Every time I start my Macbook it goes straight back to the login screen

Every time I start my Macbook it goes straight back to the login screen does anyon eknow what to do? I have already gone into safe mode and checked the start up folder was emty. I have pressed the shift key as well to do something suggested to me, but to no avail. Can anyone help please?

What version of Mac OS X is on the computer?
Try booting with the Option key held down. Do you see any icons of hard drives?

Similar Messages

  • HT201272 insalled tap pet hotel it half loads then goes straight back to the home screen can any body help

    can anyone help my daughter downloaded and installed tap pet hotel it half loads then goes straight back to the home screen.

    Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

  • Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts

    Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts. It has only been over the last week or so I also found Safari will not load up and tyou have too open then shut from the drop down then restart it to get a page, any help pleas?

    Do this:
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall
         Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Every time I started my Imac, loks like If It is the sistem downloading again, with yhe white screen, the apple and the filling up bar. Its that normal???

    Every time I started my Imac, loks like If It is the sistem downloading again, with yhe white screen, the apple and the filling up bar. Its that normal???

    It is for Yosemite. Not for Mavericks or earlier.
    OS X Mavericks- If your computer stops or delays while starting up with progress bar

  • I have OSX 10.5.7 on my Intel Mac. When I try to login using the correct password the screen goes white and just returns back to the login screen. It does not jiggle like when you enter the wrong password.

    I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,

    Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
    The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
    Briefly, you need to delete the following file:
    /var/audit/current
    If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
    Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
    When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
    mount -uw /
    You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
    Next, type the following command:
    rm -i /var/audit/current
    Press return. You should get the following output:
    remove /var/audit/current?
    If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
    Finally, enter the command:
    exit
    Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
    Credit for this solution to ASC user AnthonyTW.

  • After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

    After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
    By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My iPad is completely frozen, stuck on a app, the only button I can click is the sleep button but when I open it back up it goes straight back into the app how can I unfreeze my ipad

    My iPad is completely frozen up, and I don't know what happened, or how to unfreeze it
    I can click the home and sleep button, but the home button does nothing, and the sleep button works but when I touch it again, it goes straight back to the app I was in,
    Can someone please help me?

    A reset should help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • My MacBook Pro is now asking for a login. When I enter my passcode, it goes to a blue screen and back to the login screen. I saw several older posts, but nothing recently. I am running Snow Leopard.

    My MacBook is now asking for a password. When I login, it loops to a blue screen, and back to the login. Incorrect logins create a shaking of the login screen. I tried restarting with the shift key depressed, with no luck.

    I performed a hard shutdown, and upon start I could access my system without logging on. I'm not sure what caused the issue, but I have not booted up in almost a week.

  • Is it possible to add a timer for inactivity in a folio? Go back to the home screen in folio?

    I would like to be able to add a timer on folio pages that will go back to the home screen if iPad left inactive. Any ideas on how to make this happen in InDesign CC?

    There isn't a way to do this with DPS.
    Neil

  • Has anyone had problems with unable to rent movies from apple tv? I can watch movies on Netflix fine but when I click on the Movies Icon it acts like it's about to show the movie selections then it goes right back to the home screen!! Please help!!

    I can watch Netflix fine from Apple tv but when I click onto the Movie Icon it acts as if it's about to show the movie rental selection then goes back to the home screen. Please help!

    My problem was solved by Winston Churchill. Step #2

  • After shutdown I have to log in twice.  The first time it starts to load, then goes black, then gives me login page again.  Do you think I have a virus?  Or is this Yosemite bug?

    Just updated to Yosemite on my MBP.  After shutdown now when I login, it starts the process (the bar starts to move), then the screen goes black, then it asks me to login again and this time it is a successful startup.  Is this a Yosemite bug or do I have a virus?  I also have some funny tiling on the screen at youtube and some other websites.  Another bug? 

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • For some reason every time I start Firefox I get a window to print the current page. Am I the only one this happens to? Is there any way to get rid of it? It just started with the previous update.

    When I start Firefox, the standard print window comes up as if I had clicked on print under the file menu. I close the window without problems, and it doesn't show up again until the next time I start Firefox. When I click on print under the file menu, I get the print window without any problems.

    See:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder.<br />
    You may need to delete active-update.xml and updates.xml as well if present.
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
    If you have problems with updating then easiest is to download the full version and uninstall the currently installed version and remove the Firefox program folder to do a clean install of the new version.
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • I play travian it has password protected accounts firefox asked to remeber password i said yes on 1 server and no on another now every time i login its good for 1 page before it kicks me back to the login screen. any idea why ?

    when i log on to the page i get kicked back to the log on screen every other mouse click.
    == URL of affected sites ==
    http:///s4.travian.us/dorf1.php

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Every time I update Firefox I can't get back on the internet. I have to uninstall and go back to an old Firefox.

    I have an old Firefox. Every time I update to a new version, I can't get back on the internet. It tells me it can't find the server. So I have to uninstall the updated version and go back to my old version.

    Check your firewall settings.
    http://kb.mozillazine.org/Firewalls

  • I cannot open my apps on my iPod touch 4th generation. Every time I open an app it sends me back to the main page

    I cannot open my apps on my iPod touch 4th generation. Every time I try to open an app it sends me back to the app selection thing.

    Try a hard reset first. Press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. 
    If still no luck, try downloading and installing a new app from the App Store.  Doing so has cleared the issue up for several users.
    B-rock

Maybe you are looking for

  • Apple Mail keeps crashing on my iMac 10.6.8, please help

    Hello, I have recently had a bug in my Apple mail which causes it to crash, I've removed email accounts and re added them thinking there was a corrupt email or draft, but it keeps crashing on my. The pattern is irregular. I have just turned it on thi

  • IPod Classic won't charge with iPad charger

    I have a 120GB iPod Classic and tried to charge it using the charger from my iPad 2. No luck - the indicator doesn't show that it's charging. The iPad 2 charger works fine on my iPhone 4 and I read that it should work with the iPod as well. Shouldn't

  • EL for a specific page in a Navigation Model with a Pages Query

    In WebCenter Portal: Spaces we are using the Default Navigation Model, which includes a Pages Query which shows all the accessible pages for the current space. How do I create an EL Expresion that allows me to perform navigation from within a page? <

  • How to know the platform type

    Hi I would like to know the platform type am using in the frontend..am trying to use the static method cl_gui_frontend_services=>GET_PLATFORM...it returns '5'..am not able to interprete the importing parameter Please suggest Regards Panda

  • One empty contact group, deleting/resyncing no help.

    Hi, I've got an iPad 2 and an iPhone 4 with a white MacBook all running the latest respective OSes.  Last night I cleaned up my contacts and created three groups, deleting the old ones (Friends, family, work).  All of them appeared this morning and w