Every time I switched my iPhone off, he switched automatically on. What is wrong?

Every time I switched my iPhone off, he switched automatically on. What is wrong and what can I do about it?

How are you switching it off? Are you holding the home button and sleep button on top at the same time until the phone shuts off? or are you just holding the sleep button until you see the 'slide to power off' slider? If you're doing the former, you're not actually shutting off the phone, you're resetting it. If you're doing the 'slide to power off' thing, and your device isn't staying off, it is possible that you have a hardware issue. Create a backup, then restore your device as new. If the issue still happens when you have a wiped device, it's a hardware issue for sure and it needs to be replaced

Similar Messages

  • When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin.   How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

    When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin.   How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

    Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
    Edit:  Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on?

  • I have a iPad and a iPhone. I am logged into the same Apple ID on both devices. Every time I download something on my phone it automatically downloads on the iPad how do I turn this off?

    I have a iPad and a iPhone. I am logged into the same Apple ID on both devices. Every time I download something on my phone it automatically downloads on the iPad how do I turn this off?

    you need to turn automatic downloads off - its under settings>itunes & app store

  • How to disable the message that pops up every time i connect my iphone "photos in the camera roll of iphone cannot be imported because the device is locked with a passcode"?

    Wrongly posted in iPhoto forum, should probably be posted here instead.
    I want to remove the message that pops up every time i connect my IPhone that says: "Photos in the Camera Roll of "Name" cannot be imported because the device is locked with a passcode.".
    This computer is not one that I want to import photos to (or sync with the iPhone), so this message is just very annoying, and it pops up all the time. I cannot find a way to disable this message. It is constantly appearing. No application is launching, I have turned off the iPhoto launch in the Image Capture app as well as in iPhoto. Thanks in advance if anyone has any information about this.

    Because your computer sees your phone, as it would see any digital camera, as long as you have photos in your camera role. Since you state you don't sync with this computer & have a passcode on your phone, that's why you get that message. The only way to prevent that message is either start syncing with this computer; remove the photos from your camera roll prior to connecting; or first turn off your passcode before you connect. Either that, or you live with it.
    You shouldn't be storing photos in your camera roll anyway. iPhone camera roll is not designed for photo storage. You should be regularly importing them.

  • Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac.

    Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac. I have background switching unchecked in my preferences, and I have never selected it as an option. Also, when I go to my preferences, it will show the icon of the picture I changed it to, even though the desktop itself has switched back.

    I would start with some basic troubleshooting.
    REPAIRING DISK PERMISSIONS -
    NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
    - click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it.  Then double click on 'Disk Utility'
    - When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
    - ensure the the "first aid" tab is highlighted blue in the middle of the screen
    - click the button at the bottom that says 'Repair Disk Permissions'
    - this process will take a few minutes to run.  It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
    Dan Frankes has written an excellent article for Macworld on "Permissions" and the need to repair them - see - http://www.macworld.com/article/52220/2006/08/repairpermissions.html.    Another good web site is - http://www.thexlab.com/faqs/durepairfns.html.
    REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
    - restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
    - select english as your main language then the continue arrow
    - select "Disk Utility" on the resulting screen then 'Disk Utility' ---
    - When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
    - ensure the the "first aid" tab is highlighted blue in the middle of the screen
    - click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
    - this process will take a few minutes to run.  It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
    If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays  "The Macintosh HD appears OK".
    Once done, restart the computer as normal

  • HT201263 I get a message every time I switch on iPad 3 that ( IPAD IS DISABLE ) connect to iTunes .

    Every time I switch on iPad 3 , I get a message that this ( I pad is disabled ) , connect to iTunes ,

    iPad- Basic troubleshooting
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New
    Also, see iTunes- Restoring iOS software.

  • Making weird sound every time I switch songs.  Really annoying..

    Ok, so my iPod Touch makes a weird sound every time I switch songs. It is the exact same sound the iPod makes when connecting the USB cable to my macbook. I tried turning off all sound effects, didn't help.
    Any idea? Any help would be greatly appreciated. Thanks!

    Strange. Which phone model? What file format is used for the songs? How did you transfer them to your phone? Where on the phone do you put them?

  • Almost every time i unlock my iPhone many apps appear to be installing simultaneously

    Almost every time i unlock my iPhone many apps appear to be installing simultaneously, and after a few seconds the "install" or something like that and i can use them again.
    This happens on my iPhone 4s and iPad 2, both with 5.1
    I think this is happening since 5.1, has someone the same problem?

    Hi
    It seems you are using the same account in both devices. In Settings --> Store, check if Apps is on or off.
    if it is on, just turn it off.

  • This phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    this phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    Have managed to cure it based upon the following information received -
    I keep having this problem with iTunes when I try to connect my iPod Touch to iTunes. I keep getting this error message: "This iPod cannot be used because the required software is not installed".
    What I did:
    Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
    I have already done this required step about a hundred times and I am still getting this same error so if you have any idea of what I can do please help.
    Solution
    I was running the 64-bit version if iTunes, and I did uninstall and re-install just to make sure -- no luck. Turns out there's a really easy solution, I'll spare you the detail of how I figured it out, but if you encounter the same issue, here's the solution:
    1) Using WinRAR (or any other decent archiving program), extract iTunesWindows64Setup.exe
    2) Right click on AppleMobileDeviceSupport64.msi and choose Properties.
    3) Switch to the Compatibility tab and check the "Run this program in compatibility mode for:" box, and select your only option, "Previous versions of Windows", in the drop-down box.
    4) Click OK
    5) Double click the AppleMobileDeviceSupport64.msi
    6) Tell it to Repair your current installation
    7) Done!

  • Every time i attach my iphone to my computor it crashes

    hi i am new to all this but every time i attach my iphone to my computor it crashes and causes a blue screen error it only reconizes the phone as a camera not a phone and then shuts off
    please help

    Hi i have been on another site today and some one suggested that if you have photos in your camera roll that can cause the crash but does not say why it does it.I did delte the photos i had on the camera and it worked the phone loaded the music i wanted to put on it and it uploaded photos from my picture folder on the computor.But as soon as i take a picture and contect it crashes so would that suggest it is the web cam software do you think?I will phone logitec tomorrow to see if they can help i tried today via email but they are asking for a model number of the camera which i cant find on the camera only it's name so i will phone them
    regards anne

  • Every time I connect my iphone to my applemac it doesn't automatically sync and download my photos as it once did.  The only option it gives me is to "quit" Im too scared to download software as last ime I tried it wiped everything and I had to restore my

    Every time I plug my iphone into my MacBook, it refuses to sync and download photos etc. This has been happening for a month.  I tried to upgrade itunes yesterday and ended up in a mess. It wouldn't stay connected to internet, then the iphone was left with a screen with the 'itunes icon of 2 notes in a blue circle, then under it the white connection lead".  Each time I plugged it back in to my lap top, it refused internet access. A friend "restored" my iphone from scratch today and I have lost all my contacts.  My photos are still there which is amazing.  I now am trying to download my precious photos so I dont loose them again.  It still refuses to sync and only offers me "quit" as an option.  My phone in 3G  and I have a MacBook lap top.  Any help very much appreciated. I rang the apple help line but I dodn't really understand what he told me.  I am almost computer illiterate  (too old to understand all this technology).  Thank you.

    When was the last time you did an update on your iphone? That might be the problem. BTW which OS are you running on your MacBook?

  • Every time I sync my iphone 4 with itunes my ring custom ring tones change.  I have 7 custom ring tones in itunes.  One time it will load 1 custom ring tone the next it may be 3 then the next it is one again.  The last time it gave me 4 of the 7.

    Every time I sync my iPhone 4 with iTunes the number of my custom ring tones change.  I have 7 custom ring tones listed.   The first time it will load 1 of the ring tones and the next time it will load 3,  The next time it will be back to 1.  If I have assigned one of the custom ring tones and it does not get loaded it goes back to the ring tone that came with the phone.  The last time itunes gave me 4 of the 7 so I have not tried to sync it again.  I am using iTunes 10 (10.4.10), and windows 7.
    Has anyone else had this problem??
    Any ideas to what I need to do??

    Have you ever had all 7 of them synced before? Are these ringtones you made yourself? Is there a chance they could exceed 30 seconds in length? Is there a chance you have moved the original file location on the computer? May need the answers to a couple more questions to try and determine an answer.

  • TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    In the course of your troubleshooting to date, have you also worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Every time I sync my Iphone and iPad to itunes it makes me restore them. Why?

    Every time I sync my Iphone and iPad to itunes, it makes me restore them, Why does it do this?

    there are a load of suggestions in itune - this is not an icloud issue as wifi sync is seperate
    many people have found success by restarting the applemobiledevices process and opening some ports on the firewall - all detailed under itunes support

  • Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.

    Every time i connect my iphone to itunes and trying to do a backup or get the new update it says i have to restore my iphone. and then that doesnt work, i tried to reinstall itunes but it doesnt work. i get this all the time. fix it please.

    iTunes states " There's a problem with your Iphone, please contact apple service center " Also i took my iphone to a local service man and he told me the IMEI code has been corrupted and there's nothing that can be done about it. Please help, if you have any solution.
    Thank you

Maybe you are looking for

  • How to install adobe contribute 6.5

    I purchased Adobe Contribute 6.5 on a different computer but need it download to this computer I am currently on. How do I download it to this computer?

  • Vendor Master - Validity date table

    Hi ,    Do we have table for maintaining the validity    period of the Vendors.if so , help me out.    or how the validity period is taken for the    vendors. Thanks.

  • Stuck Pixels - In Lines

    I have had my iPod touch for a little over a year now, and I have had a few stuck pixels along the way, which normally go away. The other day I flicked on my touch, and there were 3 lines about 1/4" long (length wise) going horizontally across the sc

  • How to get COMMAND LINE input

    I am writng an application to add numbers inputted by the user at the command line in a DOS session in the java application. How do i read in input from the user? any help is much appreciated

  • Displaying an image in my JSF page

    Hello, I am a beginner in JSF, and I wnat todisplay a picture loaded from my Data Base in my JSF page. I follow this steps to get my image from my DataBase but I don't know how can I put it in my JSF page: 1/My image is stored in my Data base (Blob t