Every time I use the Lighting Effects Filter the software crashes.

Every time I use the Lighting Effects Filter the software crashes.

It worked last Friday. I don’t know if there has been any update this week. All updates are done automatically by our IT department.
Heléne Björklund
[ excessive signature and quoting removed by admin  - please remember that this is a web forum ]

Similar Messages

  • Router reboots every time i use the txt app in iphone 3gs

    I have a netgear cgd24g router and it reboots only every time i use the text free app in my iphone 3gs. First i felt weird and stated to google this problem. I found people having somwhat same kind of problem with other brands and had suggested few solutions, like resetting it, changing it to a ascii security code with a $, upadating the firmware of the router etc. I have done everything but i still have the same problem. I have 2 laptops and a desktop (no wireless in desktop) nothing is wrong when all three are working together. I even tried adding two more laptops and nothing is wrong. But as soon as i open the text free app and start texting the router reboots like in resetting it. The problem is only with the txt free app. Nothing happen when i browse thru safari or use youtube etc. But wen i use the txt free app the light goes off and comes back on one by one. I even went to the extent of asking my friend to download the app in his iphone and tried it using my wifi , the same thing happened. i even switched out the old netgear router with a new one and the same thing is happening. I am tried of this. CAN ANYONE HELP ME PLEASE ?????

    yes i have tried everything from changin the security type to checking the firmware version. The firware version was the latest so i didnt have to update it. About changing the router, i did switch the old netgear cgd24g to a brand new netgear cgd24g. The brand was same because that is what my service provider would give me. I like the sugestion about trying it with a different router and see if the problem persists. If the problem is gone then i will get another one. This will help me figure out where the problem is.

  • Why does my mac air sound like it was going to take off every time i use the wifi????

    why does my mac air sound like it was going to take off every time i use the wifi????

    Power Cycle
    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works.  However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled.  Help!

    The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works.  However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled.  Help!

    It's not Logic that can't find them, it's your Komplete apps, though if you did exaclty as you say I can see no reason why they can't.
    Do you know where the apps installed them in the first place? I chose a non-standard locarion for mine, but I'm sure it installs sounds to your documents folder/native instruments/name of app.
    Go into the prefs of each app and choose the library location button on the library tab and point it to the relevant folder in documents/native instruments and see if that works
    jake

  • Why do I have to search for a wifi network most every time I use the internet?

    Why do I have to search for a wifi network almost every time I use the internet?
    We have Cox internet on a wireless router.
    It doesn't seem to be able to hold the wireless connection.....even a couple hours.
    The router sits on the desk next to the computer.
    Thanks for any suggestions you have.

    I don't have any trouble connecting to the internet once I choose our network from the choices.
    The computer just can't remember it.

  • Iphone4 rebooting every time I use, the screen turn brown when reboot.

    I have a Iphone4 acquired a three days ago, which is rebooting every time I use, the screen turn brown when reboot.what I can do about it?

    If you just got it, take it back and get it replaced.

  • Is there a way to permanently save color libraries in Illustrator CC 2014 so that every time you launch the software, the colors appear in Swatch palette?

    Is there a way to permanently save color libraries in Illustrator CC 2014 so that every time you launch the software, the colors appear in Swatch palette?

    Modify the New Document Profile you use the most to reflect what you want it to contain or just make a new document with all the stuff and save it with a distinct name to the New Document Profiles folder in your user profile.

  • Why does FCPX crash every time I use plug-in effects?

    I don't understand why FCPX crashes every time I use a plug-in effect. I install the plug-in effects in the Effects folder - User/Movies/Motion Templates/Effects - and I apply the plug-in effect to the clip in the timeline, but as soon as the clip is in the viewer and I open the inspector FCPX crashes. Why does this happen??
    I have tried different plug-in effects, but it crashes every time I try to use the them.
    I use a FCPX trial (10.0.1) and I don't have motion 5 installed.

    Ok, I need to 'fess up. The issue turns out was not the plug-in. It was my NAS. My Ethernet config was changed then changed back again so although the NAS seemed fine and accessible after the changes, clearly not everything was perfect. The FCP Events and the Project itself I am working on live on the NAS and I work directly from it. A reboot cleared up the whole problem. Dah, I'm such an idiot.
    Sorry Noise Industries! Everything is good!

  • Reconnecting Referenced Files...every time I use the program! Help!

    Every time I use Aperture, regardless of any outside variables I change, it inevitably unlinks nearly all the photos in my library, or will keep a third linked with no rhyme or reason. I've tested every variable I can think of, stopped using spaces, sent heated emails to our friends at Apple...nothing seems to make a difference. The program is a technological equivalent of a brick 50% of the time I open it.
    These photos are on my main hard drive, not an external disk that gets put to sleep. This problem has occurred while I was in the middle of using the program, switched to finder, switched back.
    Has anyone else had a problem with Referenced Files coming unlinked? Or Can anyone suggest an alternative program to Aperture that actually works?

    Ok, two things I've figured out with 10.5 and Aperture:
    - If you use Spaces, it will eventually cause your referenced images to become unlinked.
    - If you hide or minimize Aperture, it will eventually unlink the album you are working on, and eventually your entire library. Sometimes this problem can be fixed simply by restarting Aperture, but other times, if you let it sit for too long or your computer goes to sleep in this way, your whole library may come unlinked.
    I (so far) haven't had any problems with this since I stopped hiding the application. It is a bug, but at least in my case I'm able to work around it by always keeping the window open if the application is open.

  • I think my mac is infected with a virus, every time I use the internet pop up pages appear constantly what should I do?

    I think I may have accidentally opened an email attachment which was fake.  Ever since I did this my mac constantly opens pop up pages with ads every time I click the mouse.  I have checked in preferences and it says pop up pages are blocked but still they keep appearing.  How do I stop this?

    You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • ID CS 3.0.1 (838) crashes every time I use the Direct Selection Tool

    We have recently installed an upgrade to InDesign CS for being able to open documents generated by newer ID versions, thus turning the InDesign version into CS 3.0.1 (838).
    Since then, every time we start to use the Direct Selection Tool (white arrow) the program crashes.
    As this is a relatively old upgrade (2005), I was hoping to find the solution on the Internet but had no success.
    Does anyone know what should we do to solve this problem?

    Yes, I did. Even though we're in Brazil, we prefer to use the softwares in their native language (english) in order to get eventual updates more quickly. This also applies to the operational environment (Windows XP Professional - SP3, with the most recent updates installed)

  • Acrobat re-installs at the start-up every time I use the computer

    Every time I start a computer Acrobat keeps re-installing.
    First I get a message "Preparing to install" from the Windows installer.
    Then I get a message "Please wait while Windows configures Adobe Acrobat".
    And then I get a message "You must restart your system for the configuration changes made to Adobe Acrobat pro to take take effect. Click yes to re-start or No if you plan to re-start later."
    If I click Yes, then after a re-start it all start from the beginning - I get a message "Preparing to install" again...
    If I clink NO, I can use the Acrobat Pro, but this message is very annoying.... Also, it takes  extra time before I can start using the computer...

    Please back up your computer before starting any remedial action. System Restore is not sufficient for any catastrophic problems. First, I do not recommend the use of any 3rd party registry repair software. If you stick  to using the original publisher's software to isolate and/or fix any problems you will generally be much better off.
    In general, when you see the installer running right after trying to start an application, it means the installation is corrupted. Therefore, that's where I would begin troubleshooting.
    After BACKING UP YOUR SYSTEM, I would try the following:
    1. Uninstall the application.
    2. Clear the Windows logs
    3. Disable User Account Control
    4. Disable any third party software which might be conflicting.
    5. Reboot, if necessary, and then reinstall with Administrator privelages using the following procedure: http://kb2.adobe.com/cps/400/kb400682.html
    6. Upload (attach) your log to your next post so other people and I can look at it.
    7. Check your Windows Event Log for error messages related to the installation routine. Copy any installation error messages to your post.
    I'll take a look at the resulting log for unusual events.

  • Infinity connection drops every time I use the lan...

    So I've discussed this on here before with no joy (https://community.bt.com/t5/BT-Infinity-Speed-Connection/connection-drops-every-time-I-get-a-call-on... and I've tried swapping out all the equipment with no success. It is driving us mad now....we have to unplug the landline if we're going to use the Internet for a protracted period, just in case!
    Advice please: where do I go from here? When I use the broadband section to report a fault I end up in a dead-end of self-help docs.
    Do I report it as a phone line problem (and pay for an engineer to visiit) even though the phone line tests out OK?
    Solved!
    Go to Solution.

    Well, that will teach me to be so optimistic..
    So I'm now £129 lighter and using a new line...and the broadband doesn't drop out everytime the phone rings..
    BUT it drops out periodically all the time now.. AND the speed is much less than before (I get 30 Mbps on a good day..15 Mbps is typical ,and it was less than 10 Mbps today before it dropped out completely). This may sound churlish to some but I work from home sometimes and the drop in speed, coupled with the frequent disconnections, is making it unworkable...
    So I've reported the fault and despite the very nice Indian woman telling me that '15 Mbps is typical for wireless' after going through a very lengthy script, I am not happy. Wireless/Wired = makes no difference..I've tried...
    Since its worse than before I've asked whether than can switch me back to my old line..the call raised on the 11th was marked as resolved today although I've still no resolution even though I was promised an answer within 24 hours..and have been promised that again today...and nobody rings me on my contact number that I give them (and is in my MyBT profile) but spurious 'we tried to contact you' messages are left on my home answerphone while I'm at work...
    Resolved
    Broadband fault VOL011-***********
    *sigh* according to the official checker I should be getting better....
    (edited to remove the actual fault code since it is deemed a security risk)

  • Iphone 4S newly updated to iOS8, keeps popping up window notifying me of things I turned off (cell usage, location, etc) to preserve battery life.  Is there any way to make them stop telling me every time I use the affected apps?

    I have finally taken the step of updating my iPhone 4S to iOS8 after learning the hard way last update to wait for the bugs to be worked out.  I was horrified to find that the battery was being sucked dry in no time at all.  After finding a great article posted elsewhere on the apple forums, I went through and turned off all unnecessary options involving the use of cell data, location services and background refreshing.  My battery life has thankfully returned to what it was before the update.  
    HOWEVER, now, every time I open an app for which I turned these things off, the window informing me of that pops up.   I am getting really irritated by this as I made all of these decisions deliberately and am well aware that I may need to go back and change them in order to activate certain capabilities when I want to use them.  I had done the same thing with the last iOS, but there were far fewer that needed to be turned off and the battery life seemed to be less affected by those that I left on so it was not the annoyance it has become now.
    Is there any way to make the phone stop presenting me with these idiot messages?   TIA

    Sorry no, there isn't a way to turn off those reminders.
    You can send Apple a feedback here  http://www.apple.com/feedback/

  • PSE would freeze every time I use the brush tool !

    Hello guys, my name is Abdulrahman and this is the first time I post so please, take it easy on me. I used photoshop elements and premier 12 for about a year now and everything has been working fine. I haven't actually used PSE for a long time (probably since April) and I opened it 3 days ago trying to use the brush tool, but it would freeze. The cursor would stay as the brush icon no matter where I point it and it would not click anything, I have to force quite the application as it says '(application not responding)" next to it. I looked for help online, I updated PSE as well as my operating system (I work on a Mac by the way), I tried uninstalling and reinstalling the application, and I also tried re-creating the preferences file, however nothing worked. Every other tool works fine, it is probably just the brush tool it has problems working with.

    Hi,
    We sincerely apologize for the problem that you have been facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
    We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
    In the meanwhile, you have two options to work around this problem:
    1. Option1: Use a mouse instead of the trackpad
    2. Option2: Install a plug-in which should workaround the problem
    Plug-in installation instructions:
    1. Close Photoshop Elements
    2. Download this zip file to a location you can easily find (e.g. your desktop)
    3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
    • For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
    • For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
    You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
    Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
    If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
    Hope this helps!
    Regards,
    vaishali

Maybe you are looking for