Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage.  Every time I turn on, I change it back to save to SD card.  It stays that way until it is turned off for more than a minute.  If I do a r

Every time my lg g pad 8.3 lte tablet is turned off it reverts the saving email attachment back to internal storage.  Every time I turn on, I change it back to save to SD card.  It stays that way until it is turned off for more than a minute.  If I do a restart, it holds the setting, but loses it when it is shut down for any period of time.  Does anyone else have this issue?  The setting holds for photos taken with camera storing to SD card.  Only the email attachment setting does not hold.

I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
I don't know if this will help you much, but it might.

Similar Messages

  • My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time.

    My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?

    Is there a crash log? If so post the first 100 or so lines o fit
    Do you know what the ofending plugin is? and where it came from?
    LN

  • My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

    My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
    Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
    Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
    thanks.
    Sorry my bad Inglês.

    Try a reset hold home/sleep buttons until Apple logo appears
    If that does not improve try a restore
    http://support.apple.com/kb/HT4137
    For your information
    We are NOT Apple here we are all users helping other users
    so emotion is ignored

  • Monitor any record to stay in queue for more than 5 minutes under AQ ADMIN schema

    Hi All,
    We need to prepare script which monitor/notify us the record which stays in queue for more than 5 minutes under AQADMIN queue tables. Can someone throw light on this?
    Regards,
    MD

    Hi Asif,
    We need script to monitor if we have "waiting" status in msg_state column of the below table is waiting for more than 5 minutes.
    SQL> desc AQ$TBL;
    Name                                      Null?    Type
    QUEUE                                              VARCHAR2(30)
    MSG_ID                                    NOT NULL RAW(16)
    CORR_ID                                            VARCHAR2(128)
    MSG_PRIORITY                                       NUMBER
    MSG_STATE                                          VARCHAR2(16)
    DELAY                                              DATE
    DELAY_TIMESTAMP                                    TIMESTAMP(6)
    EXPIRATION                                         NUMBER
    ENQ_TIME                                           DATE
    ENQ_TIMESTAMP                                      TIMESTAMP(6)
    ENQ_USER_ID                                        VARCHAR2(30)
    ENQ_TXN_ID                                         VARCHAR2(30)
    DEQ_TIME                                           DATE
    DEQ_TIMESTAMP                                      TIMESTAMP(9)
    DEQ_USER_ID                                        VARCHAR2(30)
    DEQ_TXN_ID                                         VARCHAR2(30)
    RETRY_COUNT                                        NUMBER
    EXCEPTION_QUEUE_OWNER                              VARCHAR2(30)
    EXCEPTION_QUEUE                                    VARCHAR2(30)
    USER_DATA                                          TEST1
    PROPAGATED_MSGID                                   RAW(16)
    SENDER_NAME                                        VARCHAR2(30)
    SENDER_ADDRESS                                     VARCHAR2(1024)
    SENDER_PROTOCOL                                    NUMBER
    ORIGINAL_MSGID                                     RAW(16)
    ORIGINAL_QUEUE_NAME                                VARCHAR2(30)
    ORIGINAL_QUEUE_OWNER                               VARCHAR2(30)
    EXPIRATION_REASON                                  VARCHAR2(31)
    CONSUMER_NAME                                      VARCHAR2(30)
    ADDRESS                                            VARCHAR2(1024)
    PROTOCOL                                           NUMBER
    Regards,
    MD

  • My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

    My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

    Contact Apple Support or an Apple Store if you have one near you. Your battery needs to run through the diagnostic test. You can also try to put the device into Recovery mode as well and rsetore the iOS software, and set up the device as new. Follow this article on Recovery Mode:
    http://support.apple.com/kb/ht1808

  • I have tried to download update for Firefox 3 separate times ,but each time it runs for more than 30 minutes and is still running, is this normal,? How long should this take?

    I have tried downloading the update for Firefox 3 times, but had to go to bed before it was finiahed....seemed to be more than 45 minutes is this normal? How long should it take?

    Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
    http://support.apple.com/kb/TS1591

  • Droid X battery will not stay charged for more than 5 minutes. Help

    My Droid X will not hold a charge for more than 5 min. 1 phone call and the phone shuts down.

        bdsutton,
    Thanks so much for your inquiry! There hasn't been a software update for the Droid X since 2/16/12.
    I would like for you to put the device in Safe Mode http://bit.ly/OAXCYh and then check your email to see if it still turns off.
    Safe Mode temporarily disables all applications that have been installed via the Android Market. Performing this troubleshooting step is necessary to determine whether a 3rd party application is the cause of an Operating System / Application issue.
    I want you to try that to see if there is something else affecting why the phone battery goes low only when you check email.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • Router won't stay connected for more than 45 minutes

    I have a BEFW11S4 v. 4 (firmware 1.52.02) wireless router that I've been using for years. Recently (i.e., within the past week), it has been dropping its internet connection about every 45 minutes. The network set-up is: an XP desktop connecting via an access point (Linksys WUSB11 v. 2) and a Vista laptop connecting via its internal wireless card. I also have a Vonage-supplied Linksys router running VoIP (RT31P2) that's connected to the wireless router. The cable modem is a Scientific Atlanta DPC2100 series.
    The routers/modem are on a bookshelf in the middle of a wall all by themselves. There is a DECT 6.0 cordless phone across the room (as far away as possible from the router).
    When the router is connected, everything works with no problems whatsoever. Then, after about 45 minutes, the connection drops from everything. After unplugging the wireless router for about 30 seconds then plugging it back in, it's good to go for another 45 minutes. I've tried changing the wireless channel with no luck. I've also cycled the entire system (*several* times. ugh!) The SSID is not "linksys." My internet provider did recently change to Comcast, but the problems I've been having don't align with the change in providers.
    Some quirks that I've noticed is that the Vista laptop can see the network, but can't connect, saying it received no response from the router when I run the "Diagnose the problem" function. The XP machine responds in a similar manner; it has my network on the list, but just hangs when it tries to connect. Also, sometimes the VoIP router is affected (i.e., the phone line disconnects), but other times it's not.
    I'm extremely frustrated at this point, and ready to chuck everything out the window. Does anyone have any idea what could be causing this type of problem?

    Well if you are able to go online directly with the modem...connect modem>>>>route>>>>pc....if its a cable modem then reset the router for 30 secs in such a way that power light is blinking on the router.Now, power cycle the complete power cycle...ie., unplug the power cable from the modem & from the router...now plug in the power cable to the modem once all the lights are solid green you could plug in the power cable to the router....& you would be online

  • FCP 5 won't stay open for more than a minute

    First I upgraded from Quicktime to Quicktime Pro to convert .avi's to .mov's. That worked for about three weeks then suddenly all converted files played without any sound. Now after editing an mp4 on FCP I decided to upgrade the media to avi, so I upgraded the mp4 to avi using VisualHub, whose output plays fine in Quicktime (with sound), but while editing it together in FCP I've started to have problems while trying to integrate FCP with LiveType. I have to save after every change to the sequence. After integrating a LiveType file into FCP I found FCP shuts down after running for a minute, regardless of what I'm doing with it.
    I'm currently working on an iMac Intel Duo and hope this doesn't rise out of a non-universal version of FCP running on an intel processor (perhaps a problem with Rosetta). If so I might have to upgrade to FCP 5.1
    Any ideas?

    How would I check the pixel dimensions?
    With the mp4 they were copied off of a dvd with a program called Handbrake (it copies DVD's onto your iPod), though often whatever I get out of Handbrake I also have to put through a program called moviepod (which converts media files into mp4 format and once the conversion's done it appears on your iTunes browser).
    I recently purchased a DVR which can load DVD's into the computer through multiple formats but then the DVD was rented and I figured I just as well use the media I already had in my computer.
    Oh, and by the way, Thank you for the help so far. Though I'm afraid there's no clear resolution in sight I appreciate your apt attention.
    The avi media is just the mp4 media converted through VideoHub (I've had no luck with either .avi or mp4 files using Compressor). The problem with editing may rely in my choice of converting programs and not FCP at all (the truth is I don't know much about these programs, outside what I use them to do (convert media) ).

  • How do I record for more than 15 minutes at a time?

    I notice that when I start recording there is a 15 minute countdown and then the application starts making overviews of each track and stops recording. I want to be able to record a live 2 hour concert with Logic. Please tell me there is a way to extend a recording beyond 15 minutes. If it can't be done I am going to kill a saleman at Guitar Center for selling me this instead of the ProTools system I was going to buy.

    LOL me 2! But Donald's not wrong, is he?
    Sometimes I set my record limit deliberately to a low number (like 4 minutes on a 3.5 minute tune) so that I can walk away, let Logic do it's thing (like record an external MIDI part) and go get a cup of coffee or something in the meantime. When I come back I trim the part (key commands, yay!) and I'm good to go. Sometimes I feel it's worth the tiny bit of extra time it takes me to trim the part after the fact than babysit a part as it's going down.
    Kenneth, I'm really sorry to hear that you may have lost a gig because of this situation.

  • My wifi wasn't working for more than 10 minutes at a time after updating to IOS8 and resetting network settings. I turned off google drive, turned off Bluetooth, reset network settings and rebooted my iPad4. So far so good.

    I have an ipad4.  Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?

    Hi CollinGCC78,
    It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
    iOS: Troubleshooting Wi-Fi networks and connections
    Regards,
    - Brenden

  • My 3gs won't hold a full charge for long, and also won't stay in any ap for more than 2 minutes and shuts down. I have replaced the battery, same symptoms. Any ideas out there?

    My iPhone baffles me. It started doing this and I was told it was the battery, so I replaced the battery. Nope, same issues. Here they are. After a full charge which takes only about an hour, it rapidly loses power after another hour or so. While in my apps, I can keep them open for maybe 2 minutes and they shut down. When I do the double tap to see whats running, the apps I opened are, however they are't. Wierd stuff here folks I hope someone has had this before and can help me out. I don't have a job and cant' afford a new phone.
    thanks for help in advance.

    Double-tapping the home button does not show apps that are running.  This is not a task manager, it is merely a list of recently used/accessed apps.
    Basic troubleshooting of the device is reset, restart, restore.  Has a reset or restore been tried?
    Check to see if updates exists for the apps, this could be a simple issue of a badly coded or buggy app that needs to be updated.

  • Ipod nano not playing audiobooks for more than one minute at a time

    Does anyone know how to fix this problem?  I stopped using it after I couldn't play an audiobook for more than a minute before it stopped.  A friend thought she had fixed it, but I downloaded another audiobook to the ipod nano and it did the same thing...played for a minute and then turned off.  I want to take it with me on a 8K walk, but it is discouraging.

    No there is no multi-select for creating SQL-Loader scripts.
    You can either create them separately or create them all and
    then discard the one you do not need.

  • Can you make a movie for more than 2 minutes on an ipad and save it on a flash drive

    Can you make a movie for more than two minutes on the ipad and sve it on a flash drive using windows XP

    Using Apple's camera connection kit, you can use a flash drive to IMPORT photos and videos. However, you can't EXPORT any type of file to the flash drive.
     Cheers, Tom

  • System.log shows (every 3 minutes): no valid selfIDs for more than 2 min

    Besides having to live with A LOT of USB 2.0 problems since the upgrade from 10.4.6 to 10.4.7 (like may other people reported) I also noticed a lot of errormessages in /var/log/system.log, that have to do with the Apple 6 port Firewire/USB2.0 PCI card.
    When starting up the system a line gets written that says like:
    Aug 3 18:08:44 localhost kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI now active, GUID 0030bd05 18000d15; max speed s400.
    Then, when the machine is properly running the log continues:
    Aug 3 18:11:34 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
    Aug 3 18:14:46 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
    Aug 3 18:17:57 server kernel[0]: FireWire (OHCI) VendorID 10b9 ID 5253 PCI: no valid selfIDs for more than 2 minutes after bus reset.
    etc. etc. etc.
    That is about 1 line every 3 minutes.
    I only have 3 USB2.0 drives connected to my 6 port card, no Firewire devices!
    After trying all suggestions found on the Apple-site I simply kept getting these errors until: I plugged in a 'Target-Disk-Mode' PowerBook over a Firewire cable. Then the errors stopped showing up and the interface appears to be happy. I can even remove the PowerBook from the Firewire port now without getting any errors!

    So, a workaround is to (temporarily if you wish) connect a Firewire-disk to the card. That will stop the errormessages from showing up.
    The solution has to come from Apple. Empty Firewire ports should be allowed to 'not send any valid selfIDs' ever...

Maybe you are looking for