Every web page I try to open says "can't find server" I refresh and eventually it comes in sometimes in pieces.

99% of the time a website will not open and I get the message "can't find the server" even happens with Mozilla when I click on help. If I use the refresh button usually the web page will eventually load sometimes it takes multiple clicks on the refresh button. Many times only parts of the page load and I still have to use the refresh button to get the whole page loaded.

See [[Error loading web sites]]
Out of date plugins can also play a role, so update the following:
#Flash via http://get.adobe.com/flashplayer/
#Adobe Shockwave For Director via http://get.adobe.com/shockwave/
#Java via http://www.java.com/en/
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Similar Messages

  • Connected to the internet but browser says 'can't find server'

    Hi,
    I have an Apple Airport Extreme and it has been working well for a long time. My husband and I both run our internet connections from it wirelessly. Recently, when we go to connect to the internet, the browser says 'Can't find Server' but the Airport status bar says we are fully connected to the internet with a strong signal. I have no idea what happened or what is going on. The only thing that we have done differently is update the firmware on both our computers, and it seems as if this problem has started around that time. Any suggestions would be greatly appreciated. Thanks
    April

    It might be a good time to perform a complete power recycle of your network components to make sure they are "talking" to each other properly and see if this resolves the problem.
    Please try the following:
    o Power-down the modem, AirPort Extreme Base Station (AEBS), and computer(s); wait at least 15 minutes. Order is not critical.
    o Power-on the modem; wait at least 10-15 minutes.
    o Plug-in the AEBS; wait at least 5-10 minutes.
    o Power-on the computer(s).
    Can they access the Internet now?

  • Firefox does not load web pages; it always says 'can't find server' on every page I try to load

    Firefox 'can not find server' reply comes up on every page I try to load, including my home page. I have to retry or refresh 3-4 times before it takes.

    Sounds like a proxy server issue.  Go to System Preferences... > Network
    Select the AirPort from the left hand side
    Click on the Locations combo box and select "Automatic"
    Click on Advanced
    Select the AirPort tab and enter your network name
    Select TCP/IP tab. 
    Configure IPv4 Using DHCP
    Now click on Renew DHCP Lease.  After a few seconds you should get an IP address (probably 192.168.x.x)
    Click on Proxies tab.
    Select Auto Proxy Discovery and Use Passive FTP - de-select all other options.
    Click on OK and Apply, etc.
    Bob

  • I have iTunes on my mac and am trying to play it through my Sonos but it is saying can't find server

    I have a mac which has itunes on it.  i also have a download from Sonos. When I try to play throuigh Sonos it says it cannot find server.
    my itunes lirbraryu scomes up on my sonos page
    can you help me please.

    No, in order to apply a layer style you must simplify the text, which makes it into a bunch of pixels. You can't edit text after applying any layer style.

  • Says can't find server when i try to accept invite to an event

    When I am emailed an invite to an event I am getting an error saying it can't find the server when I accept and try to add to my calendar.  Any ideas on how to fix this?

    Install the free VLC player and use that.
    http://www.videolan.org/vlc/download-macosx.html

  • View/Resolution/Font is incredibly small resulting in web pages not displaying properly (Facebook) & I can not find internet tools options or compatibility view otions

    I've tried different things to adjust this problem on my laptop, but nothing is working. I uninstalled firefox because this was very irritating. I just reinstalled after being away for 2months and the problem still exists. My laptop settings are for normal display and font sizes and everything is normal when I use internet explorer, but when I use firefox...everything shrinks. When I'm on facebook using apps...it gets even smaller and app screens will not display properly. There is no internet options or compatibility view settings on this new firefox that I can find and I'm out of ideas on how to fix this.

    See this: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom
    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll     Then I get ERROR 7 (windows error 126)   I tried reinstalling iTunes but that did not help. Please Help Me!

    I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes   Error 7 (Windows error 126)   Please Help me!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99623)

  • Every single web page I go to opens immediately except for Facebook.. my computer is brand spankin new?? any ideas?

    Every web page I go to opens immediately except for Facebook.. my lap top is brand spankin new... any ideas what it could be.. I use wifi..all my lights are green showing services???

    Parental Controls enabled in System Preferences > Parental Controls  ??

  • Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

    Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

    This could be a complicated problem to solve, as there are several possible causes for it.
    Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
    Step 1
    From the menu bar, select
               ▹ System Preferences... ▹ Date & Time
    Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
    Check the box marked 
              Set date and time automatically
    if it's not already checked, and select one of the Apple time servers from the menu next to it.
    Step 2
    Start up in safe mode and log in to the account with the problem.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
    Step 3
    Triple-click anywhere in the line below on this page to select it:
    /System/Library/Keychains/SystemCACertificates.keychain
    Right-click or control-click the highlighted line and select
              Services ▹ Show Info
    from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
    Repeat with this line:
    /System/Library/Keychains/SystemRootCertificates.keychain
    If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
    Step 4
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
    In the Keychains list, there should be items named System and System Roots. If not, select
              File ▹ Add Keychain
    from the menu bar and add the following items:
    /Library/Keychains/System.keychain
    /System/Library/Keychains/SystemRootCertificates.keychain
    Open the View menu in the menu bar. If one of the items in the menu is
              Show Expired Certificates
    select it. Otherwise it will show
              Hide Expired Certificates
    which is what you want.
    From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
              Secure Sockets Layer (SSL)
    select
              no value specified
    Close the inspection window. You'll be prompted for your administrator password to update the settings.
    Now open the same inspection window again, and select
              When using this certificate: Use System Defaults
    Save the change in the same way as before.
    Revert all the certificates with non-default trust settings. Never again change any of those settings.
    Step 5
    Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
    Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
              Help ▹ Keychain Access Help
    from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
    Step 6
    From the menu bar, select
              Keychain Access ▹ Preferences... ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL.
    Step 7
    Triple-click anywhere in the line of text below on this page to select it:
    /var/db/crls
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
    Restart the computer, empty the Trash, and test.
    Step 8
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in the same way you launched Keychain Access.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    fe80::1%lo0                    localhost
    If that's not what you see, post the contents of the window.

  • NONE of the web pages load properly. If I hit "Ctrl + F5" it will fix THAT PAGE ONLY. I have to do this to EVERY SINGLE page I try to load. This ONLY happens with FIREFOX. Internet Explorer works fine. PLEASE HELP! Thanks.

    NONE of the web pages load properly. If I hit "Ctrl + F5" it will fix THAT PAGE ONLY. I have to do this to EVERY SINGLE page I try to load. This ONLY happens with FIREFOX. Internet Explorer works fine. PLEASE HELP! Thanks.

    To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
    Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

  • Won't open homepage on open, won't open web pages from the menu 'open new window', Can't open menu button

    Ok, since update to version 31.0, I have been having some problems.
    I have tried doing everything stated in the support page about resetting, reinstalling, safe mode, restarting pc etc.
    First problem, when I open Firefox no web page loads. It just says New Tab and a blank white page. If I press the home button I am taken to my homepage which is google.
    Second problem, when I right click on a link and the menu pops up, if I click open in new window, a new window opens but it just says New Tab with a blank page and no URL information, just blank.
    Third problem, the Open Menu button just doesn't work at all. You can click all you like, that thing is not opening.
    I am really stuck as to what to do. I have only been using Firefox for about a month and t was good until these problems. If I can't resolve it, I will have to use another browser as it is really annoying.
    I am using Windows 8.1 by the way and have scanned my computer thouroughly for both virus's and malware.

    Hi zenithtwc, to test whether this is a settings issue, could you do a three-minute experiment?
    '''Create a new Firefox profile'''
    A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
    Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
    firefox.exe -P
    ''Don't delete anything here.'' Any time you want to switch profiles, exit Firefox and return to this dialog.
    Click the Create Profile button, assign a name like Test731, and skip the option to change the folder location. Then start Firefox in the new profile you created.
    Can it reach the internet?
    When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

  • Safari 8 Cuts off the top of every web page

    Ok, so I'm looking for a solution or I want to know if other people are having the same problem so hopefully apple will fix it.
    As my title says, Safari 8 in Mac OS X Yosemite is cutting off the top of every web page while in full screen. Not just a few, every single one, and it only does it in full screen. It only started after I updated to Mac OS X 10.10.1, it was fine with the original release of 10.10. Any takers?
    Thanks,
    Chris

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • My mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do didi any has same issue?

    my mail app on I phone 4s crashes every time when i try to open, and i can see it thru the setting>general. also phone is overheating and spending battery fast. does any one has some answer on this or same issue? what to do did any has same issue? if i do an complete phone restore what will hapend ?

    You can call Verizon to replace it or go to an applestore to replace it since it won't even power on with multiple chargers.

  • I was today invited to upgrade my iTunes when I logged on.  Update failed. Every time I now try to open iTunes I get error messages.  Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126"

    I was today invited to upgrade my iTunes when I logged on.  Update failed. Every time I now try to open iTunes I get error messages.  Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.

    I too had this problems (Windows 8.1).  A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
    Today I fixed the problem by:
    Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
    Uninstall ALL Apple Software using Control Panel / Programs and Features.  I uninstalled:
    iTunes
    QuickTime
    Apple Mobile Device Support
    Apple Application Support
    Apple Software Update
    Bonjour
    Delete the folders:
    C:\Program Files (x86)\iTunes
    C:\Program Files (x86)\Common Files\Apple
    Restart the computer
    Reinstall QuickTime
    Reinstall iTunes
    Everything works GREAT now, including the iTunes store.  You will not lose your media files, I got everything back, all my settings, playlists, etc.

  • TS1967 Every time that I try to open a video the program is forced close.  Any ideas?

    Every time that I try to open a video in iTunes, the program is forced close.  Any ideas on how to rectify the situation?

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Maybe you are looking for

  • Coding mode issues

    I have noticed a few annoyances with Dreamweaver in coding mode. Dreamweaver allows you to drag elements (like images) out of the file panel, but when you enter the code pane, the arrow and icon are so large, that it is difficult to see the insertion

  • Error "ASSIGN_SUBSTRING_NOT_ALLOWED" doing archiving

    Hi  everybody I have an ECC 6.0 SAP System and I m trying to implement an archiving process for the MM_MATBEL object. I am using the SARA transacction --> Basis Customizing --> Cross-Client File Names/Paths I defined a logical file path definition "A

  • Bytes read from Socket buffer

    Hi, I'm writing a proxy application that relays data from a server to a client that requested the data. One thing I have observed is that when I have read about 32136 bytes of data, my reads from my buffered input stream fetch only one byte at a time

  • Resource search based on Customer and Project role type

    We are using cProjects 3.1 with WFM core and SAP ECC 5.0 We have been able to search for resources (created as Business partners) based on Org Unit, Qualifications and also Availability %. But while searching in the General tab, if we enter the Custo

  • Problem of Starting Sun Application Server

    Hi, I just downloaded j2eesdk-1_4_02_2005Q2-windows.exe to my windows machine and insatlled it. When I started the verifying of Server by going to "Start menu, choose Programs -> Sun Microsystems -> Application Server PE-> Start Default Server", I di