Every time that i click somewhere "ads by name" pop up!PLZ help me . i done everything and still ads everywhere.

i downloaded like every anti - malware/adware/spyware and none of this found the problem. they are all saying that my pc is ok! i also used avg and bitdefender antivirus. i found that "ads by name" is my problem and that is very bad and that i have to delete it by control panel/uninstall programms but i can't find it there.
firefox is full by ads and pop ups in about 3 seconds(2-3 ads and pop ups in every click i make)
i hope you know something more
looking forward your answer
thank you in advance
P.S. please,excuse my english

These unwanted ads are injected into web pages where they don't usually appear? The most likely culprit is a bad add-on.
Here's my suggested procedure for tracking down and cleaning up bad add-ons and other ad injectors. I know it seems long, but it's not that bad.
(1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
(2) Open Firefox's '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click '''Plugins'''. Set nonessential and unrecognized plugins to "Never Activate".
In the left column, click '''Extensions'''. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
(3) You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.
Success?

Similar Messages

  • Okay every time i plug my ipod up to my laptop a message comes up and says one of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. Can someone plz help me ive done everything.

    I really need assistance/help with my ipod because it was working fine one day. Then the next day i decide to put more music on it then this message came up, and ive tried all the troubleshooting stuff and different links to help but still no success. But theres one thing i havent tried yet someone told me to buy another Apple charger and wall plug in to see if that works other than that i need help because i went to settings and erased everything off my ipod to see if that worked and it didnt so all my stuff is gone....Yeah i was ****** but plz help me!

    I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized.  Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
    Hope this helps

  • Why is it that every time that I click on Firefox to log on, I get a message saying that there was a problem loading page and that the website doesn't exist?

    When I click on the Firefox icon, I get a message saying there is a problem loading page.

    Can you try to update to Firefox 18?
    *Help > About Firefox
    *https://support.mozilla.org/kb/update-firefox-latest-version
    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • Safari opens a new tab, randomly from history every time I am clicking on something on my opened safari page!

    I have a mac book pro and my os x is 10.9.5 is updated. I use safari 7.1 ( the last updated version) , firefox and google chrome. It is a few days that I have the problem of opening an unwanted new tab from history ( just random but usually mac cleaner) automatically every time that I click on my opened page! Now I see that this also happened in firefox and chrome. I have tried, un-installing extensions, clear history, reset safari/chrome/ firefox... But the problem is not solved. I am really confused! I see many adds in every page I open too. which I did not see before this.  I appreciate if anyone can help me get rid of these unwanted tabs!

    There is no need to download anything to solve this problem.
    You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine item from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Every time I try to sign on, I only could type USER ID but I don't see any place I can type in password.  It leads me automatically click on sign on, then it is always error message that I had wrong ID or password or if I forgot.  I didn't forget my passw

    Every time I try to sign on, I only could type USER ID but I don't see any place I can type in password.  It leads me automatically click on sign on, then it is always error message that I had wrong ID or password or if I forgot.  I didn't forget my password.  I have problem to see the place where I should type in password.  There were not around sign on screen.  Where is it?

    Have you tried this: My Verizon Forgot Your User ID

  • I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. Can someone resolve this problem.

    I am updating iphoto 9.1 to 9.3 and every time when I clicked for update aps store asked to open it in the account where you purchased. I am using the same account and its available in the purchased item of this account. But in my purchased item library it indicates that you update iPhoto. I am not sure which account the aps store asking. Can someone resolve this problem.

    Contact App Store support. They're the folks who can help with Account issues.
    Regards
    TD

  • I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another.  Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please

    I accientally synced my iPhone to 2 different computers. Now my older apps are on one computer and new apps are on another.  Every time I try to sync all apps on one computer it takes the other apps of and just syncs what is on that computer - Help please
    I cannot for the life of me figure this out.

    What you need to do is connect your phone to iTunes but do not click sync.  Go to File at the top and click transfer purchases from phone, that'll put all your apps into iTunes.  When it's done transferring, locate your phone on the sidebar and click it.  Then find the apps option above the picture of your iphone, you can select which apps you want or don't want on your phone.  After selecting your apps then you can sync.  Once you do this you should never have your problem anymore.

  • Every time I right click on an image and select Download image Firefox crashes . I have reinstalled; uninstalled and deleted folders and then reinstalled; added

    Every time I right click on an image and select Download image Firefox crashes . I have reinstalled; uninstalled and deleted folders and then reinstalled; added no plugins; checked I can DL the same images in IE-works good.I use Win7 pro and it works in other profiles in Windows 7. I created a new profile in Windows and that worked for about 2 months and now that has gone the same way as my admin profile has done. I deleted the sqlite download file-still same prob..Please help. I use Firefox 13.0.1

    That sounds very frustrating.
    By the way, does it say "Download image" or "Save Image As"? Just checking whether you have an add-on downloader in the mix that might be relevant. If you do have an add-on, try using the built-in command.
    Do you also crash if you save from here:
    right-click page > View Page Info > Media tab > (select image) > Save As
    I assume you have seen this article and tried these things: [[What to do if you can't download or save files]].
    Have you tried the new Reset feature in Firefox 13? This duplicates certain key data from your active settings folder into a new one, bypassing some add-ons and custom settings. Your plugins will still be active, but could be disabled manually if you like.
    More information in this article: [[Reset Firefox – easily fix most problems]].
    If the new settings folder has the same problem, you can switch back if you like using Firefox's Profile Manager.
    Does it make any difference?

  • Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

    Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

    Is the disk cache and the memory cache enabled?
    You can check these prefs on the about:config page.
    * http://kb.mozillazine.org/browser.cache.disk.enable
    * http://kb.mozillazine.org/browser.cache.memory.enable
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    Your More system details list shows two outdated Flash plugins that you should remove and update to Flash 10.1 r102 or at least remove 10.0 r45 and wait until your distribution offers a 10.1 r102 update.
    # Shockwave Flash 10.0 r45
    # Shockwave Flash 10.1 r85
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Every time that I try to print a page from the internet, my Mac crashes and I get a "Crash Reporter" icon.  Any suggestions?

    Every time that I try to print a page from the internet, My Mac (Maverick 10.9.4) crashes and I see a "Crash Reporter" icon.  Any suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Every time I try to uninstall firefox a window pops up and says that a previous upgrade was unsuccessful and I need to reboot. I have rebooted several times, I

    every time I try to uninstall firefox a window pops up and says that a previous upgrade was unsuccessful and I need to reboot. I have rebooted several times, I have downloaded a "fresh version" and installed it. It won't uninstall. Someone please help!!

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Rhythmbox freezes every time when I click on "Radio"

    Hi guys
    I noticed that rhythmbox would now freeze every time when I click on the "Radio" option on the side pane. The freeze means that rhythmbox loses response, and top tool shows that it occupies 100% CPU usage and more than 60% MEM. Besides, if I scroll the playlist, it may also free like this randomly.
    I tried run it in gnome-terminal and want to see some error output, and got nothing. Anyone using this application has encountered the same problem?
    Thanks sincerely.

    well, after cleaning configuration files, rhythmbox works for some time. But now it freezes again, I don't know why. Is there a method for me to track this application?
    Since rhythmbox playing audio just fine even when its UI freezes, I run this from terminal didn't give any useful information.
    By the way, now it's not just freezing when click on Radio item. But it would freeze every time when I second click on any items after running.
    Last edited by leeyee (2010-02-11 13:23:34)

  • Every time that I want to go full screen with an enbedded video firefox freezes and doesn't expand

    Every time I try to go full screen with an embedded video or video game Firefox freezes and stop working

    1. Update firefox to the latest version 2. and disable real player in menu->addons->plugins.
    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    Please tell us if this helped!
    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Spinning beachball every time I r-click a file

    So, this issue is with my computer at work. I normally wouldn't come to the support forums for work-related issues, but our IT support here only know PC's.
    Here's the problem: Every time I right-click on a file, I get a spinning beachball for 2-3 minutes.
    Here are some other system specs:
    2yr old Mac Pro
    2 x 2.66 GHz Quad-Core
    12 GB RAM
    This only began happening after IT had me install and run some 3rd party optimization/fix-it utility called "OnyX"--ironically to try and solve another issue (which it didn't). Ever since I ran that program, I've had this spinning beachball problem.
    This is so frustrating, because I never have these types of problems with my own, personal Apple products at home. I wish... WISH... they would hire IT staff here that know how to NOT eff up our Macs... but that's a personal rant for another day.
    Thanks in advance!

    They and you shoud know before tinkering to have multiple backups and how to repair a system. Whether Windows or a PC, whether chkdsk or fsck or booting from system DVD.
    Two years ago all Mac Pro came with 10.6.0 as of sept 2009.
    Onyx is not really for fixing and the OS forum has more than a couple people that had the same bad luck using Onxy and other cleaning programs. They can and will do more and have a lot of features. Knowing which to use when. In he past "Applejack" was darn easy and safe to use.
    Safe Boot
    Repair from DVD
    Clone system to another drive and repair and test booting there (do safe boot also first time)
    Then tell us and focus on the underlying issue you began with - but don't mention.
    External devices, drivers, an update or install.
    As for 2009 Mac Pro there is/was a bug in audio, that affected all models and iTunes as well, and was never issued for 10.5.8 users, only for 10.6.2 and above. So you really should look at getting it - a clean install on a new drive. Maybe that is the direction to take.

  • Have downloaded FF 7.0.1 twice- still get message every time that I should up grade?

    Have downloaded FF 7.0.1 twice- still get message every time that I should D.L. the new version- what am I missing?

    Your UserAgent string in Firefox is probably messed up by another program that you installed.
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter <br />
    ''If you see the warning, you can confirm that you want to access that page.'' <br />
    Filter = '''general.useragent.extra.firefox''' <br />
    Right-click that preference and select '''Reset''' <br />
    Then restart Firefox

Maybe you are looking for

  • I am in need of a new dvd player HD Blu-Ray and best buy is telling me that I need at least 10Mbps.

    Hi Niel, I am in need of a new dvd player HD Blu-Ray and best buy is telling me that I need at least 10Mbps. Where can I find this at my computer before I purchase this item. I hope you can help me. I have the 24 inch iMac. Denise <Subject Edited by

  • Windows Media Player Never Works

    Hey folks - Looking for WMP help. I've downloaded it, trashed the three preferences I've read about here, and it still won't work. For some reason, it plays Windows Media files I have on a CD I made a year or two ago on my old PC, but it will not pla

  • Assigning movement types to a t-code

    Dear Experts,    Are movement types automatically associated with t-codes? or are they assigned?. If movement types are assigned to tcodes, how is this done? For example, several movement types can be accomplished with tcode mb1b, are these standard?

  • Installing new Drive questions(partitioning, journalling...)

    I am installing a new internal drive(500GB) and have a couple questions. I am a heavy Photoshop user. I have an external 150GB FireWire drive currently as my Primary Cache. The new Internal Drive will be taking all my working files from the original/

  • SEM-BCS - Copy Task

    Hi When i execute copy task to copy the data from one version to another. the system is applying wrong currency transalation. example source version is 500 GC - INR Target version is 700 GC - USD Issue is coming when in the target one of hte consolid