Everybody PLEASE read.... Flash Problems

People are becoming more vulnerable since they have tried
everything from UNinstalling then re-INstalling the Adobe Flash
player version 9/10/and whatever comes after this.
There are quick fixes that are not even approved by Adobe
people who really need to connect with the rest will start by
installing these quick fixes and find themselves in more disarray
than from where they started!
from what happened to my machine....
UPGRADED to SP3 on XP Media Center
the problem started the NEXT day!
at first the firefox that I used was just prompting me to
either send the problem or close the browser
few weeks passed and Firefox updated itself
and now it completely closes as if a kill broswer message has
been sent.
{that only tells me that Firefox knew about this problem and
added that patch so that whenever the browser encounters a flash
media - it crashes and closes itself
few weeks later
the little window wanting you to keep sending error message
that will never be viewed by their techs
then an issue about Windows and their permissions to run
certain softwares is not applied correctly which created this
problem...... really?
you want the normal crowd to actually know how Windows work?
the registry system?
I know a little about and I really do not want to know HOW
WINDOWS really work.
fast forward to today
a new version of Flash upgrade proved to be 0 help {flash
work like new for just about 3-4 viewings then BOOM! back to the
beginning} since I am writing this message instead of enjoying cow
tipping in Alberta on youTube {humor me folks}
the only thing working is window based media on websites
they work like charm
but the flash....
oh wait
I went back to Square 1 again. I am not frustrated anymore. I
mean I cannot fix it so I will either wait for it
or just go get a Mac

Hi 3opus-
There have been a lot of problems with XP Media Center(s) and
SP3. Go to forums.techarena.in and check it out. You can also go to
the Microsoft Support (or MS forums), but I found techarena to be
more usefull. You need to fix that problem first before tackling
the Flash Player 10 issue. Of course, you don't have to try to fix
your FP10 if you don't want to. Some of us have fixed ours, and are
just trying to help. I don't know what FP "upgrade" you found
recently. I haven't seen an update to FP10 in quite a while, but
hopefully an official one (a fix) will come soon!
I have found that things go better if you stop/pause the vid
prior to moving on to another vid or site- but you don't have to
try it.

Similar Messages

Please read my problem when I configure Weblogic https

I want to use https protocol and SSL for my web application in Weblogic
I have a problem but I am not sure it's related to configuring Weblogic or not please if you can advice me
I use "openssl" to be my own Certificate Authority (CA)
I used this instructions for using openssl [http://www.g-loaded.eu/2005/11/10/be-your-own-ca/]
after configuring openssl I used these steps for creating my keystore
1. First I use this keytool for creating my private key and public key
keytool -genkeypair -keyalg rsa -keystore ali_keytool.jks -storepass ali120 -alias ali_alias
What is your first and last name?
[Unknown]: AliKhosravi
What is the name of your organizational unit?
[Unknown]: Boors
What is the name of your organization?
[Unknown]: software
What is the name of your City or Locality?
[Unknown]: Tehranali_keytool.jks
What is the name of your State or Province?
[Unknown]: Tehran_Province
What is the two-letter country code for this unit?
[Unknown]: IR
Is CN=AliKhosravi, OU=Boors, O=software, L=Tehran, ST=Tehran_Province, C=IR correct?
[no]: y
2. I create my CSR by this command
keytool -certreq -alias ali_alias -keystore ali_keytool.jks -storepass ali120 -file ali_keytool.csr
3. I sign the ali_keytool.csr by openssl . I do it like this :
openssl x509 -req -in ali_keytool.csr -CA certs/myca.crt -CAkey private/myca.key -out ali_keytool.crt -days 365 -CAcreateserial -CAserial my_ca.seq
4.Now my I have a signed certificate (ali_keytool.crt) and my CA certificate (myca.crt)
and I import CA certificate to my keystore
keytool -import -alias Openssl_ca -file myca.crt -keystore ali_keytool.jks -storepass ali120
5. I import the signed certificate into my keystore by alias of private key
keytool -import -alias ali_alias -file ali_keytool.crt -keystore ali_keytool.jks -storepass ali120
6. I import the CA certificate again into a new keystore for creating Trust
keytool -import -alias my_ca -file myca.crt -keystore ali_keytool_trust.jks -storepass ali120
All steps done without any errors
I used this address for help [http://www.startux.de/java/44-dealing-with-java-keystores]
Now I want to configure kestores ans ssl in Weblogic
7. I go to the Environment-->Servers-->AdminServer-->Keystore tab in wblogic
8. I set "Keystores=Custom Identity and Custom Trust", "Custom Identity Keystore = H:\trust\ali_keytool.jks" , "Custom Identity Keystore Type=jks" ,
"Custom Identity Keystore Passphrase:ali120"
"Confirm Custom Identity Keystore Passphrase=ali120"
"Custom Trust Keystore=H:\trust\ali_keytool_trust.jks" , "Custom Trust Keystore Type=jks" ,
"Custom Trust Keystore Passphrase=ali120" , "Confirm Custom Trust Keystore Passphrase=ali120"
9. Then I go to SSL tab and I set "Identity and Trust Locations=Keystores" , "Private Key Alias=ali_alias" ,"Private Key Passphrase=ali120",
"Confirm Private Key Passphrase=ali120"
10. I go to the General tab and select "SSL Listen Port Enabled"
11. I user Firefox as WebBrowser so I configure my Browser I select Tools-->Options-->ViewCertificates --> Authorities tab
and I import the server certificate here is "myca.crt the openssl certificate"
in Downloading Certificate window I select
"Trust this CA to identify web sites"
"Trust this CA to identify email users"
"Trust this CA to identify software developers"
12. I restart Weblogic
13. I try to loging in weblogic like this "https://127.0.0.1:7002/console"
The webBroser show me this warning:
This Connection is Untrusted
You have asked Firefox to connect
securely to 127.0.0.1:7002, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
I Understand the Risks
I don't know why the WebBrowser show me this warning while I imported the Server Certificate
I don't know that my problem is in configuring WebLogic or FireFox WebBrowser or Keystore
If you know please advice me
Thanks

Moderator Action:
You already aked this question a couple of weeks earlier:
My problem when I enable SSL in Weblogic and I don't have a trusted CA cert
This is a user-to-user forum.
There is no obligation that anyone respond. They will answer if they choose to.
If there is a business need for a resolution, use your service contract privileges and open a support ticket with Oracle Support.
http://www.oracle.com/us/support/contact-068555.html
This duplicate forum post is locked.

Please help: Flash problem in IE9 in Vista

I am hoping to get some help with Flash and IE9 on Vista. It had been working fine, but now I only get a grey screen where the video should play. Flash does, however, play in Safari and Chrome.
I have uninstalled flash (using Adode's uninstaller) and re-installed numerous times. It says it installed correctly, but no change.
I uninstalled Flash, uninstalled IE9, re-installed IE9, and re-installed flash without any change
I deleted registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatability\{D27CDB6E......
It looked OK, but I deleted it anyway - but it didn't help
Shockwave flash object shows as an add-on and is enabled. Version: 11.6.602.171
ActiveX filtering is not selected
Security is set to mediium
ActiveX controls and plug-ins is enabled
Software rendering instead of GPU rendering is selected
Any suggestions?

Why are you "printing to pdf"? Does "Save As" yield better results?

Apple please read: Serious problem with Spotlight indexing!

My MacPro has a serious problem and I don't know what to do: Spotlight has been indexing for two weeks now, day and night. When I click the spotlight icon, the info box says that it is "calculating time", which I guess means that OSX tries to find out how long the indexing will take. Consol reports this line again and again (for the last two weeks):
"...pple.launchd(1) (com.digidesign.fwfamily.helper (10466) posix_spawnp/"/Library/Application Support/ Digidesign/fireWire/DigidesignFireWireHelper", ...): No such file or directory"
I removed Digidesign ProTools from this Mac two months ago, and I thought every files were removed. Obviously, Spotlight is trying to remove a file it cannot find... When I set all files to visible (with Terminal), there is NO file with the required name on my Mac.
What is the solution? How do I get rid of this problem? It creates other problem, like stopping any security update I try to install. It also makes saving files veeeery slow, and applications freeze with the spinning wheel for half a minute or more quite often.
I tried to reinstall MacOSX (archive and install), but it did not help. Then I had to authorize lots of plugins (for my music software) again, very annoying (and I lost some authorizations).
Any serious help is what I need.
Message was edited by: Helge Krabye

Helge Krabye wrote:
"...pple.launchd(1) (com.digidesign.fwfamily.helper (10466) posix_spawnp/"/Library/Application Support/ Digidesign/fireWire/DigidesignFireWireHelper", ...): No such file or directory"
Hi!
This is another problem that is not related to Spotlight...
launchd is the (sort of) mother of all processes on Mac OS X.
It looks for "LaunchDaemons" and "LaunchAgents" in two folders "/Library" and "/System/Library" (there should be subfolders with the name "LaunchDaemons" and "LaunchAgents").
Go into these subfolders and delete any trace that's left from Digidesign Protools...
That should help to get rid off the error messages.
Then look for other Console messages that start with "mds", "mdworker" or alike. The name of every process that is related to Spotlight starts with the letters "md" (metadata)...
Check with the utility Activity Monitor which process is hogging CPU and/or disk...
Cheers,
Walter

Safari logs me out of logged in web pages - not the same problem as other similar post - please read.

Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
Here is my machine info.
iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
Safari Version 5.1.7
I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
Any help or advice is apprecaited.

BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
The time it happened was sometime between 14:30 and 14:35
I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero

MSI TV Tuners - Please Read This Topic First!

Welcome to the forum! If you are looking for help with your MSI TV tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the Search function to see if your question has been answered already.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice.
Please bear in mind that this is a global forum, viewed by members from all over the world. Please make good use of the 'Location' field in your Profile, and please also state your TV signal type (eg PAL, NTSC) as well as source (aerial, cable, satellite). That should reduce chance of answers that are not really appropiate for your location.
MSI TV@nywhere Master PCI TV Tuner (MS8606)
MSI Product Support page - download drivers, manuals, software
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
TV@nywhere Video OK, But sound loss after 40 sec (solved)
Vox USB Tuner
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS
TV@nywhere Plus PCI
Problems with Windows Media Center
TV@nywhere Plus and Vista SP1
How to get audio from TV@nywhere Plus
TV@nywhere Plus remote issue solved!
TV@nywhere Plus - Vista Drivers required for remote control
TV@nywhere Plus and Windows 7
Theater 550PRO (PCI)
Theater 550PRO install issues
MegaSky 580 USB2
Mega Sky 580 and Windows Vista
Mega Sky 580 unavailable in MCE?
MSI MegaSky 580 Fix?
MegaSky 580 Installation Problems
Problems with MegaSky 580
New update for MegaSky 580
Weak reception from MegaSky, whats wrong?
Patches for PrestoPVR for MegaSky
DigiVOX USB2
DigiVOX and Windows XP x64 Edition
DigiVOX Mini II v3.0
DIGIVOX mini II V3.0 + Windows 7
Other useful topics
Windows XP Media Center Edition FAQ
Microsoft MPEG4 or DivX codec

I developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me

Adobe Support: Please Read, New Flash Not Working

Adobe, please read this. My Flash player is not working and I would be happy to help you troubleshoot. I have a completely fresh install of Windows XP on a Dell Laptop and the new Flash Player is not working. I am in the tech field so I will understand most of your requests...Here is my situation.
The problem began just after Christmas when I returned home from holidays and tried to watch videos, which I do all the time for both work and pleasure. Videos would not play in a watchable manner...I could hear audio but video was completely choppy and unwatchable. I researched and researched and implemented many suggestions but to no avail. Thus, I COMPLETELY rebuilt my system from scratch. (I needed to do this anyway since it had been 2 years.)
After the rebuild, on a completely fresh install of XP on a Dell D410 laptop (that was playing all videos just fine a week ago), I installed Firefox, went to youtube which prompted me to install Flash, and then had the exact same problem that I had before the complete reinstall of everything. There are scarecely any variables here other than the Dell Laptop, a standard Windows XP SP2 build, Firefox and Flash.
I think I have narrowed this problem down to two things. One, the new version of Flash.
It's choppy on youtube AND it's choppy on megavideo, the other place where I watch a lot videos.
I then tried on IE, which also prompted for the new version of flash, and also had the same problem. Chrome--same result.
However, this problem cannot be a universal problem with Flash otherwise nobody would be able to watch any videos onlline.
This leads me to the second problem, which a complete hypothesis but it seems to be the only thing left: my Dell laptop.
I have noticed that some of the other folks with reported problems, who mention their system type, are also using Dell laptops. Mine is an older d410, but as I said, it was running every video just fine up until a week or so ago when all of the sites forced me to install the new version of Flash. Most Dell laptops use a common video driver set and this is what is leading me to this conclusion.
So, could this be a problem with the new Flash and Dell laptops (or systems that use a common video driver)? As a reference point, my "display adapter" says "Mobile Intel (R) 915GM/GMS,910GML Express Chipset Family".
Viewing videos is part of my job (and entertainment) and I cannot do anything right now.
Someone out there...please hlep. Adobe, where are you? We are here providing you with all of the information that you need....

Thank you for this response. Apparently, Adobe does not provide support since this is a free product.
However, Adobe, I need your help.
In summary, I have a fresh build of Windows XP, SP2 on a Dell D410 and the Flash player does not work. This affects at least 50% of the sites I visit. Right now, I simply have the Flash Player uninstalled and can surf the net rapidly. Once I install it, I am back to a crawl and still cannot affectively watch any videos (they all have extreme video choppiness but the audio is fine).
I need your help, Adobe. Everything was working fine until 2 weeks ago. It is unfair of you to distribute a product like this, force everyone to use it, and have it not work for some of us.
So far, this free product has cost me hundreds of dollars as a good part of my job is reviewing videos.
Many have suggested that I buy a new computer to fix the problem.
Is this really necessary?
Adobe, I am a man in need...please help me...
(PS: I am not the only one. I have also entered my problem here http://www.google.pl/support/forum/p/youtube/thread?tid=6039f438d085295f&hl=en&fid=6039f43 8d085295f00047c7e3182b625 to no avail.
And I have done more research than you can imagine. Here are a number of sites where people are reporting problems with Flash:
Streaming videos are choppy all the sudden.... - CPUs - CPU-Components How do I resolve choppy/jerky video in Firefox? - YouTube Help Videos are choppy, Audio distorted. - YouTube Help DIYnot.com > Youtube stopped working "JavaScript turned off" youtube is not working - YouTube Help Flash sound stopped working. | Ask MetaFilter Anyone have problems with Youtube freezing? - Software - Non-Gaming - Discussion Forum | Eurogamer YouTube videos freeze after a second - Google Chrome Help My Comments on Video Problem Flash Player 10 memory leak!! Graphics - Customized computer manufacturer graphics driver is detected AfterDawn.com: Guides: How to play FLV files Adobe Forums: Adobe Support: Please Read, New Flash... Adobe Forums: Flash Stopped working
Obviously, I have still not found an answer to my problem. Please help me.
Thx,
Richard)

Problems with flash reader, flash reader

problems with flash reader, flash reader

flash reader is an App for iPhone, iPad and iPod. Do you mean Flash Player?
And, what is the problem?

When i try and open the auto cad Lt that i just downloaded i get this error The directory may be locked by another process or have been set Read Only. Directory: '/Users/hockaday' Please correct this problem and press OK to exit the application.

i get this error why i try and open the auto cad that i just downloaded
The directory may be locked by another process or have been set Read Only.
Directory: '/Users/hockaday'
Please correct this problem and press OK to exit the application.

I did install it in the admin account. Actually the computer has four accounts, one for my husband, where I installed it. One for me which also is set to admin, one is called TEST and has nothing in it and one is guest user.
I don't know how AutoCad is interfacing with the account. That is why I am not sure what to do about it. I read other threads in various places and some seemed to point to something having to do with having multiple users. The solutions were not clear. I was hoping someone else had this problem and could tell me what to do. I tried apple support but no help. I have not tried AutoCad yet as I assumed they wont help since this is a free educational version of their product.

Flash problem persists after 6 months...does this new information help?

Hi All!
I posted my problem almost 6 months ago, (I'll paste some of the info below to bring you up to date), but I STILL can't access only FOUR sites because I get a "Plugin file is missing" error, (after my previous post I found 2 other sites). I've been trying to solve this problem off & on, but I got more dedicated the other day because I'll be needing access to these sites very soon. I found some new information today that I hope will solve this awful problem; however, since I'm not very technically inclined I know I have to ask a "Flash Expert", so here goes....
I run Windows 8 & I use Mozilla exclusively. I updated Flash the other day to version 15.0.0.152 & I wanted to make sure the plugins had been updated, so I opened the "Flash Player Settings Manager" & under the "Advanced" tab it lists:
                                        NPAPI Plugin Version 15.0.0.152
                                        PPAPI Plugin Version Not installed
Is it significant that the PPAPI Plugin is "Not installed", or does Mozilla only require the NPAPI plugin?
My second question regards the installation of Flash. I know that when a program is problematic, it sometimes helps to uninstall & reinstall it...I recently had a game that went nuts & that's the procedure I had to do. Also, someone on Mozilla's forum said they were having a Flash issue & they went to your site & downloaded the .exe AND the .msi Installers from the Distribution Page, then manually installed them & their problem was resolved. Would this help me resolve MY Flash problem? If you think it's worth a try, do I have to uninstall Flash first?
Well, that's all the new info I have. I have to figure this out before December because that's when the nest-cam comes back on...I really have to get this problem fixed! I'll paste my previous post below, but I hope the uninstall/reinstall method will be the answer!
Thanks in advance for your help!
Best Regards,
DogPal
Here's my previous post:
Flash 13.0.0.214 does NOT work on some sites, but works fine on all others in Using Flash Player
Hi!
I watch several wildlife nest-cams every day running Windows 8 using Firefox 29.0.1, but yesterday morning, (after I'd already watched the 6 cams I view every day), I started getting a solid, black screen with, "Error loading plugin: Plugin file not found", on TWO of these sites.
My attempts to resolve the problem were:
1. Checked all the other web-cam sites I view daily, and there's only a problem on 2 of them.
2. Went to You Tube, Facebook & other similar sites and I can view streaming media.
3. Refreshed pages-when that didn't help, I closed & reopened Firefox & still 2 sites with "plugin loading error"
4. Completely shut-down my laptop & rebooted.
5. Did "System Restore" to earlier in the day when ALL web-cam sites were working.
6. Went to Adobe Flash site & verified that I had the most current version...I do, & I saw the animations on Flash site.
7. Verified my Flash Plugins in Firefox...AGAIN...they're all activated & up-to-date
8. Checked & re-checked ALL the web-cam sites I view every day, (for, at least the 10th time), and the
     same 2 sites are still showing the "Error loading plugin: Plugin file not found" on a black screen. Even
     though the video isn't seen the "chat" area is functioning, (I don't know if that's important, but I
     thought I should mention it).
9. I posted the issue on Firefox's Forum but no one has an answer since Flash works everywhere except
     for 2 sites.
I've tried everything I can think of to troubleshoot this, but as you can see, I've had no success in solving this "mystery".
As for the 2 sites I can't view, they are:
                                    http://www.pixcontroller.com/eagles/    And
                                    http://www.westmorelandconservancy.org/BlueBirdWebcam-1.htm
I've been watching these sites for MONTHS, so why I can't view them all of a sudden, well, I'm clueless, (I guess you already figured that out...ha ha ha). I was watching the 2 sites listed above early yesterday morning, then when I looked at one of the other cams I view and came back to these 2 sites, I got the "error message".
I hope you have a solution for me, as I'm desperate! I'm WAY behind in my documentation for these 2 sites, so hopefully you'll have an easy answer. If it's a technical thing, please use LOTS of details, as I'm not very technically inclined.
Thanks in advance for your help!
Best Regards,
DogPal
P.S. I just checked on another site that offers many different wildlife cams, & I CAN view the "Pittsburgh Bald Eagles" if I go through: http://www.ustream.tv/channel/pittsburgh-bald-eagles    I'm sure this means something, but since I don't understand this technical stuff I don't know what that is! (I told you I'm clueless!)

I definitely see a problem with the pixcontroller/eagles site on Windows 8.1. It works fine for me in the same version of Firefox on Windows 7. It's unclear to me whether it's a Firefox or a Flash Player issue, but I'm happy to look into it further and get some bugs filed.
As a temporary workaround, both sites work fine with Google Chrome and Internet Explorer.

Flash problems in Safari 2.0.1 - freezes with spinning wheel

Safari is freezing up on many sites which have flash content on them. One of the sites I am having the most problems with is MySpace.com
I have the most up to date Flash player and Safari. Running 10.4.2

Hello Pady
You use the cd only when you need to repair the Disk also known as Disc repair. Please read the Directives in the posts carefully , so that you understand them & then apply.
To run Repair Disk permissions you go.> Utilites>Disk Utility pick your Hard Drive & pick Repair Disk Permissions, you can get info after @ the tool bar at the Info button there will be messages when it runs in the window on the Utility. Really though reread the links so that you understand. Also read as much as you can hear at Discussion, that is what I do.
Also make sure that when you post you go to the most pertinent, place to post, where you will get the most attention.
I need to get to sleep.
if you have Qs post.
Regards - Eme

Explorer 7 + vista ultimate+ flash problem

Hello,
I have just intalled vista ultimate and I have a serious
problem with explorer 7 and pages with flash contains. Each time i
go through a flash contain with my mouse pointer the flash contains
starts to " flash" like crazy!!!
Do you why? is a a display problem, flash problem (version
9.028)??
Thanks in advance!!
Tatankha

Hi Mush25-
I had to step back from this and take a different approach.
While tossin' down some aspirins, I worked on my other niece's
laptop to upgrade to FP10 and troubleshoot. Identical to T2, but
with more Yahoo stuff: homepage, toolbar, chat, etc.. Turns out she
had already done it via Adobe yes/no prompt. No issues, everything
works OK. She said it only took a few minutes. I checked it out and
checked the settings, it's OK. Go figure.....
So, I will approach this as a problem with Manual
Downloading, which you and I did (not sure about Morac).
The HP desktop? We don't normally use IE7 on it, as it is AOL
Dial-up only, so few/no cookie issues on IE7. I kicked in IE7 and
FP10 worked OK. Well, as OK as dial-up video can be....
OK- a question for ya, this will tell me if I'm on the right
track: On your first FP10 upgrade, did you FIRST uninstall FP9, or
download/install OVER FP9? Please answer honestly....no judgements
here...
I didn't uninstall first- I admit it! I never do for Adobe
and Java, as I want to make sure the new version/upgrade works OK
before losing the old. I was on the old dial-up for too long, I
guess. There are exceptions, of course, like AVG.
Let me know.

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Ipod not connecting again, apple please read this.

First let me state that I made posts awhile back about my Ipod touch not being able to be recognized by itunes at all and just as a camera by windows. Now every single guide did nothing to help and the FEW people that posted had posted things I already did that did not help.
HOWEVER the version of Itunes that was prior to the one I just downloaded connected PERFECTLY with no issues.
But I just updates and wouldnt you know it, the connection problem is BACK. Apple please read this, the last version of Itunes had something different with how it connected to the Ipod...PLEASE bring that back, its so inconvenient not being able to connect to my own Ipod
If someone wants to post a reply that might help feel free...but everything on this website and even a few others not posted here have not worked, this is mostly me praying that Apple reads it...that tiny difference on how it connected made a huge difference with my computer.

Thanks. I worked out a simpler method of turning off the internet access - just switching off my wireless modem. Either way, this works and with the PC not connected to the internet, all three Apple devies will sync.
Thinking about it now, I had a similar problem a few versions ago which I recognised because with Home Sharing on and connected to the internet iTunes was trying to find files from someone in another hotel room who also sharing the hotel's wireless network. My devices would not sync then either. This seemed to be resolved with subsequent itunes upgrades until now ....
Thanks for the advice. Let's hope Apple's next 'update' actually updates itunes so it can sync Apple devices whilst simultaneously connected to the internet (not a big ask really).

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

Everybody PLEASE read.... Flash Problems

Similar Messages

Maybe you are looking for