Everyone with a santa rosa macbook pro..

did the wireless fix sort the issues out!? i really need to no. without the wireless working on my macbook pro when i get it in a week..itl be useless!
everyone whats going on???

MBP Santa Rosa 17", now four days old, officially. Forgot completely about all the wireless/networking problems cited here, and, therefore, just joined my household network (LinkSys) Wednesday afternoon without thinking.
Everything went perfectly.
Took said MBP to another location this weekend (wi-fi'd marina), again forgetting about the potential problem joining that setup . . . but no difficulty again.
Hope I'm not the exception. LOVE THE NEW MACHINE thus far: no display problems, no wi-fi problems, no kernal crashes, no nothing. Fingers crossed and smile on mouth!

Similar Messages

  • Design Limitation On ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz

    While searching the Internet for answers to my new $2500.00 MBP headphone (output jack) has audible hissing sounds I found several posts on Macrumors.com and macintouch.com to explain the design Limitation/Problem. To summarize:
    The Problem
    The issue has three components, as described in this MacinTouch Report:
    - A low hiss that is constant whenever the audio circuitry is on
    - Static that occurs whenever anything is playing... even something quiet.
    - A series of high-pitched noises that occur somewhat randomly. The best comparison I've seen is that it's like listening to those hearing tests where you raise your hand when you hear a tone.
    The problem only occurs with low-impedance headphones (more on this below).
    Some Facts
    - The problem occurs on ALL Santa Rosa MacBook Pros, 2.2 and 2.4 GHz. It is a design flaw on Apple's part, and returning your machine for a new one will not help. There are plenty of people who say they can't hear the noise, but those people either have high-impedance headphones or speakers, or just don't have very good hearing.
    - Only Santa Rosa MacBook Pros seem to be affected by this particular static problem. I've seen some reports of other machines having audio issues, but they are always different.
    - The 'Audio Update 2007-001' that Apple released about two weeks ago doesn't fix it. It does fix a popping problem on all Intel Macs (including the SR MBPs), so it's worth installing, but that is a different problem than this one.
    - It does seem to be an Apple-specific problem; I've been unable to find any other reports of non-Apple Santa Rosa notebooks having the same problem.
    Just wondering if anyone else has had this issue with their new MBP?
    Thanks,
    B

    I experience the issue as well both in OS X and when I'm in Windows Vista.
    Whenever a program uses audio, there is an annoying high-pitched hissing noise from the built-in speakers.
    Of course the severity of the problem depends on the individual hearing ability, but everyone I have asked, have been able to hear the noise.
    Apple is known to be the first choice of audio professionals; however this problem is below that standard.

  • Xcode3 Completely Freezes Leopard 10.5.3 on Santa Rosa MacBook Pro

    Hi
    I am recently workin on a software project on Xcode3 (with all the latest Updates)
    with great disappointments i found out that very often (not every day or every time i use it) while in the process of editing source files the leopard user interface completely freezes (something like a kernel panic happens) and the only thing i can do is to force a shutdown.
    it happened to me at least 10 times (sometimes more than one time a-day). i have had user interface freezes before while using other applications but that i'm not having them anymore, the problem clearly re emerged by using xcode (which i never used before)
    i suspect it has to do with bugs in the graphics drivers for the GeForce 8600M GT graphics chip that is used by my Core 2 Duo Santa Rosa Macbook Pro (2.2 Ghz) and that Mac Os 10.5.3 Still has not fixed
    Anyone has the same problem? or any idea?
    Thanks

    It happened once again while i was copying (Apple-C) a selected line of code on the Xcode Source file Editor
    I officially submitted tha Bug Report to Apple (Bug ID# 5985528).
    In Responce to the System User Interface Freeze i obtained a SystemUIServer Crash Report of which i report the first lines
    Process: SystemUIServer [158]
    Path: /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
    Identifier: com.apple.systemuiserver
    Version: 1.5.4 (248.1)
    Build Info: SystemUIServer-2480100~8
    Code Type: X86 (Native)
    Parent Process: launchd [110]
    Date/Time: 2008-06-04 19:03:09.759 +0200
    OS Version: Mac OS X 10.5.3 (9D34)
    Report Version: 6
    Exception Type: EXCBADACCESS (SIGSEGV)
    Exception Codes: KERNINVALIDADDRESS at 0x000000000da2384f
    Crashed Thread: 1
    Thread 1 Crashed:
    0 ??? 0x0da2384f 0 + 228735055
    1 ...e.ImageCaptureNotifications 0x000d1a65 _StaticICNRecognizedDevice + 4052
    2 ...e.ImageCaptureNotifications 0x000d3f86 _StaticProcessIOObjectsArray + 315
    3 libSystem.B.dylib 0x940a26f5 pthreadstart + 321
    4 libSystem.B.dylib 0x940a25b2 thread_start + 34

  • What discs come with the current (Santa Rosa) macbook pros?

    I own a Rev1 Macbook Pro (but that's not really important). I convinced my friend to get a new Macbook Pro. She loves it. But she did something somewhat silly. She asked me what the discs were for that were included in her box and I told her they are only to reinstall the included software. Anyway, she was looking for Comic Life and she concluded it must be on the cds, so she ended up reinstalling Mac OS X! But now the installer is asking for Disc 2 which she can't seem to find...
    Now it was my understanding that the OS came on 1 dvd, not two. There are additional parts on another disc for things like Xcode and whatnot, but the main installer should only need 1 disc, correct? Does anyone happen to recall where the second disc is found? I seem to believe it's actually in the same sleve as disc one but she says it isn't.
    So yeah maybe the packaging has changed or maybe my memory isn't that great. Any suggestions?
    Thanks!

    I own a Rev1 Macbook Pro *but that's not really important*.
    It may be important, if she asks to borrow your DVDs. The OS X Install DVDs for the Intel Macs are machine- and build-specific. So your Install DVDs for a pre-Santa Rosa MBP will most likely not work on an SR machine.
    However, if she's missing disc(s) she can call AppleCare and they will send her replacement(s) for a nominal charge (something like $30, I think).
    You might also point her to this link:
    http://docs.info.apple.com/article.html?artnum=301229
    which describes how to do a custom installation. For apps, etc., not listed there, she could use Pacifist:
    http://www.charlessoft.com/
    to extract them from the Install DVDs.
    Hope this helps...
    Ps. the iLife suite that was pre-installed on the Mac is located on Install DVD 2.

  • Fn + delete, other shortcuts not working with new Santa Rosa Macbooks?

    I recently received a brand new Macbook (Santa Rosa platform) as a replacement for my defunct old Macbook (which was the previous generation). I've noticed in bootcamp, Fn+Delete no longer serves as a shortcut for the Del key in windows. Nor does Fn+Up or Fn+Down serve as PgUp, PgDn respectively. Is this intentional, or something that I can get a fix for?

    I don't know if my solution will help everyone else, but I am using BootCamp 1.4b and recently reformatted my Windows drive. I had the Mac drivers for this backed up on my Windows PC and I used my PC to burn them to disk. After troubleshooting the problem described above for many hours (or at least one with the same symptoms), I found that the keyboard driver on my cd was corrupt (stupid CD-RWs never work right.) Since I had my ethernet up and running at that point, I was able to use the Windows on my Mac to pull the drivers off my network share and then I deleted the Human Interface Devices as described above and then reran the Mac driver setup program. After I restarted, everything worked fine.
    WARNING: Make sure you can do everything you need to do using only the mouse since the keyboard will not function at all after deleting the devices.

  • Can a T61 with a Santa Rosa platform run Vist 64-bit, or do you need a Penryn platform?

    Can a T61 with a Santa Rosa platform run Vista 64-bit, or do you need a Penryn platform?
    I have been told that the Santa Rosa platform cannot handle Vista 64-bit.
    Thank you!
    MacBook Pro, with an aluminum unibody enclosure **As of September 15, 2008, our company has completely switched to Apple. Having used ThinkPad products for over 10 years, we had desperately tried to find just one reason to continue using these products, to no avail. We are of the view that ThinkPads are no longer premium products. We wish you the best of luck with your ThinkPad! Happy computing…**
    Solved!
    Go to Solution.

    I thank you very much, Steve and Don!
    I had been speaking with a Lenovo tech support agent earlier today, who had advised, "a Santa Rosa platform cannot run Vista 64-bit".
    I know. It did not make sense to me either. I guess the Lenovo agent was a newbie.
    I appreciate the clarification!
    PS: I wish that I could have both responses marked as solutions.
    Message Edited by LukeD on 07-08-2008 04:44 PM
    MacBook Pro, with an aluminum unibody enclosure **As of September 15, 2008, our company has completely switched to Apple. Having used ThinkPad products for over 10 years, we had desperately tried to find just one reason to continue using these products, to no avail. We are of the view that ThinkPads are no longer premium products. We wish you the best of luck with your ThinkPad! Happy computing…**

  • Issues with Trackpad - Physical click - Macbook pro 13"

    Hi everyone!
    I have a problem with my trackpad, my macbook pro its about one year old and i rarely use a physical click, few months ago i had to use bootcamp with windows xp and i use the physical click there, i use it about a month only.
    Now i have to press harder to use it (in MacOS snow leopard) because if i click like always nothing happen i hear the click but no actions on my display, the soft click functions work properly but im worried about the physical click.
    Sorry for my terrible English and thank you in advance.
    Regards!

    Hi!
    Well for me theres 2 types of click,
    1. one when u click and sounds (this one is pressing harder the trackpad)
    2. another is softer when just need to put ur finger over the trackpad.
    i use more the second one, thats why i say i rarely use the first one.
    Thanks for answering
    Regards

  • Having start-up issues with my 1st gen Macbook Pro

    Hi everyone. I just started having start-up issues with my first generation Macbook Pro. It was working fine the other day when I last used it, but today I went to use it and it wont load up to my desktop...? It starts up (grey screen with the little swirly bar under the apple,) then it goes to a blue screen, then my background and dock appear, then (before any of my desktop files even show up,) it goes to a blue screen (that brightens up and then dims a little,) and it just keeps showing this with a little swirly progress symbol (shows when the screen is darker blue, then disappears when the screen is a brighter blue.) I've included a video that I took with my iPhone to show it situation. Any ideas as to what's wrong with it? Thanks in advance!
    http://youtu.be/oDCfHM-Zoes

    Safe Boot by restarting your computer while holding down the "shift" key.  Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
    As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory.  A corrupt cache here can cause the blue screen crash.  Once you restart normally, the cache will be recreated.  This should take care of the issue.
    http://support.apple.com/kb/HT1564
    http://support.apple.com/kb/HT1455
    Use Software Update to update your os to 10.6.8 and anything else that needs to be updated.

  • Santa rosa macbook+4gb ram PLZ HELPPPPP

    i have a santa rosa macbook (on the box it says it supports up to 4gb) and i was trying to upgrade ram to 4gb from the default 1gb. So i bought 2X 2gb comstar ram from futureshop.
    the problem is that when i try to put both of the new sticks for a total of 4 gb, the macbook will turn on but the screen will be black and the sleep indicator light on.
    however, when i only put one 2gb in and leave the other slot filled with default 512mb stick for a total of 2.5gb, it will turn on properly and recognize it as 2.5 gb.
    I've tried switching ram and slots numerously to determine if it's the slot or ram fault, but it doesn't work whever it's 4gb and works if it's 2.5gb.

    Hello everybody,
    Today unfortunately I got 4GB (2x2GB) Corsair low latency (VSA4GSDSKIT667C4) and I'm having the same problem as some of you, the system just handle up to 3GB. I tried many different combination but no luck at the moment. What is going on? Corsair is selling something that doesn't have any guarantee. I'm very disappointed and upset.
    My MacBook specs:
    Model Name: MacBook
    Model Identifier: MacBook3,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: *3 GB* (old module + 2GB corsair)
    Bus Speed: 800 MHz
    Boot ROM Version: MB31.008E.B02
    SMC Version: 1.24f2
    Serial Number: W87503EHZ66
    Chipset Model: GMA X3100
    Good luck!

  • Identifying a Santa Rosa MacBook

    Hi
    I plan on buying a blackbook in the next couple of days from an Apple Reseller (military exchange store). ITs the same price as the one on the Apple website, but I want to make sure the mac I get is the most recent...and the one that their shipping directly from Apple.
    Are there any was of telling if it is in fact a Santa Rosa macbook? It does come with Leopard, I know that much.
    thanks.

    Apple MacBook MB063LL/A 13.3" Notebook PC (2.16 GHz Intel Core 2 Duo Processor, 1 GB RAM, 160 GB Hard Drive, 8x SuperDrive) Black. GMA 950 graphics processor with 64MB of DDR2 SDRAM shared with main memory
    Apple MacBook MB063LL/B 13.3" Notebook PC (2.2 GHz Intel Core 2 Duo Processor, 1 GB RAM, 160 GB Hard Drive, 8x Super Drive) Black Intel GMA X3100 graphics processor with 144MB of DDR2 SDRAM shared with main memory
    As you can see the Santa Rosa is all new and lots more bang for your buck.

  • New Santa Rosa Macbook, No wifi via bootcamp??

    Anyone know how to fix this?
    Ethernet works, but no wifi. I installed Vista via bootcamp on a new Santa Rosa Macbook. It says that the wireless adapter is Broadcom N. But it wil not connect to wifi, it shows all the networks, but I cannot connect.
    Anyone help? I don't even know which Broadcom chip it is to upgrade the driver.
    I'm desperate here.

    It should work, but.... I have the "late 2006" Macbook, which has an Atheros based radio, and ironically, it makes more stable Wi-Fi connections in Vista than OSX.
    Asking the obvious, I'm presuming you installed the driver disc that boot camp asks you to burn.
    In Vista, go to Connect To... on the start menu, then click Manage My Connections. You should be able to see a diagram with your computer, your LAN router and the Internet. If there is a red X on any part of the diagram, you should be able to right click the X and have Windows diagnose and/or try to repair the connection. Try deleting the problem connection(s), then search for networks again and re-join.
    Right clicking in windows is putting two fingers on the touch pad, then clicking the button - that should get you the pop up context menu for where you pointer is touching.
    Another thing you can try is to open a command window, then do "ipconfig /all | more" to see if your card has been assigned an IP address. You can also note your card's MAC address to see if the router(s) have seen your MAC address.
    In some ways, Vista's networking controls are better, but if you're used to XP, it can be frustrating to figure out where things moved.
    Bill

  • Hi, I have problem with starting up my macbook pro, the gray screen coming and the circle still turning

    hi
    Could u please help me with the problem that I have with starting up my macbook pro?

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro?

    How do I get my new 27" Thunderbolt Display to work with my mid-2010 Macbook Pro? Or am I SOL?
    Hardware Overview:
      Model Name:    MacBook Pro
      Model Identifier:    MacBookPro6,1
      Processor Name:    Intel Core i7
      Processor Speed:    2.8 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache (per Core):    256 KB
      L3 Cache:    4 MB
      Memory:    8 GB
      Processor Interconnect Speed:    4.8 GT/s
      Boot ROM Version:    MBP61.0057.B0F
      SMC Version (system):    1.57f18

    You can't. Theoretically, Thunderbolt devices that only transfer video and audio should work with Mini DisplayPort MacBooks like yours, but it's not the case of the Thunderbolt Display. Its firmware doesn't allow it to be used with non-Thunderbolt Macs, so you can't use the Thunderbolt Display with the Mid 2010 MacBook Pro.
    Instead, you have to look for another screen, or you can get an adapter and connect the MacBook Pro to a TV

  • How to Force mac Thunderbolt External Display with Integrated GPU for Macbook Pro 2012?

    I have been getting GPU Panic whenever I use external Thunderbolt Display.
    Not sure whether this is software after(Mavericks) or hardware, if anybody could shed some light I would appreciate it.
    The Current Discrete GPU will only work for few seconds 10 sec max before it became blank and require you to force shutdown. This also happened even without external display Blank and GPU Panic upon restart. So I suspected either the discrete GPU failure or software in Mavericks.
    But at the moment I'm looking for workaround so I can use the intel intergrated GPU to use my Mac Thunderbolt External Display.
    Thank you in advance for any input.
      Anonymous UUID:       08E3F48E-64B8-B380-1B7A-A676656BE0A6
    Fri Nov  1 21:55:27 2013
    panic(cpu 0 caller 0xffffff7f8876bfac): "GPU Panic: [<None>] 4 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x102c00000 0xffffff80fe1b8000 0x0e7150a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80fd8b3540 : 0xffffff8006422f69
    0xffffff80fd8b35c0 : 0xffffff7f8876bfac
    0xffffff80fd8b3690 : 0xffffff7f87020cf8
    0xffffff80fd8b3750 : 0xffffff7f870ede26
    0xffffff80fd8b3790 : 0xffffff7f870ede84
    0xffffff80fd8b3800 : 0xffffff7f87318f31
    0xffffff80fd8b3870 : 0xffffff7f87111011
    0xffffff80fd8b3890 : 0xffffff7f87027841
    0xffffff80fd8b3940 : 0xffffff7f87025362
    0xffffff80fd8b3b40 : 0xffffff7f870263cd
    0xffffff80fd8b3c20 : 0xffffff7f86fd365a
    0xffffff80fd8b3db0 : 0xffffff7f86fd23e4
    0xffffff80fd8b3dd0 : 0xffffff7f8873e812
    0xffffff80fd8b3eb0 : 0xffffff7f8873e6ee
    0xffffff80fd8b3f00 : 0xffffff7f8873d55e
    0xffffff80fd8b3f20 : 0xffffff800644a15a
    0xffffff80fd8b3fb0 : 0xffffff80064d6aa7
          Kernel Extensions in backtrace:
             com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f8875e000->0xffffff7f88770fff
                dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f88756000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f8772a000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f88759000
             com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f86fd0000->0xffffff7f8723afff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
                dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f86fc0000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
             com.apple.nvidia.driver.NVDAGK100Hal(8.1.8)[3CF8C2FA-83E6-39E3-A5B7-C7CC839B8C7 5]@0xffffff7f87245000->0xffffff7f873f4fff
                dependency: com.apple.nvidia.driver.NVDAResman(8.1.8)[3A2A3C2D-E129-3190-A682-E831B38F0FBF] @0xffffff7f86fd0000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
             com.apple.driver.AGPM(100.14.11)[087FCB18-55FA-300E-9D22-DDE636C74BE1]@0xffffff 7f8873c000->0xffffff7f8874dfff
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f86aba000
                dependency: com.apple.driver.IOPlatformPluginFamily(5.5.1d27)[C86803C1-60BC-386D-9C54-2E6D7 4CCEA74]@0xffffff7f87733000
                dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f86fc0000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f86f7d000
                dependency: com.apple.AppleGraphicsDeviceControl(3.4.12)[C171C5AF-1BB6-385A-A4DB-3ED5626711 1E]@0xffffff7f8841c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000006200000
    Kernel text base: 0xffffff8006400000
    System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
    System uptime in nanoseconds: 88932950458
    last loaded kext at 12260883008: com.intego.Family-Protector.extension     1770 (addr 0xffffff7f8888a000, size 53248)
    loaded kexts:
    com.intego.Family-Protector.extension     1770
    com.intego.virusbarrier.kext.realtime     775
    com.intego.netbarrier.kext.network     653
    com.intego.netbarrier.kext.process     653
    com.intego.netbarrier.kext.monitor     653
    com.rim.driver.BlackBerryVirtualPrivateNetwork     1.0.15
    com.parallels.virtualsound     1.0 22731.929773
    com.Cycling74.driver.Soundflower     1.6.6
    com.veldom.driver.EM_Usb     1.0.48
    com.cyberic.SmoothMouse     7
    com.intego.Family-Protector.safe-boot     1770
    com.rim.driver.BlackBerryUSBDriverInt     0.0.97
    com.apple.filesystems.autofs     3.0
    com.apple.driver.AppleHWSensor     1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager     4.2.0f6
    com.apple.driver.AGPM     100.14.11
    com.apple.driver.ApplePlatformEnabler     2.0.9d1
    com.apple.driver.X86PlatformShim     1.0.0
    com.apple.driver.AppleMikeyHIDDriver     124
    com.apple.driver.AudioAUUC     1.60
    com.apple.iokit.IOUserEthernet     1.0.0d1
    com.apple.driver.AppleHDAHardwareConfigDriver     2.5.2fc2
    com.apple.driver.AppleUpstreamUserClient     3.5.13
    com.apple.Dont_Steal_Mac_OS_X     7.0.0
    com.apple.driver.AppleHDA     2.5.2fc2
    com.apple.driver.AppleHWAccess     1
    com.apple.iokit.IOBluetoothUSBDFU     4.2.0f6
    com.apple.driver.AppleIntelHD4000Graphics     8.1.8
    com.apple.driver.AppleMikeyDriver     2.5.2fc2
    com.apple.GeForce     8.1.8
    com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
    com.apple.driver.AppleLPC     1.7.0
    com.apple.driver.AppleSMCLMU     2.0.4d1
    com.apple.driver.AppleMuxControl     3.4.12
    com.apple.driver.AppleBacklight     170.3.5
    com.apple.driver.AppleMCCSControl     1.1.12
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.2.0f6
    com.apple.driver.AppleSMCPDRC     1.0.0
    com.apple.driver.AppleIntelFramebufferCapri     8.1.8
    com.apple.nvidia.NVDAStartup     8.1.8
    com.apple.driver.AppleThunderboltIP     1.0.10
    com.apple.driver.AppleUSBTCButtons     240.2
    com.apple.driver.AppleUSBTCKeyEventDriver     240.2
    com.apple.driver.AppleUSBTCKeyboard     240.2
    com.apple.driver.AppleFileSystemDriver     3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
    com.apple.BootCache     35
    com.apple.driver.XsanFilter     404
    com.apple.iokit.IOAHCIBlockStorage     2.4.0
    com.apple.driver.AppleUSBHub     650.4.4
    com.apple.driver.AppleSDXC     1.4.0
    com.apple.iokit.AppleBCM5701Ethernet     3.6.9b9
    com.apple.driver.AirPort.Brcm4331     700.20.22
    com.apple.driver.AppleAHCIPort     2.9.5
    com.apple.driver.AppleUSBEHCI     650.4.1
    com.apple.driver.AppleUSBXHCI     650.4.3
    com.apple.driver.AppleSmartBatteryManager     161.0.0
    com.apple.driver.AppleRTC     2.0
    com.apple.driver.AppleACPIButtons     2.0
    com.apple.driver.AppleHPET     1.8
    com.apple.driver.AppleSMBIOS     2.0
    com.apple.driver.AppleACPIEC     2.0
    com.apple.driver.AppleAPIC     1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient     216.0.0
    com.apple.driver.AppleIntelCPUPowerManagement     216.0.0
    com.apple.nke.applicationfirewall     153
    com.apple.security.quarantine     3
    com.apple.kext.triggers     1.0
    com.apple.iokit.IOSerialFamily     10.0.7
    com.apple.iokit.IOBluetoothFamily     4.2.0f6
    com.apple.driver.DspFuncLib     2.5.2fc2
    com.apple.vecLib.kext     1.0.0
    com.apple.iokit.IOAudioFamily     1.9.4fc11
    com.apple.kext.OSvKernDSPLib     1.14
    com.apple.iokit.IOSurface     91
    com.apple.iokit.IOAcceleratorFamily     98.7.1
    com.apple.nvidia.driver.NVDAGK100Hal     8.1.8
    com.apple.nvidia.driver.NVDAResman     8.1.8
    com.apple.driver.IOPlatformPluginLegacy     1.0.0
    com.apple.driver.X86PlatformPlugin     1.0.0
    com.apple.driver.AppleGraphicsControl     3.4.12
    com.apple.driver.AppleBacklightExpert     1.0.4
    com.apple.driver.AppleSMBusController     1.0.11d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport     4.2.0f6
    com.apple.driver.AppleSMBusPCI     1.0.12d1
    com.apple.driver.IOPlatformPluginFamily     5.5.1d27
    com.apple.iokit.IOAcceleratorFamily2     98.7.1
    com.apple.AppleGraphicsDeviceControl     3.4.12
    com.apple.driver.AppleSMC     3.1.6d1
    com.apple.iokit.IONDRVSupport     2.3.6
    com.apple.driver.AppleHDAController     2.5.2fc2
    com.apple.iokit.IOGraphicsFamily     2.3.6
    com.apple.iokit.IOHDAFamily     2.5.2fc2
    com.apple.driver.AppleThunderboltEDMSink     1.2.1
    com.apple.driver.AppleThunderboltDPOutAdapter     2.5.0
    com.apple.driver.AppleUSBMultitouch     240.6
    com.apple.iokit.IOUSBHIDDriver     650.4.4
    com.apple.driver.AppleThunderboltDPInAdapter     2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily     2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter     1.4.0
    com.apple.driver.AppleUSBMergeNub     650.4.0
    com.apple.driver.AppleThunderboltNHI     1.9.2
    com.apple.iokit.IOThunderboltFamily     2.8.5
    com.apple.iokit.IOEthernetAVBController     1.0.3b3
    com.apple.driver.mDNSOffloadUserClient     1.0.1b4
    com.apple.iokit.IO80211Family     600.34
    com.apple.iokit.IONetworkingFamily     3.2
    com.apple.iokit.IOUSBUserClient     650.4.4
    com.apple.iokit.IOAHCIFamily     2.6.0
    com.apple.driver.AppleEFINVRAM     2.0
    com.apple.driver.AppleEFIRuntime     2.0
    com.apple.iokit.IOHIDFamily     2.0.0
    com.apple.iokit.IOSMBusFamily     1.1
    com.apple.driver.AppleKeyStore     2
    com.apple.driver.DiskImages     371.1
    com.apple.iokit.IOReportFamily     21
    com.apple.iokit.IOUSBMassStorageClass     3.6.0
    com.apple.driver.AppleUSBComposite     650.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice     3.6.0
    com.apple.iokit.IOStorageFamily     1.9
    com.apple.iokit.IOSCSIArchitectureModelFamily     3.6.0
    com.apple.iokit.IOUSBFamily     650.4.4
    com.apple.driver.AppleFDEKeyStore     28.30
    com.apple.security.sandbox     278.10
    com.apple.kext.AppleMatch     1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.AppleACPIPlatform     2.0
    com.apple.iokit.IOPCIFamily     2.8
    com.apple.iokit.IOACPIFamily     1.4
    com.apple.kec.pthread     1
    com.apple.kec.corecrypto     1.0
    Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.3f36
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM512E, 500.28 GB
    USB Device: Hub
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4

    I have the same problem with an early 2013 macbook pro. gfxCardStatus ( http://gfx.io/ ) will allow you to force integrated and not do dynamic switching, however the external display still doesn't work.

Maybe you are looking for