\Users\Desktop\AppData\Roaming\Adobe\Lightroom
Installed Plugins:
1) Flickr
2) HDR Efex Pro 2
3) Nikon Tether Plugin
4) Perfect Effects 8
Config.lua flags: None
Adapter #1: Vendor : 10de
    Device : dc4
    Subsystem : 23601462
    Revision : a1
    Video Memory : 977
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 3524
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: NVIDIA GeForce GTS 450
ShaderModel: 11.1
Vendor: Nvidia
VendorID: 4318
Version: 10de:0dc4:23601462:00a1
What does this mean and how can it be stopped?

No reply? No fix? I have the same annoying issue and its persistent. I has rendered LR totally unusable. WTF is going on? Force quit --> Re-open --> Same error --> Force quit --> etc.

How do I cancell Read / Dismiss every time I open mail window

Every time I open Mail I get a pop-up asking me to decide Read or Dismiss for every new email. this pop-up locks me out of being to do anything at all on the ipad until I have decided for every email

Try Settings>Notification Center>Mail>Your Email Account>Alert Style>None.

Every time I start Mail, I get asked my account passwords

Similar Messages

Maybe you are looking for