Everyone 5 or 10 minutes I have to turn off and on the wifi.

Hi... Every 5 or 10 minutes I have to turn off and on the wifi if im using safari or anything else, like email or apps that need the wifi. Also if im not using the ipad and i pick it up to use it i first have to turn off and on the wifi otherwise it will not load the pages. I only have my ipad a month now and its been like it from the first day.Any solutions to this problem?

mhmediaonline I had tried that before but it didn't change anything. About two days I went to a cafeteria and I couldn't connect to the wifi but two friends who also have iPads connected without a problem. I also noticed yesterday that it took a whole day for the wifi to get stuck and that I didn't have to turn off and on the wifi,I just pressed Renew Lease and the wifi was ok. Have any other iPad users encountered the same problem? Any other suggestions?

Similar Messages

  • I constantly loss connection to my wifi home connection, have to turn off and on the wifi on my macbookpro (10.7.4) , any sugestion, thanks

    I constantly loss connection to my wifi home connection, have to turn off an on the wifi on my macbook pro (10.7.4) , any suggestion, thanks

    • WiFi, Internet problems, possible solutions

  • Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

    Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
    Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

  • I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do?

    I tried restoring my iPod, but it told me it was unsuccessful. Now it's stuck at the connect to iTunes screen. I've tried holding the home and lock buttons, just until the unit turns off, and until the unit restarts. What do i do? iTunes wont even recognize that an iPod is connected.

    Try to connect in reocvery mose, explained in this article:
    iOS: Unable to update or restore

  • TS4268 Updated iphone 4S with IOS6, now facetime and imessage won't work, says "waiting for activation", have reset, turned off and on, removed sim card, checked date/time, checked restrictions, checked email/ID, tried all troubleshooting advice on apple

    Updated iphone 4S with IOS 6, now facetime & imessage won't work, says "waiting for activation", have reset, turned off & on, removed sim card, checked restrictions, email/ID, date/time, tried all troubleshooting advice on apple support.  HELP!!!!

    Updated iphone 4S with IOS 6, now facetime & imessage won't work, says "waiting for activation", have reset, turned off & on, removed sim card, checked restrictions, email/ID, date/time, tried all troubleshooting advice on apple support.  HELP!!!!

  • How do I turn off and on the icon size slider bar at the lower right status bar of a folder window.

    I have been trying for days to help a friend with a new iMac to turn on the icon size slider bar that on my iMac appears at the bottom of ever folder when it is open when in the "view" > "icon" mode.  I cannot find anything that discusses this slider bar.  I can turn this status bar off and on on both my machine and my friends machine, but I cannot turn off or on the slider on either machine. 

    This did not help.  I am a Mac User since 1984 and generally I am never stymied buy the Mac OS, but this one has me.   I can open and close the lower status bar, as you described, and that works fine for me because I have the icon slider bar already there and it works fine; however when I open the lower status bar on my friends machine there is no icon size slider bar, and I can't seem to find out how to get it there, as it is on my machine or at all. The icon size can be controlled from the View menu, but as a photographer, it is really handy to have it at the bottom of the folder window.  Thanks for trying. 

  • Why do I have to turn off and on my HP office jet 7500A every time I want to print a page?  I can print one and imediatly try to print a second and it says it cant be found on the network.

    Since going up to Lion I am having problems with my HP Officejet 7500A printer.  It is on the network wirrelessly.  After every page I have to turn the printer off and back on again because my mac cant find the printer on the network.  The windows mechines here can still find it, but not my Mac Pro.  What is going on?
    Obviously I have it set up right because I can print to it.  problem is my mac thinks it goes off line every time I tell it to print another document. 
    Anyone know of a fix?
    Thanks!

    Lion may have replaced files that partially made up your printer drivers. Either way, HP saw fit to make a new set of drivers specifically for 10.7 so you may want to use it simply to avoid any bugs tehy found.
    Get it here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-98095-2 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
    Hope I helped

  • HT201412 My husbands ipad is frozen have tried turning off and on again any suggestions please

    My husbands ipad is frozen we have tried turning it off and on again any other suggestions please

    Did you reboot?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have to turn off and on Home Sharing for things to work, why?

    I have three AT2 (latest firmware) in the house, all on wifi through an airport extreme. I have a windows 7 box in the basement hardwired to the airport extreme as the server. Everything is fine until i either restart the windows 7 box or restart itunes. When ever i have to do either, i have to goto the at2 and go into home sharing setting and turn it off and then back on for my library to come up. It works almost everytime but its a little annoying considering it has to be done on all three at2. I dont have a problem with it as much as my kids who are too young to firgure it out. But once i do turn it off and then back on, everything is fine until the next time i either restart the windows 7 box or restart itunes. Any ideas?

    in addition, check out this link:
    Troubleshooting security software issues
    as well, see this discussion concerning bonjour being a possible culprit.

  • HT4245 My IMessage send button is grayed out and I have tried everything like: turning off and on the subject field button and I really want to use my IMessage.

    Please I want an answer asap and by the way I live in Egypt.

    Certainly not.  I know you are trying to be helpful.  I've been around a bit longer and have seen many of these subjects pop up, so I was aware that Egypt and iMessage has been problematic.  Nothing more than that. 
    Trust me, when I first started here, the top members of the forum, corrected me often.  I always took it as they are more knowledgeable and I learned from them.

  • I keep getting the spinning ball and have to turn off and then turn on again

    Hello,
    I keep getting the spinning ball and however long I leave it it still continues.  The only way to continue is to turn off, wait and then turn on again.
    I am by no means an expert so would appreciate any help.
    Many thanks
    Sue

    Sue,
    I would recommend carefully reading this article to trouble shoot your problem.
    http://www.thexlab.com/faqs/sbbod.html

  • Is there a way to turn off and On the isight camera or app to do it ?????

    Hi
    Does anyone know either of a Simple way to Turn off the isight camera on a Macbook pro (3.1 model with Snow leopard) or a simple program or Widget to do this ??
    I have already Googled this but cannot find much - except disable certain files, or a Applescript by Techslaves.org called isight disabler , which seems great except I have to run applescript each time run this script, put in password, then select !
    SO is there a Basic app or even a Way of making the isight disabler work like a simple app - or a way to do with Mac's settings ??
    Any help is Appriciated
    Thanks Mark

    Globalmark wrote:
    Hi
    Does anyone know either of a Simple way to Turn off the isight camera on a Macbook pro (3.1 model with Snow leopard) or a simple program or Widget to do this ??
    I have already Googled this but cannot find much - except disable certain files, or a Applescript by Techslaves.org called isight disabler , which seems great except I have to run applescript each time run this script, put in password, then select !
    SO is there a Basic app or even a Way of making the isight disabler work like a simple app - or a way to do with Mac's settings ??
    Any help is Appriciated
    Thanks Mark
    Barring some unusual circumstance, there should be no need to disable your built-in iSight because YOU decide when to use your iSight.
    Some apps such as iChat allow you to enable and disable the webcam from menu commands.
    Other apps such as Photo Booth only use the camera when you click the button.
    However, if you REALLY want to disable, scripts like this one can easily disable and enable iSight.
      http://techslaves.org/index.php?page=62
    However, be aware that it simultaneously disables ALL USB webcams when active.
    Although I do not recommend it, you can manually disable your built-in iSight by removing the "QuickTimeUSBVDCDIgitizer.component" file from your computer's HardDriveName > System > Library > QuickTime folder and restarting your Mac. Your built-in iSight should no longer work with any app.
    P.S. Manually moving, renaming, or deleting files outside your Username/Documents folder
       is generally a BAD idea unless you KNOW how it will effect OS X.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • My laptop turned off and interrupted the iOS 7 update on my phone.

    Now it's just showing a black screen with the apple and loading bar underneath it but it doesn't load. I have tons of pictures and don't want to lose them. Help!

    Siri did not work on the iPhone 4/iPad 2 under iOS 6.x.x
    Siri will not work on the iPhone 4/iPad 2 under iOS 7.x.x
    iOS 7's hardware demands are even greater than iOS 6's
    As others have stated here, it will not work.

  • HT201317 how do I get photos to transfer on the cloud from my iphone to my ipad? I went through the settings above and have everything turned on and am on wifi?

    I am trying to load photos from my iphone onto my ipad.  I am on wifi and I have turned on my icloud account and have 15gigs storage but the photos aren't transfering.   Help! What am I doing wrong?

    Welcome to the Apple Community.
    Photostream will only sync photos that are taken on or added to the device after photostream was activated on that device.

  • Ipod nano 7th: Screen flashes white (turns off) and stops the music.

    I just got a brand new Ipod nano 7th: Less than 10 seconds after the song starts playing the screen flashes white, the apple logo shows up and it returns to 'home' screen. Battery is full. Tried to restart but that didnt help!
    What could be the problem?

    Hi joannefromhkg,
    If your iPod nano (7th generation) will not turn on at all I would suggest that you troubleshoot using the steps in this article - 
    iPod nano (7th generation): Hardware troubleshooting
    Specifically -
    Follow these steps if your iPod a power-related issue.
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting it while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Home button for at least six seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    And -
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for