Every Year we dicker over internet price

Isn' there a reasonable price for a mid range internet that last year after year without having to call em up and beg for a lower price that only lasts a year. I started out at $24 bucks a month then the next year it went up to $31 buck a month now today I got my bill $48.57 bucks when will it all end? I am disabled and rely on my internet alot but also being on a fixed income there is no compassion and no set price from year to year seems I can get cable internet for $52 bucks a month ...Guess it is time to say good bye to AT&T I have had for close to 12 years

Hello, !
Thanks for posting. We would be happy to review your account and discuss some options, so please click here to send us a private message with your contact information, the best time to reach you, and a brief summary of the issue.
You can expect a reply within two business days, so keep an eye on the little blue envelope icon in the top right corner of your screen. In the meantime, feel free to message me with any other questions or concerns.
-Mariana

Similar Messages

  • Could you please let me know that do I have to afford to the price of Indesign CS6 Server every year during my usage or one time when I purchase it?

    Could you please let me know that do I have to afford to the price of Indesign CS6 Server every year during my usage or one time when I purchase it?
    Thanks,
    Ming

    This forum is not staffed by Apple.  It is a dialogue with other iPhone owners. 

  • Price increase every year

    Hi All,
    We have a requirement where in a contract the list price of an item needs to increase every year by 10%. This could be every year for 10 years or just every year as long as the material is active in SAP. Also within the year there should be price protection which means the List price cannot be changed. Is this possible partly or completely in Std sap?
    Thanks,
    Rashmi

    Hi Rashmi,
    I understand you have 2 scenarios here
    1. Within a year , the price will remain same
    2. after every year, the price should change by 10%
    Since it is a very long term that you are talking here ( 10 years or till the material exist), there can be 2 methods of doing it.
    1. Since you know the list price starting today (which will remain constant throughout year) and also the next year's mark-up is also known i.e. 10%
         so go to VK11, make the list price entry as below
    Material
    amount
    Start Date
    End Date
    A
    120
    01-Jan-14
    31-Dec-14
    A
    132
    (120+10% of 120)
    01-Jan-15
    31-Dec-15
    A
    145
    (132+10% of 132)
    01-Jan-16
    31-Dec-16
    A
    160
    01-Jan-17
    31-Dec-17
    A
    176
    01-Jan-18
    31-Dec-18
    A
    193
    01-Jan-19
    31-Dec-19
    A
    213
    01-Jan-20
    31-Dec-20
    So like this you can do this 1 time activity and your requirement is done.
    2. The other method involves ABAPing.
         You make an entry of list price (currrent) in VK11 valid for next 10 years
         in the pricing you assing a Z-formula to the Condition
         this Z-formula will calculate the year (based on the Sys-date and the condition start date) and apply the 10% markup accordingly.
    I suggest you go with option 1, it seems very childish but it is 100% standard with ZERO possibility of BUGS !!
    -Cheers,
    Sachin.

  • Doomed to purchase a new Apple TV every year?

    I purchased an Apple TV in Germany a little more than one year ago, and brought it with me to Malaysia, where I currently live. It just stopped to work, and I cannot find any support in the Apple Support topics. My wireless network at home works just fine, but the Apple TV refuses to connect to it. After unplugging it, it tries to set the date and time for minutes, then switches off. It does not even recognize the remote's signals.
    As Apple TV is not distributed (therefore not supported) in Malaysia, and because the warranty period just ended, am I doomed to purchase a new one? Is this supposed to happen every year? I understand that its unit price is not very high, but it will be costly over the years. I must say that I am quite disappointed by Apple this time (after purchasing 2 iPods, one iPad, one iPhone and the latest iMac).
    Regis H.

    Any code association only applies to 1st gen Apple TV.
    Again, the remote app will need home sharing enabled on the APPLE TV. They also need to be on the same wifi network. The OP has a new network.
    Using unsupported apps or modified devices are not permitted for discussion here.

  • Is there a way to have a Chicken of the vnc type GUI over internet in ARD3?

    Hello, to whoever reads this question, thanks in advance if you can help.
    My need is this. I regularly use Chicken of the VNC for multiple administration over the internet, but what I like is the possibility to have same IP but Multiple clients with fixed IP (local) behind Firewall, i.e. x.x.x.x:5910 x.x.x.x:5920, x.x.x.x:5930, etc. and i can connect at the same time to the different machines to admin them.
    Question: Is there any possibility to have the multiple connections with ARD 3 or even ARD 2 over the internet with same IP?
    At one point ARD 3 did work for me like that for about an hour and then it stopped, blocking out 2 of 3 machines in the same IP. I mean, it acutally let me have 2 windows open on the same IP with different ports over internet and was flabbergasted, but then it stopped! when I quitted and restarted, I could do it no more…
    I really like ARD, but if I got to manually change the port everytime I log in… yikes…!! I admin 20 machines in 10 different locations, so everytime i gotta log in to machine 'a' then change ports to machine 'b' for 10 locations everyday… well I hope you get the idea.
    BTW i tried looking all over the forum, but could not find this info specifically.
    PS thank you for your time

    I, too, was a bit bummed out by the lack of this feature. I wondered if ARD 3 had some sort of mode Apple themselves used "silently".
    There IS a way to make it work, however -- via VPN. I discovered that once I used VPN into my company's intranet, ARD 3's scanner could see EVERY Mac in the company.
    Setting up a VPN nowadays is pretty simple -- many routers handle the support for you. OS X's Internet Connect feature makes it trivial to connect to the VPN, once it is properly set up from the inside of the company.

  • Copy oracle server data to remote system over internet

    Hi,
    I am using Redhat 4 linux system as Oracle 10g server. My database is in archivelog mode. I am not good at data guard so i am not using it.
    But i want to copy my archive log file to another linux system over internet. so that in case of server crash i can recover my database using backup and archive log files.
    It will be best if i can do it at each archive log creation like data guard and ok if it do at a time interval
    Please suggest me any tool which can copy data over internet on linux system and it should be free or easy to use.
    Thanks
    umesh

    Hi,
    I am using Redhat 4 linux system as Oracle 10g server. My database is in archivelog mode. I am not good at data guard so i am not using it.
    But i want to copy my archive log file to another linux system over internet. so that in case of server crash i can recover my database using backup and archive log files.
    It will be best if i can do it at each archive log creation like data guard and ok if it do at a time interval
    Please suggest me any tool which can copy data over internet on linux system and it should be free or easy to use.
    Thanks
    umeshOne tool I can suggest is OS copy command.
    I used to use this tool for one of our server which was on SCO Unix with Oracle 7. But there are implications with this:
    1. The archives got corrupted frequently during copy, then we need to identify the archives by matching it's size on production and on standby and copy it once again.
    2. Manually recover the database after every 15 minutes.
    I would suggest to go for oracle managed setup i.e. Standby configuration. It's not tough.
    Regards,
    S.K.

  • MPD over NFS which is not on LAN but over Internet

    Hello,
    I tried MPD on a raspberry pi and a NFSv4 mount over vpn over internet.
    Suffice to say, I was surprised when I saw mpd actually attempting to *read* one and every file in the huge 500GB repository. What the hell. Why does it need to "read" in the whole file??
    Is there an alternative to mpd with similar capabilities, that doesnt suck? Or should I run mpd on the main server - but how do I then get the sound/mp3s to the raspberry pi?

    HiImTye wrote:
    you could do library updates from the NFS server and save the library info to the NFS share, then point your MPD server you use to listen on to those library files. then you don't have to struggle with network speeds on updates.
    but this does make me curious why it is reading the entire songs. it could just be that you have a lot of songs so that it seems like it is? idk
    I scp'ed over the database file from main server which had indexed/updated the db with about 80k songs.
    Then mounted the nfs share to the rasperry pi to the same absolute paths as on the main server (why not).
    This works fine, I see only the songs that I play are transferred quite fast, playing is almost instantenous, and they seem to be cached somewhere. Seeking within files is also fast, especially once already played.
    Now as you say, the database file needs to be kept in sync between the NFS server and raspberry, one way would be to put it as well in some nfs share, or sshfs or whatever, or even cronjob it with rsync, since I wont be doing database updates/adding albums that often on the main server.
    Would be good if something like this was documented somewhere. Like the wiki. And an option in mpd to ignore update commands to its database - thats now dangerous - it does read all the files, and even if it only tries to read headers - for some shares such as 1 or 2TB of songs, thats too much. Now the mpd on rasperry is more of a proxy.
    So yes, this does work now, the slight downside is that the android client mpdroid is not that good - it doesnt respect volume keys when not in view'and such, but one can live with that.

  • ARD 3.2.1 over Internet only Screensharing instead of full administration

    I have an OS X 10.3.9 Server, running ARD Client 3.2.1, it should be remoted over Internet
    I have an OS X 10.4.11 Server, Running ARD UNL 3.2.1, this is the Mac that remotes the others
    I have some other OS X Server and normal machines, Running ARD Client 3.2.1, they are remoted over the local lan.
    Remote Desktop in the local lan is running fine and without problems, but If i try to remote the 10.3.9 Server that runs ARD 3.2.1 (it is only available over internet), ARD says that only screen sharing is available, no full access... The internal Server-Firewall of the problem 10.3.9 Client i have shut down and in the Router where the 10.3.9 Client is connected to, i do forward the Ports
    5900 TCP/UDP
    3283 TCP/UDP
    5353 TCP/UDP
    5988 TCP/UDP
    5432 TCP/UDP
    5989 TCP/UDP
    to the local IP adresse (Client has a fixed IP-Adress) of the client.
    If i forward all Ports in the router in the lan where the 10.3.9 Machine is in to the 10.3.9 Client, i have screen-sharing only and no full access.
    New installation of the machine, same problem....
    Same Problem if i use ARD 2.2 instead of 3.2.1
    Any help?

    My router does not seem to be the problem as it works very well with other wireless devices. To be on the safe side I left my modem/router unplugged for over 2 hours. The problem also doesn't seem to be with my AirPort Extreme card as I am constantly connected to my network at full speed.
    I recently just created a new account and was able to download and install 10.5.6 without interruption. It seems I only experience downloads timing out on my main and only account. Web browsing seems to be fine until moments after I start a download. The download will begin to download and then time out. Also, at this time pages fail to load. After a few moments I can then reload my download only for it to time out once again.
    I tend to keep Safari clean by using the "Reset Safari..." option after every use. I just hope my only solution is not creating a new account every time I plan on downloading a file.

  • Apple tv movie rental keeps pausing as if buffering every few seconds, started over and now says to lower the video res, what is up

    apple tv movie rental keeps pausing as if buffering every few seconds, started over and now says to lower the video res, what is up

    Thanks for the pointers folks. Yeah, 1.5GB is pretty poor isn't it? There are other suppliers, but you have to get a their phone line installed to access the internet so it's an £85 setup fee plus a day off work for a guy to come round and drill a hole in your wall before you even get to the monthly costs.
    Don't get me wrong though - I'm certainly not an Apple basher, but am equally frustrated with both them and the ISP.
    Virgin Media spend all kinds of money advertising their broadband as the fastest in the UK, but don't tell you (up front anyway) that you'll be cut off if you actually try and use it.
    Apple on the other hand carry on with their 'it just works' mantra, but with Apple TV this only applies if you meet certain criteria (again, not mentioned up front).
    I guess it aint a biggie, as i was gifted my Apple TV, and love all the other stuff it does, but from the number of posts on this forum can see that there's a lot of angry customers out there who want explanations as to why they're having similar problems to me.
    Will be very interesting to see if Apple release any kind of software update that turns the flash drive from a buffer to permanent storage, to at least ease some of the pain...
    Message was edited by: McGinty

  • Every time it rains my internet goes out!!

    Ever since we got Comcast about a year ago, every time it rains my internet gets slow or stops completely. Also my cable becomes pixelated on random channels, it has become extremely annoying but i would rather not pay $30+ for someone to come fix a problem that isn't my fault.

    Hi,
    Had the same problem in two different cities. 1st city... neighbor cut the cable wire sheathing when installing their sprinkler system. FIX: Had the comcast cable replaced from box to house. When inspecting old cable, noticed cuts on the wire, and probably water was getting inside and shorting the signal. 2nd city. same problem, cable underground. FIX: Had the tech re-run a cable from box to house, but this time it was above ground.When I removed the old underground cable, again, it was cut in several places.

  • Facing Problems in Streaming Video over internet using FMS 3.5

    I,am using FMS 3.5 to stream video over internet.This video will be a part of a website www.mywebsite.com . I have the webserver in my company. This webserver has the local LAN IP : 192.168.10.19 which is binded with a public internet ip 212.77.xx.xx .This website is hosted using IIS 6.0 on OS windows 2003 server with SP2
    I created a swf name sample.swf from sample.flv file and gave it the rtmp address as follows:
    rtmp://192.168.10.19/vod/_StreamingVideo_/sample.flv   (where _StreamingVideo_  is the instance on the server, and 192.168.10.19 is the LAN IP of server) ,and it worked fine and every one within the local company network could see the streaming video. Now i tried to replace this local address with the public address and the address became as follows:
    rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv
    After giving this public IP in the rtmp address i,am getting a message "Failed to load Flv from the address rtmp://212.77.xx.xx/vod/_StreamingVideo_/sample.flv" and as as result the video is not streamed and it only shows the progress bar on the link
    www.mywebsite.com/VideoStreaming/Sample.html without loading the video. I have also checked the ports 80,1935,1111 on the server and they are open. Is there any problem with my rtmp address with public IP or any other reason ??. Please help me out in this regard because im realy stuck here.

    Adding to my previous post this is the XML output i get when i try to access the fms admin console from local ip address i.e http://192.168.10.19:1111/fms_adminConsole.htm
    <?xml version="1.0" encoding="utf-8" ?>
    - <result>
    <level>error</level>
    <code>NetConnection.Connect.Rejected</code>
    <description>Admin user requires valid username and password.</description>
    <timestamp>2/3/2010 8:26:08 AM</timestamp>
    </result>
    but when i try to access fms admin console through public ip (http://212.77.xx.xx:1111/fms_adminConsole.htm) then it gives me the following :
    Internet Explorer cannot display the webpage.
    Any more suggestions Jay (because really ur the only one helping me out in this so far) ??

  • Customers running Forms over Internet (WAN)

    I am looking for customers running forms over internet (wan). I read the the customer's testimonials at http://www.oracle.com/technology/products/ids/customers/index.html but
    I didn't find any case about running forms application over internet.

    Aviana,
    Running a Forms application over the internet can be done, but there are a few things you need to consider before you do this. First, all of your users MUST be on High Speed. As Francios eluded to, Forms applications are Java Applets. Therefore, each person using the application will receive all of the Java Archive (.jar) files used by your program in order for it to run on their computer. Each time a user runs your application, the application will either download the initial set of .jar files or it must validate the .jar files that were previously downloaded to ensure they are current. This can be extreamly slow over dial-up and even on High-Speed line that are less than 256 kbps. Additionally, a user must either have the Sun Java Runtime Environment (JRE) installed our they will need to have Oracle's Jinitiator installed. Past experience showed this was a major trouble spot for Dial-up users.
    I guess the point I'm trying to make is make sure there are no better alternatives before going down this path. I worked on an application like this because management thought it was the cheaper way to accomplish what was needed. Four years later, after a lot of user complaints and a lot of time was spent supporting users, the application was rewritten from the ground up as a pure web app because it became too much to support and there were too many user complaints.
    Just a thought. :-)
    Craig...

  • Events vanished for a single month of every year

    All events in the month of October of every year ever since I started using iCal have vanished from iCal in my computer. I still have them on my iPod and am not syncing Calendars since I noticed this. How can I get every month of every year to show every event I have recorded?

    Hi,
    I have seen similar issues with particular timezones. What timezone are you using in iCal?
    John M

  • How to control and display video from IP camera using ActiveX control over Internet.

    Hello,
    I need to control my IP cameras over the internet. I need to log into the cameras and then display the video.  There's an ActiveX control registered on the computer and works fine with IE to access and control the cameras. Controlling the cameras using IE works fairly well, but there are some quirks that I'd like to eliminate by using my own custom code.
    Has anyone created a vi that controls a Foscam FI8905W over the Internet? I’ve attempted, but I keep getting a catastrophic failure when I try to call ManagementConnect Method in the DVM_IPCam2 ActiveX Control Module V1.0. I'm not sure whether I need to establish an IP connection with the cameras first, or allow the ActiveX control to establish it for me.
    Some example code would be greatly appreciated. Running LabVIEW 2011 on a Win7 32bit.  Even some code used to control a similar device using ActiveX over Internet would be helpful.

    I have an example vi for interfacing to the foscam activex.
    I plan on using mouse click events within the activex window to trigger the PT function.
    I only have the basic up/down/right/left directions and not the down-right/down-left/up-right/up-left in the enum.  You can load the camera's web page and view the source to see the Java script code that uses the activex control.  There are definitions for the other directions.
    I had to mark the control as "Disabled" to keep click events from going to the activex control.  If I double click the control, it goes full screen.  If I then click on it to get out of full screen mode the video never returns or returns to the wrong spot in the VI.
    Attachments:
    Foscam Demo.vi ‏24 KB

  • I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it

    I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!

    Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
    Mac OS X: Gray screen appears during startup
    Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS).

Maybe you are looking for