Every time i try to add another book to my library it freezes and say the program has stopped working.
I've already tried uninstalling and installing of the same and older version
which ADE version you are using ? Try to use latest ADE VERSION :3.0.1 available on website
Similar Messages
-
Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
If that's not what you see, post the contents of the window. -
My email is not working properly, I can receive emails but I cannot send them. Every time I try to send an email an error message appear saying "The recipient was rejected by the server because it does not allow relaying". There used to be no problem with my email it has only come up recently. Also, my Internet works fine. I have tryed restoring my iPad to factory settings but it still doesn't work. Does anyone know how to fix it?
try to check the email id of the guy you are trying to send the email to as i had the same problem i had written yahoo.com when it was yahoo.in
-
Also I've tried restarting my computer many times and it still says the same thing...
Anyone know how I can fix this?
-
Every time i try to add a folder to my library itunes crashes
when i get the menu to add a folder, i select the folder then itunes just freezes up and i have to go through the end process menu to close it
The key question would be what size and format are the photos and how much memory do you have free on your iPad?
Peter -
I need help
Hi korasaurous,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting steps in this article helpful with resolving the error message you're seeing:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
There are several ways an add-on can cause iTunes to act erratically, such as those listed below:
You see this alert while syncing: "... cannot be synced. A duplicate file name was specified."
Best Regards,
Jeremy -
for a few weeks i have not been able to access the itunes store from the itunes on my laptop. every time i click on it it tells me it cannot access the store...not sure why. and says this: ITUNES HAS STOPPED WORKING a problem caused the program to stop working correctly. windows will close the program and notify if a solution is available.
I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....
Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe -
I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?
Have you seen my User Tipp here
"Movie Magic" with Stills and Dissolve
When you 'prep' your stills in any 'picture app', you can do a lot of marvel by simply applying dissolves.
In your case, I would create a white document (in Pixelmator, Keynote, Photshop, online at pixlr.com, whatever ...) and another with your logo (and further more ones with additional logos). Drag the jpgs into your iMovie Project and apply dissolves - tadahh! - logos appear on white. -
'iTunes has stopped working' error message every time I try to add files
Every time I try to add files to my iTunes, I received the erorr message and the program closes. I have uninstalled iTunes, re-installed and the problem stopped occuring after I added a few files. It's now beginning yet again.
This is what the details specify:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.0.0.68
Application Timestamp: 4c7e6c10
Fault Module Name: objc.dll
Fault Module Version: 1.435.14.20
Fault Module Timestamp: 4c3422a6
Exception Code: c0000005
Exception Offset: 00008374
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I have the latest version of iTunes 10. Can anyone help me with this issue? I'd appreciate it. Thank you in adavance.Just wanted to say that I have the same issue. It also crashes when I try to save files in other programs like IE or Chrome. objc.dll comes up everytime, and it's also related to the apple mobile device service, as the crashes go away once I turn that service off. Unfortunately, I have an iPad, and an iPhone as well, and I need that service turned on. I have scoured the internet for answers to no avail. So far I've uninstalled everything and reinstalled. Disabled all shell extensions. used the repair function on all apple software (found in add/remove software). I've even tried to use different versions of iTunes. Nothing worked.
Here's my info as well, if it helps.
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.0.1.22
Application Timestamp: 4c9c64ce
Fault Module Name: objc.dll
Fault Module Version: 1.435.14.20
Fault Module Timestamp: 4c3422a6
Exception Code: c0000005
Exception Offset: 00008374
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 -
Every time i try to add content to itunes it crashes
Every time I try to add files or a folder to my Itunes it crashes.. I even tried to reinstall...
OK, I have read several Threads discussing the issue of ITunes not loading in Windows 7. Check the compatability setting to ensure that it is set for Windows 7. After stumbling around looking at how my firewall and all that was set up... I stumbled upon this and my problem was fixed.
Right Click on the ITunes ICON
Click on Properties
Click on Compatability
In the Compatability Mode Window, click on the drop down bar and scroll down until you find Windows 7. Click on this to select it. Go to the bottom of the window and click OK.
Double click on your ITunes ICON. Your program should start. -
I have uninstalled and installed the latest Flash Player 17 many times. I am currently working on a yearbook site that gets locked every time I try to add photos. I have also received a plug in error even though the plug in box is checked. I have a MacBook Pro. Please help!!!
To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945 -
Every time I try to add photos to iMovie it quits.
Every time I try to add photos to iMovie it quits.
Hi there kirkham5,
You may find the troubleshooting steps in the article below helpful.
iMovie: How to troubleshoot "Application Unexpectedly Quit" messages
http://support.apple.com/kb/HT3143
-Griff W. -
Every time I try to add a new video to my photo folder...iTunes says it's experiencing a problem and then it crashes and shuts down. What can I do to add video to my photo folders?
Hi mterry1723, one solution that might be worth trying is this:
- Close iTunes, if it's open
- Open Safari and got to 'Preferences'
- Select 'Security' on the top
- Untick all the security options in the menu
- Click the 'Show Cookies' button and look for all the 'apple' entries in the left-hand column.
- Highlight them (select them collectively) and press 'Remove'
- Now open iTunes and buy the song as usual.
- You may be asked to do the same security process as before, so do as asked.
- Hopefully, the security check will now have accepted your answers and start downloading the song as normal.
Remember to re-tick all the required security options you had just un-ticked in Safari preferences. You don't need to bother about opening the cookies again.
I hope this has worked for you and my profoundest apologies if it has not. Worth a go, though!
I did see this thread: https://discussions.apple.com/message/18259935#18259935 which may be of more help, mainly the last entry by 'c2boyd'
Message was edited by: Bongomal -
I have 8 apps that, when I tried to update, are now stuck on "installing" in the box that says update. every time I try to update another app, it gets frozen like this as well. I was able to quit all apps, but these, as they do not respond. Any ideas?
Reset your iPad by holding the home and on/off buttons together for 6 or 7 seconds till the Apple logo appears. Then update your apps one at a time. Do not start the next app until the current one downloads and finishes installing.
Maybe you are looking for
-
Forwarding Webmail to Mac Mail client
My university runs on a mail server called Webmail. I have the mail forwarding from webmail to my g-mail account on the generic Mac Mail client. I like this so I can get all my mail from school sent to my iPhone. However, my issue is that I would lik
-
Automatic filling metadata - address items
Hi, I have table of suppliers with these columns: Name, city, postcode, street I have metadata: Sup_name (option list), Sup_city, Sup_postcode, Sup_street. I would like to choose Sup_name and other data will be automatically filled from the suppliers
-
Any Function mudule for BOM Output as per IDOC BOMMAT Message type
Hi is there any Function module which can retrive the field values from BOM tables and map to the BOM IDOC structure? Thanks JK
-
Will the new IPad display PDFs quicker?
I use my IPad 1 to follow musical scores that I have downloaded (legally) in PDF. Some complex scores with a large number of instruments can take several seconds to refresh the screen after changing pages. I have compared this against an IPad 2 and i
-
Linux + Oracle vs WCF service
I'm having a problem between Linux /Oracle calling a WCF service. My client uses Oracle/Linux to send/receive data to my service, but it's using iso-8859-1 encoding, wich is not accepted by WCF (utf standard). I've found some solutions for this probl